Procedure is exeuted but in package it is failed

HI frnz,
i was created one procedure,but it is exuted fine and once i call the same procedure in execute sql task in ssis it shoul fail the task,and it will show the follwing error msg
[Execute SQL Task] Error: Executing the query "EXEC [dbo].RegionSafety" failed with the following error:
"The statement has been terminated.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly,
parameters not set correctly, or connection not established correctly.
can any one please help me out for this one.ASAP...
Thanks

Hi Ychinnari,
Does the stored procedure have any input parameters? The issue may occur because of the incorrect parameters mapping between the SSIS package variables and the stored procedure input parameters. For an Execute SQL Task that executes a stored procedure which
has input parameters, the following rules apply:
Besides, pay more attention to the connection type you use in the Execute SQL Task. If you use ADO.NET connection type but use OleDb Data Provider or Odbc Data Provider, you should use the rule that applies to OLEDB or ODBC connection type in the above tables.
Reference:
http://technet.microsoft.com/en-us/library/cc280502.aspx
If the issue persists, please post more information about the Execute SQL Task settings as well as the full error message.
Regards,
Mike Yin
TechNet Community Support

Similar Messages

I posted in Mac pro Eplehust and Oslo in early June to change videokart (which has changed six months ago) got my Mac a month by mail, with the terrible damage the body, but the packaging in which he lay was not damaged. I sent him back to change t

I have posted in Mac pro Eplehust and Oslo in early June to change videokart (which has changed six months ago) got my Mac a month by mail, with the terrible damage the body, but the packaging in which he lay was not damaged. I sent him back to change the computer, 4 weeks, I changed it and checked 2 more weeks. as a result of three days ago, got back, more than half the programs crash, I can not open or closed CDrom, some programs do not come off or stop, and stop responding commands, turn it off only mechanically, not any excuses, I did not get to the store, what should I do?
My patience is crowded, nerves on edge, I have lost my time with the worst service of my life, the only thing I see its the draw Eplehuset and apple to court.
my e-mail - [email protected]

While writing I made a mistake... It is true I could become aware of the Scorpio incompatibility.
I also tried the same identical procedure with a Seagate one. This disk and the same procedure was performed by some people I know on many MacBookPro Mid-2010 and everything was OK.
We do not understand why this problenm occurs.
Furthermore, If I installed the system on the broken HDD (that works, but sometimes it fails so badly and makes the system experience kernel panic) I could boot from it.
I guess it is because of the **** Apple FIrmware written on the label.
Is it possible that I cannot manage to boot from my new HDD because it has not a "special" feature on it that makes it compatible with apple??? Why making things so **** difficult my god a closer world like Apple one is impossible to imagine.
However Shootist007 thanks for your message, but given what I said I do not think is a cable problem.

How to find out list of procedures and functions inside a package

How I can find out the list of Procedures and Functions inside a Package.

Look at ALL_PROCEDURES and ALL_ARGUMENTS.

How do I import a playlist on home sharing? I get the songs, but not packaged in the playlist from which it was imported.

How do I import a playlist on home sharing? I get the songs, but not packaged in the playlist from which they were imported. Now I have duplicate songs in my music library.

You can't import media from one Home Sharing library to another by any other means except selecting the individual items you want to import. For example, you can't select a playlist and then click on the 'Import' button to import all the items in that playlist. You have to select all the items in the playlist before you can click on the 'Import' button. By extension, the playlist on the other Home Sharing computer will not be re-created on your computer. You can select more than one item using the 'Shift' or 'Command' keys.
What you can do is create a playlist on your computer first, with the same name if you want, and then use drag and drop to copy the media from the remote playlist to your playlist. Note that the playlist on your computer cannot be a 'Smart' playlist it must be a regular playlist for drag and drop copying to work.
Regarding 'Smart' playlists. If you create a 'Smart' playlist on your computer that uses the exact same filtres as the ones on the remote library when you import the media from the remote library they will show up in the same 'Smart' playlist on your computer.

HT1414 I am trying to restore my Ipod touch 5 generation but I am receiving an error message that says your Ipod can not be restored you need your password I don't know my password so I don't know what to do. I have started the procedures 3 times but no

am trying to restore my Ipod touch 5 generation but I am receiving an error message that says your Ipod can not be restored you need your password I don't know my password so I don't know what to do. I have started the procedures 3 times but no luck till now

If it is asking for the screen-lock passcode then:
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
Otherwise follow varjak paw recommendation

I just bought an ipad 2, but the packaging doesnt say ipad 2. have they given me the first generation?

I just bought an iPad 2, but the packaging doesn't say iPad 2. have they given me the first generation?

I don't think that the box has the gen number on it. My first gen iPad box has a picture of the screen covering the front of the box, whereas the 2nd gen box just has an angled view across the iPad in the middle of the box cover (there is a picture of the box here) - it doesn't say 'iPad 2' on it, just 'iPad'
If you open the box then you can definitely tell by whether it has cameras on the front and back - there are pictures of the front and back of the iPad 2 on this page : http://www.apple.com/ipad/specs/

Adobe Creative Cloud Packager for macintosh fails

Adobe Creative Cloud Packager for macintosh fails.
The error log says "[ERROR] AdobePackageBuilder - AdobePackageBuilder : SendPacket returned error : -1".
I tried 4-5 times.
Everything is downloaded (took about 14 Gb).
I now have only 12Gb free space on my disk. Can that be the reason (will the packager need to make a copy of the downloaded stuff?).
When I am done, how do I reclaim the space eaten by the packager?
Seems like it is caching it at ~/Library/Application Support/Adobe/CCP, but will I manually have to delete that cache?
I cannot find a menu entrance for doing so.
Would be nice if the packager could use a mounted network disk as destination, but it seems not to discover these.
/Peter Andersen

Wanted to join in and say this has been happening to me too. I wiped every adobe file I could find, and used the cleaner too. Started over from scratch in a brand new user account.
It's been about 7 days and I cannot get CCP to actually build a package. I've gotten a variety of messages but everything single time something fails. The new thing is that it says it fails on individual applications. So I disable them, and the error jumps to a new app. I can see that the .dmg's are fine and intact in ~/Library/Application Support/Adobe/CCP/
Given the amount of time this has cost me I really wish I had purchased CS6 Master Collection for every workstation. From my perspective, Creative Cloud has been nothing more then a giant waste of time and effort. It's genuinely bad product from an IT management perspective. Why push off the job of building and installer onto the customer? I should just be able to download the full Master Collection dmg, and then turn on and off the apps I want. Instead I am stuck with a workstation down, and everyone using CC trials to work.

FaceTime not working on my Macbook Pro. I am able to sign in successfully and add contacts. When I try to call a contact with an iPhone, its connecting then fails. When someone try to FaceTime me,I try to access but it says connecting then fail

FaceTime not working on my Macbook Pro. I am able to sign in successfully and add contacts. When I try to call a contact with an iPhone, it says connecting then fails by ending automatically. When someone try to FaceTime me,I accept but it says connecting then fail. I only have a MacBook Pro to FaceTime and not an iPhone. I was informed that I should be able to FaceTime from my laptop via video call without an iPhone.
Please advise.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
1. The purpose of this test is to determine whether the problem is localized to your user account. Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault in OS X 10.7 or later, then you can’t enable the Guest account. The "Guest User" login created by "Find My Mac" is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
2. Connect to a different network, such as a public Wi-Fi hotspot, and try again.

OSD TS Fails during package download - SendWinHttpRequest failed. 80072ee2.

Hi there,
I have a SCCM 2012 R2 environment running on Windows Server 2012 on VMWare Workstation 10.0.1. My TS is deploying Win7x64 to another VM. I am using MDT integration and the first action after "Setup Winodws and ConfigMgr", and restarting from WinPE
to Win7, is "Use Microsoft Deployment Toolkit Package". It always downloads part of the package before it fails on a seemingly random file.
From the F8 prompt i am able to ping the MP/DP. From the MP/DP I am also able to download the file in question using Internet Explorer. From my viewpoint this looks like a transient network error, but I am open to any suggestions at this point. I have also
seen the TS run through without a hitch once, so it seems like it's not perfectly consistent.
Does anyone have any idea as to what could cause this? Where should I be looking? Any troubleshooting tips?
External link to smsts.log
Snippet of my TS
Snippet from the smsts.log:
Downloading file /SMS_DP_SMSPKG$/CEN00024/sccm?/Scripts/DeployWiz_Computer.png range 0-6593 InstallSoftware 2014-02-04 12:43:24 2356 (0x0934)
Downloaded file from http://CM01.spectre.local:80/SMS_DP_SMSPKG$/CEN00024/sccm?/Scripts/DeployWiz_Computer.png to C:\_SMSTaskSequence\Packages\CEN00024\Scripts/DeployWiz_Computer.png InstallSoftware 2014-02-04 12:43:24 2356 (0x0934)
Downloading file /SMS_DP_SMSPKG$/CEN00024/sccm?/Scripts/DeployWiz_ComputerBackup.vbs range 0-2690 InstallSoftware 2014-02-04 12:43:24 2356 (0x0934)
Downloaded file from http://CM01.spectre.local:80/SMS_DP_SMSPKG$/CEN00024/sccm?/Scripts/DeployWiz_ComputerBackup.vbs to C:\_SMSTaskSequence\Packages\CEN00024\Scripts/DeployWiz_ComputerBackup.vbs InstallSoftware 2014-02-04 12:43:24 2356 (0x0934)
Downloading file /SMS_DP_SMSPKG$/CEN00024/sccm?/Scripts/DeployWiz_ComputerBackup.xml range 0-2999 InstallSoftware 2014-02-04 12:43:24 2356 (0x0934)
Downloaded file from http://CM01.spectre.local:80/SMS_DP_SMSPKG$/CEN00024/sccm?/Scripts/DeployWiz_ComputerBackup.xml to C:\_SMSTaskSequence\Packages\CEN00024\Scripts/DeployWiz_ComputerBackup.xml InstallSoftware 2014-02-04 12:43:24 2356 (0x0934)
WinHttpSendRequest (hRequest, pszAdditionalHeader != NULL ? pszAdditionalHeader : WINHTTP_NO_ADDITIONAL_HEADERS, (DWORD)-1, NULL, 0, 0, NULL), HRESULT=80072ee2 (e:\qfe\nts\sms\framework\tscore\downloadcontent.cpp,1211) InstallSoftware 2014-02-04 12:43:45 2356 (0x0934)
WinHttpSendRequest failed. InstallSoftware 2014-02-04 12:43:45 2356 (0x0934)
SendWinHttpRequest failed. 80072ee2. InstallSoftware 2014-02-04 12:43:45 2356 (0x0934)
SendWinHttpRequest (hSession, hConnect, hRequest, pszSourcePath, sWinHttpRangeHeader.c_str(), bUseSSL, ullContentLength, LastGoodCredentialsType), HRESULT=80072ee2 (e:\qfe\nts\sms\framework\tscore\downloadcontent.cpp,1424) InstallSoftware 2014-02-04 12:43:45 2356 (0x0934)
DownloadFileWithRanges() failed. 80072ee2. InstallSoftware 2014-02-04 12:43:45 2356 (0x0934)
DownloadFileWithRanges (hSession, hConnect, sRequest, hFile, pszDestination, ullFileSize, ulPackageSize, ulDownLoaded, LastGoodCredentialsType, bUseSSL), HRESULT=80072ee2 (e:\qfe\nts\sms\framework\tscore\downloadcontent.cpp,1514) InstallSoftware 2014-02-04 12:43:45 2356 (0x0934)
DownloadFile() failed for http://CM01.spectre.local:80/SMS_DP_SMSPKG$/CEN00024/sccm?/Scripts/DeployWiz_ComputerName.vbs, C:\_SMSTaskSequence\Packages\CEN00024\Scripts/DeployWiz_ComputerName.vbs. 80072ee2. InstallSoftware 2014-02-04 12:43:45 2356 (0x0934)
DownloadFile (hSession, hConnect, sSourceFile.c_str(), sDestinationFile.c_str(), ulPackageSize, ulDownLoaded, LastGoodCredentialsType, bUseSSL), HRESULT=80072ee2 (e:\qfe\nts\sms\framework\tscore\downloadcontent.cpp,1590) InstallSoftware 2014-02-04 12:43:45 2356 (0x0934)
Error downloading file from http://CM01.spectre.local:80/SMS_DP_SMSPKG$/CEN00024/sccm?/Scripts/DeployWiz_ComputerName.vbs to C:\_SMSTaskSequence\Packages\CEN00024\Scripts/DeployWiz_ComputerName.vbs InstallSoftware 2014-02-04 12:43:45 2356 (0x0934)
DownloadFiles() failed. 80072ee2. InstallSoftware 2014-02-04 12:43:45 2356 (0x0934)
DownloadFiles (setDirs, setFiles, sDestination.c_str(), bUseSSL), HRESULT=80072ee2 (e:\qfe\nts\sms\framework\tscore\resolvesource.cpp,2529) InstallSoftware 2014-02-04 12:43:45 2356 (0x0934)
Download() failed. 80072ee2. InstallSoftware 2014-02-04 12:43:45 2356 (0x0934)
DownloadContentAndVerifyHash() failed. 80070002. InstallSoftware 2014-02-04 12:43:45 2356 (0x0934)
DownloadContentAndVerifyHash ( pszPackageID, L"SMSPackage", saHttpContentSources, saSMBContentSources, saMulticastContentSources, sDestination, dwFlags, L"", 0, dwPackageFlags, mapNetworkAccess ), HRESULT=80070002 (e:\qfe\nts\sms\framework\tscore\resolvesource.cpp,3052) InstallSoftware 2014-02-04 12:43:45 2356 (0x0934)
DownloadContentLocally (pszSource, sSourceDirectory, dwFlags, hUserToken, mapNetworkAccess), HRESULT=80070002 (e:\qfe\nts\sms\framework\tscore\resolvesource.cpp,3273) InstallSoftware 2014-02-04 12:43:45 2356 (0x0934)
TS::Utility::ResolveSource (pszPkgID, sPath, 0, hUserToken, mapNetworkAccess), HRESULT=80070002 (e:\nts_sccm_release\sms\client\osdeployment\installsoftware\runcommandline.cpp,399) InstallSoftware 2014-02-04 12:43:45 2356 (0x0934)
Failed to resolve the source for SMS PKGID=CEN00024, hr=0x80070002 InstallSoftware 2014-02-04 12:43:45 2356 (0x0934)
cmd.Execute(pszPkgID, sProgramName, dwCmdLineExitCode), HRESULT=80070002 (e:\nts_sccm_release\sms\client\osdeployment\installsoftware\main.cpp,372) InstallSoftware 2014-02-04 12:43:45 2356 (0x0934)
Install Software failed to run command line, hr=0x80070002 InstallSoftware 2014-02-04 12:43:45 2356 (0x0934)
Process completed with exit code 2147942402 TSManager 2014-02-04 12:43:45 1672 (0x0688)
!--------------------------------------------------------------------------------------------! TSManager 2014-02-04 12:43:45 1672 (0x0688)
Failed to run the action: Use Toolkit Package.
The system cannot find the file specified. (Error: 80070002; Source: Windows) TSManager 2014-02-04 12:43:45 1672 (0x0688)
MP server http://CM01.spectre.local. Ports 80,443. CRL=false. TSManager 2014-02-04 12:43:45 1672 (0x0688)
Setting authenticator TSManager 2014-02-04 12:43:45 1672 (0x0688)

We're also experiencing the same problem in two of our environments. Seemingly random file every time, but always in the Toolkit-package. We're using SCCM 2012R2 with the KB2905002 and KB2907591 hotfixes, and MDT2013.
What we've tried so far:
- Recreated the toolkit package
- Recreated the entire task sequence and all accompanying packages (even bootimages and client)
Last night I also reinstalled the entire server, scrapped the old database, recreated everything from scratch.
Still fails.
What I've seen, is that when it fails, the log halts for 21 seconds.
<![LOG[Downloaded file from http://NSH-C1-SCCM-02.<domain>.LOCAL:80/SMS_DP_SMSPKG$/NSH00012/sccm?/Scripts/DeployWiz_Applications.xml to C:\_SMSTaskSequence\Packages\NSH00012\Scripts/DeployWiz_Applications.xml ]LOG]!><time="23:40:16.233+480" date="02-05-2014" component="InstallSoftware" context="" type="1" thread="2128" file="downloadcontent.cpp:1574">
<![LOG[WinHttpSendRequest (hRequest, pszAdditionalHeader != NULL ? pszAdditionalHeader : WINHTTP_NO_ADDITIONAL_HEADERS, (DWORD)-1, NULL, 0, 0, NULL), HRESULT=80072ee2 (e:\nts_sccm_release\sms\framework\tscore\downloadcontent.cpp,1193)]LOG]!><time="23:40:37.457+480" date="02-05-2014" component="InstallSoftware" context="" type="0" thread="2128" file="downloadcontent.cpp:1193">
<![LOG[WinHttpSendRequest failed.]LOG]!><time="23:40:37.457+480" date="02-05-2014" component="InstallSoftware" context="" type="3" thread="2128" file="downloadcontent.cpp:1193">
- It always fail on the toolkit-package
- The tookit-package is downloaded afterwards, completely ok, in the "Gather Logs and StateStore on Failure".
- It is no difference if I deploy to physical or virtual hardware.
Just to make it even more exciting.. We're experiencing the same on both 2012R2 and 2008R2 servers (two different installations)

Parent package are getting failed

hi
i have parent package , which is calling child package using execute package task.
i have error handling in on of the data flow task in child package, so if error comes , the parent package still continue run for another files.
now the issue is , even if child package successful (with handling error inside), the parent package is logging failed,
ideally, it should be success, as we already handling error ,when task gets failed in child package.
i tried to set propagate , on error to false, still getting error on parent package.
how to solve it

If a child package is failing, but handled then the parent will still fail.
Here is a workaround for that. You need to add an event handler on the Execute Package Task with Propagate set to False.
Please mark the post as answered if it answers your question | My SSIS Blog:
http://microsoft-ssis.blogspot.com |
Twitter

Package refuses to fail

I'm doing some maintenece on a package somebody else wrote. Somehow, this person has rigged the package to never fail. In a data flow task, I can see an OLE DB Source fail. It lights up red but the package keeps on trucking. As near as I can tell, I've
thrown every switch I can to prevent this from happening. Everything that looks like "fail package on failure" is set to true. Where else do I need to look to make sure the package actually dies when a componet fails?

Heh. Knowing how to reproduce it would fix the problem. Not sure what's making that happen in the first place.
You see how it's a loop in a loop?In the inner loop there is a task called Import Claim. In that task is an OLE DB Source. On Import Claim, there is an onerror event handler that just sets a flag indicating that there was a failure. That flag being set to
true no longer has any real impact on the package. It's an artifact that I don't want to remove because I can't be sure what else depends on it. The way I have it set is if Import Claim fails it should go down the right path. Instead, the OLE
DB Source turns red then the OLE DB destination turns red but instead of erroring Import Claim, the package will continue to execute down the success path.

TS3694 I tried updating my iPod, and ever since it has not worked at all. If I hold in the lock & home button, it will tell me to plug it into iTunes. Once I do that, it says it will restore but every time, restoring it fails. My iPod is not working at al

I tried updating my iPod, and ever since it has not worked at all. If I hold in the lock & home button, it will tell me to plug it into iTunes. Once I do that, it says it will restore but every time, restoring it fails. My iPod is not working at all, and I really have no idea what to do. It is just a black screen, and occasionally the white apple will appear as if it were turning on, but it won't turn on. I just need some suggestions on what to do!

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

My Macbook aliminium unibody from late 2008 will not boot. I reach the grey screen with the apple icon and the spinning grey gear. I used disk utility to boot it but it said integrity test failed. I don't know what to do can anyone please help?

My Macbook aliminium unibody from late 2008 will not boot. I reach the grey screen with the apple icon and the spinning grey gear. I used disk utility to boot it but it said integrity test failed. I don't know what to do can anyone please help?

Sounds like you may have a harddrive issue. You are probably going to need to get that changed out and then install the OS X again to get it going.

I am trying to install Adobe Reader my wife's laptop but "installer" hangs up and fails with a blank black screen. The machine is capable and has a Vista OS. My wife blames the machine and wants to "throw it out." She's an idiot but I need to get this fix

I am trying to install Adobe Reader my wife's laptop but "installer" hangs up and fails with a blank black screen. The machine is capable and has a Vista OS. My wife blames the machine and wants to "throw it out." She's an idiot but I need to get this fixed.

run the cleaner (Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs) and then retry installing.

Yosemite will not upload on my MacPro, says I have to verify or repair, but when I do - it fails on that too. Am now stuck with a computer that doesn't work ! Have I lost everything ?

Yosemite will not upload on my MacPro, says I have to verify or repair, but when I do - it fails on that too. Am now stuck with a computer that doesn't work ! Have I lost everything ?

Hello BassoonPlayer,
Since you are using one of the the school's Macbooks, it is quite possible that the time and date are not properly set on the computer that you are using. FaceTime will not work if you do not have the proper time zone set up for the location that you are in. This past week, there were a two other Macbook users I've helped by simply telling them to set the Date/Time properly. By the way, you described your problem very well, which makes it easier for us to help you. Hope this solves your problem -- if not, post back and I can suggest other remedies.
Wuz

Procedure is exeuted but in package it is failed

Similar Messages

Maybe you are looking for