Procedure of System copy in Solman 4.0 through sapinst based on ABAP+JAVA
Hello Everyone,
Iam on solman 4.0 based on netweaver 2004s based on ABAP+JAVA instance and database oracle 10g and on windows 2003 platform.I want to perform system copy for solman 4.0 through sapinst and if someone can provide step wise step procedure with 10-20 lines for system copy with sapinst ,it shall be gr8 help.
I hv gone through the system copy guide on OSS also but its too long and confusing also ,a 12-20 steps procedure shall be useful and helpful . Also Iam performing system copy where source system and taget system are same ie; the current sytem where application is installed , i wanna copy tat only and perform system copy on tat server only.plz revert to tat also.
Requested to revert at earliest as this is very urgent. Points guaranteed.My Email id is [email protected]
Thanks and Reagrds,
Somya
I don´t think, that the system copy guide is confusing, it has basically a step-by-step procedure, depending on the "way" use use (a backup or R3load).
There are several ways of doing a system copy and depending on the one you want to use, the procedure is slightly different.
Markus
Similar Messages
-
Hi Gurus,
I just need clarification on this. I plan to build a new system using system copy menthod. Would I require a Key from Solution Manager for this new installation?
Appreciate your feedback.
Thanks,
SSHi
You'll need to install new license key after the system copy.
You must first delete all old licenses in tcode SAPLICENSE, then, request a new license at http://service.sap.com/licensekey
to do this you will also need a a new hardware key which helps in creating a new license key...
make sure you delete the system in the service market place and create a new system with the hardware key you get and then request the license.
Cheers,
Chaith -
System Copy:Failure when starting export with SAPINST
We are busy with a Unicode conversion and needs to start the export with sapinst. All pre unicode conversion steps are done, we upgraded from 4.6C to ECC6.0. It is a distrubuted system running on MSSQL. Started the export on the DB server and got the follwing error below.
Regards
Roger
INFO 2007-02-08 20:09:27
Execute step stepPreconditions of component |NW_Export|ind|ind|ind|ind|0|0|NW_ABAP_Export_Dialog|ind|ind|ind|ind|4|0|NW_ABAP_Export|ind|ind|ind|ind|0|0.
INFO[E] 2007-02-08 20:09:27
FSL-02077 File system export (share) saploc does not exist.
INFO[E] 2007-02-08 20:09:27
FSL-02077 File system export (share) sapmnt does not exist.
ERROR 2007-02-08 20:09:27
CJS-00030 Assertion failed: in NW_ABAP_Export.stepPreconditions: Executable directory 'G:\usr\sap\HD3\SYS\exe\nuc\NTI386' must exist
ERROR 2007-02-08 20:09:27
MUT-03025 Caught ESAPinstException in Modulecall: ESAPinstException: error text undefined.
ERROR 2007-02-08 20:09:27
FCO-00011 The step stepPreconditions with step key |NW_Export|ind|ind|ind|ind|0|0|NW_ABAP_Export_Dialog|ind|ind|ind|ind|4|0|NW_ABAP_Export|ind|ind|ind|ind|0|0|stepPreconditions was executed with status ERROR .
INFO 2007-02-08 20:09:36
An error occured and the user decide to stop.\n Current step "|NW_Export|ind|ind|ind|ind|0|0|NW_ABAP_Export_Dialog|ind|ind|ind|ind|4|0|NW_ABAP_Export|ind|ind|ind|ind|0|0|stepPreconditions".Hi All
These are the steps I had to perform when I faced the issue -
Background:
Faced the issue when I was exporting the DB instance (SQL 2000) using SAPINST.
Steps:
1. We are running NW04S Portal System.Copied the E:\usr\sap\DEV.... files from CI to DB server.
2. Defined sapmnt/saploc shares for E:\usr\sap folder on DB server.
3. Created the folder E:\usr\sap\DEV\SYS\exe\uc\NTI386\mssjdbc and copied the files base.jar,util.jar,sqlserver.jar,spy.jar files from E:\usr\sap\DEV\JC00\j2ee\jdbc folder.
4. Retry the SAPINST. Final confirmation screen appeared.
5. Checked all the parameters for correctness and clicked on start...export started and finished completely.
All these steps I have done just looking at the log file.One thing I am not still clear is why SAPINST is looking for \usr\sap/...files/folder in DB instance instead of App server.
Would appriciate if any one can clarify this.
Thanks
Naresh P. -
Question concerning homogenous system copy abap+java
Hi,
I have the following question: we are running a SAP ERP2005 und Linux/Oracle.
We need a restore of the productive system form an early date, due to problem analysis. Because this system copy was not planed we didn't do the java SDM dump (as described in the manual). We do have a backup of database and the library files. Is it possible to use this files for the system copy and do some postactivities to get a consistent abap+java system?
Regards
Ulrike TubbesingHi,
You need to have the SDM folder backup and if to be more specific you need abckup of the sdmrepository.sdc file so the J2EE engine can function properly.
Regards. -
System Copy -Solman 7.1 Adjust name table phase error
Dear Experts,
I am on way of performing the system copy for solman 7.1 from prod to dev system.We are encountering the error in the adjust name table phase .Below is the log :
ERROR in initialization (can't get R/3-version)
ERROR in initialization (can't get R/3-version)
D:\usr\sap\\D00\log\SLOG00.LOG: No such file or directory
rslgwr1(20): rstrbopen cannot open pre-existing SysLog file.
D:\usr\sap\\D00\log\SLOG00.LOG: No such file or directory
rslgwr1(11): rstrbopen cannot open SysLog file.
SysLog:iE1020140515082322000000000000 this TTY
: 0000
:SCSA 4096
SysLog:hBZA20140515082322000000000000 this TTY
: 0000
:SVERS dblink 1323
OS:Windows 2008
Database :Sybase Ase 15.7 ,and the weird thing is my SID is different .
Appreciate your responses
Thanks
AsimHi Asim,
1.I was getting error at Abap phase load error .So i have merge the tsk & bak files by r3laod and manually set ign in tsk files .Should i change the ign status back to error.Is this could be the problem causing in adjusting table name phase.
Status "ign" will ignore the object from being imported into the database. This may lead to inconsistency and loss of data.
2.We have used abap export using Sap inst only .Will that not effect if using import by SWPM
Actually SWPM also contains sapinst tool. But As I never never used this approach , I would suggest you to give a try and check.
Else you may need to perform fresh export and then import using SWPM.
Hope this helps.
Regards,
Deepak Kori -
Homogeneus system copy procedure
Hi Gurus,
I have the following scenario:
ERP Netweaver 7.0 SR2(SAP_BASIS 709) Java + ABAP stack with Oracle 11.2.0.2 recently upgraded. I have to make a copy to the test system QAS.
The question is if i can use new sapinst versions, (obtaining the newers installation master and Java CDs like SR3 or EHP 2) and its procedures to make the copy.
Thanks in advance.Alejandro Gallo wrote:
Hi Gurus,
>
> I have the following scenario:
> ERP Netweaver 7.0 SR2(SAP_BASIS 709) Java + ABAP stack with Oracle 11.2.0.2 recently upgraded. I have to make a copy to the test system QAS.
> The question is if i can use new sapinst versions, (obtaining the newers installation master and Java CDs like SR3 or EHP 2) and its procedures to make the copy.
>
> Thanks in advance.
Your question is quite confusing. You are saying ERP Netweaver 7.0 but basis version is 709. There is no 709 version.
If your release is ERP 6.0/Netweaver 7.0 then you have to use installation master DVD of this version only. You cannot use EHP2 version DVD. And procedure of system copy is more or less same for 7.0 release or 7.02 release. You can check system copy guide on http://service.sap.com/instguides.
Thanks
Sunny -
Homgeneouos system copy - Import/Export
Hello everybody,
I have successfully upgrade system( ECC 5.0) m from windows 2003 (32)+ SQL 2000 to windows 2003 (64-bit) + SQL 2005. using attach /detach method, in post processing execute STM tool, update stats etc.
But we found performance is not much of improve previous system with only 4 GB RAM, new one with 32 GB RAM.
I have remove the parameter PHYS_MEMSIZE parameter from the profile so it is under ZERO MEMORY MGT.
This above said in testing environment till.
For testing, I planning for the same using export/import
Plan :
Source system
1. Now, Export the database by executing sapinst.exe and then
select ABAP system-->MS SQL server -->Unicode -->ABAP Database content export
and continue with the Export procedure.
On the Target system
1. Create a directory EXPORT and copied all the exported data.
2. Start the SAP installation(only start database instance installation), enter the required parameters up to the
window selecting the database instance installation method, on this
I will choose System copy/migration(R3load based)
3. provide the path of the Export directory.
4. Specify the order in which the package are loaded - I select alphabetical order
5. No other option will select on this screen.
So for testing, I simply database export from source system and on target system I execute only Database instance installation, all process successfully done.
We have not any BW client so I am generate the DDL statement
Pleas suggest above plan is correct or anything missing?
will improve performance of system?
Thanks
GaneshHI!
As per suggested for DDL statement generation, we have no any productive BW client,
i tried on our Qaulity system by logging on regular using client, message display DDL statement
generated successfully,. but when I check in usr\sap\tmp folder there no file
1. Unicode migration option selection is necessary?
in installation directory path is only /tmp so I checked in ( usr\sap\tmp) directory.
2.
Above procedure is correct, but during target system installation please continue with SAPinst to install SAP instance as well.
As above statement, I started installation on Target system by SAPinst then from option
mySAP EPR 2004 SR1
System copy
Target system
ABAP system
MS SQL Server
Unicode
Central instance installation
Database instance installation
MSCS Node A Configuration
MSCS Node B Configuration
Dialog instance installation
internet graphic server upgrad
I select Database instance installation Database instance installation option. No any other process I have done.
3. is same procedure for system copy in clustering environment ( because our Production system in windows 2003 (64 -bit) clustering environment.
4. After installation complet, in post processing need to use STM tool, update static etc.
Please suggest.
Thanks
Ganesh -
System Copy from ABAP Stack to ABAP+Java Stack
Hi,
Is it possible to system copy (homogeneous or heterogeneous) from a system based on ABAP Stack to a system based on ABAP+Java Stack? Is it the normal system copy procedure or something aditional is required to do. Pl. advise. Thanks
regards
Edited by: Abdus Samad on Oct 24, 2008 8:13 AMIt depends on what you want to copy, a system copy will always wipe out the existing target. But if you want to only copy data, you might be able to do a client copy. You can start with this SAP note: [552711 - FAQ: Client copy|https://service.sap.com/sap/bc/bsp/spn/sapnotes/index2.htm?numm=552711]
Regards Michael -
ABAP+JAVA system copy using 3rd party export/import tools
Hi all,
I am trying to do a homogenous system copy. I am following the syscopy guide for SAP NW 7.0 SR3 ABAP+JAVA systems
We are running AIX 5.L and Oracle.
My question is this. We are using an IBM XiV system for our disk storage, and we are able to restore from "snaps" which is their version of images. Does anyone know if it is possible to restore or "import" the data in a system copy using an outside tool like this? If so, do you have any information on how to?
I know it is possible to restore the database from an offline backup using BRTools rather than r3load and jload, and I just wanted to see if I can restore from a snap as it would save a lot of time in the procedure.
Any help or ideas would be much appreciated.
Thanks!>My question is this. We are using an IBM XiV system for our disk storage, and we are able to restore from "snaps" which is their version of images. Does anyone know if it is possible to restore or "import" the data in a system copy using an outside tool like this? If so, do you have any information on how to?
That approach is not supported.
The reason is: combined instances write the instance name and hostname in various places, on the filesystem in .properties files, in the JDBC configuration, depending on the java applications you run on top in various other places. What you're trying to do is effectively "renaming" an instance.
Technically it's possible to do it and to get it run, yes, but the supported way is running sapinst and choose ABAP + Java system copy. This will prevent you from lots of (not really documented) manual work after the copy.
Markus -
Hi All,
I am system copy from PRD to QA , I have ECC 5.0 on HP Unix. please provide me the step by step procedure for system copy.
Regards
Atul-Hi Atul,
If your production system and your QA system have the same OS and DB, look for the guide for Homogeneous System Copy, if they are different look for the Heterogeneos System Copy guide at SAP Marketplace... Also find more information at http://service.sap.com/systemcopy
Regards
Juan -
HELLO Techies,
Please, send the MSSQL 2005 SYSTEM COPY PROCEDURE with SCREENSHOTS asoon as possible
if possible within a hour.. please....
Thanks &Regards,
PavanHi Pavan,
Please gothru SAP System Copy Document.
you should follow the official system copy guide
https://service.sap.com/instguidesNW70 (based on your version)
Here is the link which has procedure for SAP MS-SQL System Copy Procedure and System Copy differs from Environment . Try to get the procedure instead of screenshots.
http://joeysbasisblog.blogspot.com/2010/10/sap-system-copy-procedure.html
Also go thru below notes
Note 151603 - Copying an SQL Server database
Note 1476928 - System copy of SAP systems on Windows 2008 (R2): SQL Server
Regards,
Arjun -
Abap+Java System Copy on NW2004
Hello Gurus:
I will be performing a system copy of NW2004 (not NW2004s) which is running on ABAPJava stack. How should I perform the system copy? I have gone thru the documents for ABAP system copy and Java System copy. What are steps that I need to follow to do the ABAPJava stack?
Huge thanks in advance.
Regards,
N.S
Message was edited by:
Narayanan SwamyHi Swamy,
Please refer these notes to clarify further.
Hom./Het.System Copy SAP Web AS 6.40 SR1 Java Note 785848 .
restrictions which apply to the system copy see SAP Note 711093.
Cheers,
Shaym -
Got stuck at import abap phase during system installation from system copy
hi,
we have ECC6 ehp4 sp5 level system (linux + db2), due to some reasons our quality system was crashed, we took homogeneous system copy of Production server through sapinst and now we are restoring in Quality server through sapinst. during import ABAP phase its taking long time to pass and system message its showing is
waiting 6134 minites for DDL template file DDLDB6.tpl in dump directories.
i stopped installation and once again started restoration through system copy. Now the system go stuck at the same phaseHi,
AFAIK, report SMIGR_CREATE_DDL should be run in se38 before starting the export. This generates the required DDL statements which are needed for system copy.
For more info, refer system copy guide in http://service.sap.com/instguides. Hope this helps.
Rgds,
Soujanya -
System copy guide for Solution Manager 7.0 SPS15
Hello,
a new hardware is needed for our SAP Solution Manager 7.0 SPS 15. I will install a new SAP Solution Manager and do a system copy from the old hardware to the new one. There is no migration neccessary, because OS and DB will be the same.
Now I'm searching for some informations and guides to do a system copy of a SAP Solution Manager. All I found was a system copy guide of Netweaver 04s SR3/SR2 with informations about Java Usage Types but not for Diagnostics.
Are there any guides or howtos to do a system copy with SAP Solution Manager ABAP+JAVA? Does anyone have experiences and advices?
Kind regards,
Sascha Piotrowsky> Looking forwards to this event I'm afraid of forgetting some dependencies or configurations which have to be changed also, like SMD-Agents configuration,s trusted connections, wiley introscope, e2e and so on.
Wily is not part of the copy - you will need to copy this "manually". The connections et al must be re-done...
Markus -
Hi Gurus,
I am doing the system copy of ABAP + Java running on Windows 2008 with SQL server 2008.
During import at target system I am getting the below error at Post Load activities.
*sapinst.log*
E:\usr\sap\BPD\SYS\exe\uc\NTAMD64\dipgntab.exe -rwr40 -srctt DDNTT -srctf DDNTF -dsttt DDNTT -dsttf DDNTF -ttonly TT is written to the logfile dipgntab.log
dipgntab.log
Here's the short version of the dipgntab.log:
ERROR in initialization (can't get R/3-version)
ERROR in initialization (can't get R/3-version)
E:\usr\sap
D00\log\SLOG00.LOG: No such file or directory
rslgwr1(20): rstrbopen cannot open pre-existing SysLog file.
E:\usr\sap
D00\log\SLOG00.LOG: No such file or directory
rslgwr1(11): rstrbopen cannot open SysLog file.
I have tried the below steps.
1) The environment variable MSSQL_FORCEOLEDB = 1 has to be set for the userID performing the installation
2) Kernel upgrade.
Any help would be highly appreciable.
Thanks,
AkramAli Akram wrote:>
> ERROR in initialization (can't get R/3-version)
> ERROR in initialization (can't get R/3-version)
> E:\usr\sap
D00\log\SLOG00.LOG: No such file or directory
> rslgwr1(20): rstrbopen cannot open pre-existing SysLog file.
> E:\usr\sap
D00\log\SLOG00.LOG: No such file or directory
> rslgwr1(11): rstrbopen cannot open SysLog file.
Dear Akram
Can you check what files are exported from the source system while performing system copy.
Also, if you run sapinst on target system it asks you system copy using standard method or attach/detach method.
Which is selected?
Regards
Khalid
Maybe you are looking for
-
I am using Visual studio 2008 and crystal report 2008 in a web application. I have problem in logging to the database from crystal report by applying the connection info for the runtime (Connect to ODBC DSN). I got this error: System.Runtime.InteropS
-
3002 Code: iPhone isn't recognized by iTunes.
My installation crashed while installing iOs5 and I received a 3002 message. Now my iPhone will only restart itself (show apple icon and skinny thing) and the device is not recognized by iTunes. Suggestions?
-
I am wondering if anyone out there has any suggestions for the simplest/cheapest way to make an older imac (without internal wireless card) wireless. What I am looking for is some kind of an access point that plugs into the imac via USB, firewire or
-
Restricting email to local only in and out for student users... ?
So I don't know if my Googling skills are dissipating or what, but I can't seem to find anyone out there that's trying to accomplish the same thing I am... The school I manage IT stuff for currently shares an ancient PowerMac G4 based FirstClass emai
-
Spell check in Mavericks mail does not work properly
If I spell check on sending (seems a sensible idea) and want to make tweaks in the actual e-mail as well, the email will send mid spell check and tweaks - without full spell check and often half written corrections This is an ongoing problem in other