Procedure to change the standard value key of a work center

Hi Gurus,
What is the procedure to change the standard value key of a work center.
Thanks in advance,
Regards,
PPQMUSER

Hi,
Just go to CR02 and change std value key, system will give you an information massage 'Standard value key : parameter XXXX after changed' as per the parameters used in new std value key.
If you want to change the customization for allready used STD value key, then you need dealocate that key from workcenter, and then change the customization.
Tara
Edited by: tara bhapkar on Feb 29, 2012 7:39 AM

Similar Messages

How to batch change the standard value of routing

Dear all,
         I meet a problem, and need you help.
        As you know, we can use T-code "CS20" to batch change a component's quantity in different Bom by a factor.
       for example: Component a in Fert. A, quantity change from 6g x 0.9 = 5.4g
                           Component a in Fert. B, quantity change from 8g x 0.9 = 7.2g
       now, my question is how to Batch change the standard value in routing. (select by work center) CA85N can select the value, but seems can not batch change by a factor,
       thanks in advance

It is not a big task for u prasobh...Just play in CEWB for 5-10 mins you will understand everything....
If you face any issue let me know..
For ur information I am also an IBM employee...
Gobi

Changes to the Standard Text Key in a PM order

Hi all,
Is there a better way to track changes to the Standard Text Key in a PM order? When I change the Standard Text Key in the Operations tab (t-code IW32) and I access the change log (menu: Extras > Other documents > Changes) I only see that the language key has been changed. I dont see the actual Standard Text Key value. Any ideas?
Thanks in advance for your help.
Adriana

Hi
To use standard texts, perform the following six steps:
Select the maintenance order and access the operation overview screen using Goto -->Operation overview.
You can enter standard text keys in this screen or in a detail screen for the relevant operation.
Enter a standard text key in the appropriate field and press ENTER .
If the text is longer that the short text line available, the field Text is selected for that operation.
Check the long text and edit it if necessary. To do this, select the operation and choose Operation--> Long text.
The system branches to the text editor screen. If you also entered a short text for the operation and specified that this should not be overwritten by the standard text, you will see the short text displayed in the first line of the editor. The following lines contain the standard text.
Check the standard text and change it if necessary.
Save the final version of the text and return to the previous screen with Goto--> Back.
Save the maintenance order.
Standard texts are created for your system by your system administrator using the Customizing function.
Regards
Makarand Gurjar

How can I change the initial value of the field approve_or_reject?

Hello Workflow Gurus
We are using SRM 5.00(SRM SERVER 550) and as per the requirement, I have to make the Reject radio button as default checked on the Approver's screen.
We are using the SAP Standard Workflow WS14500015.
I found out the Standard task TS14508044 (SC approval per Item)which has one field in its container i.e. approve_or_reject ,based on the Initial value of this field , the radio button is behaving...
approve_or_reject EQ 0 i.e. Approve
approve_or_reject EQ 1 i.e. Reject
Now my requirement is to change the initial value of this field from 0 to 1 so that Reject radio button comes as checked by default into this standard SAP workflow task TS 14508044...
Kindly help me and let me know the procedure to change this.
PLEASE LET ME KNOW THAT IS IT WISE TO MAKE THE CHANGES INTO STANDARD SAP WORKFLOW ???
Thanks and regards
Ankur Goyal
09823448654

Well Iam not much sure about how you are trying to approve the shopping cart workitem b ut last week i faced a similar issue while apporving the workitems I was able to update the contianer element Apporve_or_reject element by using the FM BBP_PDH_WFL_WI_APPROVE and BBP_PDH_WFL_WI_REJECT ... These two fm will take the responsibility of updating the element with respective value as, if you approve the it will be populated with 0 and if you reject the the element will be updated with 1....
Please check the thread where I updated the thread in [SRM Workflows|Problem while approving SC from Blackberry !;
PLEASE LET ME KNOW THAT IS IT WISE TO MAKE THE
CHANGES INTO STANDARD SAP WORKFLOW ???
Modifying the standard workflow is not recommended.....

Unable to change the parameter value in the configtool

Hi All,
Error
In the Configtool I have changed the custom value to u2018TRUEu2019 of the key u201Cume.superadmin.activatedu201D under Cluster-data -> instance -> server -> services -> com.sap.security.caore.ume.service. Now I am trying to change the value again to u2018FALSEu2019 but the value is not getting updated even after the server is restarted OS level. Please advise.
System details:
SAP: PI 7.0
DB: MS SQL 2000
OS: Windows 2003 server
Thanks in advance.
Regards,
Dinesh

Hi Dinesh,
There are a variety of reasons why this is not getting reflected :
1) When you make changes if you use an AS ABAP or LDAP directory as the data source. The default values of the UME properties assume the database of the AS Java as the data source. This requires you to reconfigure the data source before you can restart the AS Java.
2) The cluster nodes have not been restarted after the changes
3) Changes apart from global configuration have also been made elsewhere.
4)properties as described in Editing UME Properties.
Editing UME Setting:
a) Start the Config Tool by executing
\j2
ee\configtool\configtool.bat.
b) In the tree, navigate to Global server
configuration services com.sap.security.core.ume.
service.
The list of UME properties appears.
Regards
joel
Edited by: joel trinidade on Apr 15, 2009 12:29 PM

How to change the characteristic value in a item of sales order by FM?

Hi experts,
I guess the FM BAPI_SALESORDER_CHANGE can implement my requirement. But I have made many testing program, that's all failed. I don't know which part is not correct. So could you give a very simple sample to me? Just change the characteristic value in a item of sales order, not do any change for other parts. Thanks in advanced.
Regrads

Hi Birendra,
Thanks for you explain. I follow your guide to wirte abap program. But related characteristic value still not changed in SO main screen. could you give me some suggestion? Thanks a lot!
type-pools: IBCO2,
            IBXX.
data: l_CUOBJ type CUOBJ_VA,
      l_ibase type IBCO2_IBASE_REC,
      l_CONFIGURATION type IBCO2_INSTANCE_TAB2,
      w_CONFIGURATION type IBCO2_INSTANCE_REC2,
      l_ROOT_OBJECT type IBXX_BUSINESS_OBJECT.
data: t_IBCO2_VALUE_TAB type IBCO2_VALUE_TAB,
      w_IBCO2_VALUE_REC type IBCO2_VALUE_REC.
select single CUOBJ
into l_CUOBJ
from VBAP
where VBELN = '0020030609'
    and POSNR = '000020'.
CALL FUNCTION 'CUCB_GET_CONFIGURATION'
    EXPORTING
      INSTANCE                           = l_CUOBJ
    IS_BUSINESS_OBJECT                 =
    IV_MOMENT                          =
    IV_WITH_DB_INSTANCE                =
   IMPORTING
     IBASE                              = l_ibase
     CONFIGURATION                      = l_CONFIGURATION
    EO_CBASE_REF                       =
EXCEPTIONS
    INVALID_INPUT                      = 1
    INVALID_INSTANCE                   = 2
    INSTANCE_IS_A_CLASSIFICATION       = 3
    OTHERS                             = 4
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
loop at l_CONFIGURATION into w_CONFIGURATION.
l_ROOT_OBJECT = w_CONFIGURATION-OWNER.
t_IBCO2_VALUE_TAB[] = w_CONFIGURATION-values[].
read table w_CONFIGURATION-values into w_IBCO2_VALUE_REC with key ATINN = '0000000222'.
w_IBCO2_VALUE_REC-ATWRT = 'TMP'.
modify w_CONFIGURATION-values from w_IBCO2_VALUE_REC index sy-tabix.
modify l_CONFIGURATION from w_CONFIGURATION index 1.
clear: w_CONFIGURATION.
endloop.
CALL FUNCTION 'CUCB_SET_CONFIGURATION'
EXPORTING
    ROOT_INSTANCE                      = l_CUOBJ
IS_CBASE_HEADER                    =
CHANGING
    CONFIGURATION                      = l_CONFIGURATION
EXCEPTIONS
INVALID_INPUT                      = 1
INVALID_INSTANCE                   = 2
INSTANCE_IS_A_CLASSIFICATION       = 3
OTHERS                             = 4
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'CUCB_CONFIGURATION_TO_DB'
EXPORTING
    ROOT_INSTANCE                       = l_CUOBJ
    ROOT_OBJECT                         = l_ROOT_OBJECT
FORCE_NEW_INSTANCE                  =
IV_WITHOUT_COMMIT_UPDATE            = ' '
IV_MATERIAL                         =
IV_LOCATION                         =
IV_TECHS                            =
IMPORTING
NEW_INSTANCE                        =
TABLES
EXP_NEW_NESTED_CUOBJS               =
EXCEPTIONS
INVALID_INSTANCE                    = 1
INVALID_ROOT_INSTANCE               = 2
NO_CHANGES                          = 3
ALREADY_REGISTERED_FOR_UPDATE       = 4
INSTANCE_IS_A_CLASSIFICATION        = 5
OTHERS                              = 6
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

Changing the Condition value in Quatation only and not in Order

Hi Gurus,
We have a Requirement from Client in which the Client should be Able to change the condition Value PR00 in the Quotation and not in Sales order......can someone please let me know how's that possible?
Because if we try to make Changes in Condition Type in V/06 it will also allow changes in Sales Order....

Hi
You can use user-exit USEREXIT_PRICING_PREPARE_TKOMP in the include MV45AFZZ.
IF VBAK-AUART = (Your quotation type)
LOOP AT XKOMV.
IF XKOMV-KSCHL = 'PR00'.
SELECT * FROM T685A INTO TABLE I_T685A WHERE KSCHL = 'PR00'.
READ TABLE I_T685A WITH KEY KSCHL = XKOMV-KSCHL.
I_T685A-KMANU = 'C'.
MODIFY I_T685A INDEX SY-TABIX.
MODIFY T685A FROM TABLE I_T685A.
REFRESH I_T685A.
ENDIF.
ENDLOOP.
like this discuss with your abapper and build the logic
regards
Prashanth

To change the batch value from Purchse requistion in PO

Dear all,
I have a batch value in the Purchse requistion and due to generation of reports I need to change the batch value in the PO.
When i try to change the batch value system is trowing an error that Batch value different from PR.
Please suggest me if I have any ways to change the batch value in PO. The message what I get cannot even be changed to a warning message.
Due to typical calcution of tax for my client. I need to change the batch value at PO.
Appreciate your help
Rrds,
Shiva

Hi Shiva,
It's not possible in standard.
The coding is in LMEREQSF01
    IF NOT l_eban-charg   IS INITIAL AND
       NOT im_creqs-charg IS INITIAL.                       "916757
      IF im_creqs-charg NE l_eban-charg.
        MESSAGE e631(06) WITH l_eban-banfn l_eban-bnfpo l_eban-charg
                INTO gl_dummy.
        mmpur_message_forced 'E' '06' '631'
                             l_eban-banfn l_eban-bnfpo l_eban-charg ''.
        finish_rule checked c_invalid. EXIT.
      ENDIF.
    ENDIF.
Unless you do the modification, or you cannot dismiss the error.
Thanks and regards,
Polly

Change the characteristic Values in Material master date

Hi Experts,
How do change the characterstic values in material master ? Is there any standard BAPI or t.ocde or LSMW
Best Rgds
Suma

I often changed classification with LSMW using IDOC CLFMAS

Change the characteristic Values in Material master dat

Hi Experts,
How do change the characterstic values in material master ? Is there any standard BAPI or t.ocde or LSMW
Best Rgds
Suma

Hi Suma,
Probably this question should be asked in another forum (MM) then the one for DMS related questions

Error in standard value key

Hi ,
I have created one new standard value key with four parameters,
In one of the parameters formula was missing,
i have entered it in Standard value key and trasported to producction and used it in Work Center.
Now my issue is, due to missing formula the system is showing error in my order creation , it's 100% right and acceptable,
But , the same error is howing in PS , PM order, where this Standard value is not all used,
in PS,PM standard value key is SAP0( no standard values), why it is happening as i m not using the new Std value key in PS/PM
Regards,
Pavan

Hi,
this is an error message,
In PM/PS order we are using different stndard value key,
This parameter is not at all used in those Standard keys, i have check every thing, that is what my confusion, Y it is throwing
error
Regards
Pavan

How do i change the Std. confirm key from 'AB' to 'Z1', receiving ACK IDOC.

Hi,
How do i change the Std. confirm key from 'AB' to 'Z1', when loading ACK IDOC.
Thanks

Hi Jorge,
Thanks for your help.
I change the output mode to "Collect IDocs" method, if I use SAP standard function POIM (RCCLMDAT), it will depend on change pointer to generate IDoc, and it includes function: RSEOUT00 ( and MASS_RSEOUT00 ) to collect and send IDoc.
The collect table is BDCP.
BR,

Extend/Change the Standard Fiori App code

Hi,
We have implemented FIORI App in our SAP landscape.After implementation app is running fine.I want the change the standard FIORI App code for a specific app like change the label,change the Background Image,Change the Font style etc.I googled and made changes according to the article provided.
Steps done to change the Standard app code.
1)Downloaded the source code and uploaded in eclipse.
2)Created a Extension Project and replaced the entire view with my new view.
3)Shared the project and submitted the changes in gateway system.
4)Created semantic object and other things required to show the custom app on launch pad.
5)But when I click on custom app developed on the Launch pad it is navigating to a blank screen with no UI elements.But standard app is working fine.
So please tell me the correct procedure to change the app and show it on Launch pad.
Tags edited by: Michael Appleby

Hi Ritesh,
Following are the steps I followed in extending a Fiori App.
I am trying to extend HCM_LR_APV(Approve Leave request ) app.
So I downloaded HCM_LR_APV BSP Application.
I uploaded in Eclipse IDE .I created an Extension Project(ZHCM_LR_APV) for this.
For testing I tried to change the Icon in one of the view.
So I replaced the S3 view by placing the Original Code same and changing the Icon only.
In Component.js file I gave the path to the parent application in Load function.See the below code for your reference.
jQuery.sap.declare("hcm.mgr.approve.leaverequests.CUST_HCM_LR_APV_EXT.Component");
sap.ui.component.load({
name: "hcm.mgr.approve.leaverequests",
url:"/sap/bc/ui5_ui5/sap/hcm_lr_apv",
hcm.mgr.approve.leaverequests.Component.extend("hcm.mgr.approve.leaverequests.CUST_HCM_LR_APV_EXT.Component", {
metadata: {
version : "1.0",
config : {
"sap.ca.i18Nconfigs": {
"bundleName":"hcm.mgr.approve.leaverequests.CUST_HCM_LR_APV_EXT.i18n.i18n"
customizing: {
"sap.ui.viewReplacements": {
"hcm.mgr.approve.leaverequests.view.S3": {
viewName: "hcm.mgr.approve.leaverequests.CUST_HCM_LR_APV_EXT.view.S3Custom",
type: "XML",
Then I submitted the changes and tested the Custom BSP Application.But I am getting the error as below
Error Message:
Failed to load resource: the server responded with a status of 404 (NOT FOUND) http://sapfiorisrvr.domain.com:portno/sap/bc/ui5_ui5/sap/zhcm_lr_apv_ext/Component-preload.js
Thanks&Regards,
Akhil Das

Approval Procedure to change the price of items

Hi!
i 'm trying to create a query to an Approval Procedure to change the unit price in the Purchase Order i create this query:
SELECT DISTINCT 'True' FROM POR1 T0 INNER JOIN OITM T1 ON T0.[ItemCode] = T1.[ItemCode] WHERE T1.[ItemCode] = $[$38.1.0] AND T1.[LastPurPrc] <> $[$38.14.0]
as you see this query compare is the Last Purchase Price is different than the actual unit price, and these for each line of item.
I think this is correct, and i configure the Approval Procedure, but when i check the AP in the Purchase Order changing the Unit Price, it gets me an error that says
1) [Microsoft][SQL Native Client][SQL Server] Error converting data type nvarchar to numeric.
What happend?
Am i doing something wrong ?
In easy term, i just want to execute an approval procedure when the user change the unit price in the purchase order.
Hope you can help me !
Thanks in Advance
Best Regards !

Xavier,
maybe you are with a problem thar you dont' know, i can to expain this point,
1. if you want one approval at level line (comparing prices), not possible to make this way the approval, because you don't have control at level line while the document isn't in database.
2. i bealeve that the better way is to make a store procedure for to insert each record into temp table while to add line in purchase order without (formatead seaches), now, when you create a purchase orden you need create a query for to search record in the temporal table with the condicion that you needed.
3. now, if you want to call a value on the screen (money), the better way is $[$38.1.number]
Good look,
OSCAR KLENNER
> Hi!
> i 'm trying to create a query to an Approval
> Procedure to change the unit price in the Purchase
> Order i create this query:
> SELECT DISTINCT 'True' FROM POR1 T0 INNER JOIN OITM
> T1 ON T0.[ItemCode] = T1.[ItemCode] WHERE
> T1.[ItemCode] = $[$38.1.0] AND T1.[LastPurPrc] <>
> $[$38.14.0]
> as you see this query compare is the Last Purchase
> Price is different than the actual unit price, and
> these for each line of item.
>
> I think this is correct, and i configure the Approval
> Procedure, but when i check the AP in the Purchase
> Order changing the Unit Price, it gets me an error
> that says
> 1) [Microsoft][SQL Native Client][SQL Server] Error
> converting data type nvarchar to numeric.
>
> What happend?
> Am i doing something wrong ?
>
> In easy term, i just want to execute an approval
> procedure when the user change the unit price in the
> purchase order.
>
> Hope you can help me !
> Thanks in Advance
> Best Regards !

F1 and F2 keys won't change to standard function keys even after changing keyboard preferences.

I want to use the function keys on my MacBook Pro as standard function keys. I checked the box in keyboard settings that's supposed to change this, and I changed the Mission Control shortcuts that corresponded with function keys. F3-F12 all seem to have gotten the message, but F1 and F2 still change the screen brightness and won't work as standard function keys no matter what I do. How can I fix this?

Hello w:
Welcome to Apple discussions.
Please fill in your profile so we understand your system configuration.
Barry

Procedure to change the standard value key of a work center

Similar Messages

Maybe you are looking for