Procedure to connect to HFR with Essbase.
Guys,
I have a few questions regarding connecting HFR to an Essbase App. The question seems silly, but this is something different than normal configuration.
We have Essbase 9x & HFR installed in one environment and configured without any issues as Instance 1. Now we have HFR installed in different environment/instance which needs to connect to an Essbase application of instance 1.
I have the following steps in mind. Please guide me with your inputs, if i missed anything.
1. Open the ports 1423, 32xxx-32xxx between the Instance2 HFR & Instance1 Essbase
2. Add Instance2 of HFR with Shared Services Instance1 and provision the users for the App. (Any idea on how to add this Shared Services & what ports to open??)
3. Connect to the App using Workspace of Instance2
Cheers,
mikki
You are jumping too many hoops for a simpler solution.
I am not sure about ports because it depends on your configuration. I would be surprised if you need to do this for internal communication on the same network. Once you have this figured out, you can just connect FR from your 'instance2' to Essbase in 'instance1' by simply creating a essbase database connection that points to instance1 server instead of instance2 server. Once you dont need instance1 essbase server, then you can just change database connection for report/s to a connection pointing instance2.
Similar Messages
-
Connection Between BIEE with ESSBASE?
Hi
could you please provide documment how to give the connection Between BIEE with ESSBASE?
thanksHi,
You should check Venkat's blog:
http://oraclebizint.wordpress.com/2008/06/07/hyperion-financial-reporting-getting-started/
Good Luck,
Daan Bakboord -
Connection Xcelsius with essbase
Hi expert.
Can ESSBASE is an external datasource for Xcelsius ?
and Have anybody know about the step for connect with essbase ?
Thank youHi
You cannot run Essbase queries directly within Xcelsisu as it uses VBA/COM addins to work which are not supported.
If you have SAP BusinessObjects Enterprise, look at creating a Universe over your Essbase queries and then use Webi or QaaWS to populate your Xcelsius model.
Regards
Charles -
DW Procedures to connect to MS ACCESS database located on remote server
I am confused about the procedures within Dreamweaver CS3 to connect to a MS ACCESS database on a remoter server.
I am working through a tutorial book, "Dreamweaver 8 with ASP, Cold Fusion and PHP Training from the Source", but the instructions are unclear concerning the procedures to connect to a MS ACCESS database located on a remote server.
The book indicates that the server administration has to create the DSN for you and screen shots indicate that you will result in a list of DSNs to choose from when creating the connections .asp file.
I went through the procedures to create a connections .asp and resulting in a connection without and tables (of course) because I do not initially have any connection information from my remote site.
I have generated the required two lines of code as follows for my MS ACCESS database connection on my remote server:
'Database connection info and provider
strCon="Provider=Microsoft.Jet.OLEDB.4.0;Data Source="&_
Server.MapPath("database\trans.mdb") & ";" &_
"User ID=xxx;Password=xxxxx"
The question that I have is:
How does this connection coding relate to the "connections/conn_newland.asp" file that was create within the Dreamweaver screens? How do I merge the ASP coding? The file (/connections/conn_newland.asp) generated within Dreamweaver is as follows:
<%
'FileName="Connection_odbc_conn_dsn.htm"
'Type="ADO"
'DesignationType="ADO"
'HTTP="true"
'Catelog=" "
'Schema
Dim MM_conn_newland_STRING
MM_conn_newland_STRINT = "dsn=newland;"
%>
Any advice would be appreciated. I know that this is simple but debugging an error from an ASP coding merge would be a "bear" to debug!I have not used MS Access myself (fortunately) but I believe it works much like the old, old way of achieving a multi-user database in FileMaker.
That is, it is not a true client-server database but more a peer-to-peer database and that each peer opens the same database file which is available to multiple user via file sharing. Therefore as elikness said it should just be a matter of putting the files on your Lion Server and then sharing that folder/volume using SMB sharing.
However one thing to be aware of, since MS Access is not a true client-server database I would imagine it uses record locking to manage simultaneous direct access to records in the same files. File or Record locking is something that has historically been a bit flakey when using Windows clients with a Mac file server (and probably vice versa).
While I am not proposing it as a solution to consider seriously, it is worth you knowing that FileMaker Pro is a database system that is available for both Mac and Windows and depending on how you configure things can be considered to stretch from a configuration very similar to MS Access at the low end all the way to a high-end MS SQL Server style setup at the top end. See http://www.filemaker.com for details.
There is also a a third-party tool available for migrating databases to or from FileMaker Pro and it can convert MS Access databases to FileMaker Pro see http://www.fmpromigrator.com/
You could use FileMaker Pro just on Windows machines if you wish. -
Error in access with Essbase Studio Console
We get error to connect with Essbase Studio Console.
"children for Root. Reason: Unknown package name 'drillthrough'.Line = 1."
It is a new installation.
EPM 11.1.2.2Hi,
During the installation of Essbase Studio only, ess_es_server.jar and ess_japi.jar are missing. If you install both Essbase and Studio, they are not missing.
This is due to unpublished bug 14232814 - DURING THE INSTALLATION ONLY STUDIO SOME .JAR FILES NOT INSTALLED
Try the following:
Stop Essbase Studio
copy files into EPMSystem11R1\common\EssbaseJavaAPI\11.1.2.0\lib
ess_es_server.jar
ess_japi.jar
If folder does not exist create it.
1. Stop essbase Studio.
2. Drop tables from relational database
3. Recreate tables.
4. Start Essbase Studio.
Scripts for dropping & recreating catalog located under
oracle\middleware\EPMSystem11R1\products\Essbase\EssbaseStudio\Server\database\common\db_name
Hope it helps....
KosuruS
PS: If the above information is helpful, mark it :) -
Error while calling an procedure using an external table with C#.
Hello,
I am developping a scheduler application with Visual Studio 2010 (C#) to start my PL/SQL procedures.
Everything works fine with every procedure but one who is reading the content of an external table.
Strange thing is when i launch the same procedure with Toad, i have no problem, but when i launch it with my C# code :
OracleCommand cmdMET = new OracleCommand();
cmdMET.CommandText = "STG_AE.M_MET_S_EXT_DEFECT";
cmdMET.CommandType = CommandType.StoredProcedure;
cmdMET.Connection = con;
//OracleParameter retvalMET = new OracleParameter("retval", OracleDbType.Varchar2, 50);
//retvalMET.Direction = ParameterDirection.ReturnValue;
//cmdMET.Parameters.Add(retvalMET);
cmdMET.ExecuteNonQuery();
I've got this error :
ORA-29913: error in executing ODCIEXTTABLEFETCH callout
ORA-01722: invalid number
ORA-06512: at "STG_AE.M_MET_S_EXT_DEFECT", line 8
ORA-06512: at "STG_AE.MET_SRC", line 10
ORA-06512: at "STG_AE.MET", line 14
ORA-06512: at line 1
I can't figure out why it works when i launch it with Toad and why i get this error when launching it with C#... Any advice would be great !
Thanks!You're right!
Adding
string sql = "ALTER SESSION SET NLS_NUMERIC_CHARACTERS = \",.\"";
OracleCommand cmd = new OracleCommand(sql, con);
cmd.CommandType = CommandType.Text;
OracleDataReader dr = cmd.ExecuteReader();
solved the problem !
Thanks a lot =) -
Step by step procedure to connect SAP XI(Seerburger adapter) wi EDI partner
hi,
I need to know what kind of scenario we have go with seerburger adapter to connect with EDI partner?
give some example scenarios and step by step procedure to connect SAP XI(Seerburger adapter) with EDI partner?
regards
Ruban
Message was edited by:
ruban Rhi,
i found these weblogs,
/people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
/people/william.li/blog/2006/03/17/how-to-get-started-using-conversion-agent-from-itemfield
/people/paul.medaille/blog/2005/11/17/more-on-the-sap-conversion-agent-by-itemfield
other than any other weblog for this scenario for AS2 adapter for abap proxy to EDI partner to send purchase order ? -
Help with Essbase 9 and the Java API
Hi, I am trying to connect to Essbase from a Java desktop application and I am unable to do so. I need to know if I am in principle doing the right things and if I have the correct environment set up.
We have a server with Essbase version 9.3.1. We normally use essbase via the Excel Addin, and I have already written Excel applications that utilise both the addin and the Essbase VB API. Now I need to connect to Essbase but from outside Excel and using the Java API. I have no idea what APS is nor does my Essbase Administrator.
My application has the following code (adapted from a post in this forum) -
public static void main(String[] args) {
String s_userName = "user";
String s_password = "password";
String s_olapSvrName = "ustca111";
String s_provider = "http://localhost:13080/aps/JAPI";
try{
IEssbase ess = IEssbase.Home.create(IEssbase.JAPI_VERSION);
IEssDomain dom = ess.signOn(s_userName, s_password, false, null, s_provider);
IEssOlapServer olapSvr = dom.getOlapServer(s_olapSvrName);
olapSvr.connect();
System.out.println("Connection to Analyic server '" + olapSvr.getName() + "' was successful.");
olapSvr.disconnect();
}catch(EssException exp){
System.out.println(exp.getMessage());
I am running my application on my computer, not on the Essbase server, and the username I am using is the same one I use (as a user of Essbase) via the Essbase Addin in Excel, not an admin login.
When I run the app I get:
"Cannot connect to Provider Server.Make sure the signon parameters are correct and the Provider Server is running."
Please can you confirm:
1) Do I need an admin login for my client application to connect to the Essbase server or can I use a normal read-access login, like the one I use in Excel?
2) Is the provider always the same regardless of the computer, i.e. "http://localhost:13080/aps/JAPI"; How do I know what this has to be? Where do I get this information from?
3) How can I make sure that the Server is running the necessary "Provider Server", is this just a service that will show on services.msc of the server? What should I ask the Essbase Administrator for him to tell me what I need?
Thank you very much.
LeoTim, when I look in my computer's Essbase installation path I can only find the following jar files (from the ones you have listed).
C:\Hyperion\AnalyticServices\JavaAPI\external\css\log4j-1.2.8.jar
C:\Hyperion\AnalyticServices\JavaAPI\lib\ess_es_server.jar
C:\Hyperion\AnalyticServices\JavaAPI\lib\ess_japi.jar
I do not have css-9_3_1.jar or interop-sdk.jar.
In order to try the embedded mode, I added the three jars I have to the classpath, and have re-built and ran with "embedded" as the provider. This is what I got in my output screen:
run:
Error accessing the properties file. essbase.properties: essbase.properties (The system cannot find the file specified). Using default values.
Hyperion Provider Services - Release 9.3.1.0.0 Build 168
Copyright (c) 1991, 2007 Oracle and / or its affiliates. All rights reserved.
connection mode : EMBEDDED
essbase.properties: essbase.properties
domain.db location: domain.db
console log enable : false
file log enable : false
logRequest : false
logLevel : ERROR
java System properties -DESS_ES_HOME: null
Scenario Markets Total Legal Entities Products
Jan Feb Mar
Standard Units 1.053264054859E7 1.60849856762E7 2.6234553348270003E7
BUILD SUCCESSFUL (total time: 2 seconds)
As you can see, this has worked (as I get the data I was looking for at the end), but when I had the url in the provider string, I just get the below, without the initial errors:
run:
Scenario Markets Total Legal Entities Products
Jan Feb Mar
Standard Units 1.053264054859E7 1.60849856762E7 2.6234553348270003E7
BUILD SUCCESSFUL (total time: 2 seconds)
Now that I can get both modes to work I intend to write a Windows application, place it in a shared drive, and allow multiple users to use it. Which mode should I use?
By the way, I found the essbase.properties file in C:\Hyperion\AnalyticServices\JavaAPI\bin, but when I add it to my app and test it in embedded mode, I get even more errors, but it still gives me the result...output below:
run:
java.io.FileNotFoundException: ..\bin\apsserver.log (The system cannot find the path specified)
at java.io.FileOutputStream.openAppend(Native Method)
at java.io.FileOutputStream.<init>(FileOutputStream.java:177)
at java.io.FileOutputStream.<init>(FileOutputStream.java:102)
at org.apache.log4j.FileAppender.setFile(FileAppender.java:272)
at org.apache.log4j.RollingFileAppender.setFile(RollingFileAppender.java:156)
at org.apache.log4j.FileAppender.<init>(FileAppender.java:96)
at org.apache.log4j.RollingFileAppender.<init>(RollingFileAppender.java:60)
at com.hyperion.dsf.server.framework.BaseLogger.addAppender(Unknown Source)
at com.hyperion.dsf.server.framework.BaseLogger.setFileLogEnable(Unknown Source)
at com.hyperion.dsf.server.framework.DsfLoggingService.sm_initialize(Unknown Source)
at com.essbase.server.framework.EssOrbPluginDirect.setupLoggingService(Unknown Source)
at com.essbase.server.framework.EssServerFramework.<init>(Unknown Source)
at com.essbase.api.session.EssOrbPluginEmbedded.<init>(Unknown Source)
at com.essbase.api.session.EssOrbPlugin.createPlugin(Unknown Source)
at com.essbase.api.session.Essbase.signOn(Unknown Source)
Hyperion Provider Services - Release 9.3.1.0.0 Build 168
at com.essbase.api.session.Essbase.signOn_internal(Unknown Source)
at com.essbase.api.session.Essbase.signOn(Unknown Source)
at esstest.Main.main(Main.java:22)
Copyright (c) 1991, 2007 Oracle and / or its affiliates. All rights reserved.
connection mode : EMBEDDED
log4j:WARN No appenders could be found for logger (com.hyperion.dsf.server.framework.BaseLogger).
essbase.properties: essbase.properties
log4j:WARN Please initialize the log4j system properly.
domain.db location: ./data/domain.db
console log enable : false
file log enable : true
logFileName : ../bin/apsserver.log
logRequest : false
logLevel : WARN
java System properties -DESS_ES_HOME: null
Scenario Markets Total Legal Entities Products
Jan Feb Mar
Standard Units 1.053264054859E7 1.60849856762E7 2.6234553348270003E7
BUILD SUCCESSFUL (total time: 3 seconds)
Thank you
Leo -
Doing OBIEE with Essbase as datasource, anybody who has experience?
Hello guys
Does anybody have good experience dealing with essbase data on OBIEE? Essbase doesn't seem to be a relational database like oracle, data are stored as cube. One cube contains dimesion and fact attributes with hierarchical levels defined in essbase.
I don't have experience dealing with these type of scenario, therefore I run into a lot of issues when I try to create report on answers..
Typically, when I apply any conversation functions or "SQL expression" values on date column filters or contents (such as cast(column as date), or filter on current_date on SQL Expressions) and create reports with measures, I get errors: [nQSError: 42043] An external aggregate is found in an outer query block. (HY000)
If create reports only with date column alone with the above applied, I get errors like inconsistent data type or something..
I believe that for some reasons when OBIEE sends the query to essbase and get converted into MDX, something got lost in translations.
With the same environment, I imagine if I were to create some dynamic variables with select statement, it will also not work since there is no "column" and "table" in essbase the same way as in relational database. So how would I define dynamic variables with max sales or something?
So is there any help I can get in terms of dealing with essbase on obiee?
Any pointers will be greatly appreciated
ThanksWithout access to the rpd you're not going to get far. Yes, you can achieve both things, but it will mean writing MDX and to use MDX in both the filters and the columns is not something I'd recommend since you'll be facing loads of issues.
Date filter:
The "normal" function you're using won't work. That's for sure. You will have to wrap the whole thing into an EVALUATE and write MDX...like the Lag function I mentioned before. If your time dimension is just taken over from Essbase in the normal drag-and-drop way, then it won't be a full "time dimension" anyway.
A column formula along the lines of this:
EVALUATE('[Time Period].[2009-04-15].Lag(7)')
Measure calculation:
Again, without access to the rpd this will be pretty hard to do due to the question where the aggregation actually happens. Venkat wrote about that recently.
http://oraclebizint.wordpress.com/2009/04/06/oracle-bi-ee-10134-and-essbase-connectivity-understanding-aggregations-part-1/
http://oraclebizint.wordpress.com/2009/04/07/oracle-bi-ee-10134-and-essbase-connectivity-understanding-aggregations-part-2/
http://oraclebizint.wordpress.com/2009/04/09/oracle-bi-ee-10134-and-essbase-connectivity-understanding-aggregations-part-3/
http://oraclebizint.wordpress.com/2009/04/13/oracle-bi-ee-10134-and-essbase-connectivity-understanding-aggregations-part-4/
Cheers,
Christi@n -
Could not connect to Administration server Essbase in EAS console 11.1.2.2
Hi All,
I successfully installed and configured Essbase 11.1.2.2 version. When I tried to connect with administration server in eas console it throwing me error as,
Could not connect to Administration server Essbase.
Kindly guide me.
Thanks and Regards
SaiHi John,
Thanks for your response. These are the following message I found in HyS9eas-sysout.log and HyS9eas-syserr.log.
HyS9eas-sysout.log:
<May 11, 2012 8:43:26 PM IST> <Error> <HTTP> <BEA-101216> <Servlet: "InitServlet" failed to preload on startup in Web application: "WebAnalysis".
com.hyperion.atf.services.ServiceManager$ServiceRecursiveInitException: Could not start critical service: "assignable.admin", all services are being rolled back.
at com.hyperion.atf.services.ServiceManager.setServiceContainer(ServiceManager.java:591)
at com.hyperion.atf.services.ServiceManager.getService(ServiceManager.java:309)
at com.hyperion.atf.services.ServiceManager.getService(ServiceManager.java:341)
at com.hyperion.atf.security.assignables.AssignableManager.getAssignableAdmin(AssignableManager.java:28)
at com.hyperion.atf.security.assignables.AssignableManager.getDefaultHomeDirLocation(AssignableManager.java:77)
Truncated. see log file for complete stacktrace
>
<May 11, 2012 8:43:27 PM IST> <Error> <Deployer> <BEA-149231> <Unable to set the activation state to true for the application 'WEBANALYSIS [Version=11.1.2.0]'.
weblogic.application.ModuleException: [HTTP:101216]Servlet: "InitServlet" failed to preload on startup in Web application: "WebAnalysis".
com.hyperion.atf.services.ServiceManager$ServiceRecursiveInitException: Could not start critical service: "assignable.admin", all services are being rolled back.
at com.hyperion.atf.services.ServiceManager.setServiceContainer(ServiceManager.java:591)
at com.hyperion.atf.services.ServiceManager.getService(ServiceManager.java:309)
at com.hyperion.atf.services.ServiceManager.getService(ServiceManager.java:341)
at com.hyperion.atf.security.assignables.AssignableManager.getAssignableAdmin(AssignableManager.java:28)
at com.hyperion.atf.security.assignables.AssignableManager.getDefaultHomeDirLocation(AssignableManager.java:77)
at com.hyperion.analyzer.servlet.HYAInitServlet.checkUserDir(Unknown Source)
at com.hyperion.analyzer.servlet.HYAInitServlet.init(Unknown Source)
at javax.servlet.GenericServlet.init(GenericServlet.java:241)
at weblogic.servlet.internal.StubSecurityHelper$ServletInitAction.run(StubSecurityHelper.java:283)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64)
at weblogic.servlet.internal.StubLifecycleHelper.createOneInstance(StubLifecycleHelper.java:58)
at weblogic.servlet.internal.StubLifecycleHelper.<init>(StubLifecycleHelper.java:48)
at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:539)
at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletContext.java:1981)
at weblogic.servlet.internal.WebAppServletContext.loadServletsOnStartup(WebAppServletContext.java:1955)
at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1874)
at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3155)
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:487)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:201)
at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:249)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:28)
at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:672)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:52)
at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:31)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:261)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:220)
at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:170)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:124)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1520)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:484)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
Truncated. see log file for complete stacktrace
Caused By: com.hyperion.atf.services.ServiceManager$ServiceRecursiveInitException: Could not start critical service: "assignable.admin", all services are being rolled back.
at com.hyperion.atf.services.ServiceManager.setServiceContainer(ServiceManager.java:591)
at com.hyperion.atf.services.ServiceManager.getService(ServiceManager.java:309)
at com.hyperion.atf.services.ServiceManager.getService(ServiceManager.java:341)
at com.hyperion.atf.security.assignables.AssignableManager.getAssignableAdmin(AssignableManager.java:28)
at com.hyperion.atf.security.assignables.AssignableManager.getDefaultHomeDirLocation(AssignableManager.java:77)
Truncated. see log file for complete stacktrace
>
<May 11, 2012 8:43:39 PM IST> <Notice> <Cluster> <BEA-000197> <Listening for announcements from cluster using unicast cluster messaging>
<May 11, 2012 8:43:39 PM IST> <Notice> <Cluster> <BEA-000133> <Waiting to synchronize with other running members of EPMServer.>
<May 11, 2012 8:43:42 PM IST> <Warning> <Log Management> <BEA-170011> <The LogBroadcaster on this server failed to broadcast log messages to the admin server. The Admin server may not be running. Message broadcasts to the admin server will be disabled.>
<May 11, 2012 8:44:11 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<May 11, 2012 8:44:12 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<May 11, 2012 8:44:21 PM IST> <Notice> <Cluster> <BEA-000162> <Starting "async" replication service with remote cluster address "null">
<May 11, 2012 8:44:24 PM IST> <Notice> <Security> <BEA-090171> <Loading the identity certificate and private key stored under the alias DemoIdentity from the jks keystore file C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoIdentity.jks.>
<May 11, 2012 8:44:29 PM IST> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoTrust.jks.>
<May 11, 2012 8:44:29 PM IST> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file C:\Oracle\Middleware\jrockit_160_29\jre\lib\security\cacerts.>
<May 11, 2012 8:44:29 PM IST> <Alert> <Security> <BEA-090152> <Demo trusted CA certificate is being used in production mode: [
Version: V3
Subject: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState, C=US
Signature Algorithm: MD5withRSA, OID = 1.2.840.113549.1.1.4
Key: Sun RSA public key, 512 bits
modulus: 9550192877869244258838480703390456015046425375252278279190673063544122510925482179963329236052146047356415957587628011282484772458983977898996276815440753
public exponent: 65537
Validity: [From: Fri Mar 22 01:42:27 IST 2002,
To: Wed Mar 23 01:42:27 IST 2022]
Issuer: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState, C=US
SerialNumber: [ 33f10648 fcde0deb 4199921f d64537f4]
Certificate Extensions: 1
[1]: ObjectId: 2.5.29.15 Criticality=true
KeyUsage [
Key_CertSign
Algorithm: [MD5withRSA]
Signature:
0000: 9D 26 4C 29 C8 91 C3 A7 06 C3 24 6F AE B4 F8 82 .&L)......$o....
0010: 80 4D AA CB 7C 79 46 84 81 C4 66 95 F4 1E D8 C4 .M...yF...f.....
0020: E9 B7 D9 7C E2 23 33 A4 B7 21 E0 AA 54 2B 4A FF .....#3..!..T+J.
0030: CB 21 20 88 81 21 DB AC 90 54 D8 7D 79 63 23 3C .! ..!...T..yc#<
] The system is vulnerable to security attacks, since it trusts certificates signed by the demo trusted CA.>
<May 11, 2012 8:44:29 PM IST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=Entrust Root Certification Authority - G2,OU=(c) 2009 Entrust\, Inc. - for authorized use only,OU=See www.entrust.net/legal-terms,O=Entrust\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<May 11, 2012 8:44:29 PM IST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=thawte Primary Root CA - G3,OU=(c) 2008 thawte\, Inc. - For authorized use only,OU=Certification Services Division,O=thawte\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<May 11, 2012 8:44:29 PM IST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 3,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<May 11, 2012 8:44:29 PM IST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 2,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<May 11, 2012 8:44:29 PM IST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GlobalSign,O=GlobalSign,OU=GlobalSign Root CA - R3". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<May 11, 2012 8:44:29 PM IST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "OU=Security Communication RootCA2,O=SECOM Trust Systems CO.\,LTD.,C=JP". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<May 11, 2012 8:44:29 PM IST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=VeriSign Universal Root Certification Authority,OU=(c) 2008 VeriSign\, Inc. - For authorized use only,OU=VeriSign Trust Network,O=VeriSign\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<May 11, 2012 8:44:29 PM IST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=KEYNECTIS ROOT CA,OU=ROOT,O=KEYNECTIS,C=FR". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<May 11, 2012 8:44:29 PM IST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GeoTrust Primary Certification Authority - G3,OU=(c) 2008 GeoTrust Inc. - For authorized use only,O=GeoTrust Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<May 11, 2012 8:44:29 PM IST> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 127.0.0.1:9000 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<May 11, 2012 8:44:29 PM IST> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 172.16.2.14:9000 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<May 11, 2012 8:44:29 PM IST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure" is now listening on 172.16.2.14:9443 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<May 11, 2012 8:44:29 PM IST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[1]" is now listening on 127.0.0.1:9443 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<May 11, 2012 8:44:29 PM IST> <Notice> <WebLogicServer> <BEA-000358> <Started WebLogic Independent Managed Server "EPMServer0" for domain "EPMSystem" running in Production Mode>
<May 11, 2012 8:44:29 PM IST> <Warning> <JMX> <BEA-149510> <Unable to establish JMX Connectivity with the Adminstration Server AdminServer at <JMXServiceURL:null>.>
<May 11, 2012 8:44:37 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<May 11, 2012 8:44:38 PM IST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
HyS9eas-syserr.log:
Creating rebind thread to RMI -
Create Java application with Essbase
Dear Experts
I have a demand for a potential client.
Where I believe it is best to implement an application with Java or APEX another relational database and Essbase.
How Hyperion Planning and others.
But not using Hyperion Planning.
How would integrate it with Essbase?
How should I build a Java application without losing any of Essbase?
Anyone ever done this?
What documentation should I read about this?
Many questions and design challenges.
Thanks for allDear J.M. and Evgeniy.Rasyuk
Its many useful responstas way.
J.M.
I do not believe that Oracle would take steps for me create a Hyperion Planning. -ok.
Then all the resources used by Planning and other apps should be available for APIs and MaxL or otherwise connect, execute and monitor Essbase Database.
I believe there is a significant demand for this scenario using technology Essbase.
It's a big four who has requested an opinion on this.
Thank you,
MMB -
Is Excel-Addin 9.3 Compatible with Essbase 7.0.1
Hi all,
I am getting the following error when i am trying to connect System 7 Essbase database through Excel 9.3 Ad din.
Unknown Command [<NewAlt] in Report
The Excel-ad din 7.0.1 works fine both with system 9 and system7 Essbase database.I am able to connect and retrieve data from the database without any issues.
Please advice,
ThanksIt's even compatible with essbase 6.5.1, I created a proof of concept as an example against an old data source and it seems to work as well as the current 931 version.
-
Smartview 11.1.2.2.300 with Essbase 11.1.1.3
Hi,
I´m having problems connecting Smartview 11.1.2.2.300 with Essbase 11.1.1.3
Can anyone help me with this issue?
I've been looking in the forum, but I haven´t found answers to solve the problem.
Thanks in advance.I'm using private connection. The error is "Common Provider null datasource error".
I went to Doc 1470962.1 and it says the solution are: Both Essbase and Provider Services must be at least 11.1.1.3.500 or greater.
So, I think I have to patch both Essbase and APS to solve the issue, but I don't know what patches are and what's the impact applying those patches.
Thanks! -
Planning not communicating with Essbase server
Hi,
I've done a fresh install for 64 bit EPM 11.1.1.3. Every individual component is running fine. I can log into SS,EAS console, create delete application on essbase server, log into workspace and planning.
However when I'm trying to create a datasource and trying to connect to Essbase database -> press validate button - i get an error called "an error occured" on a blank white screen. I'm trying to login using admin user id..
Are there any preliminary steps involved in configuring planning with essbase ?
What should I look for here.. which log files?. There is not much info in planning log file...
Any pointers will be appreciated.. Thanks in advance!!Hi,
Thanks for the reply..
Any suggestions about the errors below will be helpful -
The Hys9sharedservices-sysout.log has the following error -
24/07/2012 18:38:50 org.apache.coyote.http11.Http11BaseProtocol init
INFO: Initializing Coyote HTTP/1.1 on http-28080
24/07/2012 18:38:50 org.apache.catalina.startup.Catalina load
INFO: Initialization processed in 546 ms
24/07/2012 18:38:50 org.apache.catalina.core.StandardService start
INFO: Starting service Catalina
24/07/2012 18:38:50 org.apache.catalina.core.StandardEngine start
INFO: Starting Servlet Engine: Hyperion Embedded Java Container/1.0.0
24/07/2012 18:38:50 org.apache.catalina.core.StandardHost start
INFO: XML validation disabled
log dir isD:\Hyperion\logs\SharedServices9
urlManifest jar:file:/D:/Hyperion/deployments/Tomcat5/SharedServices9/webapps/interop/WEB-INF/lib/interop-mmc.jar!/META-INF/MANIFEST.MF
Shared Services Version: 11.1.1.3.24
Shared Services Drop Number: 6
Attempting to verify the database configuration
Attempting to verify the database configuration
Database configuration test passed.
24 Jul 2012 18:39:21 - org.apache.slide.common.Domain - INFO - Auto-Initializing Domain
24 Jul 2012 18:39:21 - org.apache.slide.common.Domain - INFO - Configuration found in classpath
24 Jul 2012 18:39:21 - org.apache.slide.common.Domain - INFO - Domain configuration : {org.apache.slide.lock=true, org.apache.slide.versioncontrol=true, org.apache.slide.debug=false, org.apache.slide.search=true, org.apache.slide.security=true, org.apache.slide.urlEncoding=UTF-8, org.apache.slide.domain=D:/Hyperion/deployments/Tomcat5/SharedServices9/config/Domain.xml}
configURL: file:///D:/Hyperion/deployments/Tomcat5/SharedServices9/config/CSS.xml
Done initialize: com.hyperion.css.CSSAPIImpl@1a0b53e
connection pool registered:dbcpPool-org.apache.commons.pool.impl.GenericObjectPool@1ea0105
connection pool registered:dbcpPool-org.apache.commons.pool.impl.GenericObjectPool@f449b8
CMSOfflineServlet Initialized
Adding audit listener
Shared Services Initialized Successfully
2012-07-24 18:39:41,853 [main] ERROR com.hyperion.ces.utils.db.DBRegistryManager.<init>(DBRegistryManager.java:74) - Failed to get Registry Instance! DB Connection is not existing for SharedService. Check registry for SharedService.
2012-07-24 18:39:41,856 [main] ERROR com.hyperion.workflow.engine.server.repository.WfDomainStoreRdbms.initialize(WfDomainStoreRdbms.java:167) - java.lang.Exception: Failed to get Registry Instance! DB Connection is not existing for SharedService. Check registry for SharedService.
2012-07-24 18:39:41,856 [main] ERROR com.hyperion.workflow.engine.server.repository.WfDomainStoreRdbms.initialize(WfDomainStoreRdbms.java:167) - java.lang.Exception: Failed to get Registry Instance! DB Connection is not existing for SharedService. Check registry for SharedService.
2012-07-24 18:39:41,861 [main] ERROR com.hyperion.cesdsf.server.framework.DsfServer.init(DsfServer.java:51) - com.hyperion.workflow.engine.api.base.WfException: Failed to get Registry Instance! DB Connection is not existing for SharedService. Check registry for SharedService.
2012-07-24 18:39:41,905 [main] ERROR com.hyperion.workflow.engine.server.framework.WorkflowEngineServiceLocal.wfx(WorkflowEngineServiceLocal.java:2584) - Cannot getUsers.
java.lang.NullPointerException
at com.hyperion.workflow.engine.server.framework.WorkflowEngineServiceLocal.getUsers(WorkflowEngineServiceLocal.java:780)
at com.hyperion.workflow.engine.server.framework.WorkflowEngineServiceLocal.getUserFromCES(WorkflowEngineServiceLocal.java:536)
at com.hyperion.workflow.engine.server.framework.WorkflowEngineServiceLocal.systemSignOn(WorkflowEngineServiceLocal.java:341)
at com.hyperion.workflow.engine.server.framework.WorkflowEngineServiceLocal.signOn(WorkflowEngineServiceLocal.java:387)
at com.hyperion.workflow.engine.api.base.WorkflowEngine.signOn(WorkflowEngine.java:80)
at com.hyperion.workflow.engine.api.base.WorkflowEngine.trustedSignOn(WorkflowEngine.java:94)
at com.hyperion.workflow.engine.api.base.WorkflowEngine.trustedSignOn(WorkflowEngine.java:90)
at com.hyperion.workflow.agent.TaskReceiver.init(TaskReceiver.java:34)
at javax.servlet.GenericServlet.init(GenericServlet.java:211)
at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1105)
at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:932)
at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:3917)
at org.apache.catalina.core.StandardContext.start(StandardContext.java:4201)
at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:759)
at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:739)
at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:524)
at org.apache.catalina.startup.HostConfig.deployDirectory(HostConfig.java:904)
at org.apache.catalina.startup.HostConfig.deployDirectories(HostConfig.java:867)
at org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:474)
at org.apache.catalina.startup.HostConfig.start(HostConfig.java:1122)
at org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java:310)
at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:119)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1021)
at org.apache.catalina.core.StandardHost.start(StandardHost.java:718)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1013)
at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:442)
at org.apache.catalina.core.StandardService.start(StandardService.java:450)
at org.apache.catalina.core.StandardServer.start(StandardServer.java:709)
at org.apache.catalina.startup.Catalina.start(Catalina.java:551)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:294)
at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:432)
2012-07-24 18:39:41,907 [main] ERROR com.hyperion.workflow.engine.server.framework.WorkflowEngineServiceLocal.wfx(WorkflowEngineServiceLocal.java:2584) - Cannot signOn.
com.hyperion.workflow.engine.api.base.WfException: Cannot getUsers.null
at com.hyperion.workflow.engine.server.framework.WorkflowEngineServiceLocal.wfx(WorkflowEngineServiceLocal.java:2593)
at com.hyperion.workflow.engine.server.framework.WorkflowEngineServiceLocal.getUsers(WorkflowEngineServiceLocal.java:782)
at com.hyperion.workflow.engine.server.framework.WorkflowEngineServiceLocal.getUserFromCES(WorkflowEngineServiceLocal.java:536)
at com.hyperion.workflow.engine.server.framework.WorkflowEngineServiceLocal.systemSignOn(WorkflowEngineServiceLocal.java:341)
at com.hyperion.workflow.engine.server.framework.WorkflowEngineServiceLocal.signOn(WorkflowEngineServiceLocal.java:387)
at com.hyperion.workflow.engine.api.base.WorkflowEngine.signOn(WorkflowEngine.java:80)
at com.hyperion.workflow.engine.api.base.WorkflowEngine.trustedSignOn(WorkflowEngine.java:94)
at com.hyperion.workflow.engine.api.base.WorkflowEngine.trustedSignOn(WorkflowEngine.java:90)
at com.hyperion.workflow.agent.TaskReceiver.init(TaskReceiver.java:34)
at javax.servlet.GenericServlet.init(GenericServlet.java:211)
at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1105)
at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:932)
at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:3917)
at org.apache.catalina.core.StandardContext.start(StandardContext.java:4201)
at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:759)
at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:739)
at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:524)
at org.apache.catalina.startup.HostConfig.deployDirectory(HostConfig.java:904)
at org.apache.catalina.startup.HostConfig.deployDirectories(HostConfig.java:867)
at org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:474)
at org.apache.catalina.startup.HostConfig.start(HostConfig.java:1122)
at org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java:310)
at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:119)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1021)
at org.apache.catalina.core.StandardHost.start(StandardHost.java:718)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1013)
at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:442)
at org.apache.catalina.core.StandardService.start(StandardService.java:450)
at org.apache.catalina.core.StandardServer.start(StandardServer.java:709)
at org.apache.catalina.startup.Catalina.start(Catalina.java:551)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:294)
at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:432)
2012-07-24 18:39:41,908 [main] ERROR com.hyperion.workflow.agent.TaskReceiver.init(TaskReceiver.java:39) - Error Getting the workflowEngine Cannot signOn.Cannot getUsers.null
24/07/2012 18:39:41 org.apache.coyote.http11.Http11BaseProtocol start
INFO: Starting Coyote HTTP/1.1 on http-28080
24/07/2012 18:39:42 org.apache.jk.common.ChannelSocket init
INFO: JK: ajp13 listening on /0.0.0.0:28082
24/07/2012 18:39:42 org.apache.jk.server.JkMain start
INFO: Jk running ID=0 time=0/32 config=null
24/07/2012 18:39:42 org.apache.catalina.startup.Catalina start
INFO: Server startup in 51521 ms
24-Jul-2012 18:39:42, /files, HEAD, 401 "Unauthorized", 6 ms, %v
24-Jul-2012 18:39:42, /files, HEAD, 200 "OK", 281 ms, %v
24-Jul-2012 18:39:43, /files, HEAD, 401 "Unauthorized", 1 ms, %v
24-Jul-2012 18:39:43, /files, HEAD, 200 "OK", 15 ms, %v
24-Jul-2012 18:39:43, /files, HEAD, 401 "Unauthorized", 1 ms, %v
24-Jul-2012 18:39:43, /files, HEAD, 200 "OK", 14 ms, %v
24-Jul-2012 18:39:43, /files, HEAD, 401 "Unauthorized", 0 ms, %v
24-Jul-2012 18:39:43, /files, HEAD, 200 "OK", 18 ms, %v
24-Jul-2012 18:39:44, /files, HEAD, 401 "Unauthorized", 0 ms, %v
24-Jul-2012 18:39:44, /files, HEAD, 200 "OK", 20 ms, %v
24-Jul-2012 18:39:44, /files, HEAD, 401 "Unauthorized", 1 ms, %v
24-Jul-2012 18:39:44, /files, HEAD, 200 "OK", 14 ms, %v
24-Jul-2012 18:39:44, /files, HEAD, 401 "Unauthorized", 0 ms, %v
I did look in the logs Sharedservices_taskflow.log in sharedservices folder has the following error -
"Cannot signOn.Cannot getUsers.null
2012-07-24 18:39:41,853 [main] ERROR com.hyperion.ces.utils.db.DBRegistryManager.<init>(DBRegistryManager.java:74) - Failed to get Registry Instance! DB Connection is not existing for SharedService. Check registry for SharedService.
2012-07-24 18:39:41,856 [main] ERROR com.hyperion.workflow.engine.server.repository.WfDomainStoreRdbms.initialize(WfDomainStoreRdbms.java:167) - java.lang.Exception: Failed to get Registry Instance! DB Connection is not existing for SharedService. Check registry for SharedService.
2012-07-24 18:39:41,856 [main] ERROR com.hyperion.workflow.engine.server.repository.WfDomainStoreRdbms.initialize(WfDomainStoreRdbms.java:167) - java.lang.Exception: Failed to get Registry Instance! DB Connection is not existing for SharedService. Check registry for SharedService.
2012-07-24 18:39:41,861 [main] ERROR com.hyperion.cesdsf.server.framework.DsfServer.init(DsfServer.java:51) - com.hyperion.workflow.engine.api.base.WfException: Failed to get Registry Instance! DB Connection is not existing for SharedService. Check registry for SharedService.
2012-07-24 18:39:41,905 [main] ERROR com.hyperion.workflow.engine.server.framework.WorkflowEngineServiceLocal.wfx(WorkflowEngineServiceLocal.java:2584) - Cannot getUsers.
java.lang.NullPointerException
at com.hyperion.workflow.engine.server.framework.WorkflowEngineServiceLocal.getUsers(WorkflowEngineServiceLocal.java:780)
at com.hyperion.workflow.engine.server.framework.WorkflowEngineServiceLocal.getUserFromCES(WorkflowEngineServiceLocal.java:536)
at com.hyperion.workflow.engine.server.framework.WorkflowEngineServiceLocal.systemSignOn(WorkflowEngineServiceLocal.java:341)
at com.hyperion.workflow.engine.server.framework.WorkflowEngineServiceLocal.signOn(WorkflowEngineServiceLocal.java:387)
at com.hyperion.workflow.engine.api.base.WorkflowEngine.signOn(WorkflowEngine.java:80)
at com.hyperion.workflow.engine.api.base.WorkflowEngine.trustedSignOn(WorkflowEngine.java:94)
at com.hyperion.workflow.engine.api.base.WorkflowEngine.trustedSignOn(WorkflowEngine.java:90)
at com.hyperion.workflow.agent.TaskReceiver.init(TaskReceiver.java:34)
at javax.servlet.GenericServlet.init(GenericServlet.java:211)
at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1105)
at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:932)
at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:3917)
at org.apache.catalina.core.StandardContext.start(StandardContext.java:4201)
at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:759)
at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:739)
at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:524)
at org.apache.catalina.startup.HostConfig.deployDirectory(HostConfig.java:904)
at org.apache.catalina.startup.HostConfig.deployDirectories(HostConfig.java:867)
at org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:474)
at org.apache.catalina.startup.HostConfig.start(HostConfig.java:1122)
at org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java:310)
at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:119)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1021)
at org.apache.catalina.core.StandardHost.start(StandardHost.java:718)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1013)
at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:442)
at org.apache.catalina.core.StandardService.start(StandardService.java:450)
at org.apache.catalina.core.StandardServer.start(StandardServer.java:709)
at org.apache.catalina.startup.Catalina.start(Catalina.java:551)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:294)
at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:432)
2012-07-24 18:39:41,907 [main] ERROR com.hyperion.workflow.engine.server.framework.WorkflowEngineServiceLocal.wfx(WorkflowEngineServiceLocal.java:2584) - Cannot signOn.
com.hyperion.workflow.engine.api.base.WfException: Cannot getUsers.null
at com.hyperion.workflow.engine.server.framework.WorkflowEngineServiceLocal.wfx(WorkflowEngineServiceLocal.java:2593)
at com.hyperion.workflow.engine.server.framework.WorkflowEngineServiceLocal.getUsers(WorkflowEngineServiceLocal.java:782)
at com.hyperion.workflow.engine.server.framework.WorkflowEngineServiceLocal.getUserFromCES(WorkflowEngineServiceLocal.java:536)
at com.hyperion.workflow.engine.server.framework.WorkflowEngineServiceLocal.systemSignOn(WorkflowEngineServiceLocal.java:341)
at com.hyperion.workflow.engine.server.framework.WorkflowEngineServiceLocal.signOn(WorkflowEngineServiceLocal.java:387)
at com.hyperion.workflow.engine.api.base.WorkflowEngine.signOn(WorkflowEngine.java:80)
at com.hyperion.workflow.engine.api.base.WorkflowEngine.trustedSignOn(WorkflowEngine.java:94)
at com.hyperion.workflow.engine.api.base.WorkflowEngine.trustedSignOn(WorkflowEngine.java:90)
at com.hyperion.workflow.agent.TaskReceiver.init(TaskReceiver.java:34)
at javax.servlet.GenericServlet.init(GenericServlet.java:211)
at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1105)
at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:932)
at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:3917)
at org.apache.catalina.core.StandardContext.start(StandardContext.java:4201)
at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:759)
at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:739)
at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:524)
at org.apache.catalina.startup.HostConfig.deployDirectory(HostConfig.java:904)
at org.apache.catalina.startup.HostConfig.deployDirectories(HostConfig.java:867)
at org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:474)
at org.apache.catalina.startup.HostConfig.start(HostConfig.java:1122)
at org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java:310)
at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:119)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1021)
at org.apache.catalina.core.StandardHost.start(StandardHost.java:718)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1013)
at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:442)
at org.apache.catalina.core.StandardService.start(StandardService.java:450)
at org.apache.catalina.core.StandardServer.start(StandardServer.java:709)
at org.apache.catalina.startup.Catalina.start(Catalina.java:551)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:294)
at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:432)
2012-07-24 18:39:41,908 [main] ERROR com.hyperion.workflow.agent.TaskReceiver.init(TaskReceiver.java:39) - Error Getting the workflowEngine Cannot signOn.Cannot getUsers.null -
DB CONNECT support Hyperion database(Essbase)
Hi,
Does DB CONNECT support Hyperion database(Essbase) for SAP BW 3.5/7.0.
Regards
CSM ReddyHi,
assuming that you talk about ABAP DB CONNECT, this is not the case. From ABAP, SAP supports at maximum secondary connections to databases that are also supported by SAP as SAP databases (Oracle, the three DB2s, MSSQL, MAXDB).
You also need to be aware that not every OS on your application server is able to connect to every database listed above. In case of SAP on iSeries, you need to have a Windows Appserver to be able to connect against most other databases supported by SAP.
For more details about ABAP multi-connect refer to SAP note 323151, or the iSeries note 445872.
However, the JAVA part of the WebAS provides means to open secondary connections against any database which support a JDBC driver. The BW UDI connector (which uses that ability) might also support the Hyperion database. I'm not familar with their plans.
Hope that helps.
Dorothea
Maybe you are looking for
-
How to remove Open/Save prompt when using Internet Explorer
Acrobat XI Pro was deployed with custom MST that had When using Internet Explorer prompt for Open/Save. Is there a hack that will disable this prompt without having to re-install Acrobat XI Pro?
-
How to create Hierarchy Variable
Hi, Can any one please tell me (step by step) how to craete Hierarchy Variable for Prod Hierarchy? Please do not give help.sap.com link..its very confusing and did not help me at all. Thanks
-
How to run the package programs in eclipse ?
hi all, how to run the package programs in eclipse ? plz clarify... regards balakrishna.m
-
Barcode export to PDF - Crystal Reports for Visual Studio 2005
Hi, we have a report that includes a barcode. We can print the report OK, but when we export to PDF the barcode is missing. Is there a work around for this? We have to have the PDF of the report for archive purposes. Thanks!
-
Thread 1 cannot allocate new log, sequence 108 All online logs needed archiving Current log# 1 seq# 107 mem# 0: