Procedure to create file system in AIX or HP-UX

hi gurus
i have to install SAP BI on one HP-UX server. unfortunately the OS admin is not available and i have to cretae file systems too.
can any one tell me how to create file systems in HP-UX which are required for SAP installation on Oracle. i know the all the directories required for the installation but i just wonder is it like just create directory like
/usr/sap/<SID> and mount on to any logical volume. or the procedure is different from what i am thinking
please help

thanks kishore.
such a genious . grt.

Similar Messages

Unable to create File System Repository manager

Hello,
I would like to create File System Repository manager to this path: I have mapped a certain Network drive "
main-uni-fs1\pictures$" to the Portal Machine and under this machine it appears as drive "N:\", inside it there is a picture folder which I would like to create the mapping to. I tried setting the "Root Directory" value to "N:\" and to "
main-uni-fs1\pictures$" but I keep receiving an error message at the Repository Component Monitor (see below).
10X,
Roy

Hello Roy,
1> Create a new path that points to the pictures directory on the system. Enter the path lik
mypc.myorg.com\pictures
Under Sys admin -> Sys Config -> KM -> Content MGT -> Global Services -> Network path
Under the user name and password, enter your username and password
username whould be entered like domainname\username
2>Then create a system in for the mypc.myorg.com server under
Sys admin -> Sys Config -> KM -> Content MGT -> Global Services -> System landscape definitions -> System -> Windows Sytem.
(Assuming u are acessing a windows sytem from a portal running on windows platform).
You need to enter system id and description . Kindly remember the system id, since it would be useful in two places while usermapping and creating the file system repository.
3>create a file system rep mgr under
Sys admin -> Sys Config -> KM -> Content MGT -> Repository Managers > File System Repository
Following properties are most important.
Name , ACL manager cache, Security manager(which you would have to set to W2kSecurity manager)
prefix(this is the folder name that you will identify your repository with) Widws landscape System (this is the sytem id of step 2) and root directory (network path of first step only in this case enter it like this //mypc.myorg.com/pictures)
4>Then under user mapping section, you will find you system (the system id of second step) , enter your name as password.
Initially when you configure your rep manager, you dont need to start ur servlet engine. If you modify any property then you need to re start ur servlet engine.
These are the steps for creating repository
If this still does not get resolved. Then kindly read the limitations of creating the file system repository manager in the link that I had posted in my earlier post.
Thanks and Regards
Pradeep Bhojak

Unable to create File System Repository using Network Path

Hi All,
I am trying to create a File System Repository.
I created a networkpath and windows system and used the same while creating File Repository according to the steps in help.
With out using Networkpath(i.e.,If I use IP address,I am able to create File System Repository).
But with the network path,it throws the following error as seen in Component Monitor.
<b>Startup Error: The localroot does not exist: C:\usr\sap\IGTE\j2ee\j2ee_00\cluster\server\NWP_001
My network path is NWP_001
</b>
Did any one face this problem?
Any help please........
Rgds,
Santhosh

Hi,
I am getting the same error even if I replace(\) by slashes(/).
I tried on EP6SP12 as well as EP6SP2 and got the same error on both.
The repository is searching for a folder named with
n/w path on the portal server itself(i.e, it is searching in the following folder
<b>C:\usr\sap\IGTE\j2ee\j2ee_00\cluster\server\NWP_001
My network path is NWP_001</b>),instead of searching on the remote system.
Can any one help me in solving the problem
Thanks in Advance.
Rgds,
Santhosh

Creating File System in SOLARIS

Hi Everyone,
We installed SOLARIS in SunFire server. There are 3 hard disks, namely, 0, 1 and 2. Default is zero. We formatted the disk 1 and 2 and now we're having problem creating a file system. Every time we log in to the server we automatically go to disk zero (0), which is the default. How can we create file system in disk 1 and 2?
We'll appreciate your answers. thank you.
Regards,
Eco

> We installed SOLARIS in SunFire server. There are 3 hard disks, namely, 0, 1 and 2. Default is zero. We formatted the disk 1 and 2 and now we're having problem creating a file system. Every time we log in to the server we automatically go to disk zero (0), which is the default. How can we create file system in disk 1 and 2?
newfs?
I'm not sure what you mean with "we automatically go to disk zero..".
> We'll appreciate your answers. thank you.
I suggest you take a Solaris class; no offense but if you have no clue how to administer your operating system running a SAP installation on top can be very tedious.
Markus
Edited by: Markus Doehr on Sep 16, 2009 11:16 AM

How to create file system datagrid in flex web application

how to create file system datagrid in flex web application

Hi,
Check this out:
http://shigeru-nakagaki.com/flex_samples/FileReference/FileUploadExample2/FileUploadExampl e2.html
Johnny
Please rate answer.

Creating File System Repository for a remote system

Hi Experts,
My requirement is that I need to create a KM repository in EP from where I need to upload documents into the BW system. Is File System Repository the right type of repository which I need to create for this purpose?
If yes, then in what format do I have to specify the value of the Root Directory property of the repository? I have a folder /data/docs created in the BW system within which I want to upload documents using this repository. But since this folder is located on the BW system which is a remote system for EP, I am not sure how I have to enter the path to this folder.
Can anyone give me any hints on this?
Warm Regards,
Saurabh

Hello Saurabh,
I don't think an FS repository is what you are looking for in this scenario, you could instead use a BI Repository Manager, for more information see:
http://help.sap.com/saphelp_nw70/helpdata/en/43/c1475079642ec5e10000000a11466f/frameset.htm
Kind regards,
Lorcan.

Unable to see created File System Repository

Hi,
I have created a File System Repository following the link below:
http://help.sap.com/saphelp_nw04s/helpdata/en/e3/92322ab24e11d5993800508b6b8b11/frameset.htm
I am not able to do user mapping by going in personalize as I can found my windows System there.
Do I have to create a new system mwhere else.
BTW, I am mapping to a remote window system with the KM.
Please give useful suggestions.
Points given for problem solving answers.
Sumit

Hi,
Example configuration of a WINDOWS® file system repository manager given in the Help.sap.com.
Creating System:
http://help.sap.com/saphelp_nw04s/helpdata/en/e3/92322ab24e11d5993800508b6b8b11/frameset.htm
Specifying User Mapping:
http://help.sap.com/saphelp_nw04s/helpdata/en/e3/92322ab24e11d5993800508b6b8b11/frameset.htm
Senthil K.

Backing up packages/procedures/functions to File system

My boss would like me to copy all of my database code to the file system every week or so. I was wondering if there was an SQL script out there that would magically do this.
If not than I would be curious to know if people still do back up their code to the file system and how else it could be done.

If not than I would be curious to know if people still do back up their code to the file systemWe have a source code repository where code can be checked out, checked in and compiled to the database.
The code in the database gets backed up with the rest of the database. There's no need for a separate dump to files.
It's possible that the source repository can be out of sync with what's in the database (it happened to us a few times), but then the code in the database (in all_source) is the most current not whatever happens to be in an old file dump.

Create file system directory, no oracle directory

I want to create a directory in the filesystem, example / test / directory1,
I want to create a directory tree example:
/ test / directory1
/ test / dir2
/ test / dir2 / folder
as if a linux mkdir.
Is it possible with sql?
thanks
Greetings

i need Java (jserver) installed in oracle no?,
for load in the database, with this:
declare
f file_type;
fz file_type;
r number;
begin
-- get a handle for the "tmp" directory
f:=file_pkg.get_file('/tmp');
-- create a new temporary directory where the zip archive is being
-- extracted into ... make the filename unique using TIMESTAMP
fz := f.create_dir(+
'zipdir_temp_'||user||'_'||to_char(systimestamp, 'YYYYMMDD_HH24MISS.SSSS')
-- DOIT:
-- extract the zipfile; the -qq switch is very important here - otherwise
-- the OS process will not come back
r := os_command.exec('unzip -o -qq [PATH/TO/ZIPFILE] -d '||fz.file_path);
-- if the result is 0 (=success) load the contents of the temporary directory
-- (recursively) with ONE (!) SQL INSERT command
if r = 0 then
insert into document_table (
select
seq_documents.nextval id,
e.file_path,
e.file_name,
file_pkg.get_file(e.file_path).get_content_as_clob('iso-8859-1') content
from table(file_pkg.get_recursive_file_list(fz)) e
end if;
-- finally delete the temporary directory and its contents
fz := fz.delete_recursive();
end;
sho err
and how install jserver??
Edited by: rafa298 on 05-may-2011 2:22

Help Library on Aix file system

Dear Experts,
Users in my company are using SAP GUI for windows as a front end tool to access the SAP Application
My Application is runinig on AIX, I was configuerd the Help files on windows machine " i shared directory on this machine for every one , i put the help files there, from SR13 i put the path ,and it was working fine"
but now i want to move this HELP directory to the AIX file system, i don't know how to make this file system accessed by the SAPGUI
Could you please help me on how can i use one file system on AIX as shared folder containig the HELP files and can be accessed by the windows SAPGUI?
Thanks
Sherif

Hello Sherif,
Please go to transaction FILE. There you will file an entry for NETSCAPE_PATH. This is the path you need to give in SR13. Actually this is a logical path which has to be mapped with the physical file path which will be nothing but the location of your online help files. The mapping will be done in FILE itself.
Next you need to make settings in SR13 and give this path.
Addtionally check :
http://www.jt77.com/human2/resources-13782.html
Also the OSS note 101481
Regards.
Ruchit.

AIX file system

Hi,
What command would be used to check the type of the file system on AIX?
Thx,
Edited by: nemohm on Jan 6, 2009 11:25 AM

Check this on aix or unix forum.
http://www.ibm.com/developerworks/forums/forum.jspa?forumID=747
or
http://www.unix.com/
-Arun

Lucreate - Cannot make file systems for boot environment

Hello!
I'm trying to use LiveUpgrade to upgrade one "my" Sparc servers from Solaris 10 U5 to Solaris 10 U6. To do that, I first installed the patches listed on [Infodoc 72099|http://sunsolve.sun.com/search/document.do?assetkey=1-9-72099-1] and then installed SUNWlucfg, SUNWlur and SUNWluufrom the S10U6 sparc DVD iso. I then did:
--($ ~)-- time sudo env LC_ALL=C LANG=C PATH=/usr/bin:/bin:/sbin:/usr/sbin:$PATH lucreate -n S10U6_20081207 -m /:/dev/md/dsk/d200:ufs
Discovering physical storage devices
Discovering logical storage devices
Cross referencing storage devices with boot environment configurations
Determining types of file systems supported
Validating file system requests
Preparing logical storage devices
Preparing physical storage devices
Configuring physical storage devices
Configuring logical storage devices
Analyzing system configuration.
Comparing source boot environment <d100> file systems with the file
system(s) you specified for the new boot environment. Determining which
file systems should be in the new boot environment.
Updating boot environment description database on all BEs.
Searching /dev for possible boot environment filesystem devices
Updating system configuration files.
The device </dev/dsk/c1t1d0s0> is not a root device for any boot environment; cannot get BE ID.
Creating configuration for boot environment <S10U6_20081207>.
Source boot environment is <d100>.
Creating boot environment <S10U6_20081207>.
Creating file systems on boot environment <S10U6_20081207>.
Creating <ufs> file system for </> in zone <global> on </dev/md/dsk/d200>.
Mounting file systems for boot environment <S10U6_20081207>.
Calculating required sizes of file systems              for boot environment <S10U6_20081207>.
ERROR: Cannot make file systems for boot environment <S10U6_20081207>.So the problem is:
ERROR: Cannot make file systems for boot environment <S10U6_20081207>.
Well - why's that?
I can do a "newfs /dev/md/dsk/d200" just fine.
When I try to remove the incomplete S10U6_20081207 BE, I get yet another error :(
/bin/nawk: can't open file /etc/lu/ICF.2
Quellcodezeilennummer 1
Boot environment <S10U6_20081207> deleted.I get this error consistently (I ran the lucreate many times now).
lucreate used to work fine, "once upon a time", when I brought the system from S10U4 to S10U5.
Would anyone maybe have an idea about what's broken there?
--($ ~)-- LC_ALL=C metastat
d200: Mirror
    Submirror 0: d20
      State: Okay
    Pass: 1
    Read option: roundrobin (default)
    Write option: parallel (default)
    Size: 31458321 blocks (15 GB)
d20: Submirror of d200
    State: Okay
    Size: 31458321 blocks (15 GB)
    Stripe 0:
        Device     Start Block Dbase        State Reloc Hot Spare
        c1t1d0s0          0     No            Okay   Yes
d100: Mirror
    Submirror 0: d10
      State: Okay
    Pass: 1
    Read option: roundrobin (default)
    Write option: parallel (default)
    Size: 31458321 blocks (15 GB)
d10: Submirror of d100
    State: Okay
    Size: 31458321 blocks (15 GB)
    Stripe 0:
        Device     Start Block Dbase        State Reloc Hot Spare
        c1t0d0s0          0     No            Okay   Yes
d201: Mirror
    Submirror 0: d21
      State: Okay
    Submirror 1: d11
      State: Okay
    Pass: 1
    Read option: roundrobin (default)
    Write option: parallel (default)
    Size: 2097414 blocks (1.0 GB)
d21: Submirror of d201
    State: Okay
    Size: 2097414 blocks (1.0 GB)
    Stripe 0:
        Device     Start Block Dbase        State Reloc Hot Spare
        c1t1d0s1          0     No            Okay   Yes
d11: Submirror of d201
    State: Okay
    Size: 2097414 blocks (1.0 GB)
    Stripe 0:
        Device     Start Block Dbase        State Reloc Hot Spare
        c1t0d0s1          0     No            Okay   Yes
hsp001: is empty
Device Relocation Information:
Device   Reloc Device ID
c1t1d0   Yes    id1,sd@THITACHI_DK32EJ-36NC_____434N5641
c1t0d0   Yes    id1,sd@SSEAGATE_ST336607LSUN36G_3JA659W600007412LQFN
--($ ~)-- /bin/df -k | grep md
/dev/md/dsk/d100     15490539 10772770 4562864    71%    /Thanks,
Michael

Hello.
(sys01)root# devfsadm -Cv
(sys01)root# To be on the safe side, I even rebooted after having run devfsadm.
--($ ~)-- sudo env LC_ALL=C LANG=C lustatus
Boot Environment           Is       Active Active    Can    Copy
Name                       Complete Now    On Reboot Delete Status
d100                       yes      yes    yes       no     -
--($ ~)-- sudo env LC_ALL=C LANG=C lufslist d100
               boot environment name: d100
               This boot environment is currently active.
               This boot environment will be active on next system boot.
Filesystem              fstype    device size Mounted on          Mount Options
/dev/md/dsk/d100        ufs       16106660352 /                   logging
/dev/md/dsk/d201        swap       1073875968 -                   -In the rebooted system, I re-did the original lucreate:
<code>--($ ~)-- time sudo env LC_ALL=C LANG=C PATH=/usr/bin:/bin:/sbin:/usr/sbin:$PATH lucreate -n S10U6_20081207 -m /:/dev/md/dsk/d200:ufs</code>
Copying.
*{color:#ff0000}Excellent! It now works!{color}*
Thanks a lot,
Michael

Create source system in BW3.5

Hi all
can anybody tell me the procedure for creating source system in BW3.5 using automatic method at this time i create and assign logical system in both BW and R3 system and create Background users in BW system now my confusions are
1 Is this nessory that i create a diffrent user which is not dialog user in BW or R3 and
2 Thing is this nessorry that no pre created RFC connection present in R3
thx

hi,
i m listing down the steps with brief description, check if you r going that way.
1.you have same background user in BW and R/3 with proper autho.
2.you created new source system in RSA13, selecting first option of automatic creation.
3.you fill in all details correctly in popup window "Create R/3 Source System", that comes up.
4.pressing ok, it will ask you to log in as admin in target system. Before loggin in check client no, it may be diff e.g. 000, then change it to yr system client no.
5.next it will give you RFC destinations screen. goto tab "Logon/Security", give password for the user thr. save the changes.
6.you can check the connection by clicking "Test Connection" and try also "Remote Logon". If your password is correct, then it will log you in the system.
7.now everything is setup, so comeback. It will ask you to replicate/activate datasources from the source sytem. Click "Replicate as Well".
pls mark question answered, if you have no further doubts
Now it is finished.
Hope it helps.
Regards,
Purvang

File System Repository - User Mapping not Working

Hi,
I tried to integrate a file system into KM. For doing so, I followed the guide located at [http://help.sap.com/saphelp_nw04/helpdata/en/ed/b334ea02a2704388d1d2fc3e4298ad/frameset.htm|http://help.sap.com/saphelp_nw04/helpdata/en/ed/b334ea02a2704388d1d2fc3e4298ad/frameset.htm].
The only problem is, tht the user mapping doesn't seem to work...
The portal is running on a UNIX system, whereas the file share to be integrated is running on a Windows 2003 Server.
Here are the single steps that I performed:
- Creation of a KM Windows System in the system landscape directory with the ID "MySystem". User Mapping is set to "User,Admin"
- Creation of a Windows System in the system landscpe of the KM with the ID "MySystem"
- Creation of a Network Path in KM with following settings:
jCIFS Protocol is activated; Network Path = "
My Server\My Share"; User = "My Windows Domain\My User" and the according password. The specified user has administration permissions on the server.
- Creation of a readonly File System Repository Manager with following settings:
Root-Directory = "
My Server\My Share", SecurityManager = W2kSecurityManager, ACL Manager Cache = ca_rsrc_acl, Windows Landscape System = "MySystem"
- Configuration of the W2KSecurityManager: I specified the DomainFile-setting as "/etc/companydomaincontrollers.txt"
and placed such a file in the KM with following setting: "My.Server.Domain=According IP Adress"
- In UME I carried out user mapping for index_service user and placed the above mentioned admin user into the user mapping.
Result: The indexing works fine, all fles are indexed. When I however try to carry out a user mapping for a "normal" portal user in the UME it doesn't work: The portal user has no access to the file system. (I used the same admin user for mapping... so it should work).
Any help is appreciated...
P.S. With portal super admin users I can however access the fle system repository, even without user mapping. But I think this is ok, because I read in one forum message that admin users have always access in general....

>
Frank Friedrich wrote:
> Hi Clemens,
>
> so the good think is that indexing is working and you can navigate with your admin portal user through the file system repository. In this case the most configuration settings must be correct.
>
> I am not quite sure regarding your System objects with the ID "MySystem". Do you have as well define an Alias Name for this System Object with the same name "MySystem" ? As well upper and lower letters are important.
>
> Because the reference is all the time the Alias name and not the ID or Name of your System object.
>
> Best regards
> Frank
Hi Frank,
thanks for your reply.
I have as well definied an Alias Name with exactly the same id. So this gives us following:
System landscape directory: KM Windows System with id="MySystem" and Alias="MySystem"
KM System Landscape: Windows System with id="MySystem"
In the created file system repository manager I also set "MySystem" for the Windows Landscape System parameter.
So I think that this should be correct (I also considered upper- and lowercase letters).
Maybe the probem lies in specifying the domain names? When I applied user mapping I always additionally specified the Windows domain name of the users, which is correct I think.
In the security manager configuration for the domain controllers (-> [http://help.sap.com/saphelp_nw04s/helpdata/en/a9/c54e9e09448d46b73d154e93d5e995/content.htm]) I however mapped the network domain of the file share server to the according IP adress. Maybe this is wrong?

Error in page which is using file system DC as source of data .

Hi All,
I have created file system connection using create content repository connection .
I have exposed this file system as a data control.
Form this data control i have creatd a jspx page by dragging and dropping .
I am getting following exceptions while trying to run this page .
Starting WLS with line:
<Exception>
java.lang.NoClassDefFoundError: and
Caused by: java.lang.ClassNotFoundException: and
     at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
     at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:252)
     at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:320)
Could not find the main class: and. Program will exit.
Exception in thread "main" Process exited.
</Exception>
please help me to get this issue resolved .
Thanks,
Arun.

From your stack trace, it sounds like you are trying to run a Java class and it has no main() i.e. public static void main(String args[]). Maybe check that you've actually created a Fusion application and there's a Web Content directory or faces servlet present? (I'm guessing here) Running the .jspx without the context will probably just give you that error message because there's no main().
Cappa

Procedure to create file system in AIX or HP-UX

Similar Messages

Maybe you are looking for