Procedure to know No of delta records

Hi All,
There were some changes done in CRMPRD for the DS:Business datasource.
So we want to compare the changes is DELTA records in CRM loaded to BI server.
Now,
Is there any way to know the no. of delta records in the R/3 production(here CRM) for partiular dates.
For eg: business partner delta records in CRM production.

Hi,
You can try in RSA3 by giving this data source, select delta upload and in the field selections tab give the dates and run it, here you can get the no.of records extracted for that data source on that day.

Similar Messages

  • Delta Records

    Hi All,
    We have a delta load, by mistakenly we have deleted the delta request and we have delete the backupdata also(PSA request)There are apporximatly 12000 records.
    Is there any way to get back these delta records......i know the only way to do full load.
    but still i want to know is there any way at r/3 side to know daily wise delta records....
    This DS belogs to HR application.
    please suggest.

    Hi,
    Dont you have the request in the reconstruction tab of the cube?YOu will if you are using 3.X flow.
    If yes then reconstruct it...
    or else follow Sreekanth's advice.
    You will see the request in RSMO under deleted requests.
    Regards,
    Mansi
    Edited by: mansi dandavate on May 20, 2009 11:55 AM

  • Impact of Delta Records on Key Figure Summation in DSO

    Hi experts,
    I have a key figure with aggregation type "summation" in a DSO. I would like to know the impact of delta records on the key figure.
    E.g.
    source DSO
    doc_id (key) | doc_pos | type | amount
    4711 | 1 | A | 100 USD
    4711 | 2 | B | 20 USD
    target DSO
    doc_id (key) | amount
    4711 | 120 USD
    If the first record is modified ("type" from A to C) as follows and delta-loaded to target DSO:
    4711 | 1 | C | 100 USD
    This will lead to incorrect amount:
    target DSO
    doc_id (key) | amount
    4711 | 220 USD
    How can I handle this situation?
    Thanks in advance.
    Regards,
    Meng

    Hi..
    I believe one document number and document Item will have only one type.
    Like 4711      1    should have only one type ( A / B / C).
    If the above assumption is true then just remove Doc Type from Key field of source DSO.
    Then From Source to Target Change Log table can handle this.
    Regards
    Anindya

  • I want to know the No of records in various stages

    Kindly explain brief about these three questions in bi
    1.How and where can i know the number of records in a day/delta and how/where can i found the missing records of delta?
    2.where can i found the number of delta records in ecc as well as bi?
    3.Suppose 1 month back my project done full upload from the day onwards i am getting day to day transactions through delta now i would like to know the total no of records (full and all deltas) where can i found in ecc side as well as in bi side?

    Hi ,
    For all delta and full DTP loads you can get  information in table  RSICCONT .Check table  RSMONICDP  this will give you detail information .Here you will get all the information with timestamp and request id .
    Hope these tables will serve your purpose .
    Regards,
    Jaya

  • Loading Last three days of delta records in Production Server

    Hi
    I have a Process Chain in BI-Production Server which runs dailiy  and loads the delta records dailiy  . I have 'Custom DataSource' which loads the data from QM-Tables .
    My Process Chain is failied due to the "Caller 09 Error for the datasource". So now i transported that datasource from R/3-Dev To R/3-Production and replicated into BI-Production Server .
    So how can i load the delta records of last three days . I mean , how can i scehdule the last three days of delta updated records .
    pls let me  know
    regards
    Kumar

    Remove the failed request. Repeat the delta. This will upload previous failed request
    Repeat the delta again with infopackage selection for 3 days

  • To know about the delta fields in VBPA

    Hi,
    Does anyone know how to get delta records for VBPA since it doesn't have date and and time fields.
    Thanks,
    GK

    Hi carsten,
    i got your point.But i need to run the delta loads every 8 hours from ECC to BI. do u have any document to set deltas using these tables. im confused how to capture deltas..
    any help appreciated.
    Thanks,
    GK

  • Reg-Flow of delta records

    Hi gurus,
    Any one please explain the flow of delta records from r/3 to bw.I mean flow of records from *base tables(eg VBAK,VBAP) till BW.*
    Thanks.

    Hi,
    There is no specific list, it depends completely on the condition types that have been configured in your system.
    The answer you were given was a good one and gave you as much detail as you could expect.
    If you are having a particular problem or issue then let us know and we will do all that we can to help.
    The easiest way to find out the "list" is to simply click on the "possible entries" tab at the right of the field. !!!!!!!!!!!
    Steve B

  • Delivery Delta Records missing

    Hi Friends !
    We have missd the delta records for 4 days. Only way I know to run the setup table again & get all the records till date. Then schedule V3 jobs & next day onwards delta records will be pulled. Do we have any other way to get those missed records? Please advise.
    With Regards
    Rekha

    Hi Rekha,
    Please follow the below steps in R3 side
    goto RSA3-->give DS name press enter
    below you will get selection screen
    give you delivery numbers as selections
    then execute, if you get records here then definitely you should get records when you run the IP.
    Hope this helps
    Regards,
    Venkatesh.

  • Re Delta records

    Hi All,
    We are loading data ecc to bw system (datasource to cube) and by mistake last two request(2days) got deleted even in PSA data is not available,
    So can any one  help me out to get last few days delta records,
    Is any process/tcode to recover delta request...
    Regards,
    Stanzal

    Hi  Lucy
    Check this below thread.
    Re: Job is runnning after failed job in PSA
    ..and its not possible to give exact suggestion until and unless we know DataSource name.
    Delta mechanism varies with DataSource
    Regards
    Anindya

  • OBI Applications with EBS - Delta records ?

    Hello,
    I wonder if OBI Apps with EBS does capture the delta/changed records for loading them into the OBAW ? In other words, I understand that there is a full load at the beginning and then there would be just delta loads for the changed records. I just dont know if there is support for capturing the changed records.
    Txs. for any help.
    Antonio

    Hi,
    Actually, I am trying to figure out if OBI Apps with EBS has the support for loading delta records only (after a full load).
    I know for a fact that OBI Apps with Siebel that is the way it works but I am not sure if with EBS is the same way...
    Txs. for any help
    Antonio

  • No.of transferred records do not match with delta records in RSA7

    Hi,
    The full update was failing since a number of days in 0vendor because of error in the source system. So I did an initialize with data transfer and corrected the PSA data and updated it using scheduler in the infoobject. In this case the number of transferred records was 24300 and added records was 0.Next I executed the delta infopackage and was expecting 0 records,since there were 0 records in rsa7. But I got 16000 records.Can you explain me why this happened?
    Regards,
    Shalaka

    Hi Shalaka,
    In which version of SAP you are working?
    You might want to have a look at the table BDCP2 which is a different table that handles the delta mechanism for the change pointers.
    You can reset the processing status using the program RSA1BDCP ex with following entries.
    Now, coming to your issue - to verify the initial loads I am listing some basic checks(step by step).
    You can give it a try in Dev/QAS if you have any restrictions in Prod.
    1. Check and verify if the RSA7 delta queue is present.
    2. In BW system, delete the INITIALIZATION request from infopackage - This should delete the delta queue from RSA7 in ECC system. (I am not 100% sure about this so try this once)
    3. Re-initialize the datasource from BW system and note the no. of incoming records in BW. This should match with LFA1 entries.
    4. Check the delta queue in RSA7 - There should be a new delta queue created
    5. Start the Delta load - The should not be any records coming in to BW
    6. Check the entries in table BDCP2 and its process indicator.
    7. Create a new vendor from XK01 and check the entry again in BDCP2 table.
    8. Run the delta again in BW and this time delta should have the newly created vendor.
    Also be aware that since its a master data datasource and deals with change pointers you will not see any entries in RSA7.
    A possible reason I could think of you getting 16000 records in delta is because you might have initialize the datasource is past and then started the FULL loads. So the deltas actually started accumulated in BDCP2 with processing status as BLANK and then when you triggered delta again back now all the historical deltas are processed.
    This apply with BDCPV too if you are on older version of SAP.
    Did you tried running delta's multiple times - you should not face any delta records when the processing status of change pointers is set to 'Processed' i.e. 'X'.
    PS: You can find the message type for 0VENDOR_ATTR in ROOSGEN table. This will be useful in looking at table BDCP2.
    Please let me know if there are any questions.
    Thanks
    Amit

  • Mechanism to bring back delta records

    Hi,
    We have got all delta datasources, during last month-end, we found some delta records are missing. What could be the best approach to bring back those missed records. but those records are huge.
    What is the best solution? Is Re-initialization with out data transfer? or full load for those dates by undeleting the current requests after those dates?
    Thanks in Advance,
    Suman

    Hi ,
          You can delete the setup table and re-fill it , then If you know the document numbers of those records or creation date , etc , you can give those in the selection and load the repair full load for those missed records.
    If the V3 job is active then it will fill the delta queue with the recent data , so that the previous delta cannot be pulled.
    regards,
    karthik.

  • Do any one willlet me know abt Safety Delta

    Hi All
    Do anyone let me know abt Safety Delta?What exactly it does I need concept of safety delta.How do it will be usefull and in which scenarios do we use this?
    Pls let meknow
    Regards
    Balji

    Hi,
    Safety delta for extraction from the CO-PA for the extraction out of the profitability analysis, a so-called 'Safety delta' is used for a half an hour during the initialization and delta upload. This means that only records that are already a half an hour old at the starting point of the upload are loaded into BW. You want to reduce this delta in order to have more current data available in the reporting.
    check this...
    Reagrading Safety delta

  • Delta Records is not getting updated in delta queus when changes done

    Hi All,
    In Quality system , when a user makes a change to an order's ship-to address, the changes are "triggering" a delta record into the delta tables for BI to extract. This can be seen via tcode rsa3's delta tester.
    In Productionn System, when the user makes the exact same change, nothing is added to the delta table and the changes never come over to BI unless a full extract is request for the order.
    Why changes not getting updated, please give your inputs.
    Thanks & Regards,
    Venkat Vanarasi.

    Do you have your V3 update job active and running? THis job wites changes to the delta queue. Of course your datasource has to been initialized and a delta queue should be setup. You can check it in RSA7.
    Regards,
    Juergen

  • Delta records not updating from DSO to CUBE in BI 7

    Hi Experts,
    Delta records not updating from DSO to CUBE
    in DSO keyfigure value showing '0' but in CUBE same record showing '-I '
    I cheked in Change log table in DSO its have 5 records
    ODSR_4LKIX7QHZX0VQB9IDR9MVQ65M -  -1
    ODSR_4LKIX7QHZX0VQB9IDR9MVQ65M -   0
    ODSR_4LIF02ZV32F1M85DXHUCSH0DL -   0
    ODSR_4LIF02ZV32F1M85DXHUCSH0DL -   1
    ODSR_4LH8CXKUJPW2JDS0LC775N4MH -   0
    but active data table have one record - 0
    how to corrcct the delta load??
    Regards,
    Jai

    Hi,
    I think initially the value was 0 (ODSR_4LH8CXKUJPW2JDS0LC775N4MH - 0, new image in changelog) and this got loaded to the cube.
    Then the value got changed to 1 (ODSR_4LIF02ZV32F1M85DXHUCSH0DL - 0, before image & ODSR_4LIF02ZV32F1M85DXHUCSH0DL - 1, after image). Now this record updates the cube with value 1. The cube has 2 records, one with 0 value and the other with 1.
    The value got changed again to 0 (ODSR_4LKIX7QHZX0VQB9IDR9MVQ65M - (-1), before image &
    ODSR_4LKIX7QHZX0VQB9IDR9MVQ65M - 0, after image). Now these records get aggregated and update the cube with (-1).
    The cube has 3 records, with 0, 1 and -1 values....the effective total is 0 which is correct.
    Is this not what you see in the cube? were the earlier req deleted from the cube?

Maybe you are looking for

  • Follow sprite when the mouse is down, but randomly move when mouse is up?

    I have a sprite that has a Random Movement behavior. While the mouse is down, I want it to stop this behavior and initialize a Follow Sprite behavior instead. When the mouse is lifted, I want to stop the Follow Sprite behavior and reset/restart the R

  • Flash preview freezes

    Greetings All.  I'm using a 64-bit windows 7 machine. This problem just crept up within the past 2 weeks.  I've tried uninstalling and reinstalling flash to no avail.  The problem is the same in both Firefox and IE9. Anyway, let's say I have multiple

  • Output Type for Deleting Delivery Notes completely

    Hello, I've a problem that in case of complete deletion of a delivery note I want to get message of deletion via IDOC DELVRY05. Normally the complete document will be deleted without any outbut determination. Where do I have to implement this? Is it

  • Not recognizing my speech Siri or text

    Almost as if the mic is not working, I checked many places online and reset and changed my settings in general no matter what it seems not to recognize any sounds

  • Get data from array in Number format

    Ive got this array with numbers in it, which i want to use for some simple calculations, but i keep getting the message that the array data isnt a number: The whole is in a for loop, with teller1 as increasing value. the code: var xco:Array = [180,23