Process and Forms Isuue

Hi All,
Before i mention about the issue i am facing i would like to brief about my process. In HCM process and forms i have a form where user1 will modify the position and submit it. user2  will approve the request, which updates the records in back end.
I observe that when user2 tries to change any drop down content a round trip is triggered and will not able to proceed further,but these functions are working fine with user1. However, user2 is able to proceed  without making any change, but again same problem is occurring when he clicks on SEND button.
When i try to set a break point in the class CL_IM_HRASR00ISR and when i click on  'CHECK and SEND'  button the debugger stops at the breakpoint , but when i click on 'SEND'  button debugger fails to stop .
And wanted to mention that this is happening only in QA system and it is working absolutely fine in DEV.
I appreciate help on this.
Thank You,
Vijetha.

You mean spinning wheel is going on. A blog has been written on this.
Check if this helps.
/people/christopher.solomon/blog/2009/06/18/hcm-processes-forms-you-spin-me-right-round-baby-right-round-like-a-record-baby-right-round-round-round
Thanks,
Aravind

Similar Messages

  • Isuue in HCM Process and Forms

    Hi All,
    Before i mention about the issue i am facing i would like to  brief about my process.  In HCM process and forms i have a form where HRPB will modify the position and submit it. CDT will approve the request, which updates the records in back end.
    The whole process i mentioned above was working fine till we upgraded EHP5. But now after the upgrade, i see that when CDT clicks on the send button it does not proceed further. I can see a loading symbol all the time. I even tried setting  break points in the class CL_HRASR00_DISPATCHER, which is not getting called. I don't find the process running in SM50 as well.
    And wanted to mention that this is happening only in QA system  and it is working absolutely fine in DEV. I am sure about all the transports.
    I  appreciate  help on this.
    Thank You,
    Vijetha.

    Hi Paramasivan Krishnan,
    First,  welcome you to SCN forum. However, I am afraid you posted on a wrong forum. Here is dedicate to SAP Business One. Not related to HCM.
    Thanks,
    Gordon

  • Design Time for Processes and Forms

    Hi experts,
    When trying to open  "Design Time for Processes and Forms" in order to create a process, I get a dump.
    Could you let me know what could be wrong ? config? etc..
    Hereunder is a sample of what I found in T.code ST22
    The following checkpoint group was used: "No checkpoint group specified"
    If in the ASSERT statement the addition FIELDS was used, you can find
    the content of the first 8 specified fields in the following overview:
    " (not used) "
    " (not used) "
    " (not used) "
    " (not used) "
    " (not used) "
    " (not used) "
    " (not used) "
    " (not used) "
        referenced node must exist
          READ TABLE object_hierarchy_nodes TRANSPORTING NO FIELDS
                     WITH KEY node_id = object_hierarchy_node_wa-ref_node_id
    >>>      ASSERT sy-subrc = 0.
        ENDIF.
      provider has to be specified (except in case of recursion)
        IF object_hierarchy_node_wa-ref_node_id IS INITIAL.
          ASSERT object_hierarchy_node_wa-provider_id IS NOT INITIAL.
        ENDIF.
    Thanks in advance,
    Louis

    note: Note 1075650
    Re: Assertion_Failed dump when accessing Design Time for Processes & Forms EP3
    regards,
    Prakesh.

  • HCM Processes and Forms: Work Item is not opening

    Hi,
    We are implementaing HCM processes and forms using NWBC (EHP7 - HR Renewal 2.0 FP1) and after using configuration of POWL inbox for MSS and HR Admin, We are not able to launch the Work Item.
    1) In MSS Work Book, while launching, we are getting message  -
    Failed to resolve Object Based Navigation target ".MSS_WL.NAVIGATE_FORM_WD". Use transaction PFCG to define this OBN target in a role or contact your system administrator to assign a role with the relevant OBN entries to your user.
    2) For HR Admin, we are getting message - Work Item can only be open using Portal and UWL. and it is displaying back end transaction SWNWIEX.
    Detail configuration steps are shown as below -
    Workflow Task used in configurations -
    1) Entries in IBO_C_WF_TA_P_SC  (Assign Task ID’s to POWL Types)
    2) IBO_C_WF_ACC configuration - (Define Tasks and Actions)
    3) IBO_C_WF_APC configuration (Provide Details of navigation parameters)
    4) IBO_V_WF_TTAC (Assignment of Actions to the Tasks)
    5) IBO_C_WF_TAC (Specify Default Action)
    Error -
    1) MSS -
    2)HR Admin -

    Hi Guru,
    Any input..its urgent!.
    Regards,
    Vijay

  • Dump while Executing Hrast_dT (Design time of HCM Process and Forms)

    Hi All,
    I am getting Syntax Error Dump while Executing Hrast_dT tcode (Design time of HCM Process and Forms) and here with i have mentioned the source code also ist contained in standard class.
    *METHOD constructor.
      DATA:
        badi_context          TYPE REF TO lcl_badi_context.
      CALL METHOD super->constructor
        EXPORTING
          form_scenario         = form_scenario
          form_scenario_service = form_scenario_service.
      DATA:
        t5asrfscnsrv_wa TYPE t5asrfscnsrv.
      SELECT SINGLE * FROM t5asrfscnsrv INTO t5asrfscnsrv_wa WHERE form_scen_srv EQ form_scenari
      ASSERT sy-subrc EQ 0.
      ASSERT t5asrfscnsrv_wa-service_type = 'GENSRV'.
      fill_table_metadata( ).*
    i followed this link also..its not working for me..
    [Re: Assertion_Failed dump when accessing Design Time for Processes & Forms EP3]
    Regards,
    Parthi

    Hello Parthasarathi,
    Please, try to implement the note 1075650.

  • Error in MSS HCM Processes and Forms Overview

    Hi all,
    Currently we are working on ESS/MSS from NW 7.3 portal.
    When i open HCM Processes and Forms Overview from MSS, it prompt me to change the password again and again.
    And on some user HCM Processes and Forms Overview not shown properly.
    Error while processing your query
    What has happened?
    The URL call http://<host name>:1080/sap/bc/webdynpro/sap/asr_pa_pd_processes_display was terminated because of an error.
    Note
    The following error occurred in system BEQ : Parameter has invalid value: Parameter TSTMP1 has invalid value 0 .
    The error occurred on application server MUMSAP02_BEQ_00 and in work process 8 .
    The termination type was: RABAX_STATE
    The ABAP call stack was:
    Method: SUBTRACT of program CL_ABAP_TSTMP=================CP
    Method: SUBTRACT_TIMESTAMPS of program CL_HRASR00_PROCESS_UTILITIES==CP
    Method: GET_CURRENT_TIME_DATA of program CL_HRASR00_PROCESS_UTILITIES==CP
    Method: START_TRACKING of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
    Method: IF_COMPONENTCONTROLLER~START_TRACKING of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
    Method: HANDLEDEFAULT of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
    Method: HANDLEDEFAULT of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
    Method: IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
    Method: INVOKE_EVENTHANDLER of program CL_WDR_DELEGATING_IF_VIEW=====CP
    Method: DISPLAY_TOPLEVEL_COMPONENT of program CL_WDR_CLIENT_COMPONENT=======CP
    What can I do?
    If the termination type is RABAX_STATE, you will find more information on the cause of termination in system BEQ in transaction ST22.
    If the termination type is ABORT_MESSAGE_STATE, you will find more information on the cause of termination on the application server MUMSAP02_BEQ_00 in transaction SM21.
    If the termination type is ERROR_MESSAGE_STATE, you can search for further information in the trace file for the work process 8 in transaction ST11 on the application server. MUMSAP02_BEQ_00 . You may also need to analyze the trace files of other work processes.
    If you do not yet have a user ID, contact your system adminmistrator.
    Error Code: ICF-IE-http -c: 350 -u: ISHAJI -l: E -s: BEQ -i: MUMSAP02_BEQ_00 -w: 8 -d: 20130514 -t: 133514 -v: RABAX_STATE -e: UNCAUGHT_EXCEPTION -X: D4AE5218F8121ED2AF8DA00F61FBEAC0_D4AE5218F8121ED2AF8DA00F5D19EAC0_1 -x: 006DBCE20F7BF1E58AC0D4AE5218F812
    HTTP 500 - Internal Server Error
    Your SAP Internet Communication Framework Team
    Please suggest me the solution.
    Regards,
    Devendra

    Dear Andrea,
    I reset the password of backend user and gave sap_all and sap_new role.
    Last time it prompt the screen in mss as to change the password. (See above screen shot).
    But after reset the password...error showing instead of login screen in mss as below:
    Error while processing your query
    What has happened?
    The URL call http://<host name>:1080/sap/bc/webdynpro/sap/asr_pa_pd_processes_display was terminated because of an error.
    Note
    The following error occurred in system BEQ : Parameter has invalid value: Parameter TSTMP1 has invalid value 0 .  
    The error occurred on application server MUMSAP02_BEQ_00 and in work process 7 .
    The termination type was: RABAX_STATE
    The ABAP call stack was:
    Method: SUBTRACT of program CL_ABAP_TSTMP=================CP
    Method: SUBTRACT_TIMESTAMPS of program CL_HRASR00_PROCESS_UTILITIES==CP
    Method: GET_CURRENT_TIME_DATA of program CL_HRASR00_PROCESS_UTILITIES==CP
    Method: START_TRACKING of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
    Method: IF_COMPONENTCONTROLLER~START_TRACKING of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
    Method: HANDLEDEFAULT of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
    Method: HANDLEDEFAULT of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
    Method: IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
    Method: INVOKE_EVENTHANDLER of program CL_WDR_DELEGATING_IF_VIEW=====CP
    Method: DISPLAY_TOPLEVEL_COMPONENT of program CL_WDR_CLIENT_COMPONENT=======CP
       What can I do?
    If the termination type is RABAX_STATE, you will find more information on the cause of termination in system BEQ in transaction ST22.
    If the termination type is ABORT_MESSAGE_STATE, you will find more information on the cause of termination on the application server MUMSAP02_BEQ_00 in transaction SM21.
    If the termination type is ERROR_MESSAGE_STATE, you can search for further information in the trace file for the work process 7 in transaction ST11 on the application server. MUMSAP02_BEQ_00 . You may also need to analyze the trace files of other work processes.
    If you do not yet have a user ID, contact your system adminmistrator.
    Error Code: ICF-IE-http -c: 350 -u: IKHASU -l: E -s: BEQ -i: MUMSAP02_BEQ_00 -w: 7 -d: 20130514 -t: 175940 -v: RABAX_STATE -e: UNCAUGHT_EXCEPTION -X: D4AE5218F8121ED2AF923E065A39EAC0_D4AE5218F8121ED2AF923E394271EAC0_1 -x: F091BCE2D132F1D58AC0D4AE5218F812
    HTTP 500 - Internal Server Error
    Your SAP Internet Communication Framework Team
    I checked log in ST22 as below
    What happened?
        The exception 'CX_PARAMETER_INVALID_RANGE' was raised, but it was not caught
         anywhere along
        the call hierarchy.
        Since exceptions represent error situations and this error was not
        adequately responded to, the running ABAP program
         'CL_ABAP_TSTMP=================CP' has to be
        terminated.
    Error analysis
        An exception occurred that is explained in detail below.
        The exception, which is assigned to class 'CX_PARAMETER_INVALID_RANGE', was not
         caught in
        procedure "SUBTRACT_TIMESTAMPS" "(METHOD)", nor was it propagated by a RAISING
         clause.
        Since the caller of the procedure could not have anticipated that the
        exception would occur, the current program is terminated.
        The reason for the exception is:
        Parameter has invalid value: Parameter TSTMP1 has invalid value 0.
    Regards,
    Devendra

  • Use HCM processes and Forms without using the Enterprise Portal

    is it possible to leverage existing HR Admin Services (HCM processes and Forms) functionality without using the Enterprise Portal?
    1) Create an Adobe form and Interface using SFP
    2) Set up ISR and Form Scenario
    3) Set up Forms configuration to use existing Backend and generic Services
    4) Set up workflow to updated Backend using Services
    is it possible to do the above steps and not use the Portal? If Yes, how do we present the forms to the Manager, and provide different buttons that appears on the Portal by default?
    Any ideas will be greatly appreciated.
    Thanks,
    Saurabh

    Hi Saurabh,
    your assumptions and findings (items can not be started from the backend workflow inbox etc.) are correct: These processes can not be started without the Portal and it is not intended to do this.
    The above mentioned backend report are only forseen for implementation and testing purposes and not for productive use.
    In addition to the fact, that you already can't execute the work items a lot of other features of the framework (Process Browser etc.) are only available through the Portal.
    Best Regards
    Michael Bonrat - Solution Manager HCM Processes and Forms
    Info about HCM Processes and Forms:
    www.service.sap.com/erp: 
    - SAP ERP Human Capital Management -> Workforce Process Management -> HCM Processes and Forms

  • Error while Accessing the HCM process and forms

    Hi All,
    We have implemented HCm process and forms. Everything was working fine earlier but for past few days we are facing an issue after selecting an employee and clicks on the select process we are getting the following error. Kindly povide the solution.
    The following error text was processed in the system GOA : Component Usage OADP_USAGE Does Not Have an Active Component
    The error occurred on the application server sapgoa_GOA_37 and in the work process 4 .
    The termination type was: RABAX_STATE
    The ABAP call stack was:
    Method: ENSURE_ACTIVE_COMPONENT of program CL_WDR_COMPONENT_USAGE========CP
    Method: GET_INTF_CONTROLLER_INTERNAL of program CL_WDR_COMPONENT_USAGE========CP
    Method: IFWDR_INTERNAL_API~GET_INTERFACE_CTLR_DELEGATE of program SAPLWDR_RG_PROXY_FACTORY
    Thanks & Regards,
    Sreelatha Gullapalli.

    Hi,
    In EhP4, the employee search is created using OADP framework . And if the relevant configuration is not maintained , I mean there is a view cluster where the applications (PA/PD) and relevant object types are maintained.
    If this is not maintained, this creates a error. Please check .
    Hope this helps.
    Best Regards
    Saujanya

  • Change of Position in MSS with Process and Forms

    Hi,
    I'm trying to create authorizations for a change of position in Process and Forms, but every time that I choose a new position to the employee I get the error, No authorization, with this details:
    No authorization
    Message no. 5A277
    Diagnosis
    You are not authorized to perform this activity.
    System Response
    The system cancels the activity you have tried to perform.
    Procedure
    If necessary, you can maintain missing authorizations in Customizing. Please remember that both the standard authorizations and the structural authorizations are checked.
    I have managed to change the position and create positions in SAP with t-code PPOME, but in the MSS Portal it doesn't work.
    I use authorization with context ( S_ORIGINCON ) with a FM in the structural profile that returns my objects ( O, S, P ). I also have personnel planning authorization ( PLOG ) for the returned objects.
    Any help to overcome this problem will be greatly appreciated.
    Regards,
    Diogo Silva.

    Hi there,
    We stop using SAP code to manipulate the infotype 0001, and started using our own code throw generic services I guess (Not my part of the project).
    The problem was that in a change of position for a new created position or even for an existing position there was a need for access to the default position OBJID='99999999'. That's why when you give authorization for object OTYPE=' ' and OBJID = ' ' you will not get an error, because it gives authorization for all objects, witch defeats the purpose of security.
    If you debug the functions used by the portal (MSS or ESS) you will see that in some FM on the call stack there is passed a flag that controls wether or not there is a authorization check for that default position.
    Basically ww stop using the SAP code, and started calling this FM (BAPI, etc) ourselves, and them we manipulated that flag so that we could circumvent the error.
    I hope it was clear, sorry if it was not, truth be told it was a long time since I finish that project.
    If you need anymore help just let me know.
    Regards,
    Diogo Silva.

  • Default value in dropdown field for FPM form in HCM Processes and forms

    Hi Experts,
    I am developing HCM Processes and forms using FPM forms and I had a dropdown list contains ten values. So, every time while opening the form first time, my dropdown field should be defaulted with fifth value from the list. How can we achieve this in dropdown field related to FPM Form.
    Please guide me.
    Regards,
    Nayani.

    You would have to assign the default value to one your custom generic services.
    Regards.
    PS: There are posts which talk about generic services , make yourself comfortable with the concept of generic services.

  • Create Adobe Form using Design Time for Processes and Forms

    Hi all,
    I am trying to create a form that have 3 fields:
    1. pernr
    2. ename
    3. effective_date
    I done all the necessary setup of BADI ,class, interface and form.
    I need the step to step guide where you create the adobe form using the Design Time for Processes and Forms. Anyone have any idea?
    Edited by: Siong Chao on Jan 3, 2011 4:54 AM
    Edited by: Siong Chao on Jan 3, 2011 5:00 AM

    Hi,
    I couldn't get to your query..
    What do you mean by step by step procedure for a design time & process for forms.
    if you are a beginner and looking for basic examples to implement adobe forms there are lot of them in SDN, please search them.
    let me know if your query was a very specific one.
    Cheers,
    Sai

  • Workflow could not start in HCM process and Forms

    Hi All
    It would be really helpful if you can suggest possible solution regarding case management case in HCM forms and process.
    I have set up a simple custom HCM process and Form regarding Infotype 2 updation. I have checked the process and form consistency and it seems fine. Now when I run the process from HRASR_DT it generates a process number but it also gives an error workflow could not start.I get following error (SWIA log - Step history)
    Executing flow work item - Transaction brackets of the workflow has been damaged
    Exception occurred - Error when starting work item 000000007031
    PROCESS_NODE - Error when processing node '0000000014' (ParForEach index 000000)
    CREATE - Error when creating a component of type 'Step'
    CREATE_WIM_HANDLE - Error when creating a work item
    CREATE_VIA_WFM - Exit CL_HRASR00_POBJ_WF_EXIT triggered exeception for event CREATED and (target) status
    EVENT_RAISED - Error updating the process object
    Executing flow work item - Exit CL_HRASR00_POBJ_WF_EXIT triggered exeception for event STATE_CHG and (target) status READY->ERROR
    EVENT_RAISED - Error updating the process object
    Executing flow work item - Transaction brackets of the workflow has been damaged
    Executing flow work item - Work item 000000007031: Object FLOWITEM method EXECUTE cannot be executed
    Executing flow work item - Error when processing node '0000000014' (ParForEach index 000000)
    I have searched few SAP notes such as 1384961 which talks about same error but it is implemented in our system (EA-HR 604 , Patch 27, )
    Appreciate any help.
    Thanks
    Umang

    Hi Swati
    One of the similar (not exact) issues were resolved by correcting the event linkage....please refer thread:
    http://scn.sap.com/message/14848795#14848795
    Not sure of the details of the the resolution, maybe Ragavendran Kanagaraj can throw more light.
    Just some high level checks (if not done already):
    Check event linkage errors in SWEQADM if anything is related to your WF
    Check in SWEL if it's showing any more details (not sure if it will)
    Any warnings in syntax check of WF template (PFTC) or WF definition (SWDD)
    Any error sin binding
    regards,
    Modak

  • Message Handling in HCM Process and Forms

    Hi,
    I have added own messages logic
    MESSAGE_HANDLER Type Ref To     IF_HRBAS_MESSAGE_HANDLER
              message_handler->add_message( message = message ).
    in "DO_OPERATION" method of Generic Service in HCM process and Forms.
    Problem : We have handled messages in method "DO_OPERATION"  but when we click on NEXT push button (review and send)at mss level, same error messages is displayed for 2 times above the adobe form.
    Same error messages are displayed as many times as we click on NEXT push button.
    Need Solution : It is supposed to display only once.
    Thank You,
    Swetha.C

    Hi Shweta,
    Please check SY-UCOMM in both the cases.
    1. After Selecting Position
    2. After Clicking 'Next' Button.
    If SY-UCOMM is different, Then Add message to Message_handler only when Position is selected.
    That means If sy-ucomm = Position select User command
    Then Add message to Message_handler.
    endif.
    'Else dont ADD'
    Hope this helps.
    Pradeep.

  • Query on HCM Processes and Forms

    Hi
    I am facing some issues in configuring Hiring Forms in HCM Processes and Forms. I can place them in 2 baskets and describe each of them below. I would appreciate any advise on ways and means to overcome these errors.
    Basket #1
    I want to use the standard forms SHU1, SHU2 in development environment to understand the HCM P&F functionalities. I copied these form scenarios from client 000 and did all the configurations as outline in IMG activity HRAdministrative Services >> Configuration of Forms and Processes >> Sample Processes for HCM Process and Forms.
    When I run a check using HR Administrative Services >> Configuration of Forms and Processes >> Configuration of Forms >> Check Consistency of Form Scenarios and select Form name, I get errors along following lines:
    u2022     Error Message Sample#1 Form scen SHU1 vers. 00000 serv. SAP_PA: Only one deflt value allowed for field I0009_ZLSCH
    u2022     Error Message Sample#2 Form scen. SHU1 vers. 00000 service SAP_PA: Field I0007_ARBST default value is not created
    u2022     Error Message Sample#3 ISR scenario SHU1 version 00000: Field I0001_BUKRS is missing
    u2022     Error Message Sample#4 Form scen. SHU1 vers. 00000: Field I0007_ARBST service for default values not required
    However, at the bottom of the log I see this message in Green: Form scenario SHU1 version 00000: Form scenario is consistent
    I tried to make the changes as suggested in the Long Text for each of these messages. Probably due to the fact that I am using standard delivered forms, I get this message u201CDo not make any changes (SAP entry)u201D and I am unable to save the changes.
    Basket #2
    In this basket I have Org_Change form and have managed to go the whole nine yards and complete the configuration in ECC. The consistency checks for process and forms are in green. However, I am unable to start the process through Portal. I get this message u201Cno data availableu201D when I try to select a process.
    Among the 5 roles delivered in SAP as initiators for processors u2013I am interested in 3 of them HRASARA (for HR Administrator). I have configured HRASRA and HRASRB as initiators for Org_Change. However, I am not able to figure out how to link these roles to portal roles such as SAP_ASR_ADMINISTRATOR, SAP_ASR_MANAGER etc.
    I would appreciate any advise on ways and means to overcome these errors.
    Thanks
    Subhash

    Have you been able to fix your issue in Basket # 2 ?

  • Use of Table in HCM Processes and Forms

    Hi Guys,
    I am developing an Adobe form for the HCM process and forms .My requirement is to populate table values in the adobe form   based on a value got in  the backend service.
    I tried declaring an internal table in the backend service but in vain.So decided to code inside the context of the form.But was not able to use the parameters available in the
    Now the trouble is how to get the value from the form scenario field and populate that table.
    Please provide your thoughts.
    Regards,
    Aravind.P

    Hello Aravind,
    Could you please tell us how you solved this ?
    Edited by: Gopi chelvam on Mar 24, 2010 6:13 AM

Maybe you are looking for

  • From DVD to FCP

    Hey guys,  I saw a post for this but it was older and wanted to know if it is still accurate.  I am taking DVDs to edit in FCP.  I am using mpegstreamclip but what is/are the best setting(s) to export?  Thanks

  • Load balancing on cisco rv042

    Hi friends, This is regarding I am facing issue with configuring the load balancing in cisco rv042 .I had configured the load balancing between dual wan of leased line and adsl coonection but loadbalancing is not working fine kindly help me on this

  • Stoping recovery process....ORA-01110

    Hi experts; I have created physical Standby. I am getting archives when I start the recovery process by issuing alter database recover managed standby database using current logfile disconnect; But when I stop this process & alter database open alter

  • Discussion Forum Portlets - Anyone using in Production?

    This is a followup to another post. Is anyone using the sample Discussion Forum and Discussion Forum Admin portlets provided in WebLogic Portal 8.1 in a production environment? I've already received feedback from one person who had difficulties and d

  • Dreamweaver Updater error U44M1P7

      Dreamweaver CS5.5 11.5.3 Updater   Installation failed. Error Code: U44M1P7 Yesterday I also got error U44M1P7