Process chain activation : 0 c hains were selected

Hi all
I have scheduled process chains in production.
Because one of the metachain is showing error while loading infopackage,in the production I have created a new infopackage and added it to the chian.Then activated the metachain.
But when i was trying to activate the main chain it showing message"0 chains were selected"
As a result when i scheduled the chain the old meta chain comes into picture instead of the modified chain.
ERROR MESSAGE
0 Chains Were Selected
Message no. RSPC031
Diagnosis
Specifying process chain ID 'ZN_0MATERIALATTR, type V2&', and variant '' has resulted in the selection of 0 process chains. The selection has been called without confirmation by the user. This means that the user was unable to make a selection.
System Response
The function is terminated.
Procedure
There is porbably an error in the program. Look for corresponding notes.
Please let me know how to solve this issue.
Thanks,
harika.
Edited by: harikag on Nov 9, 2011 6:33 AM

Hi harika,
Looks like the new meta chain was not in activated state....
Was the meta chain active and scheduled?
Is the meta chain running for the first time?
Also check the scheduling options how the Meta process chain is triggered?
if so , Make sure the event exist in the new meta chain. this may be causing the error.
if you had changed and created a new meta chain try to activate the new meta chain once and schedule it again and check.
Have you transported the PC or created in Production directly?
if transported from dev to prod check the log if there are any errors?
Also check if the below s note helps you
Note 1323015 - Correction: RSPC031 during transport of metachains
Regards
KP
Edited by: prashanthk on Nov 9, 2011 12:16 PM

Similar Messages

Why process chain activation is taking more time?

Hi BW Gurus,
I am going to activate the process chain, but it takes more time to activate the process chain . What may be the reasons ?
Regards,
Raju

Hi,
Process chain activation becomes slow due to the following reasons.
1)Large no of entities in RSPCCHAIN Table i.e, there is lot of process chains and very large process chains.
2)There is a missing index for the RSPCCHAIN Table.
Solution for this problem is we have to create an index for the following fields of the RSPCCHAIN table.
EVENT_GREEN
EVENT_PGREEN
EVENT_RED
EVENT_PRED
Still if you want further clarification on this , Refer the following sap notes.
906512---Activating process chain is very slow.
Related Notes: 872275, 872273& 872271 .
Regards,
Chendrasekhar

Error in process chain activation

HI
I am learning on 3.0b,(on my pc) while using process chains, at the time of activating the process chain it is giving the following error "JOB BI_PROCESS_PSAPROCESS COULD NOT BE SCHEDULED, TERMINATION WITH RETURN CODE 8". Why am getting this error, is there anything wrong with my system or software or there any mistake in activating process chain" (what ever may be the process type i use, i am getting this error), plz help me.
thanks

Hi Ganesh,
The possible reason for that error is the User type of the background user. Please check out OSS note 511475 which talks about this problem and possible solution. I have used this earlier.
You can see this for info on how to make the change:
/message/685940#685940 [original link is broken]
Hope this helps...

In Process Chain Activation of DSO is falling

Hello Techies,
In the Process chain the activation of DSo is falling but when I go and check the in the Manage DSo.
The Data is activated and available for reporting.
I dont know why in the Process chain the activation of DSO is falling ?
Regards,
Quaraishi

Hi
It depends on background job resource availability at the time of DSO Activaton. Also check the settings of the variant DSO Activation process for each DSO activation and make it separate with number of processes to 2 for activation.
Save the changes and activate it. Should work correctly now.
Thanks,
Sunil

Process chain Activation Variant failed

Dear Gurus
In BI7 executed a process chain,in this ods activation is in 4 th step,turned in to red,i repeated and got executed.
Questions:
1.I checked in DSO all data got activated,only in process chain showed red status....how it is possible.
2.Eventhough 4th step turned in to red,below all (5,6,7...th steps) went through,how it happened,if some variants failed means next variant should not get executed?
3.When i did repeat it thrown ABAP debugging screen,i executed and went through well,ods activation variant became green.
When i was trying to see display message,it is empty no error message.
Root cause analysis i should give...pls how and where to do the analysis.....
Thanks and regards
T.Gadhatharan

Hi,
1.I checked in DSO all data got activated,only in process chain showed red status....how it is possible.
In the ODS Activation Process, is there any other ODSs existed for activation?
2.Eventhough 4th step turned in to red,below all (5,6,7...th steps) went through,how it happened,if some variants failed means next variant should not get executed?
After the 4th Step, the further processes executed means, they might have put the settings as Success or failure of the predecessor process it can through the further 5th, 6th and 7th processes.
3.When i did repeat it thrown ABAP debugging screen,i executed and went through well,ods activation variant became green.
Check for short dumps ST22.
Hope it helps.
Veerendra.

Admin cockpit - Business Content Process chain Activation failure

Hi,
we are working in Admin cockpit in sand box server.
we are activating the Business Content Process chain by taking all variants (begin with 0TCT) but we are getting the error message that Process AND has no predecessor.
Could you kindly suggest any thing to move further.
Thanks & Regards,
Shaliny. M
Edited by: shaliny mega on Mar 19, 2008 7:04 AM

Hi shaliny,
As mentioned in this post
https://www.sdn.sap.com/irj/sdn/forums.
Have u collected the Source system for which ur collecting the PC when u r activating Business conent?
Collect the source system when u r activating the PC. Give a try.
if it is useful assign points.
Regards,
Senthil

New Process Chain Activation

When a new process is transported to qa or prod it has to be MANUALLY activated one time before the NEW: prefix is removed and the chain can be used by a meta chain.
Is there a configuration setting or some way to have the chain AUTOMATICALLY activated when it is transported to qa or prod?
Thanks,
Mike S.

Hi Mike,
Welcome to SDN!!
You would need to do that to enable the schedule the process chain. I did notice an OSS Note or some document which stated the settings usinh which we can avoid this. I dont have access to my documents now. Would search and post.
Meanwhile all the posts discussed here talk about manual activation:
Process chain scheduling in QA
Process Chain Status is new after transport to QA
Also chek this blog:/people/sap.user72/blog/2005/09/05/sap-bw-and-business-content-datasources-in-pursuit-of-the-origins
Bye
Dinesh

Process chains Activation

Hi,
I have transported few Process Chains(PC) from DEV -> PROD system.
I am not able to activate the same. All the PCs are in 'Not assigned' Node and are grey.
These PC were running normal in DEV.

Hi,
In general, PC will in inactive status ,eventhough transports are successfully imported.
you can try to activate manually.
Ur second question is ur not ablr to activate the PC?
In production becasue of security resons cross clint will be closed, we can not activate the PC if the cross clint is closed.
Check with the basis team to open cross clint and try to activate.
This just for your info...cross clint will be open via SCC4 transaction...this is secure transaction,use care fully.
Hope this helps you...Let us know if u requre any further info on this.
Best Regards,
Maruthi

Process chain activation error in BI7...

hi gurus,
we are creating process chain for master data for
0PROMOTION_ATTR
0PROMOTION_TEXT
0SALESORG_ATTR
0SALESORG_TEXT
0CUSTOMER_ATTR
0CUSTOMER_TEXT
0VTYPE_TEXT
0DIVISION_TEXT
0SALES_GRP_TEXT
0DISTR_CHAN_TEXT
0CUST_GROUP_TEXT
0SALES_OFF_TEXT
0MATL_GROUP_TEXT.
we have created 1 start process and then execute info packages and DTP'S and used 'OR' conditions to connect to Attribute change run.
while i try to save my process chain its giving warning that 'Add at least one process to the chain before saving' and when i try to activate the chain its giving below error
Chain has no starter. Add a starter.
Message no. RSPC020
Diagnosis
The process chain has no start-process. A process chain always requires exactly one general starter.
System Response
The system is unable to activate the process chain.
Procedure
Add a general starter to the chain, and schedule it as the first process in the chain.
please suggest me how to rectify the problem.
regards

Hi Harish,
Will you please goto process chain start varint and give the new varint for that and try to execute it once again..it will work for you...
If you could check once the check button all will be green and you can able to activate the process chain...I hope you are maintained the infoobjects in attr bute change run...problem might be with the start varint ionly...change the start varint and if you could not able to activate please let me know....
Regards
Srini

Process Chain Activation Error

Hi Experts,
                We are Transferring Data from Flat file to Infocube using PROCESS CHAIN..
Process chain Formation:
Start -
>> Infopackage----->>Delete Index--->>DTP--
>>Create Index
While Connecting START Variant with Infopackage i am getting following Error....
Access via 'NULL' object reference not possible.
A Short Dumb Created Contains Following Messages
Error in the ABAP Application Program
The current ABAP program "CL_RSPC_FRONTEND==============CP" had to be                     terminated because it has come across a statement that unfortunately cannot be executed.
Note :
1. we are also try to drag the start variant with Infopackage it is not connected .
2. Datasource and Infopackage are Delta Enabled.
Need Solution?
Thanks

Hi ,
          We are allready give our file in Transaction Code : AL11 ==> DIR_HOME , But Same Error Coming ?
What is the Problem?
Thanks

Process chains-Error occurred in the data selection-DBIF_RSQL_TABLE_UNKNOWN

Hi All,
The problem occurred in PC which was running smooth until now
Now I am getting message:
in BI : Error occurred in the data selection
When I went in R/3 it shows DBIF_RSQL_TABLE_UNKNOWN
Probably the only way to eliminate the error is to correct the program.
Please check the entries in the system log (Transaction SM21).
Internal call code.........: "[RSQL/READ/PA0009 ]"
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
DBIF_RSQL_TABLE_UNKN
SAPLXRSA" or "ZXRSAU
EXIT_SAPLRSAP_002"
Can anyone explain..

Hi ,
Check note 950317.
also check the blow forum having same kind of discussion :
Runtime Errors DBIF_RSQL_TABLE_UNKNOWN
Short dump error DBIF_RSQL_TABLE_UNKNOWN
DBIF_RSQL_TABLE_UNKNOWN
thanks,
Deepak

How to do a infocube selective deletion in a process chain ?

Hi all,
I encounter a little diffculty : I have a process chain that allow me to load daily R/3 datas into a BW/APO infocube, that works perfectly. The problem is that the volume of datas naturally keeps on growing, so I'd want to create a new step in the process chain, that would allow to make selective deletion in the cube.
For example, after every data loading in the infocube, datas of the cube that are dating of more than x days should be removed. I just can't find a process that allows me to do that, but only"complete deletion of data target contents", or "delete overlapping requests from infocube".
I'm quite sure there's an easy way to do that but.... Anyone go an idea please ?
Many thanks !
Fabrice

Hi Fabrice,
To my knowledge, there is no standard process type in process chian that can do this. You can include a program that can delete the old records. I am sure it is a simple login in it. You can do selective deletion in infocube manually but I wish we have a variant that can be created at this screen and refer in a process type. But at this time, I see only the program as solution.

Problem when running GPS in Process Chains

Hi,
we have a GPS which has a set of planning functions. we have included this GPS in the Process Chain using "UPC_BUNDLE_EXECUTE". we have a selection of two profit centers. It has taken 18 hrs for the GPS to complete. it was running at its maximum speed on the background server it has run.
we split the GPS into two for the two profit centers creating the necessary planning package for the two profit centers. we modified the process chain to run the two GPS in parallel(one for each profit center). This is so that each GPS can run on one server. The background user is BWremote.
when we run the GPS on process chain one of the GPS has failed because of read locks. but the other has completed successfully. this might be because both the GPS were running under the same user id. when we run the same GPS in dialog under two different users at the same time it works fine.
Can anybody help us with some idea of how to run the GPS in parallel without locks for different selections. Is there anyway we can run them with out creating new users for each background job.
Thank you very much in advance.
Ravi.

Hi Ravi,
   Other than the level/package definition that need to be specific for each one of
   the Profit Centers with no overlap records between the two packages, you can
   also try using UPC_BUNDLE_EXECUTE_STEP program to split them into two
   and potentially run without locks in a sequence.Also make sure that the user
   id that is being used to run these functions has appropriate authorization that
   is hopefully not based on a hierarchy but based on Master data.
   Hope this helps.
Cheers
Srini

How to schedule the process chain fr the report

hai experts,
i have a query which i need to generate for every five hours? i know that we can generate the report thr process chain but i dont know how to build that..
my question is how to schedule the report,how to build the process chain,....
can any one plz tell me how to start this generating report for every five hours
thanks in advance..points will be alloted surely ,i need this urgently..
Suri

First of all you need to Identify the InfoObjects if you want to take up Master Data Loads, and if you want take up transaction loads then select the Data Targets to which the data has to be updated. Then plan the dataflow accordingly.
You want to create a Process Chain, Go to RSPC, and then select the create option and from the Process categories available on the left handside drag and drop the Start process, then define the Variant for the same. In the same way you need to identify the other Process Types available on the lefthand side. For Eg: Start Process>Load to ODS>Activation of ODS Data>Delete Indexes for the InfoCube>Load to InfoCube>Create Indexes>Delete Overlapping Req-->Agg. Rollup.
This is how you need to specify the dataflow, several other Process Types also included based on the requirement For Eg: Sending Mail Alerts when the Job is Success or Terminated.
Also, have a look at this links to make urself clear about the steps in creating Process Chain.
http://help.sap.com/saphelp_nw04/helpdata/en/67/13843b74f7be0fe10000000a114084/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/events/sap-teched-03/using%20process%20chains%20in%20sap%20business%20information%20warehouse
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/19683495-0501-0010-4381-b31db6ece1e9
Hope it helps.
Regards,
Archna

Creating process chains

Hi guys,
I need a step-by-step guide on how to create process chains urgently, could you please walk me through the process of what to click on to begin with e.t.c.
Thanks in advance

Hi Gurbinder,
First of all you need to Identify the InfoObjects if you want to take up Master Data Loads, and if you want take up transaction loads then select the Data Targets to which the data has to be updated. Then plan the dataflow accordingly.
You want to create a Process Chain, Go to RSPC, and then select the create option and from the Process categories available on the left handside drag and drop the Start process, then define the Variant for the same. In the same way you need to identify the other Process Types available on the lefthand side. For Eg: Start Process>Load to ODS>Activation of ODS Data>Delete Indexes for the InfoCube>Load to InfoCube>Create Indexes>Delete Overlapping Req-->Agg. Rollup.
This is how you need to specify the dataflow, several other Process Types also included based on the requirement For Eg: Sending Mail Alerts when the Job is Success or Terminated.
Hope this will Help you..
Regards,
Madhu

Process chain activation : 0 c hains were selected

Similar Messages

Maybe you are looking for