Process Chain Activation Error

Hi Experts,
                We are Transferring Data from Flat file to Infocube using PROCESS CHAIN..
Process chain Formation:
Start -
>> Infopackage----->>Delete Index--->>DTP--
>>Create Index
While Connecting START Variant with Infopackage i am getting following Error....
Access via 'NULL' object reference not possible.
A Short Dumb Created Contains Following Messages
Error in the ABAP Application Program
The current ABAP program "CL_RSPC_FRONTEND==============CP" had to be                     terminated because it has come across a statement that unfortunately cannot be executed.
Note :
1. we are also try to drag the start variant with Infopackage it is not connected .
2. Datasource and Infopackage are Delta Enabled.
Need Solution?
Thanks

Hi ,
We are allready give our file in Transaction Code : AL11 ==> DIR_HOME , But Same Error Coming ?
What is the Problem?
Thanks

Similar Messages

Process chain activation error in BI7...

hi gurus,
we are creating process chain for master data for
0PROMOTION_ATTR
0PROMOTION_TEXT
0SALESORG_ATTR
0SALESORG_TEXT
0CUSTOMER_ATTR
0CUSTOMER_TEXT
0VTYPE_TEXT
0DIVISION_TEXT
0SALES_GRP_TEXT
0DISTR_CHAN_TEXT
0CUST_GROUP_TEXT
0SALES_OFF_TEXT
0MATL_GROUP_TEXT.
we have created 1 start process and then execute info packages and DTP'S and used 'OR' conditions to connect to Attribute change run.
while i try to save my process chain its giving warning that 'Add at least one process to the chain before saving' and when i try to activate the chain its giving below error
Chain has no starter. Add a starter.
Message no. RSPC020
Diagnosis
The process chain has no start-process. A process chain always requires exactly one general starter.
System Response
The system is unable to activate the process chain.
Procedure
Add a general starter to the chain, and schedule it as the first process in the chain.
please suggest me how to rectify the problem.
regards

Hi Harish,
Will you please goto process chain start varint and give the new varint for that and try to execute it once again..it will work for you...
If you could check once the check button all will be green and you can able to activate the process chain...I hope you are maintained the infoobjects in attr bute change run...problem might be with the start varint ionly...change the start varint and if you could not able to activate please let me know....
Regards
Srini

Why process chain activation is taking more time?

Hi BW Gurus,
I am going to activate the process chain, but it takes more time to activate the process chain . What may be the reasons ?
Regards,
Raju

Hi,
Process chain activation becomes slow due to the following reasons.
1)Large no of entities in RSPCCHAIN Table i.e, there is lot of process chains and very large process chains.
2)There is a missing index for the RSPCCHAIN Table.
Solution for this problem is we have to create an index for the following fields of the RSPCCHAIN table.
EVENT_GREEN
EVENT_PGREEN
EVENT_RED
EVENT_PRED
Still if you want further clarification on this , Refer the following sap notes.
906512---Activating process chain is very slow.
Related Notes: 872275, 872273& 872271 .
Regards,
Chendrasekhar

Error in process chain activation

HI
I am learning on 3.0b,(on my pc) while using process chains, at the time of activating the process chain it is giving the following error "JOB BI_PROCESS_PSAPROCESS COULD NOT BE SCHEDULED, TERMINATION WITH RETURN CODE 8". Why am getting this error, is there anything wrong with my system or software or there any mistake in activating process chain" (what ever may be the process type i use, i am getting this error), plz help me.
thanks

Hi Ganesh,
The possible reason for that error is the User type of the background user. Please check out OSS note 511475 which talks about this problem and possible solution. I have used this earlier.
You can see this for info on how to make the change:
/message/685940#685940 [original link is broken]
Hope this helps...

Process chain gives error when activating

Hi,
I created a process chain, nothing spectacular. I am going to fill a Cube using an infopackage, this is a delta update infopackage.
Anyway, so my process chain is done and I activate it, and I get the following error message:
"InfoPackage ZPAK_EY32OUHBC7FOBBX70AUJWSVE3 is generated; NOT able to be used as loading variant"
So what is this? I am not allowed to use this infopackage? I have to create a new one?
In the production system the cube has already had a delta-init and some delta updates, using the above mentioned info package. The updates are scheduled in jobs, but we are setting up process chains for this. So does this mean I cannot use that infopackage, have to create a new one, do a new init and then run deltas with a different infopackage?
On the test system there was no problem, though I should note that there was no delta info package yet and I created one myself.
Has anybody seen this before?
Kind regards
Ina

Hi Erik/Ina,
When you are including InfoPackage in a process chain, make sure that these are not the ones generated by the system in the datamart process. Please create you own InfoPackages for full and delta load as reqd (like for when loading from ODS to cube, or cube to cube, or ODS to ODS: all data mart scenarios), and then include these in your process chain. It should be fine.
Hope this helps...

Process chain Transport error in BI7

Hello All,
              We are facing an error while importing a transport request in the BI7 system. The objects collected in the transport request are
InfoPackage
Process chain
Process variants
Table Contents
The error which we are facing is as follows,
Start of the after-import method RS_RSPC_AFTER_IMPORT for object type(s) RSPC (Activation Mode)
Version 'M' of chain LAP_ROM_CS_LOAD_DAILY was saved without checking
Results of check for process     in chain :
Results of check for process     in chain :
Results of check for process LOADING ZPAK_3GBB2YPFIQL01BW1IDLUNON45 in chain LAP_ROM_CS_LOAD_DAILY:
Kindly let us know if you had faced similar problem before.
regards,
Chandran

Hi Chandran,
I think that if you expand the transport/import log further there will be a more detailed error message. Can you
check this? If yes can you let us know what the error message text and error code is? It might be the case that
the note 659160 is relevant for the problem.
Best Regards,
Des.

Process chain Activation Variant failed

Dear Gurus
In BI7 executed a process chain,in this ods activation is in 4 th step,turned in to red,i repeated and got executed.
Questions:
1.I checked in DSO all data got activated,only in process chain showed red status....how it is possible.
2.Eventhough 4th step turned in to red,below all (5,6,7...th steps) went through,how it happened,if some variants failed means next variant should not get executed?
3.When i did repeat it thrown ABAP debugging screen,i executed and went through well,ods activation variant became green.
When i was trying to see display message,it is empty no error message.
Root cause analysis i should give...pls how and where to do the analysis.....
Thanks and regards
T.Gadhatharan

Hi,
1.I checked in DSO all data got activated,only in process chain showed red status....how it is possible.
In the ODS Activation Process, is there any other ODSs existed for activation?
2.Eventhough 4th step turned in to red,below all (5,6,7...th steps) went through,how it happened,if some variants failed means next variant should not get executed?
After the 4th Step, the further processes executed means, they might have put the settings as Success or failure of the predecessor process it can through the further 5th, 6th and 7th processes.
3.When i did repeat it thrown ABAP debugging screen,i executed and went through well,ods activation variant became green.
Check for short dumps ST22.
Hope it helps.
Veerendra.

Admin cockpit - Business Content Process chain Activation failure

Hi,
we are working in Admin cockpit in sand box server.
we are activating the Business Content Process chain by taking all variants (begin with 0TCT) but we are getting the error message that Process AND has no predecessor.
Could you kindly suggest any thing to move further.
Thanks & Regards,
Shaliny. M
Edited by: shaliny mega on Mar 19, 2008 7:04 AM

Hi shaliny,
As mentioned in this post
https://www.sdn.sap.com/irj/sdn/forums.
Have u collected the Source system for which ur collecting the PC when u r activating Business conent?
Collect the source system when u r activating the PC. Give a try.
if it is useful assign points.
Regards,
Senthil

URGENT-Process Chain - transport error

Hi
I am facing a problem in process chains
when I tranport to quality system my chains are not activated after importing it is raising the error as
Error in remote call of destination ABAP Connection
Message no. RSPC051
Diagnosis
The following error occurred during the remote function call for destination ABAP Connection:
Name or password is incorrect (repeat logon)
System Response
A short dump has probably been written in the other system.
Procedure
Look at the short-dump overview in the other system.
I am unable to get the solution!!!!! how to activate the chains in Quality.........It sreally urgent

hi,
chk the start variant of ur process chain whether an start immediate is choosen, if so change it to some date in future and try to transport.
Ramesh

Process chain activation : 0 c hains were selected

Hi all
I have scheduled process chains in production.
Because one of the metachain is showing error while loading infopackage,in the production I have created a new infopackage and added it to the chian.Then activated the metachain.
But when i was trying to activate the main chain it showing message"0 chains were selected"
As a result when i scheduled the chain the old meta chain comes into picture instead of the modified chain.
ERROR MESSAGE
0 Chains Were Selected
Message no. RSPC031
Diagnosis
Specifying process chain ID 'ZN_0MATERIALATTR, type V2&', and variant '' has resulted in the selection of 0 process chains. The selection has been called without confirmation by the user. This means that the user was unable to make a selection.
System Response
The function is terminated.
Procedure
There is porbably an error in the program. Look for corresponding notes.
Please let me know how to solve this issue.
Thanks,
harika.
Edited by: harikag on Nov 9, 2011 6:33 AM

Hi harika,
Looks like the new meta chain was not in activated state....
Was the meta chain active and scheduled?
Is the meta chain running for the first time?
Also check the scheduling options how the Meta process chain is triggered?
if so , Make sure the event exist in the new meta chain. this may be causing the error.
if you had changed and created a new meta chain try to activate the new meta chain once and schedule it again and check.
Have you transported the PC or created in Production directly?
if transported from dev to prod check the log if there are any errors?
Also check if the below s note helps you
Note 1323015 - Correction: RSPC031 during transport of metachains
Regards
KP
Edited by: prashanthk on Nov 9, 2011 12:16 PM

Process chain scheduling error( Job BI_PROCESS_DROPINDEX could not schedule

Hi,
I am scheduling the process chain but it was throwing an error.
Job BI_PROCESS_DROPINDEX could not be scheduled. Termination with returncode 8
Message no. RSPC065
Diagnosis
Program RSPROCESS is to be scheduled as job BI_PROCESS_DROPINDEX under user ALEREMOTE.
System Response
Scheduling terminated with return code 8. The meanings of the return codes are as follows:
SY-SUBRC = 4:
Scheduling terminated by user
SY-SUBRC = 8:
Error when scheduling job (JOB_SUBMIT)
SY-SUBRC = 12:
Error in internal number assignment
Procedure
Check the system log for more detailed information.
Execute Function
for this i have already checked
in RSPC menu tab
Process Chain >> Attributes >> Execution User
Choose "BW Background User" which should be ALEREMOTE.
above settings i have done.
even though when i am scheduling the process chain i am getting the same error
thanks
suman

Suman,
You are not able to schedule it b'coz it is getting scheduled from user RFCUSER whereas the background user should be ALEREMOTE.
There is an option somewhere in the Menu bar in RSPC to change the Execution user. Please change that to ALEREMOTE,
Please check whether your BW user has enough authorization to run this job. The above post tell you how to do it.

Send process chain in error by abap

Hi all,
I want to send in error my process chain by abap code, because i've a routine in transfer structure and on the particular conditions this code must stop the load.
How to send in error my process chain by abap?
The following code send in error the infopackage but not the routine in trasfer roule.
l_s_errorlog-msgid = 'Z_my_message_class'.
l_s_errorlog-msgty = 'E'.
l_s_errorlog-msgno = '001'.
APPEND l_s_errorlog TO g_t_errorlog.
thanks,
Alessandro

Alessandro
Check this link. It may give some info.
Thnaks
Sat
https://www.sdn.sap.com/irj/sdn/docs?rid=/webcontent/uuid/ee14e25d-0501-0010-11ad-8eb2861a7ec0 [original link is broken]

Process chain - After error ABAP - trigger a metachain start does not work.

Hi,
I have a process chain, where after an ABAP runs into red (ERROR MESSAGE triggered), another process type, like start a new meta-chain, or start an infopackage starts.... But is does not work. After i go to logs, it asks me whether i want to trigger the following jobs, if i choose yes, it works. But i need to start it automatically, when the ABAP Routine has an error message (RED) in the chain.
Any idea, because I tried to solve it all the day, but i did not manage to get itwork...
Many Thanks,
L.

Hi,
the problem is not the ABAP Program.
I have the following situation:
A Metachain contains as second step a call of local chain. After the local chain, according to the status of it (green o red), we have other different steps. So we have two different link (red and green) starting from the local process chain step.
Inside the local process chain there is the ABAP program that check several parameters and if something is not as expected fails with status red. if this situation happens, the local process chain becomes red and in SM37 inside the job i see the error that i forced, but the status is not triggered to the first metachain , so the corresponding following steps are not triggered.
This issue happens only if fails the ABAP program because, for example, a Infopackages loading fails every thing works and the corresponding steps in the metachain are executed.
In the ABAP program in order to force the status red we have the following code:
MESSAGE e162(00) WITH 'Status' 'Red'.
Any idea?
Thanks,
Veronica

In Process Chain Activation of DSO is falling

Hello Techies,
In the Process chain the activation of DSo is falling but when I go and check the in the Manage DSo.
The Data is activated and available for reporting.
I dont know why in the Process chain the activation of DSO is falling ?
Regards,
Quaraishi

Hi
It depends on background job resource availability at the time of DSO Activaton. Also check the settings of the variant DSO Activation process for each DSO activation and make it separate with number of processes to 2 for activation.
Save the changes and activate it. Should work correctly now.
Thanks,
Sunil

Process chain creation: error:

Hi,
i am creating process chain for the data upload of three info packages!
Two are master data IPs and one is transactional data IP. ( Requirement is to make single process chain for the master data and transactional data ).
Before transactional data upload, i had included the process delete indexes.
When i check the process chain, it says:
"process DROPCUBE variant is referenced but not in the chain "
May i know what is wrong with this process flow? i had actually done similarly in dev system it was not giving any error:
Please suggest me
Thanks,
Ravi

Hi Ravi,
Did you go for Meta chain, if not please try that. Be a bit clear on the question.
regards,
ashok.

Process Chain Activation Error

Similar Messages

Maybe you are looking for