Process chain alteration in BI 7 with new DTPs and Infopackages

Dear All,
For my BI system, the source system got replaced from 4.7 to ECC 6.0 system. All the datasources that were earlier part of old system were recreated in the new one too.
Now, I have a process chain in my production system which handles all the master data and transactional data loading. It makes use of the Infopackages(with respect to the old system) to load these data. Since I have new datasources, so I will be having new Infopackages too(with respect to the new system). I need to replace all the old infopackages with the newly created ones in the process chain. Is there any direct step or method for this or shall I have to create a new process chain from scratch ?
Regards,
Srinivas

hii
As soon as u click on the info pkg & right click on it it shows the number of options like to display the variant , exchange the variant, connect with, etc.
So go in the edit mode of process chain, right click on info pkg variant & select exchange variant, it opens a box having aal info pkgs, select the desired info pkg & save & activate the process chain
thanks
neha

Similar Messages

How to trigger process chain when datasource is loaded with new data? PUSH

Hi all,
Till now we use the pull method to load data in BW which is done manually......but we would like to work with the PUSH method where whenever new data is loaded in the datasource an event is triggered which inturn triggers the process chain...
how is this possible? can we do this on a timestamp on the datasource to trigger the event?
rgds,
wills

hi Geo,
Thanks for ur response. I appreciate it.
The case is slightly different. I am working on Bank analyzer data which is residing in a source system defined to load the results from the Results DataBase, a part of the Bank analyzer.
If it was R3 we have the standard calling procedures...but now the data in not in R3 but in Bank analyzer.
I am keen to look at some procedure to push the data automatically whenever an end user execution is done at the BA level into the BW.
ur help would be highly appreciated....
thks,
rgds.
wills

How to move the process chain from Unassigned node to a new node in 3.5?

Hi all,
I have created a new process chain in the development and it is falling under the Unassigned nodes. I want to move that process chain to an another node. but i am unable to do that
Can anyone let me know how to move the process chain from unassigned node. I have drag and dropped but still the same in BW 3.5 ?
Thanks
Poooja

Hello,
Try this....
Double click on your process chain. Via the menu select:
Process chain > Attributes > Display components
Select F4 (possible entries)
At the bottom of the window you will find a create icon
to make your own component.
After you created it, assign it to your process chain.
Don't forget to save the process chain.
Regards,
Sivaram

Iphoto crashes so tried the Alt start with new library and that worked. So now what? How to I get back to my pictures.

Iphoto crashes so tried the Alt start with new library and that worked. So now what? How to I get back to my pictures.

That shows you that iPhoto is working correctly and whatever issue you are having is based in your original library.
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.

In Photoshop Elements 12, is there a way to batch process all photos in a file with 'Auto Tone' and save the changes?

In Photoshop Elements 12, is there a way to batch process all photos in a file with 'Auto Tone' and save the changes?

Thank you, that was perfect!
Yoni

IPhone 4 - tried updating with new software and now it's asking me to plug it to iTunes. The problem is that my laptop is dead. Is there anything I can do now? Thank you for help!

iPhone 4 - tried updating with new software and now it's asking me to plug it to iTunes. The problem is that my laptop is dead. Is there anything I can do now?
I Don't know if I can turn it of or do I just leave it and take it to service?
I'd appreciate some advice!

Same thing happened here ~ tech guy at a local authorized Apple repair store said it had something to do with improper backup from which the restore would be made. Still have a phone that asks to be connected to Itunes but won't do anything else . . . frustrated.

Need help re-synching iPods with new computer and getting iTunes to...

Need help re-synching iPods with new computer and getting iTunes to recognize our iPods (it doesn't even recognize them when they're plugged in).
Hubby wiped my harddrive for me, so now I need to get everything back in proper places. I'm using windows XP and installed iTunes once again (I believe it's version 8). I also installed all of my iTunes songs. Now I need to know where to go from here. We have 3 iPods and I need to get them all synched once again. I know how to create different libraries for each of us, but I can't figure out how to get our songs back into our iTunes libraries. When I open iTunes and plug in an iPod, iTunes doesn't even show that an iPod is plugged in.
What do I do now to get each of our iPods synched with our own libraries?
TIA
Brandy

Thanks Zevoneer. The "Restart ipod service" worked and itunes is now recognizing my ipod! Hooray!
Okay, now how do I synch all of our ipods with our individual libraries (I don't want all of my kids' songs and vice versa)? We each have hundreds of songs on our ipods that we don't want to lose.
Thanks again!

I have iPhone 4S with new ios7, and panorama wallpaper doesn't work ! It let me shoose it, but it's not work, why?

I have iPhone 4S with new ios7, and panorama wallpaper doesn't work ! It let me shoose it, but it's not work, why?

These prices are for the U.S.
Out-of-Warranty Service
If you own an iPhone that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will service your iPhone for the Out-of-Warranty Service fee listed below.
iPhone model          Out-of-Warranty Service
iPhone 5          $229
iPhone 4S          $199
iPhone 4, iPhone 3GS,
iPhone 3G, Original iPhone          $149
A $6.95 shipping fee will be added if service is arranged through Apple and requires shipping. All fees are in U.S. dollars and are subject to local tax.
When setting up out-of-warranty service, Apple will request credit card pre-authorization for the maximum service fee listed above. This amount will be deducted from your credit limit. The final service fee we charge will be determined during testing and may be less than the service fee listed above.
Certain damage is ineligible for out-of-warranty service, including catastrophic damage, such as the device separating into multiple pieces, and inoperability caused by unauthorized modifications. However, an iPhone that has failed due to contact with liquid may be eligible for out-of-warranty service.
Apple reserves the right to determine whether or not your iPhone is eligible for Out-of-Warranty service. iPhones that are repaired or replaced have a 90-day limited hardware warranty or assume the remainder of your standard warranty or AppleCare service contract coverage, whichever is longer. Please see Apple's Repair Terms And Conditions for further details.

Last time my lack of an admin password to alter the desktop interfered with the download and now it says the invitation has already been accepted so I can't retry... The team administrator says there's no resend option. What do I do?

Last time my lack of an admin password to alter the desktop interfered with the download and now it says the invitation has already been accepted so I can't retry... The team administrator says there's no resend option. What do I do?

Moving this discussion to the Adobe Creative Cloud forum.

How can i delete contacts completely so that they don´t mix up with new addresses and groups?

how can i delete contacts completely so that they don´t mix up with new addresses and groups?
Alle geänderten Adressen oder Gruppen erscheinen immer wieder bei der Adresseingabe von mails.
Chaos!

Macbook 13.3 with new battery and new magsafe adaptor will not charge above 80% no indicator light on charger display states "not charging" while attached to charger

macbook 13.3 with new battery and new magsafe adaptor will not charge above 80% no indicator light on charger, display states "not charging" while attached to charger

rgregoryadams wrote:
macbook 13.3 with new battery and new magsafe adaptor will not charge above 80% no indicator light on charger, display states "not charging" while attached to charger
You'll want to reset your SMC (System Management Controller). Instructions are simple:
http://support.apple.com/kb/ht3964

Process chains problems : Working every day with error (red)

Hi All,
I have a next question, about process chains problem.
When I start my process chains immediate, then working without errors, but I want this process chains work every day and chainged properties, selected date/time and periodicaly (every day) but now it work with error.
How to I find problems? What are yours offers?
p.s. I see logs, but every day have diffence between errors.
Regards,
Mahir M. Quluzade

HI,
just check the time which you have given is OK or is overlappintg with some other job which is locking your table in process chain
or is colliding with attribute change run
or it fails because of lack of background processes.
There could be numerious reasons and you need to analyze the log for this.
But as you said the job is failing everday for different reasons..try to find the most common errors and try to remove it or mention that here.
Thanks
Ajeet

Process chain for updating a cube with last month's data everyday.

Hi everybody,
I need a suggestion on designing the process chain. I have the cube Zxx_xx. I will explain my requirement with an example. Suppose I uploaded the cube with data up to 201103. Each night in May, I want to upload the cube with April's data. So each night the previous request should be deleted. When May finishes, this time, each night I need to upload the cube with May's data. I handled everything except deleting the data from PSA. I need the data loaded in the cube stay at PSA. In this case the request including data till 201103, the request loaded for April, and finally in June, I need to see the request loaded for May. In the last step of the process chain I added the process for deleting PSA data choosing my infosource, but I have no option for deleting the requests where I have uploaded from same infopackage with same selections. Please help handling this situation.
thanks in advance.
Yasemin.

hi,
You can achieve this by loading the cube through two different DTP's.
DTP1 to have in the routine to pick data for month-2 i.e. in june it picks up April data.
DTP2 to restrict the month in routine to month-1 i.e. in june it picks up May data.
Now the design of process chain will be as follows:
process chain to have an step "Decision Between Multiple Alternatives "
in this decision step you can write formula to check if sy-datum is 01, first of every month.
if step: formula
( RIGHT( 2, Current Date ) = '01' )
On first of every month load for month-2 as well as month-1 and delete overlapping request for month-1. Variant described below. DTP1, DTP2 and then Delete overlapping request step
Else part of Decision Between Multiple Alternatives will be executed for all other days
load only month-1 and delete overlapping request from cube. DTP2 and then Delete overlapping request step.
in the pc there is variant "Delete overlapping request"
in that choose variant type DTP, give the technical name of DTP2 and save it.
this way the whole data loading will be automated and you need not intervene to delete data manually,
regards,
Arvind.

IM Init with new ECC and BI Production start up

Hi Everyone:
We have a new BI and new ECC going live. There will be a period of downtime in the production ECC box after conversions are done. This will be just prior to golive time. Is it ok to go ahead and do the 3 inits for IM with ECC to BI before the boxes are up and being used? We have done this before on another project without any problems but I just need some confirmation for my peace of mind on this. Thx

Hi,
In r/3 side ok when ever u rcoping from one systme to another for example if u take r/3 production to r/3 quality now the entire system will be copied as like production in r/3
now in bw quality is asconnected to r/3 quality once ur copied the logical system every thing cahnegd in quality r/3 but before copy the system is connected with different logical system.
hence it is better to chnage logical system after copying from production to quality.
now u take BW side,yes what u said is write it is tottlly coping system if u r refereshed the system automatically the production system will be copied in quality all delta process will come to quality
so once u r refreshed teh quality r/3 then it si better to once again replicate the qualty sasyte(after coping productionr/3) the do the copy of bw production to quality.
Thanks & Regards
Sathsih

Problems with new iMac and Adobe Creative Suite 2

Just wondering if anyone can help me out. I am a Graphic Design student and just bought Adobe Creative Suite2. I installed it on my new iMac, and it wouldn't open InDesign or Photoshop although I had no problems with Acrobat and Illustrator. A pop-up window stated that the program "unexpectedly quit". I have uninstalled and reinstalled three times and was on hold with Adobe Tech Support for three hours until I finally gave up. If anyone knows what's going on I would appreciate it!

I dragged the installer from the install disk to my desktop and was more successful in installing problem CS2 apps. Make sure to update everything as well. Some times it takes a restart to get the finickiness out of PS.

Process chain alteration in BI 7 with new DTPs and Infopackages

Similar Messages

Maybe you are looking for