Process Chain Assining for another source sytem

Hi Experts,
I have a quick question on process chain assining for another source sytem.
For Example. I have a Process chain with 10 Infiopackages. Letz say that Infopackage was assinged to one source system.
Now I wanna a create a new process chain which shoud be the replica of the existing process chain. I wanna to load the data for the same info packages thru another sources system. Can we do this or else we have to reassign the data source for new source system for every infosources.. Is this Possible.
Kindly guide me if there is any nother solution for this.
Warm Regards,
Aluri

Hi..
ABAP routines are in place at infopack level or at the Transformation level?
If its there at the Transformation level then there wont be any issues for ur redesigning..
if its there at the IP level then u need to copy those things in ur new IP as per the requirement and change the things accordingly..
and then design the process chain..
Assign points if this helps..
Thanks

Similar Messages

Reg : To view process chain flow for a cube

HI Experts,
I need to view process chain flow for a particular cube of sales distribution.Can you please tell me stps to perform .

Hi,
If the cube is already loaded then you can just to the infopackages which are loading it and in the infopackages you have option in the "schedule" tab to see which process chain it is loading.
if not then you will have to identify which data source is loading to the cube and check for the infopackge.
and I think the DTP will be in the same chain as well.
For DTP it is alreday mentioned by the others.
Thanks
Ajeet

Stopping Process Chain schedule for just one day...

Hi,
Our source systems and BI are getting a patch upgrade during this weekend and I need to stop all the Process Chains schedule for Friday night/ Saturday morning. Is there a simple way I can stop all the Process Chains from executing just for tomorrow instead of manually removing each PC from schedule and again putting them back on schedule on Saturday?
Thanks,
Sri.

Hi
You can reschedule them instead of de-schedule and schedule back.
1)open your process chain in rspc1
2) goto planning mode
3) right click on start --> display schedule job
4) select the job --> in menu bar --> click on first one from left --> change
here change the dates as per your requirement and save the job.
If you have any event based chains which are going to start after time based chains gets complete, no need to de-schedule as we are not going get trigger from time based chains.
I don't think so we have any program to de-schedule all the chains at a time.
Regards,
Venkatesh

Process chain variant for Acivaton of DSO error!!!

I have a data flow which has three data sources A B C ...A and B are connected to DSO X and C is connected to DSO Y,
DSO X and Y are again connected to DSO Z....DSO Z is connected to Final Target (Info Cube M).
Now Iam created a Process chain ...After Start Variant Iam running the Delta Info Packs for B and C (A's Delta Info pack runs in some other chain).
Then using Update from PSA for A B C ...using AND for A&B PSA to load in to DSO X...paralelly I used C PSA update in to DSO Y...Then used AND to load X& Y to Z...
When I run the process chain it runs good twice...we created a job in SM37 to run this job for every 4 hours....when I come back and see ...DSO X has data loaded and activated
But DSO Y loaded the data but activation doesnt took...When I see the Process chain logs its giving the following error msgs.
                                    - 1 -
      Request REQU_D3DR8GR9CPUIA56IMER47VWW7 (0000060949) is not
      available in data target. No PSA process possible.
Like this error each chain is showing error messages with the request numbers which are already activated in DSO.I donno when the req is already there as active why activation looking for that old req?
I fixed it by manually updating the DSOs and Cube...Can anybody let me know how to fix this in Process chain.
Thanks for the help in advance

I think you may have a timing issue, as when you perform this update manually there is no issue's.
I would suggest you load both ODS's then you activate the data on both, then you have the AND step once both have been activated to then feed the data to the subsequent Infoprovider.
This should resolve your issue.

ABAP program in process chain running under another user

Hi, gurus
I have a process chain that load three DSO in order to generate authorizations. I wish to add a new process at the end of this process chain which calls ABAP program RSSB_GENERATE_AUTHORIZATION. I wish to run this ABAP program under a different user rather than using ALEREMOTE, our general purpose load user. The user to run authorization generation must be a system user specially created for this purpose.
My question is: is it possible to define a different user to execute only a process (ABAP program) inside a process chain while the previous steps can be run by a general purpose load user?
Is there any other approach? What about separating it into two tasks? How to sincronize them, that is, how to run generation just after successful ending of the load process?
Thanks for ideas.
Fernando

Let us assume that you have two parts to this -
1. Process chain for Data Loads
2. Program for authorizations.
Schedule the authorization program in the background and have it run after a particular event - this way your authorization program is run with a specific user.
In your process chain put in a program to raise the event at the appropriate time so that the authorization program can run. The authorization program in the meanwhile will be runnnig and waiting for the event to occur.

ABAP process job ( BI_PROCESS_ABAP ) in process chain running for long time

Dear Experts,
We have an ABAP process job BI_PROCESS_ABAP in a process chain. This job is running for a very long time than previous run time.
Recently we had an ORACLE database upgrade from 9.2 to 10g.
From the very next day , we are having this problem.
And also previously this process-chain was under control of BASIS guys . they were using a tool called CRONACLE to schedule it. At the time of upgrade this tool was crashed and they asked us to schedule it in BW system instead.
Underlying program is using two custom tables.
one is having both primary & secondary indexes but the other table is having only primary index.
I am not sure whether we have secondary indexes on other table prior to upgrade or not.
Where must be the problem?...
At the time of upgrade BASIS has re-organized the table space along with database upgrade.
please help me...
Regards,
SRIKANTH

Please ask yr basis consultant to check the system parms.
Below i have listed down SAP recommneded system parms .
abap/heap_area_total 4000000000
abap/heap_area_dia 2000000000
abap/heap_area_nondia 2000000000
Also check in SM37 if any other jobs are running for long time, peventing the your job running.
Check the SM12 for locks or SM58

Problem in process chain running for 3 days

Hi Experts,
Please help me
We have process chain like below
1.     delete index
2.     full loads going 3 cubes (16 infopacs)
3.     loading to ods and then update to cube
4.     delete overlapping requests (16 infopac)
5.     create index
6.     aggregate filling
7.     delete PSA
Now the issue is, from last Saturday onwards
Process chains was still in Yellow status till date, so now, 1,2,3,4, are still running
In process chains, out if 16 infopacs, 12 are green, remaining 4 are stopped
And in ODS activation of ods data variant shows yellow, but when checked the data is activated, but not pushed to cube. When checked log it show u201Csystem exception error_messageu201D, so process terminated.
When we checked for shortdump,
It says u201Clocal time on the application server is incorrectu201D
Experts please let me know how to solve this and correct the load.

Hi Experts,
Thank u for your help,
I have done the steps manually yestarday, checked todays, still it is in yellow status.
let me explain the scenario,
The data is going to 3 cubes,
the process chain is designed like this,
1. initially delete index
2. full load to cube using 16 infopac and loading from (2)ODS to cube.
3. delete overlapping requests
4. create index (3 cubes)
5. fill aggregates (only one cube)
6. Delete PSA request
so now , chain is having problem at
1. data is loaded to ods
2. data activation (showing yellow, but when checked data is activated)
3. further update to cube (2 cubes) in process chain this is not started atall ( so y'day I've done manually)
4. out 16 infocpack, only 12 infopacs are green and remaining 4 are not started.
so yestarday I've manually schedule remaining 4 infopacs.
and deleted previour requests in infocube as they are full load, but I did'nt done create index and fill aggregate steps.
now the problem is , out of 3 cube report available request is present for 2 cubes, but for 3 cube this report request is not available, but QM status is green
please let me know how to proceed.
one small silly question, do i need to fill aggregate step to get this report available request.....please suggest.
Thanks & Regards,
Raghu

Process chain too slow in source system .

Good morning
during a process chain from BW 3.0B to a source system R3 46C i've seen that sometimes it goes very slow also with few data to load.
Here is the log of a BIREQU_* in R3 system:
29.10.2008 03:07:29 Job started
29.10.2008 03:07:29 Step 001 started (program SBIE0001, variant &0000000370248, user name ALEDABWP)
29.10.2008 03:07:30 Asynchronous sending of InfoIDOCs 2 in task 0001 (0 parallel tasks)
29.10.2008 03:07:30 DATASOURCE = ZYIFB_STATO_RICHIESTE_URGENTI
29.10.2008 03:07:30 *************************************************************************
29.10.2008 03:07:30 *           Current values of selected profile parameter                *
29.10.2008 03:07:30 *************************************************************************
29.10.2008 03:07:30 * abap/heap_area_nondia......... 2000000000                              *
29.10.2008 03:07:30 * abap/heap_area_total.......... 2000000000                              *
29.10.2008 03:07:30 * abap/heaplimit................ 100663296                               *
29.10.2008 03:07:30 * zcsa/installed_languages...... DEI                                     *
29.10.2008 03:07:30 * zcsa/system_language.......... I                                       *
29.10.2008 03:07:30 * ztta/max_memreq_MB............ 256                                     *
29.10.2008 03:07:30 * ztta/roll_area................ 6500000                                 *
29.10.2008 03:07:30 * ztta/roll_extension........... 3000000000                              *
29.10.2008 03:07:30 *************************************************************************
*29.10.2008 03:07:30 1 LUWs confirmed and 1 LUWs to be eletedwithFBSC2QOUT_CONFIRM_DATA*_
*29.10.2008 07:20:00 Call up of customer enhancement BWBTE_CALL_BW204010_E (BTE) with 4.330 records*_
29.10.2008 07:20:00 Result of customer enhancement: 4.330 records
29.10.2008 07:20:00 Call up of customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 4.330 records
29.10.2008 07:20:00 Result of customer enhancement: 4.330 records
29.10.2008 07:20:01 Asynchronous sending of data package 1 in task 0002 (1 parallel tasks)
29.10.2008 07:20:01 IDOC: InfoIDOC 2, IDOC no. 270934742, duration 00:00:00
29.10.2008 07:20:01 IDOC: Begin 29.10.2008 03:07:30, end 29.10.2008 03:07:30
29.10.2008 07:20:02 Through selection conditions, 0 records filtered out in total
29.10.2008 07:20:02 Asynchronous sending of InfoIDOCs 3 in task 0003 (1 parallel tasks)
29.10.2008 07:20:02 IDOC: InfoIDOC 3, IDOC no. 271010440, duration 00:00:00
29.10.2008 07:20:02 IDOC: Begin 29.10.2008 07:20:02, end 29.10.2008 07:20:02
29.10.2008 07:20:07 tRFC: Data package 1, TID = C0A800031827490800917395, duration 00:00:06, ARFCSTATE =
29.10.2008 07:20:07 tRFC: Begin 29.10.2008 07:20:01, end 29.10.2008 07:20:07
29.10.2008 07:20:07 Synchronous sending of InfoIDOCs 4 (0 parallel tasks)
29.10.2008 07:20:07 IDOC: InfoIDOC 4, IDOC no. 271010441, duration 00:00:00
The strange thing is the time gap form 3 to 7:20. what could be the problem?
Thanks
Nick
Edited by: Nicola Blasi on Oct 29, 2008 11:28 AM

Hi,
Check any exits are there in DataSource and where the data is picking whether the code is working fine or not.
Thanks
Reddy

Process chain - schedule for certain days

Hello all,
How can I schedule a process chain that :
-should run 3 times per day
-between the 8th and the 12 workingday of a month
Any sugesstions?
Thank you.

Maybe I cna help others with my solution.
So...
I made the chain to run 3 times per day as Debjani advidced me in this thread.
I put 3 jobs, at the hours I wanted, the period daily, without weekends and holidays.
I made a reports that tests the 18-th working day (for example) and some others:
REPORT Z_DAYS.
TABLES : TFACS.
DATA: GI_CURSOR TYPE CURSOR,
      GI_TABIX TYPE SY-TABIX,
      GT_TFACS TYPE TABLE OF TFACS.
DATA: TEXT(50) TYPE C,
      LEN TYPE I,
      IND TYPE I,
      POS TYPE I,
      CNT_ONE TYPE I,
      CNT_ZERO TYPE I,
      DAY_VAR TYPE I,
      IND_VAR(3) TYPE C.
DATA: EVENTID LIKE TBTCJOB-EVENTID.
DATA: EVENTPARM LIKE TBTCJOB-EVENTPARM.
FIELD-SYMBOLS: <GT_TFACS> TYPE TFACS.
DAY_VAR = SY-DATUM+6(2).
OPEN CURSOR GI_CURSOR FOR
*select data for factory calender Germany (01) and year 2009
SELECT * FROM TFACS
WHERE IDENT EQ '01' AND JAHR EQ SY-DATUM+0(4).
IF SY-SUBRC NE 0.
EXIT.
ENDIF.
MOVE 100 TO GI_TABIX.
DO.
FETCH NEXT CURSOR GI_CURSOR
   INTO TABLE GT_TFACS
   PACKAGE SIZE GI_TABIX.
IF SY-SUBRC NE 0.
    EXIT.
ENDIF.
*loop on internal table
LOOP AT GT_TFACS ASSIGNING <GT_TFACS>.
    TEXT = <GT_TFACS>-MON01.
    LEN = STRLEN( TEXT ).
    WRITE : 'len' , LEN.
    DO LEN TIMES.
      IND = SY-INDEX.
      POS = SY-TABIX.
      IND = IND - 1.
      IND_VAR = IND + 1.
      WRITE: / 'ind', IND_VAR.
      WRITE : 'pos'.
      WRITE POS.
      IF TEXT+IND(POS) = '1'.
*number of working days increases with 1
        CNT_ONE = CNT_ONE + 1.
        IF CNT_ONE EQ 8 AND ( DAY_VAR = IND_VAR ).
          WRITE : / '8th working day'.
          EXIT.
        ELSEIF CNT_ONE EQ 9 AND ( DAY_VAR = IND_VAR ).
          WRITE : / '9th working day'.
          EXIT.
        ELSEIF CNT_ONE EQ 10 AND ( DAY_VAR = IND_VAR ).
          WRITE : / '10th working day'.
          EXIT.
        ELSEIF CNT_ONE EQ 11 AND ( DAY_VAR = IND_VAR ).
          WRITE : / '11th working day'.
          EXIT.
        ELSEIF CNT_ONE EQ 17 AND ( DAY_VAR = IND_VAR ).
          WRITE : / '17th working day' COLOR 5.
          EVENTID = 'ZE_PROD'.
          EVENTPARM = 'ZEP_PROD'.
          CALL FUNCTION 'RSSM_EVENT_RAISE'
            EXPORTING
              I_EVENTID              = EVENTID
              I_EVENTPARM            = EVENTPARM
            EXCEPTIONS
              BAD_EVENTID            = 1
              EVENTID_DOES_NOT_EXIST = 2
              EVENTID_MISSING        = 3
              RAISE_FAILED           = 4
              OTHERS                 = 5.
         IF NOT SY-SUBRC IS INITIAL.
           WRITE:/ 'EVENT DID NOT START'.
         ENDIF.
          EXIT.
        ELSEIF CNT_ONE EQ 18 AND ( DAY_VAR = IND_VAR ).
          WRITE : / '18th working day' COLOR 5.
          EVENTID = 'ZE_PROD'.
          EVENTPARM = 'ZEP_PROD'.
          CALL FUNCTION 'RSSM_EVENT_RAISE'
            EXPORTING
              I_EVENTID              = EVENTID
              I_EVENTPARM            = EVENTPARM
            EXCEPTIONS
              BAD_EVENTID            = 1
              EVENTID_DOES_NOT_EXIST = 2
              EVENTID_MISSING        = 3
              RAISE_FAILED           = 4
              OTHERS                 = 5.
         IF NOT SY-SUBRC IS INITIAL.
           WRITE:/ 'EVENT DID NOT START'.
         ENDIF.
          EXIT.
        ENDIF.
      ELSEIF TEXT+IND(POS) = '0'.
*number of holidays days increases with 1
        CNT_ZERO = CNT_ZERO + 1.
      ENDIF.
    ENDDO.
    WRITE : /.
    WRITE: 'January :' COLOR 1, <GT_TFACS>-MON01.
ENDLOOP.
REFRESH GT_TFACS.
ENDDO.
WRITE / .
WRITE ' The number of working days is :'.
WRITE CNT_ONE COLOR 5.
WRITE / .
WRITE ' The number of holiday days is :'.
WRITE CNT_ZERO COLOR 7.
WRITE : / DAY_VAR.
CLOSE CURSOR GI_CURSOR.
When I am in the 18-th day, I raise an event. I test the year,the calender of the system and the month (January).
This report is called in the chain, as ABAP process.
Then, in my chain , I put a local chain , that starts after it receives the event 'ZE_PROD' and the parameter for it 'ZE_PROD'.
This event with parameter has to be created in SM62.
I hope this helps and thank you all for the advices.
PS: - the factory calender method seems not to be to good, because need special rights to create it and I don' t think it's possible to customize it (because the holiday calender has to be changed and I did not see how).
Edited by: EMI on Jan 27, 2009 4:21 PM

Process chain Logic for this scenario

HI,
We have a typical requirement that need to be implemented using a Process chain.
We need to Load data from R/3 to PSA,
then Load the data from the PSA into ODS1,
then execute an ABAP program,
then load the data from PSA into ODS2 (we cannot repull from R/3).
Can some one provide me an Idea on how to implement this. I am stuck with the idea on how to populate ODS2 from PSA after executing ABAP Program.
Thanks In advance,

Hi Krishnamohan,
I hope i m getting ur problem right.I think u can implement the below steps easily :
Step 1 : We need to Load data from R/3 to PSA,
Step 2 : then Load the data from the PSA into ODS1,
Step 3 : then execute an ABAP program,
U have options avaialable for each of them in process chains.
Now coming to your problem.
Step 4 : then load the data from PSA into ODS2 (we cannot repull from R/3).
i guess ur Abap program makes some changes in the Data of PSA which u then want to load in the ODS2.
What u can do is create 2 infopackages and inside infopackages in the data targets tab select ODS1 in the first infopackage and uncheck ODS2 , likewise in the 2nd infopackage select ODS2 and uncheck ODS1.
U can execute the first infopackage in the process chain , then ur abap program and then
In process chain and in Process types u have something called "Read PSA Data and Updata Data Target".
select that process type , specify the 2nd infopackage name and get it executed.
Hope it helps.
Thanks and Regards,
Parth.

Process Chain Server for Scheduling

Hello,
I would like to schedule my process chains such that I avoid any deadlocks from not enough background processes being available and other kinds of resource failures. I have been trying to schedule certain chains on different servers logically, but if an app server changes unexpectedly then the loads fail. It seems that hard coding chains to servers is not an ideal solution. What is the best option for server scheduling when you schedule a process chain? Is there an option that gives some sort of load balancing? Should you just leave the server field blank? What about the server group option?
Thanks,
TMS

leave the server field blank.
the load balancing feature will take care of distribution of jobs automatically

Process Chain Component for Deleting Openhub Destination

I have an openhub that places the results of a DSO on AL11.
I created / scheduled a process chain for updating the file.
I'd like to modify the process chain and add a step to delete the file on AL11 before I run the DTP.
Is this possible?
Mike

Hi
Can achieve this with ABAP Process -- by calling FM -- EPS_DELETE_FILE (or) Command delete dataset file.
Basis Team can also help via writing Unix script which can be executed via SM49 to delete the File.
To access the file..
*-c list in time order.
CONCATENATE 'ls -c' p_fin INTO w_list_commandin
SEPARATED BY space.
CONCATENATE w_list_commandin '/.' INTO w_list_commandin.
CALL unix list command - will populate itab_file_list ITAB
CALL 'SYSTEM' ID 'COMMAND' FIELD w_list_commandin ID 'TAB'
FIELD it_file_list-sys.
To delete..
Remove the file once it is processed
CONCATENATE 'rm' it_file_list-file_name
INTO w_runcmd SEPARATED BY space.
send command to unix to move item file
CALL 'SYSTEM' ID 'COMMAND' FIELD w_runcmd.
Hope it helps

Process Chain Message for Run completion

Dear experts,
In our system the Process chains and as they complete processes, there are some messages, such as completion of run for master data or hierarchies...
Then when I run the PC, if I don't click to confirm the messages, the PC sometimes times out...
I would like to NOT display thoses messages.
How can I change the settings for that???
Alice

Dear Pravender,
What do you mean by block?
The start event or the attrib. change box?
if i right-click on them both I see:
"Display Variant...
Exchange variant...
Display all jobs
Create message...
Debug Loop...
Remove process"
I don't see "maintain message."
I think you mean that I should I click "create message..." and change successful to error.
If that correct?
Alice

Process Chain Failed for Master Data

Hi All,
Process Chain has failed for vendor attributes, when i checked the error no message has shown, and when i check the vendor attribute , there request in RED which is loaded on sunday(it got failed on sunday) again failed today.
I repeated the Process Chain again failed, and i deleted the request which in generated yesterday (sunday) and deleted request from PSA (delta) also (which is RED) trying to Load again It is saying that Last delta update was Incorrect There no new update is possible
It seems there is no load in (sunday) that is why it is giving that message.
Could you please let me know how this problem will be solved.
Thank you,
Teena

Hi,
You need to mark the failed request as "red". Then go to the infopackage and rerun. If it still fails, check the error message in the monitor. In the monitor, click on the failed load, go to the status tab and then click on the error message button. It will tell you the exact error.
Most probably, the error is datasource does not support mode R. (Repeat of last delta). In which case, you need to reinitialiize the datasource. Most master data datasources do not support repeat of last deltas. Hence if the delta's fail, then you need to do a reinitialization.
Hope this helps.
Regards.

Process Chain Failed for Perticular day, want to take load from R/3 for day

Hi Experts,
While monitoring the process chain i found that on 16 Nov2010 the schedule got failed then i checked but that was due to rfc connection to R/3 failed then again i repeated the process in RSPCM. But toady in the morning when i was checking i found that for 17 nov scheduled got run successful but when i drilled down on date for 16th data but it was failed for 16. Now please guid me how to bring the data for 16nov from R/3. My process chain contains both Master Data/ Transaction Data and Deltas / Full loads ???

Hi,
As you have mentioned in your post, the process chain for 17th has finished successfully, can you confirm if all the dataload also finished successfully?
If the dataload also has finished successfully, then ther is not much to be done from your side. Pplease note below points
1. For Delta Loads- No need to worry about them. For standard datasources, the system would have automatically fetched all the deltas since your last successful delta load. For generic datasources as well, based on previous delta pointer in RSA7, all the delta records would have got fetched.
2. For full dataloads- Check the selection criteria in your infopackages. If its based on date, then you would have to do dataload again.
The selection criteria for this dataloads should include the dates for 16th & 17th dataload. Everything else should be fine.
Else, if your dataload did not finish succesfully on17th, though the process chain has finished. You need to do below
1. For all the delta loads- Carry out Repeat Delta loads. This would fetch all the deltas missed. After this load, all the deltas would continue to come normally.
2. For full loads, perform same as mentioned in point 2 above.

Process Chain Assining for another source sytem

Similar Messages

Maybe you are looking for