Process chain controls

can any one tell me please, which tables holds the process chain details and is there any indicator in the table which explains 'whether the process chain is scheduled or removed from the schedule'.

hi priya...
The main program running all the steps of your process chain is RSPROCESS.
After a step is run, it calls FM RSPC_PROCESS_FINISH, which updates RSPCPROCESSLOG. It should update the processlog table immediately (or almost). It may be delayed in case locking is taking some time (due to concurrent processes).
I am not sure if there is a collector job that updates this table, likely not.
pls check the following Tables:
RSPCLOGCHAIN
RSPCPROCESSLOG
RSREQDONE,
i think this will help you out....
further queries..use this link...
http://sap.ittoolbox.com/groups/technical-functional/sap-bw/process-chain-consolidated-log-overview-834561#
regards...

Similar Messages

  • Process chains controlled by events!

    Hi Friends.
    I have one process chain at APO side and want to execute another process chain at BI side only when the process chain at APO side gets executed successfully.
    Since <b>APO and BI are two different systems</b>, how can i trigger the process chain at BI side once the process chain at APO side finishes its job?
    your help will be appriciated in terms of points.
    Manmit

    Thanks Geo,
    Sounds like a good description. I have one more question:
    1. created Function Module in BW lets say: FM_BW
    2. created ABAP Prog in APO lets say : ABAP_APO
    I will have to trigger this abap prog ABAP_APO at APO side through the process chain at APO side. How can i trigger this abap prog at APO side through this process chain?
    once this abap prog gets triggered at APO side which will call the Function Module FM_BW at BI side. Now this Function module should trigger my process chain at BI side. How does this Function module trigger my process chain at BI side. I can see in the code (Attached with note) that it takes Event ID to trigger a event. How will i know this event id associated with Process Chain at BI side?
    I have assigned points for the help so far..
    Thanks,
    Manmit

  • Process chain and Control M

    Hi Gurus
    We are designing process chain for our BW solution.
    We have identified the dependancies of various loads which includes flat file loads and loads from R/3.
    Now we would like to control ERP and BW jobs by Control M .
    I have the following questions:
    1. Which portion of BW process chain do we need to plug in to Control M. ? Do we need to connect the Meta chain to control M or different process chains to Control M?
    2.When we create Process chain for BW, what is the best practice? Is it good to create small chains and connect them via Meta chain? or we have to create small chains only?
    3. Can we include R/3 extraction Jobs and V3 Jobs in our BW process chain? so that they will trigger when we run the process chain?
    4. If we decide to run V 3 jobs after every half an hour on R3 side then how often we have to extract data to BW? and how to catch correct delta without missing single record?
    I would appreciate if you can help me with your knowledge.
    Thanks
    Kris

    Hi Kris,
    Control M is a third party scheduling tool provided by BMC software.
    1) You have option to either include a meta chain or individual chains in Control  M .
    2) It depends on how your data is extracted. If you have any dependecy jobs on sourcre system, then it is better to create small process chians and include them along with your dependecy jobs in Control M
    3)you can include R/3 dependency jobs and V3 jobs in Control M. Once those jobs are finished you can run BW process chains via Control M.
    4)You have several scheduling options availalbe in control M to take care of your BW and R/3 jobs.
    V3 jobs collect data from R/3 application tables and fill R/3 delta queue(RSA7). when you run BW process chain it will collect all the data available from R/3 delta queue.
    If both jobs are running at same time, then it is better to apply some wait time on BW jobs(in process chians).
    hope this helps

  • Infopackage and process chain status

    Hello expert,
    I am new in BW technology and I need some help...
    Well I have created a process chain in order to load data into infoprovider. This process chain is running everyday in production system, (it's a tipical PC: delete PSA request, run infopackage, run DTP....)
    I have checked the last status of the process chain and it's yellow since two days ago... It was due a communication error between ERP and BW system, therefore (for some reason), the infopackages started but never ended (always yellow status).
    So, my questions are:
    1.- Is there any configuration for the infopackage to prevent yellow status (for more than X time)?
    2.- Could we control it in a process chain?
    Thank you and best regards

    Hi,
    We can configure for infopackage incase of no records found however you can setup for time linmit.
    You can set the status the request is to receive per InfoPackage in the Scheduler, via Scheduler   Warning Handling. This setting overrides the system-wide setting.
    Check the below link for more info :
    http://help.sap.com/saphelp_nw04/helpdata/en/80/1a65cfe07211d2acb80000e829fbfe/frameset.htm
    Regards,
    Satya

  • Error in process chain DTP not executed

    Hello,
    Sorry tried to find the most appropriate forum, not sure it is the one. Am a newbee
    In a process chain we have a event passing information from one cube to another that stops and do not go until the end of the job. But it doesn't happen all the time, which is rather strange.
    Here is the log when everything goes well:
    2007-11-16                                                    Dynamic List Display                                                           1                              
         Job log     Job log     Message text uncoded     Msg.typ     Message ID     Msg.no.
         16/11/2007     10:46:44     Job started     S     0     516
         16/11/2007     10:46:44     Step 001 started (program RSPROCESS, variant &0000000006327, user ID ALEREMOTE)     S     0     550
         16/11/2007     10:46:52     Performing check and potential update for status control table     S     RSM1     490
         16/11/2007     10:46:52     Performing check and potential update for status control table     S     RSM1     490
         16/11/2007     10:46:53     Status 'Executable' (user ALEREMOTE)     S     RSBK     223
         16/11/2007     10:46:53     Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BIDTPR_16322_1 with ID 10465300     S     RSM     703
         16/11/2007     10:46:58     Status 'Active' (user ALEREMOTE)     S     RSBK     223
         16/11/2007     10:46:59     Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BIDTPR_16322_1 with ID 10465800     S     RSM     703
         16/11/2007     10:46:59     Job finished     S     0     517
    And here is the one when it stops:
    2007-11-16                                                    Dynamic List Display                                                           1                              
         Job log     Job log     Message text uncoded     Msg.typ     Message ID     Msg.no.
         16/11/2007     10:48:27     Job started     S     0     516
         16/11/2007     10:48:27     Step 001 started (program RSPROCESS, variant &0000000006327, user ID ALEREMOTE)     S     0     550
         16/11/2007     10:48:35     Performing check and potential update for status control table     S     RSM1     490
         16/11/2007     10:48:36     Performing check and potential update for status control table     S     RSM1     490
         16/11/2007     10:48:36     Status 'Executable' (user ALEREMOTE)     S     RSBK     223
         16/11/2007     10:48:36     Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BIDTPR_16328_1 with ID 10483600     S     RSM     703
         16/11/2007     10:48:41     Status 'Active' (user ALEREMOTE)     S     RSBK     223
         16/11/2007     10:48:42     EXTRACTION OF DATAPACKAGE 000001     S     RSAR     51
         16/11/2007     10:48:42     Processing of data package 000001 started     S     RSBK     244
         16/11/2007     10:48:43     All records forwarded     S     RSM2     730
         16/11/2007     10:48:44     SQL: 16.11.2007 10:48:44 ALEREMOTE     I     DBMAN     99
         16/11/2007     10:48:44     ALTER TABLE "/BIC/FZHREMPL" ADD PARTITION     I     DBMAN     99
         16/11/2007     10:48:44     /BIC/FZHREMPL0000000430 VALUES LESS THAN     I     DBMAN     99
         16/11/2007     10:48:44     (0000000430 ) TABLESPACE "PSAPCAR"     I     DBMAN     99
         16/11/2007     10:48:44     SQL-END: 16.11.2007 10:48:44 00:00:00     I     DBMAN     99
         16/11/2007     10:48:44     SQL: 16.11.2007 10:48:44 ALEREMOTE     I     DBMAN     99
         16/11/2007     10:48:44     ALTER TABLE "/BIC/FZHREMPL" MODIFY PARTITION     I     DBMAN     99
         16/11/2007     10:48:44     /BIC/FZHREMPL0000000430 REBUILD UNUSABLE LOCAL     I     DBMAN     99
         16/11/2007     10:48:44     INDEXES     I     DBMAN     99
         16/11/2007     10:48:44     SQL-END: 16.11.2007 10:48:44 00:00:00     I     DBMAN     99
         16/11/2007     10:48:44     SQL: 16.11.2007 10:48:44 ALEREMOTE     I     DBMAN     99
         16/11/2007     10:48:44     ANALYZE TABLE "/BIC/FZHREMPL" PARTITION (     I     DBMAN     99
         16/11/2007     10:48:44     /BIC/FZHREMPL0000000430 ) ESTIMATE STATISTICS     I     DBMAN     99
         16/11/2007     10:48:44     SAMPLE 10 PERCENT     I     DBMAN     99
         16/11/2007     10:48:44     SQL-END: 16.11.2007 10:48:44 00:00:00     I     DBMAN     99
         16/11/2007     10:48:45     Job BIDTPR_16328_1 no longer exists     S     BT     127
         16/11/2007     10:49:45     Technical status 'Green' (user ALEREMOTE)     S     RSBK     224
         16/11/2007     10:50:45     Status transition 8 / 8 to 8 / 8 completed successfully     S     RSBK     222
         16/11/2007     10:50:46     Overall status 'Green' (user ALEREMOTE)     S     RSBK     225
    Can anyone help and tell me where i could search to improve performance...I don't want a plain vanilla answer but some leads to an answer would already be very helpfull
    Thanks a lot in advance

    Dear friends
    I am also facing the same issue :
    Below is the job log when the DTP is completed successfully,
    Job started
    Step 001 started (program RSPROCESS, variant &0000000391261, user ID BWREMOTE)
    Performing check and potential update for status control table
    Status 'Executable' (user BWREMOTE)
    Status 'Active' (user BWREMOTE)
    Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BIDTPR_335754_1 with ID 06532200
    Job finished
    But when its yellow forever or failed, I get the below Job log
    Job started
    Step 001 started (program RSPROCESS, variant &0000000391306, user ID BWREMOTE)
    Performing check and potential update for status control table
    Status 'Executable' (user BWREMOTE)
    Status 'Active' (user BWREMOTE)
    EXTRACTION OF DATAPACKAGE 000001
    EXTRACTION OF DATAPACKAGE 000002
    Job finished
    Can anyone help, is this happening because there is no resouce available to schedule "RSBATCH_EXECUTE_PROZESS".
    Any help is appreciated!
    Regards
    MultiABAP

  • Interview questions in process chain

    hi 
       cany any one send me possible interview questions in process chain and errors with answer.
    thanks in advance
    pradeep

    Hi Pradeep
    1.Procedure for repeat delta?
    You need to make the request status to Red in monitor screen and then delete it from ODS/Cube. Then when you open infopackage again, system will prompt you for repeat delta.
    also.....
    Goto RSA7->F2->Update Mode--->Delta Repetation
    Delta repeation is done based on type of upload you are carrying on.
    1. if you are loading masterdata then most of the time you will change the QM status to red and then repeat the delta for the repeat of delta. the delta is allowed only if you make the changes.
    and some times you need to do the RnD if the repeat of delta is not allowed even after the qm status id made to red. here you have to change the QM status to red.
    If this is not the case, the source system and therefore also the extractor, have not yet received any information regarding the last delta and you must set the request to GREEN in the monitor using a QM action.
    The system then requests a delta again since the last delta request has not yet occurred for the extractor.
    Afterwards, you must reset the old request that you previously set to GREEN to RED since it was incorrect and it would otherwise be requested as a data target by an ODS.
    Caution: If the termianted request was a REPEAT request itself, always set this to RED so that the system tries to carry out a repeat again.
    To determine whether a delta or a repeat are to be requested, the system ONLY uses the status of the monitor.
    It is irrelevant whether the request is updated in a data target somewhere.
    When activating requests in an ODS, the system checks delta repeat requests for completeness and the correct sequence.
    Each green delta/repeat request in the monitor that came from the same DataSource/source system combination must be updated in the ODS before activation, which means that in this case, you must set them back to RED in the monitor using a QM action when using the solution described above.
    If the source of the data is a DataMart, it is not just the DELTARNR field that is relevant (in the roosprmsc table in the system in which the source DataMart is, which is usually your BW system since it is a Myself extraction in this case), rather the status of the request tabstrip control is relevant as well.
    Therefore, after the last delta request has terminated, go to the administration of your data source and check whether the DataMart indicator is set for the request that you wanted to update last.
    If this is NOT the case, you must NOT request a repeat since the system would also retransfer the data of the last delta but one.
    This means, you must NOT start a delta InfoPackage which then would request a repeat because the monitor is still RED. For information about how to correct this problem, refer to the following section.
    For more information about this, see also Note 873401.
    Proceed as follows:
    Delete the rest of this request from ALL updated data targets, set the terminated request to GREEN IN THE MONITOR and request a new DELTA.
    Only if the DataMart indicator is set does the system carry out a repeat correctly and transfers only this data again.
    This means, that only in this case can you leave the monitor status as it is and restart the delta InfoPackage. Then this creates a repeat request
    In addition, you can generally also reset the DATAMART indicator and then work using a delta request after you have set the incorrect request to GREEN in the monitor.
    Simply start the delta InfoPackage after you have reset the DATAMART indicator AND after you have set the last request that was terminated to GREEN in the monitor.
    After the delta request has been carried out successfully, remember to reset the old incorrect request to RED since otherwise the problems mentioned above will occur when you activate the data in a target ODS.
    What is process chain and how you used it?
    A) Process chains are tool available in BW for Automation of upload of master data and transaction data while taking care of dependency between each processes.
    B) In one of our scenario we wanted to upload wholesale price infoobject which will have wholesale price for all the material. Then we wanted to load transaction data. While loading transaction data to populate wholesale price, there was a look up in the update rule on this InfoObject masterdata table. This dependency of first uploading masterdata and then uploading transaction data was done through the process chain.
    What is process chain and how you used it?
    A) We have used process chains to automate the delta loading process. Once you are finished with your design and testing you can automate the processes listed in RSPC. I have a real time example in the attachment.
    for more detail
    Collecting Process Chain Statistics
    /thread/235805 [original link is broken]
    Advice regarding process chains
    creation of process chains
    Message was edited by:
            Kalpana M

  • ABAP process job ( BI_PROCESS_ABAP ) in process chain running for long time

    Dear Experts,
    We have an ABAP process job  BI_PROCESS_ABAP  in a process chain. This job is running for a very long time than previous run time.
    Recently we had an ORACLE database upgrade from 9.2 to 10g.
    From the very next day , we are having this problem.
    And also previously this process-chain was under control of BASIS guys . they were using a tool called CRONACLE to schedule it. At the time of upgrade this tool was crashed and they asked us to schedule it in BW system instead.
    Underlying program is using two custom tables.
    one is having both primary & secondary indexes but the other table is having only primary index.
    I am not sure whether we have secondary indexes on other table prior to upgrade or not.
    Where must be the problem?...
    At the time of upgrade BASIS has re-organized the table space along with database upgrade.
    please help me...
    Regards,
    SRIKANTH

    Please ask yr basis consultant to check the system parms.
    Below i have listed down SAP recommneded system parms .
    abap/heap_area_total 4000000000
    abap/heap_area_dia 2000000000
    abap/heap_area_nondia 2000000000
    Also check in SM37 if any other jobs are running for long time, peventing the your job running.
    Check the SM12 for locks or SM58

  • Process chain to trigger automatically after file arrives in AL11.

    Hi All,
    There is a text file(.txt) which comes from mainframes team every Sunday between 11 AM to 6 PM and gets placed in AL11 inbound directory following which we manually trigger a process chain which uses this file.
    The requirement is that this chain should trigger automatically after the file arrives in AL11 in BW.
    Is it necessary for the mainframe team to send another control file or some other file in addition to the text file to trigger this process chain..?
    Is there any other way the process chain can be triggered in BW without any changes required from the mainframe team.
    Additional information:
    Also I came to know that this can happen through some system command statements using SM49 we can schedule this chain.
    Else can some ABAP Program code be used to make this process automatic?
    Please help me.

    Hi,
    You can do the following, in your process chain change the start variant and make it event dependent. Now you can do the following,
    1) Create a table in SE11 which will have fields like Process chain name and execution date as primary fields. This table will be used further for checking purpose.
    2) Now create a ABAP program as shown in below given article, in this program in addition to raising an event you will have to read the file from app server.
    3) If program can read file from app server means you will raise an event and make entry in above table for preventing further execution of process chain. If program can't read file from app server then program will simply end without doing anything.
    4) Now you can schedule this program after every hour or 30 min. as per your requirement, the program will first check if the process chain execution entry exists in the above 'Z' table or not. If entry exists means the process chain has been already executed and the program will be terminated.
    5) You can use FM to read data from app server. You need to be careful while placing file on app server, because it has to be different naming convention or something else to identify that the current day file is available.
    [http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a01cc44a-5aac-2d10-3eaa-a3bbf645d25c?QuickLink=index&overridelayout=true]
    Regards,
    Durgesh.

  • Info Spoke - Process Chain - OS Command usage help

    I am new to BW. My requirement is to extract the master data off of BW data targets on a weekly basis and ftp the files onto a different server.
    To meet this requirement, I am planning to create InfoSpoke(s), put it in a Process chain and using the OS Command ftp the files to different server.
    Is this the right way to do it or are there any better ways? If it is, I need help on where to give the target server name, user_id and PSW in the OS Command variant of Process Chain.
    Also, is it possible to schedule a Infospoke directly from the scheduler (Auotsys...) and still execute weekly/monthly?
    Thanks for your help in advance
    RK

    That's correct.  You'll define the command under the general services tab in the process chain transaction (It's labeled OS Command and is a silver circle thing with a blue dot in it).
    When you drag it into the process chain it will ask for a varient.  In the System Command field for this varient is where you'll define the actual command. (little pencil button next to it).  At this point you can call a script that does the copy or call an actual command that does the copy. 
    Might be easier to control with a script that does the work but if you want to call rcp/scp, the os command will be rcp and parameters will be the filename, etc.  If it's a script then you'll just enter the name of the script in the os command field.
    Hope this helps.
    -bill

  • How to test Process chain in BW

    Hi Guys,
                  Can U give me some introduction to Process chains and how to test it in BW 3.5
    Thanks for Ur time.
    Cheers
    Senthil

    Hi,
    A process chain is a defined sequence of interdependent processes required to perform acomplex task in an SAPBW environment. Data maintenance tasks in SAPBW are notrestricted to uploading data. Aggregate rollups, index maintenance, master data and ODS activation, and a variety of other jobs are required to update data, guarantee best-possible performance, and maintain data integrity. Typical SAPBW implementa-tions have complex interdependent networks of jobs in place that run every night, week,or month.Previous releases of SAPBW did not provide an integrated solution for scheduling and monitoring those kinds of job networks. This has changed with the introduction of process chains in release 3.0. Process chains allow you to define complex job networks consisting of standard SAPBW jobs, as well as custom jobs; they support visualizing the job network and centrally controlling and monitoring the processes.
    (from "Mastering the SAP BIW")
    New Features in BI 2004s Process Chains
    /people/mallikarjuna.reddy7/blog/2007/02/08/new-features-in-bi-2004s-process-chains
    Designing
    /people/vishvesh.bahirat/blog/2006/11/29/bw-process-chain-design
    Process chain creation in 2004s - step by step
    /people/juergen.noe/blog/2008/01/11/process-chain-creation--step-by-step
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/events/sap-teched-03/using%20process%20chains%20in%20sap%20business%20information%20warehouse
    Testing
    We need to test the PC chains.
    You need to test if the extractions are working fine, data is getting loaded into targets, post load activities like activation, rollup, compression etc are successfull etc.
    We schedule / trigger the chains and monitor them. We ensure that all the process types are happening successfully.
    One major area we concentrate on is to identify dependcies in the chain. This will ensure less erros and also reduce chain timings by a great extend. Dependencies should be kept to a minimum whereever possible.
    Also in cases where we use events/third party shceduling tools to trigger BW chains we check that out.
    Thanks,
    JituK

  • How to change process chain in SAP APO, in RSCP tcode.

    HI SAP APO Experts
    I am from SAP ABAP background, I need to change a 'AND' operator in process chain in RSCP tranaaction in SAP APO.
    I dont have any idea how to change process chain.
    Could you please help me how to change process chain in SAP APO in RSCP tcode.
    Appreciate your help or comments.
    Sandeep..

    Hi Sandeep,
    The t-code RSCP does not exist in SAP APO.  The correct t-code is RSPC. 
    Step 1:- In RSPC t-code, select the process chain which you need to change. 
    Step 2:- Double click on it. 
    Step 3:- It will display the various programmes attached to the process chain.  Go to change mode by clicking on the change indicator (Control + F9)
    Step 4:- Select the programme area where you need to do the correction or change.  Double click on it.
    Step 5:- It will take you to the programme and its selection contents.  Make the relevant changes.  You can directly carry out the change in se38 also if there is variant kind of changes for that particular programme.
    Step 6:- Once the changes are done, save the changes and press F3 button which will take you to the home page of the process chain
    Step 7:- Save again so that the change in the programme alongwith the process chain will get saved.
    Regards
    R. Senthil Mareeswaran.

  • Why the process chain always run twice when triggered from R3?

    I run a program from R3 by calling the remote function 'RSSM_EVENT_RAISE' on BW to trigger an event and in turn the event on BW bring up the running of a process chain.  But whenever I run the program on R3 to bring up the running of the process chain, I find the process chain always run twice at the same time.  Does anybody knows the answer? 
    And also I would like to know the functionalities of the two picture buttons "Activate" and "Activate and Schedule" in process chain.  In which case the "Activate" button should be used and in which case, the "Activate and Schedule" button should be used?   If we click the Start variant of a process chain, then click "Change Selections" button which bring up the window "Start Time" where the buttons "Immediate", "Date/Time", "After job", and "After event" are listed at the top.  If we modify at any of the above buttons, then after save this modification, we will have to click "Activate and Schedule" button to make it work, right? 
    Thanks a lot and everyone's idea is greatly appreciated!

    Kevin, make sure there is only one job scehduled for the Start Process of your Process Chain.  If you bring up the Process Chain (not the log view), right click on the Start Process and select "Displaying Scheduled Job(s)...".  There should only be one scheduled job with name BI_PROCESS_TRIGGER.  If there is more than one, then when triggered, it would execute more than once at the same time.  If there is only one job, then maybe your R/3 program is triggering the event more than once? 
    As far as the Start conditions for the Start Process, it works off the same principals as a scheduled job.  These start conditions determine when or how the Process Chain is to be executed.  You also have control over frequency.  These start conditions determine the scheduling of the Start Process of your Process Chain.
    When you schedule a Process Chain, a separate scheduled job is created for "each" process in the Chain.  BW controls the triggering of these jobs based upon how the processes in the Chain are linked.  All the jobs associated with Process Chains have strict naming conventions and all begin with BI_PROCESS_...  If you use SM37 to view all jobs that begin with BI_PROCESS_ you will find alot of scheduled jobs associated with your process chains.  Each job represents one of the processes within your process chains. 
    Does this help?
    Another tip might be to trigger the event manually in BW (use tx SM64).  If the process chain executes twice again, then maybe there is a separate scheduled job in BW that triggers the process chain that is triggered by the same event as the start process of the process chain.
    Message was edited by: George Shannon

  • Error in Process Chain for DTP- Job not finished

    Hi Experts,
    We have an issue with one of our process chains. When we execute the chain manually, there is no problem. BUt if we schedule the chain, issues arise. the last part of the chain is DTP. But the job doesnt finished even if the DTP step si already green. Locks occur for the DTP and the infoobject. When we look at the job log in SM37, it is still active. But this should not take a long time, since if we execute it manually it is ok.
    Pleas help experts

    Guys, I am also facing the same issue.
    When DTP is completed successfully, it has the job log blow :
    Job started
    Step 001 started (program RSPROCESS, variant &0000000391261, user ID BWREMOTE)
    Performing check and potential update for status control table
    Status 'Executable' (user BWREMOTE)
    Status 'Active' (user BWREMOTE)
    Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BIDTPR_335754_1 with ID 06532200
    Job finished
    When it fails or remain yelllow for long time and then turn into red.
    Job started
    Step 001 started (program RSPROCESS, variant &0000000391306, user ID BWREMOTE)
    Performing check and potential update for status control table
    Status 'Executable' (user BWREMOTE)
    Status 'Active' (user BWREMOTE)
    EXTRACTION OF DATAPACKAGE 000001
    EXTRACTION OF DATAPACKAGE 000002
    Job finished
    The question is, why the program  RSBATCH_EXECUTE_PROZESS is not scheduled.  Is it because there is no free resource? Or poor response from SAP ECC?
    Finally what does "EXTRACTION OF DATAPACKAGE 000001" mean? Its not scheduled?
    Regards
    MultiABAP
    Edited by: MultiABAP on Oct 6, 2010 10:32 AM

  • Error in Process chain for CO-PC

    Dear ALL
                I am facing one problem.I have a process chain for CO-PC cost object controlling.In that after start process i have another process chain Manufacturing order.After this other processes are there.Upto 4th march i have the delta running fine.After that the manufacturing order PC is failing when i open the process chain i find its failing in DTP section.
    Now what i did is i run the DTP for manufacturing order actually it consist of ATTRIBUTES AND TEXTS.After finishing i find in manage that the records are transferred but 0 records added and when i find the log its saying
    @5C@     0PRODORDER : Data record 1 ('000001000000 ') : Duplicate data record     RSDMD     191     
    Thanks in Advance

    Hi,
    Check below these links for more business knowledge about CO-PC.
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/COPCIS/COPCIS.pdf
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/fb07ab90-0201-0010-c489-d527d39cc0c6.
    Regards,
    Praveena.

  • Authorizations setting for running the process chain

    Hai
    Iam planning to run the process chain for loading the data into ODS. But i dont have authorization for it.
    so what are the authorizations i need to run the process chain in my system. And how can i set all those authorizations to my user-id.  I have all authorization rights .
    Pls let me knw
    kumar

    Hi,
    Authorizations for Process Chains
    Use
    You use authorization checks in process chain maintenance to lock the process chain, and the processes of the chain, against actions by unauthorized users.
    ·        You control whether a user is allowed to perform specific activities.
    ·        You control whether a user is allowed to schedule the processes in a chain.
    The authorization check for the processes in a chain runs when the system performs the check. This takes place upon scheduling or during synchronous execution. The check is performed in display mode. The check is performed for each user that schedules the chain; it is not performed for the user who executes the chain. The user who executes the chain is usually the BI background user. The BI background user automatically has the required authorizations for executing all BI process types. In attribute maintenance for the process chain, you can determine the user who is to execute the process chain.
    See also: Display/Maintenance of Process Chain Attributes ®  Execution User.
    Features
    For the administration processes that are bundled in a process chain, you require authorization for authorization object S_RS_ADMWB.
    To work with process chains, you require authorization for authorization object S_RS_PC. You use this authorization object to determine whether process chains can be displayed, changed or executed, and whether logs can be deleted. You can use the name of the process chain as the basis for the restriction, or restrict authorizations to chains using the application components to which they are assigned.
    Display/Maintain Process Chain Attributes
    Use
    You can display technical attributes, display or create documentation for a process chain, and determine the response of process chains during execution.
    Features
    You can display or maintain the following attributes for a process chain:
    Process Chain ® Attribute ® ...
    Information
    Description
    ( Rename)
    You can change the name of the process chain.
    Display Components
    Display components are the evaluation criterion in the process chain maintenance. Assigning the process chains to display components makes it easier to access the chain you want.
    To create a new display component, choose Assign Display Components in the input help window and assign a technical name and description for the display component in the Display Grouping dialog box that appears.
    Documents
    You can create and display documents for a process chain.
    For more information, see Documents.
    Last Changed By
    Displays the technical attributes of the process chain:
    ·        When it was last changed and who by
    ·        When it was last activated and who by
    ·        Object directory entry
    Evaluation of Process Status
    If you set this indicator, all the incorrect processes in this chain and in the overall status of the run are evaluated as successful; if you have scheduled a successor process upon error or always.
    The indicator is relevant when using metachains: Errors in the processes of the subchains can be evaluated as “unimportant” for the metachain run. The subchain is evaluated as successful, despite errors in such processes of the subchain. If, in the metachain, the successor of the subchain is scheduled upon success, the metachain run continues despite errors in “unimportant” processes of the subchain.
    Mailing and alerting are not affected by this indicator and are still triggered for incorrect processes if they have an upon error successor.
    Polling Indicator
    With this indicator you can control the response of the main process for distributed processes. Distributed processes, such as the load process, are characterized as having different work processes involved in specific tasks.
    With the polling indicator you determine whether the main process needs to be kept until the actual process has ended.
    By selecting the indicator:
    -         A high level of process security is guaranteed, and
    -         External scheduling tools can be provided with the status of the distributed processes.
    However, the system uses more resources; and a background process is required.
    Monitoring
    With the indicator in the dialog box Remove Chain from Automatic Monitoring?, you can specify that a process chain be removed from the automatic monitoring using CCMS.
    By default CCMS switches on the automatic process chain monitoring.
    For more information about the CCMS context Process Chains, see the section BW Monitor in CCMS.
    Alerting
    You can send alerts using alert management when errors occur in a process chain.
    For more information, see Send Alerts for Process Chains.
    Background Server
    You can specify here on which server or server group all of the jobs of a chain are scheduled. If you do not make an entry, the background management distributes the jobs between the available servers.
    Processing Client
    If you use process chains in a client-dependent application, you can determine here in which client the chain is to be used. You can only display, edit, schedule or execute the chain in this client.
    If you do not maintain this attribute, you can display, edit, schedule or execute the process chain in all clients.
    Process variants of type General Services that are contained in a process chain with this attribute set will only be displayed in the specified client.
    This attribute is transported. You can change it by specifying an import client during import. You must create a destination to the client set here in the target system for the import post processing (transaction RSTPRFC)  The chain is activated after import and scheduled, if necessary, in this client.
    Execution User
    In the standard setting a BI background user executes the process chain (BWREMOTE).
    You can change the default setting so that you can see the user that executes the process chain and therefore the processes, in the Job Overview. You can select the current dialog user who schedules the process chain job, or specify a different user.
    The setting is transported.
    The BI background user has all the necessary authorizations to execute all BI process types. Other users must assign themselves these authorizations so that authorization errors do not occur during processing.
    Job Priority
    You use this attribute to set the job priority for all of the jobs in a process chain.
    Hareesh

Maybe you are looking for

  • WEBUTIL client_to_db file transfer

    I cannot delete a file from the local client drive after using the webutil_file_transfer.clinet_to_db function, whilst the form is still running -- CODE USED in Forms 9ir2 DECLARE      result BOOLEAN;      wordexe VARCHAR2(1000); BEGIN delete_check;

  • Smartform upload problem (within same Version)

    i have download smartforms from 4.7 first and than uploading it in same 4.7 but error occurs as below: first:  "A serious error has occurred The transaction had to be terminated". than second: Internal error (illegal structure of data storage) Messag

  • Mutifilter input for a component

    Hi All, I am pretty new to Xcelsius. I have a requirement for multiple filter input which I am not able to execute. My data is coming from a BEx Query & we only have QAAWS to get the data into xcelsius Requirement: Showing data in a Column chart. I h

  • Cisco Content Engine for Content Filtering

    Hi All, I am looking for a low end solution for Content Filtering and would like to use Cisco Content Engine. 1. The documentation said that Websense, Secure Computing SmartFilter (does not require separate SmartFilter) & N2H2 support is there on the

  • SOA composite - new revision x running instances on old revision

    Hello, We use OIM 11g R1. I have a doubt about how to update a SOAcomposite (that has Human Task) with running instances on the old version. I am trying to add notifications in the bpel process when the human task is approved or reject. And will see