Process Chain COPY

I copied an existing process chain with a new name. The problem is that I'm not being able to change the variants for the start process. How do i do that ?

Hi Farhan,
Right click on your Start Process and say Exchange Variant.
Here you can create new.
Hope this helps.
Regards,
Ashish Goel
(Reward with points if this helps you)

Similar Messages

  • How to copy process chains

    Hi Guru's,
    Can I know the procedure how to copy process chains.
    Thanks in advance
    Sunitha
    [email protected]

    Hi,
    Look at the threads below :
    Copy Process Chain
    Copy of Process Chain
    Cheers,
    Kedar

  • Edit process chain in 3.5

    Hi Experts,
    I created one process chain ( copy with another chain) now i need to add one info package, so where can i find out edit mode and how to add that info package?
    Thanks

    Hi David,
    Run RSPC transaction.
    Double click on your process chain.
    From the tool bar(available on left side) --> select Process types icon
    then drag the infopackage from left hand side to right hand side.
    Select your process variant (infopackage). and click ok. and link the chain.....
    Cheers,
    Edited by: Dubbu on May 17, 2010 10:54 AM

  • Error while copying a process chain.

    Hi All,
    I get an error message while copying the process chain in Production environment.It says "SAP System has status 'not modifiable'".Choose display object or Cancel.I hope this is because of the config. that there is no option to create anything .
    Please confirm.
    Regards,
    Shailja.

    Hi Shailja,
    That means that you can not change that type of object on Quality or Productive server.
    Go to Administrator Workbench, sub menu Transport Connection, there you will find a button called Object Changeability (with a truck). Click on that and change the types of the concerned objects to 'Every changeable' in your case.
    Beware that you must change the status not with a double click but with a right click
    also refer the following thread you can find your solution
    Error message after process chain transport
    Hope this helps
    Regards
    Karthik
    <3rd Reminder for points removed>
    Message was edited by:
    Moderator

  • Copying a process chain

    Hi guys,
    I am trying to copy a process chain but use different infopackages and ODS objects from the original one. Please how do i go about this? Thanks

    In Rspc , select the PC you want to copy from , on the menu bar , select Process chain , and their select Copy. And more over , which BI version are you working on?? You have this option in 7.0 only I think, if you are on BI 3.5 , I dont think you can copy, the only option is you have to create a brand new one.
    let me know.

  • How to copy a existing process chain

    hi
    i am a SAP BW learner.
    i created a process chain for inital load and i want to create a process chain by copying first created process chain and tell me in what situation we delete the indexes of InfoCube.
    Can any one provide me the solution to how can i copy the existing process chain and tell me in what situation we delete the indexes of InfoCube.
    Thanks in Advance.

    Hi Kiran:
    Thats correct, you can copy an existing process chain and you will get all the variants in it.
    well, the best practice to manually do the INIT loads and let the delta loads be in process chain.
    we delete indexes and re create them when we are loading an infocube and the reason  is performance
    Assign points if helpful
    kalyan

  • Copy of process chain

    Hi,
    Can we create a copy of a process chain? Like we can do for other objects (ODS/Cubes/Queries etc.).
    If yes then how. And if no then why.
    thanks ..

    In BI7.0,Copy option will be available in Menu -- Under Proces Chain Tab
    After this create a new variant for the Copy Process Chain....Using Exchange Variant assign this to the Copy chain and activate it.
    Similar in 3.5 also,but for Chain copy is done using Tcode --copy
    And the remaining things are same....
    Mohan

  • Copying Process chain in BW 3.5?

    Hi All,
    How do we copy a process chain in BW 3.5?
    Thanks in Advance.

    Hi,
    Open the chain which u want to copy and then in the Transaction code input box write copy and enter. this will give a pop up for Process chain and Process chain Variant give these name which u will provide will be the name of ur new Process chain.
    Thanks,
    Nagesh.

  • Urgent Issue - Copy DTP and Process Chains in New Client Instance

    We have created new client Instance ( CLNT 510 ) based on our present client ( CLNT 500 ).
    We have all the process changes, application components from source system CLNT 500 and data ( both for master and transaction data ) in place for the CLNT 500.
    Now we need to use the CLNT 510 for our futher development. RFC connection has been established.
    Just want to know, do we need to create all the Application component trasfer , Transformation, DTP , Infopackages , Process chains again for the CLNT 510 data.
    please help.
    Thanks and Kind Regards,
    Pratap Gade.

    Hello Jr Roberto,
    Hello Jr Roberto,
    We have company implementing mutiple SAP Implementations in different countries.
    Client for BW Dev is 400.
    Source system for Client BWD :
    ECC Client ERP Dev - 500 ( for Holland Implementation )
    ECC Client EPR Dev - 510 ( for German Implementation  - Instance of ECC 500)
    We are completed with the Client 500 implementation.
    We are starting the german implementation and they have created a intance of Holland ECC Dev client 500 for german implementation with german data.
    Now they have setup 2 rfc connection in BWD 400.
    Also finally when they move to QAS client they are going to integrate the data of the both countries into one client.
    Presenlty I need to use ECC client 510 client for our german development.
    We have around 40 SAP BI reports in our first implementation. and around 10 in our second implementation.
    Just want to know, what are issues to be considered in loading master data ( will it overwrite the master data from the client 500, if i extract the master data from client 510 )...and all the other issues like can I copy all the process chains...etc  from client ECC 500 to ECC 510, without creating all transformation, DTP , Infopackages to load all the master from client 510 again.
    I need a broad understand on how to go about the development ...starting with Application Components transfer from source system Client 510 ....to report development. ( if possible using the already created objects....infopackages , DTP etc..)
    your help would be really appricated Mr Roberto.
    Thanks and Kind Regards,
    Shekar.

  • Copy process Chain with Meta chain

    Hi experts,
    how to copy the process chain with Meta chain, since the process chain which I planing to copy it hold meta chain and also local chain, I coping for change the technical name for the PC, is it possible to copy meta chain and local chain along with PC?
    and plz breif me about meta chain and local chain why we have to use them and where we have to use them?
    plz explain with scenario.
    Thanks,

    Hi,
    Once after the copy of the chains you need to change the start variant with the new one as the same start process can not be used in two process chains at the same time.
    So Once after changing the start process for your MC and LC then you are good to go ahead to trigger the same.
    If you trigger the MC then it will take care of trigerring the LC automatically.
    In terms of changes in the process chain, you can get the last changed details in the log view but you can track the timestamp of changes from the process chain tables like (RSPC* and then press F4). But you can not track which process has been changed in this.
    Thanks
    Murali

  • At what scenario we go for copy process chain??

    At what scenario we go for copy process chain??

    Hi,
    Letu2019s say you are doing regular monitoring of a process chain. One fine day this process chain gets failed due to some reason on one of steps. And say there are 10 more steps still to be executed.
    You fixed the error by performing some manual activity which was actually next steps of process chain where it failed.
    Now you can not do repeat/repair in process chain because you have already performed them but you want remaining steps to be executed automatically not manually.
    What you can do is copy chain with only required steps in it remove remaining steps.
    Regards,
    Akshay

  • How to copy Process chain

    Hi bw gurus
    How to create a process chain by using the existing process chain.
    kiran

    Hi,
    Goto-->> RSPC, dble click on the existing process chain whichyou can see it in the left hand pane. In the box where you type in the transaction code, type 'COPY' and press Enter.

  • Copy process chains in BW

    Hello all,
    Do you know the way to copy process chains in BW?
    Regards,
    Ana Botana

    Jeroen,
    Can you please clarify?  Do you do this copy in RSPC? Where do you type "copy as transaction".
    Rgds,
    Guillermo

  • Error in Step Copy Plan version in Process Chain

    Hi all,
    We have  step in Process Chain called 'Copy Plan version'.This stet is getting failed quite frequently. I just repeat it and the error is getting solved. I just wanted to know that is there any permanent solution for that. We cant afford to getting it failed that frequently.
    I dont have any idea about this step. Can you please provide me information about this step and a possible remedy aw well.
    The error messaage is :
    Selection accesses data that is currently locked; user     
    Job cancelled after system exception ERROR_MESSAGE.
    Please suggest.
    Regards
    sunny

    This is due to "Selection accesses data that is currently locked; user" , there is another process from another process chain which locked the object at the same time frame , so due to that this step is failing
    you can increase waittime 30mins(example)before this Step Copy Plan version executes in the process chain.
    OR, change the schedule time for this process chain

  • Copy of BCT Process Chain

    Hello Guru Friends
    Do you know how i can copy or edit the PC Business content to Z infoproviders or is necsary develop all the process chain ??????
    Whit best regards
    agt

    hi agt,
    in RSPC, choose the process chain you want to copy by double clicking it, then you will see it in the left frame. type 'copy' in the box where you type in the transaction code and press 'enter'.
    normaly we will develop the process chain.

Maybe you are looking for