Process Chain Data load fail /send email  is not woking

Hello Experts,
I have created a process chain for daily data load. And created a message variant to send an email if the data load fials, but it's not working. I am not sure what I am missing. Here are the step I did...
1. Right click on the Info Package in the process chain and select Create Message, select errors radio button and then created new variant.
2. In the variant screen, clicked on Maintain Recipient list and enter the Recipient names and mail options like express mail, send copy etc there and then saved.
Didn't select any under REcip type. Not sure whether it's needed.
I greatly appreciate your help.
Thanks
Ram
Message was edited by: Sri Vani
Solved by myself.
Thanks a lot.
Message was edited by: Sri Vani

did you configure the Basis process to send external emails and the automatic output process?
You could see this in tx SCOT
If there´s any record in tree (SAP SERVER)->INT->SMTP
Here.... if is not configured the automatic output you can manually send the emails.....
If this doesn´t works you need to talk to your basis support for the email basis configuration....
Regards

Similar Messages

  • Process chains data load

    Can any body help in data scheduling issue
    I am able to load data manually the issue is i selected some of the datafields  in InfoPackage  data selection field and saved .
    i put this Ip in the process chain.now the issue is i don't to load data immediately .. say i want to load the data after 3 hours for this i want to set the time .i did set up in the process chain start variant
    but it is not working can anybody give me the steps in detail please....
    Advance thanks
    Kelvin sam

    Hi Kelvin,
    This should work using the start variant in the chain but of course the infopackage variant will only run if the process
    before was successful (depending on your settings with the links joining the processes in the chain).
    If you right click on the start variant, select 'maintain variant' , on the next screen make sure 'direct
    scheduling' radio button is flagged unless you are using a meta chain as starter process.
    Click on 'change selections' button , on the next screen select 'date/Time' option and here
    you can set the start date and time. You then need to save this setting , select save
    and on the next screen save again. You then need to activate and schedule the
    chain again.
    If this still does not work can you check if there are errors messages generated in
    sm21/st22 or in the process chain log.
    Regards,
    Des.

  • Problem in Process chain data loading

    Hi Experts,
    We have a Process chain in which the lists of jobs are as follows.
    1) BI_TRIGGER_PROCESS
    2) BI_PROCESS_LOADING
    3) BI_PROCESS_ODSACTIVAT
    4) BI_PROCESS_DROPINDEX
    5) BI_PROCESS_LOADING
    6) BI_PROCESS_INDEX
    7) BI_PROCESS_ABAP
         These jobs trigger the PC and load the data to ODS, activate and delete the index for cube and load data to cube and create the index and then delete the file from the FTP.
    The problem is that the Initial job (BI_TRIGGER_PROCESS) is being repeating multiple times because of which the loading is taking place for the same file repeatedly to ODS. one day it was happend repeatedly for 130 times. This is being happening on a randomly basis. We are unable to figure it out the where the problem is. Can anybody help in this regard?
    Thanks.

    Hi Rama,
    Following is my understanding of problem.
    You have Following steps in process chain
    1) BI_TRIGGER_PROCESS
    2) BI_PROCESS_LOADING
    3) BI_PROCESS_ODSACTIVAT
    4) BI_PROCESS_DROPINDEX
    5) BI_PROCESS_LOADING
    6) BI_PROCESS_INDEX
    7) BI_PROCESS_ABAP
    Some times only first two steps repeat multiple times i.e
    1) BI_TRIGGER_PROCESS
    2) BI_PROCESS_LOADING
    In such case you should see the log from process chain log view.
    I believe you should take your process chain out of schedule and reschedule it.
    Also check whether somebody has scheduled the inopackage.
    Regards,
    Ajinkya

  • Infocube/DSO/Process Chain - data load statistics

    Hi,
    I'm trying to look for the total data records extracted  per day and extraction time from ECC into a particular DSO or infocube.
    Also the start and end times of the process chain which executes this infocube.
    We are trying to do some performance analysis for the volume testing.So ,we can compare the data volume loaded vs the execution times.
    I was able to look under the infocube/dso -> right click -> MANAGE -> transfered records/update records , request time,update time
    For this, do I need to look at the full update details or the delta update details?
    Also under a particular process chain,-> right click on First step ->Display messages to get the start time of the job
    Right Click on last Step ->Display mseeages to get the job finished time.
    I just wanted to get your thoughts on this, if this is the correct way to get the total records extracted and extraction times along with process chain times.
    Thank you.

    Hi,
    Based on the time char like 0calmonth, 0calday you will check the data.
    check the jobs in SM37 at ECC and BI system.
    select the specific jobs it will give clear picture. how much taking time form source to target.
    you use the DB02 and STO5 and RSTT you can do performance analysis.
    manage screen you will get either full or delta and which one source system and which type of data source.
    Process chains have it will automate the PRD system
    Thanks,
    Phani.

  • Regading Process chains data load monitoring

    Hi All,
    In my current project, I need to monitor process chains. I am kind of new to this environment as I had not done this before. My tasks are as follows.
    1. Process chains are scheduled for a periodic job for every on hour starting at 6 a.m and ending at 12 a.m. After that I need to stop the chain and reschedule it for next day at 6 a.m. How do I do that?
    2. Also if a delta process chain fails in one of the processes, I need to stop the chain before the next delta run starts filling the cube. How do I do that?
    Also how to see why the process failed?
    Please do respond.
    Thanks in advance.

    You can stop your process chain in SM37 tcode. Just select the schedules processes, and here you can see your process chain, just select it, and cancel it for next release.
    You can restart it, just by clicking on Execute button. Before executing PC, just cross check by right clicking process chain, and go to change selection option of maiantain variant of start variant. And see if process chain schedule option is starting at 6A.M. or not, and also check it is selected as period job of ` hour or not.
    You can see log of process chain by right clicking it, and checking the message. It depends on what option for next process is you selected, like if your next variant connected to failed variant is selected as only if success, then you don;t need to stop ot. It will automatically not go to next process. or right click and you can select stop.
    By right clicking on failed process you can see the logs in details.

  • Process chains for loading data to target is not functioning

    Hi SAPians,
    Recently, we have upgraded the firmware on IBM P590 with the help of IBM on Saturday i.e. 06/12/2008 (The firmware of P5-590 was SF235_209. It was upgraded to SF240_XXX) and since then the process chains for loading data to targets are not functioning properly.  We have stopped all the SAP services, database services & OS services from our end and services have been rebooted after firmware upgrade.
    However, the problem with the process chains that load transaction data and hierarchies is solved but the chains that load master data are still not working as scheduled.
    We tried to load the master data manually, by running DTP to load data to an object analysis code (attributes) the request remained YELLOW. After refreshing it several times, the request turned into RED. The error message was - PROCESSING TERMINATED (screenshot 1 attached).
    To mitigate this we tried deleting the bad request and it prompted with the below message:
    "Cannot lock request DTPR_4C37TCZGDUDX1PXL38LVD9CLJ of table ZANLYSIS for deletion (Message no. RSMPC178)" (screenshot 2 attached)
    Please advise us how the bad request should be deleted?
    Regards,
    Soujanya

    Hi Sowjanya,
    Follow the below procedure to make yellow request to RED:
    Use SE37, to execute the function module RSBM_GUI_CHANGE_USTATE
    From the next screen, for I_REQUID enter that request ID and execute.
    From the next screen, select 'Status Erroneous' radiobutton and continue.
    This Function Module, change the status of request from Green / Yellow to RED.
    Once it is RED, you can manually delete that request...
    Releasing LocK
    Gott Transaction Code SM12 and release the lock.
    Hope It helps you.
    Regardss,
    Nagaraju.V

  • Alert Message When Data Load Fails

    Hi Friends,
    I have three process chains(p1,p2,p3)and all for transactional data loading(psa-ods-cube).suppose whenever data load fails,it sends message to my company mail id. is there any functionality to do like this.
    i am not much aware of RSPCM(Process Chain Monitor).if anyone knows. tell me how much does it support my requirement?
    thank in advance
    sam

    hi Sam,
    welcome to sdn ...
    you can add 'create message' by right click the process type, this will lead you to mail sending setting.
    see thread
    Getting Failed process chain info through email
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b0afcd90-0201-0010-b297-9184845346ca
    you may need to setup sapconnect for email, take a look
    http://help.sap.com/saphelp_webas620/helpdata/en/2b/d925bf4b8a11d1894c0000e8323c4f/frameset.htm
    http://help.sap.com/saphelp_webas620/helpdata/en/af/73563c1e734f0fe10000000a114084/content.htm
    hope this helps.

  • Error-Master Data Load Fail

    Hi Friends,
    While loading master data from Process Chain, the load has been failed by having specail Characteristic in it. W e have edited that characteristic record  in SAP R/3 system.
    What we have to do now....... Should i have to Repeat the load Process in process Chain For that Object or should i do Manual Upadate from RSMO. There is another 2 process has to run below that master data object.
    *************points Are Assured********
    Regards
    Revathi

    Hi Revathi.....
    Is ur load is through PSA?......look U hav edited in the source system.........not in BI side.......if the load is through PSA also.........records r still erroneous in PSA.......
    Since u hav already edited in the source system............again editing in PSA is repeating the same job twice.........it is of no use.........
    Since it is master data.................no need to delete the request from the target............actually data target means Infocube or ODS.........Master data is not a Data target.........u will not find the data target icon in the infopackage monitor or the data target tab in the infopackage Scheduler.........
    Just make the QM status red and repeat the load in the PC............if it is a full load making the QM status red is not mandatory...............but for Delta..........it is mandatory...........since only then Init pointer will set back...........and the System ask u for Repeat delta.......
    But another point...........Master data generally does'nt support Repeat delta...........if u try to do Repeat delta.........load will again fail with Update mode R.........then u hav to do re-init...........ie......
    1)delete init flag
    2)Do init with data transfer
    3)then delta.....
    Regards,
    Debjani......

  • Data load failed while loading data from one DSO to another DSO..

    Hi,
    On SID generation data load failed while loading data  from Source DSO to Target DSO.
    Following are the error which is occuuring--
    Value "External Ref # 2421-0625511EXP  " (HEX 450078007400650072006E0061006C0020005200650066
    Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0BBP
    So, i'm  not getting  WHY in one DSO i.e Source  it got successful but in another DSO i.e. Target its got failed??
    While analyzing all i check that SIDs Generation upon Activation is ckecked in source DSO but not in Target DSO..so it is reason its got failed??
    Please explain..
    Thanks,
    Sneha

    Hi,
    I hope your data flow has been designed in such a way where the 1st DSO as a staging Device and all transformation rules and routine are maintained in between 1st to 2nd dso and sid generation upon activation maintained in 2nd DSO.  By doing so you will be getting your data 1st DSO same as your source system data since you are not doing any transformation rules and routine etc.. which helps to avoid data load failure.  
    Please analyze the following
    Have you loaded masterdata before transaction data ... if no please do it first
    go to the property of first dso and check whether there maintained sid generation up on activation (it may not be maintained I guess)
    Goto the property of 2nd Dso and check whether there maintained sid generation up on activation (It may be maintained I hope)
    this may be the reason.
    Also check whether there is any special char involvement in your transaction data (even lower case letter)
    Regards
    BVR

  • Data load failing with a short-dump

    Hello All,
    There is a data load failing with the following short-dump:
    Runtime Errors         UNCAUGHT_EXCEPTION
    Except.                    CX_FOEV_ERROR_IN_FUNCTION
    Full text:
    "UNCAUGHT_EXCEPTION" CX_FOEV_ERROR_IN_FUNCTIONC
    "CL_RSAR_FUNCTION==============CP" or "CL_RSAR_FUNCTION==============CM004"
    "DATE_WEEK"
    It seems as if it is failing in a function module - please advise.
    Regards,
    Keith Kibuuka

    Did you read OSS [Note 872193 - Error in the formula compiler|https://service.sap.com/sap/support/notes/872193] or OSS [Note 855424 - Runtime error UNCAUGHT_EXCEPTION during upload|https://service.sap.com/sap/support/notes/855424]
    Regards

  • How to run change run in process chain when it fails

    HI All,
    How to run  attribute change run in process chain when it fails. Give me the procedure with clear description. Is there is any difference with 3.x versions in running this.
    Thanks,
    Pratap Reddy

    Hi Pratap.
    If BI Accelerator is not being implemented by ur company, in that case if change run fails u'll proceed by 'Repeat' process option as usual we do in 3.x.
    If BIA is exists, in this scenario u can not repeat as we do in 3.x. U have to drop the indexes on cubes effecting that change run and run the change runs. Once it is finished recreate BIA Indexes on cubes.
    Warm Regards,
    Ramki

  • Attribute data load fails for 0RPA_MARM Infoobject

    Hi BW experts,
    Attribute data load to the infoobject 0RPA_MARM(not a infoprovider) is on yellow status for long time and after it is throwing the below error
    Runtime Errors :UNCAUGHT_EXCEPTION
    Except                 : CX_RSR_X_MESSAGE
    I checked the forums for this issue but got the solution for target as infoprovider.
    Please suggest.
    Regards,
    Leo.

    Hi Leo,
    Basically loading data into Master data Infoobject and making it InfoProvider are two different things. Loading data in Master data infoobject will be same for all the Infoobjects and when you make them as Infoprovider you will get an advantage of doing reporting directly on top of that Infoobject.
    Regards,
    Durgesh.

  • I can send emails but not receive them. The sender address was rejected by the server

    i can send emails but not receive them. The sender address was rejected by the server.

    Your mail server doesn't like the sender's address for some reason, perhaps because his mail server has been blacklisted for spamming.

  • New Iphone 5 - can send emails but not sync any other information

    I have just tried adding an exchange email account to a new iphone5 and I go through the steps to verify which all works then once set up is complete I can only send emails but not receive them also not able to see outlook file tree or any contacts or calendar appointments.
    I have 2 other iphones working - 1 iphone 4 and 1 iphone 5.
    Any suggestions?

    Contact the exchange admin.

  • My iphone 5s can send email but not when a pic is attached.  Help?

    My iphone 5s 7.03 can send email but not with a photo attached.  Help?

    Fixed!! My cellular/internet provider had to do a restore and now it works

Maybe you are looking for