Process Chain display

Hi All,
I am looking after process chains everyday , today I can see process failed at RSPCM ,I when to particular process chain at RSPC double on process chain not unable to display any process chain in production system. when I double click on process chain system not displaying any process chain. I am sure no authorizations changed for me. even i have tried to display by clicking change/display ( pencil ) ,nothing happened .
Is there anything I have to do ?
Regards
Hari

Hi Srinu,
Thanks for your reply .
Not only the failed process chain , any process chain is not displaying in production system , it is not new process chain , we load everyday morning , it is happening from couple of years.
I am trying to access from home , everyday I check morning loads from home before go to office .I am sure that is not influence .
I have not tried to activate process chain, let you know once I have activated .
Regards
hari .

Similar Messages

Process Chain Red 'X', Exec Infopckg Yellow, Infopckg monitor/data correct

Dear and respectable colleagues of the forum,
I am experiencing a problem in a process chain when executing infopackages. The process chain has 6 "Execute infopackage" processes. Sometimes (1 of 4 attempts average) my process chain ended with red color with 'X' status in the Process Chain Display Log View.
Reviewing within the chain Log, there is one of the "Execute infopackage" processes that appears in yellow color (it loads from direct update ODS to an infocube). However, revising the Logs for its corresponding Infopackage execution I found that it says that "Data successfully updated". Moreover, If I review the data loaded it seems to have been loaded correctly.
Then, Why does the "Execute infopackage" process in PC finishes with yellow color if the Infopackage execution itself finishes correclty?
To complete the whole scenario: I execute this process chain every night from an Abap program; the program has a Loop that traverses a table, and executes the process chain as many times as the quantity of rows in that table (table has 10 rows meaning offices). As you can understand, the chain is executed 10 times, and the error occurs in any of the 6 "Execute infopackage" processes indistinctly.
I review ST22 and SM37 for all users for the datetime when the error occured butnothing bizarre was reported. It is left to review SM21.
The following is the detail of messages.
Logs for Execute Infopackage
   Data successfully updated
Monitor of Infopackage
Details Tab
     Requests (messages): Everything OK
     Extraction (messages): Everything OK
     Transfer (IDocs and TRFC): Everything OK
     Processing (data packet): Everything OK
       Data Package 1 ( 45 Records ) : Everything OK
         Transfer Rules ( 45 -> 45 Records ) : No errors
         Update rules ( 45 -> 45 Records ) : No errors
         Update ( 45 new / 0 changed ) : No errors
         Processing end : No errors
     Process Chains : Errors occurred
       Llena cubos de carteras vtas sec por distrib - autom

Dear s v desh,
I am on SAP BW 3.5, I already checked the cube and it is green - all right.
The message in the infopackage excution node in the process chain says (non-error):
"Data successfully updated"
The error message in process chain monitor (log) says:
......"Overall status: Error occurred: or: Missing messages
............Process Chains : Errors occurred"
I just realized that there is no messages at all in the infopackage monitor (log).
I have received a clue, someone asked me to review note 1396417, and I will.
Regards
Juan Alonso Teevin

Process chain issue in production server

hAI
I created the process chain to load the transaction data . Then i transported to Quality and Production server.
1) When i try to open the my process chain in RSPC in Production System. Then im not getting the process chain . But im getting black just.
But when i press 'change' button in Production Server then it says that "changes are carried out in original system" and then im getting my process chain .
2) When i try to schedule my process chain in production server then it asking for new transport request . Why it is like that . Once i transport the process chain from development server to production server. Then it shouldn't ask for new request.
Pls help in these secarios. I need urgent help .
kumar

Hi Kumar,
I don't know what the problem is but you can copy in PRODUCTION environment the process chain to a new one.
Please follow the steps:
1. Open the problematic process chain (display or change mode).
2. In the command line write the word "copy" .
3. A popup will appear, insert a new name for the new process chain and confirm.
4. The new process chain is now opened but it is not active yet.
5. Delete the "old" START event and insert a new one.
6. Activate and schedule the chain.
While activating the new chain, no transport request should appear in PRODUCTION.
Hope it helps, Amir.

Process Chain running even after end date

Hi,
We are scheduling month end PC to run every 2 hours and also we have given end date for today evening.but process chain runs even after end date for every 2 hours.so we have to manually remove it from scheduling.
Any method how can PC stop on its own after end date .
Any help highly APPRECIATED
Thanks
Nilesh Pathak

There might be multiple release jobs for thie process chain.
So check the same. Right click on process chain --> Display scheduled jobs --> Here all the jobs logs of the chain will be available.. So check the same here...
As you have descheduled it now.. probably you may not be having it as the first release job might be moved to Schedule status as soon as the END date has reached and then second one might have gone when you have removed the chain from Schduling..
Anyway check the same.. and also check in SM37 whether any other user has triggered it manually today or not?

Process chain in iview

Hi experts
I have added transaction RSPC (process chain display) in an iview.
When i view a P.Chain i can only view it in tree display and not network display.
Is there any way to view it in network display!
Thanks

Has anybody faced the same issue?
Plz help

Creation of process chain folder

Hi,
Please let me know how to create process chain folder.
Example: i want create folder called SALES in RSPC, so i can put all sales related process chains in Sales folder.
Thanks in Advance
Satya

Hi Satya,
Goto RSPC -> Open the process chain -> Display Components -> select the one you want -> now activate your process chain. It would get assigned to the conmponent.
Check this too:
Goto RSPC -> Click on the Display Components button (Shift+F11) -> It should display a pop up -> Click F4 and click on create button to create the Appl Component.
Remember this Application Component is diffefrent from the Admin Workbench Appl Component. This Appl Component is just meant for grouping.
To assign your process chain to your Appl Component just "drag and drop" the chain from the Not assigned to your appl compt.
Bye
Dinesh

Process chain errror handling

Hi Experts,
One of my process chain failed and it includes locan process chain which is failed and message is :
"Start Infopackage (infopackage number)"
what should I do in this case? simply repair?

Hi Pia,
Right click on local PC(process chain) ,,,,,,,,,,Display messages,,,,,,,,,, go to the failed process,,,,,,, right clik on he fail process,,,,,,,,, click on display messages,,,,,,, you will directly go to manage screen,,,,,,,, Set the QM status to red in status tab,,,,,,,,delete the request ,,,,,,,,,, reload the data data i.e schedule start,,,,,You will get message request again click yes,,,,,, your problem get resolved,,,,,,,,if you want to set the process chain status to green,,,,, you need to use FM ,,,,,,,if you need any further clarification,,,,,, lot of post are there in SDN.
Regards,

How to display a popup message in query (through process chain)

Hi Gurus,
I need your help.
I have an input query that triggers an event (through a button) and runs a process chain.
I would like to show a popup message to inform the user when the process chain is over.
Using function modules I've been able to show popup messages in the workbench, but I want to display this message directly in Bex Analyzer 7.0.
Thanks
Gabbo

Hi,
I'm also looking for a solution to display a custom message in the Bex Analyser at logon.
Using function module in the logon user-exit works but only when loggin to the workbench.
I don't want to use SM02 (which works in both cases) because I need to display a variable message depending on the user.
If someone has an idea, I'll really appreciate.
Best regards and happy New Year to all of you.

Change on process chain not visible in display mode after transport

All,
We have changed a process chain where message notification was active in development.
We have deleted the notification and created a transport. This has been released and implemented into the QA system without a problem.
When displaying the new process chain in QA the change was not visible. But in change mode it is.
Can anyone tell us what might be a cause/solution for this? Also for future changes.
Gui error??
Thanks in advance.

hi,
Try activating the PC again in the QA.
if still it does reflect the message notification, then try creating the request again
in DEV and transport.
make sure you r out of the Process chains in DEV nad QA when transport happens.
This is just a practice.
Regards,
Dhanya.

External Email address in process chain alerting not fully displayed

Friends,
I have this weird problem and not sure if its a real issue.
I am maintaining messages for process chain failure alerting. I am using an external address and receipant type as "via Internet".
When I enter email id (ex: abc.123.xyz at mycompany.xxx) save it and come back, and If I re enter that screen the entered email is not fully displayed, few chars are truncated, (ex : abc.123.xyz@mycompan).
Can you guys please help me figure out what the issue is?
Is there any restriction on the length?
Thanks
vijay

please dont bother...

Additional process chain groups to be displayed in DM

Hi. Just wondering if it was possible to display additional process chain groups in DM. The way I see it only "Business Planning & Consolidation: Examples" and "Business Planning & Consolidation: System" can be displayed and therefore used. I would like to organise my chains in a better structure if possible.
Am I missing something perhaps?
Thanks
Sean

Hi Sean
It worked for me in the past and I can see that additional folder in Data Manager, but when I tried creating another one now I can't see in DM. So, either something had changed or I forgot some step.
I'll keep looking, but it's definitely doable.
Gersh

Display components for process chains

Hi all,
i remember a sap note or a how to guide to configure the display components for process chains as hierarchy like:
- my chains
    - daily
    - weekly
    - monthly
         - monthly admin
         - monthly xyz
but right now i find no information about that.
Do you?
thanks for your help.

Hi,
Check below threads -
Change the Directory of a Process chain.
Process chain: Moving chain from one u0093folderu0094 to the other
AleX

Display Source System Name in Process Chain Email

We would like to show the source system name (QA, Prod, etc) in the email subject when process chain messages are emailed so we can easily discern between production messages and messages from our test system. There doesn't appear to be a straightforward way to do this.
I have seen a Re: Howto Insert System ID into Process Chain Email Message which discussed this topic and offered 2 potential solutions neither of which work for us:
1. Open the production system and modify the messsage directly in the production system
2. Edit the First & Last Name of the sending user in the production system (does not work for us because we use central user administration)
Can anyone suggest another method of accomplishing this requirement?

we achieved it by changing text of [email protected] from 'BIWREMOTE' to BIP BIWREMOTE'....so in our mails even though mail id is same, but it display it for us as BIP.
Just go for user BIWREMOTE, and change format field with whatever name you wanna recieve mail. It should work properly.

Some times the logs not display in process chains

Some times the logs not display in process chains then how could we find them??

If you are in Tcode RSPC and opened your process chain you are able to click on the Logs icon. It will prompt you for a date selection.
If this still doesn't work you might have forgotton to activate and schedule your process chain. Before you activate check that your start variant is set to Direct scheduling by double clicking on the start variant.
hope this helps.
Cheers,
Andrew van Schooneveld
(assign points if useful)

Display Process chain

Hi,
I'm looking for a transaction code to display Process chain without locking them.
Thanks.

Hi,
Why not create a custom transaction that has RSPCM, or RSPC or BWCCM as the backend transactions. In the authorization for the user change the activity type for the process chain to display only and put it in a new role. Also have the custom tcode attached to that role. You can see if that works.
Cheers,
Kedar

Process Chain display

Similar Messages

Maybe you are looking for