Process chain error - Attribute change run

Hi,
I am creating a Process chain to load 4-5 master data with its text.
I get a error while executing :
it says : Attribut change run need to be set up.
what should i do
1 :where should i set it up and how ??
2 :why is that needed ??
I included it in the Process chain and still it says that i need to set it up in the administrative workbench .
Please help me understand .
Thanks,
GG

Hi , when i execute a Process chain it stops at the A Master data load package and i get that red.
if i double click it ,
It says that
Attributes are not yet maintained.
If i see the details,it says
Diagnosis
     The attributes have either not yet been created or activated.
     The data cannot be taken from the source system without maintained
     attributes. Therefore, this data request is not possible.
Procedure
     Maintain the attributes for this master data-InfoSource in the
     Administrator Workbench and then activate them.

Similar Messages

Hi i have 50 infoobjects as part of my aggregates and in that 10 infoobjects have received changes in masterdata.so in my process chain the Attribute change run in running for a long time.can i kill the job and repeat the same.

Hi i have 50 infoobjects as part of my aggregates and in that 10 infoobjects have received changes in masterdata.so in my process chain the Attribute change run in running for a long time.can i kill the job and repeat the same.

Hi,
I believe this would be your Prod system, so don't just cancel it but look at the job log. If it is still processing then don't kill it and wait for the change run to complete but if you can see that nothing is happening and it is stuck for a long time then you can go ahead and cancel it.
But please be sure, as these kind of jobs can create problems if you cancel them in the middle of a job.
Regards,
Arminder Singh

Error in process chain with attribute change runs

We have one warning is coming in one process chain :A type "Attribute Change Run" process cannot precede process "Execute InfoPackage"
We checked the Process View , we found that there are number of attribute change run after each scheduling of Info package with different datasource but for same data target.
How to remove this warning .
Some onsite person has added this extra Attribute Change Run recently.

Hi Surendra,
If it is the same Info-object that is getting loaded through different Info-packages then have only 1 "Attribute Change Run" process at the end. You can ignore the warning.
Bye
Dinesh

Attribute change run Failing in Process Chain

Hi guys,
Every day my process chains is failing due to Attribute change run and I am maually running attribute change run.
And one more thing when the attr. change run is triggered automatically,then it is generating 2 change counters in RSATTR tcode instead of 1.
One is successfully completes and one is still in schedule.After 2days days it is showing like completed change count id.
Please help me.
Regards,
Tiragati.

Hi,
As you said Attribute change run step is failing every day.
can you post the error message. is it failing because of Lock issue or some other issue.
Mostly attribute change runs fails with lock issues. if its the same problem in your case. make sure that no master data objects runs at the time attribute change run runs.
Try to put some delay in the process of the Attribute change run so that it will not get failed.
Check if its the same ACR scheduled or diff objects?
Regards
KP

Attribute Change Run- Serial or Parallel

If we are building a chain for Attribute Change Run for all Master data objects, should we:
1. load Masterdata A, followed by attribute change run, load masterdata B followed by attribute change run, load masterdata C followed by attribute change run....
2. Load Masterdata in Parallel followed by AND with ONE attribute change run.
The first one seems grossly redundant but then if we have only ONE attribute change run, wouldnt that lock up all the objects for a LONG time?
Also, does an attribute change run by default include ALL objects which have been loaded anew and for which the change run has not run???

Thanks!
So, having just one attribute change run for all these objects is a better option?
Wouldn't it lock up the objects for a long time?
Also, say I have loaded object A , B and C. And in my process chain I have Attribute change run only for Object C.
Will the Attribute Change Run include newly loaded A and B by default?
I ask this because we saw something like this happening
Edited by: CC on Apr 9, 2010 8:33 PM

Attribute Change Run in Process Chain failed with SQL 942 error

Hi,
Attribute change run in th eprocess chain failed with the message " SQL Error 942" and ran succesfully after repeating the step.Searched in Forums for similar error but the solutions were not apt.
Any pointers would be of great help!!
Thanks in advance,
Bhagyarekha.

Hi Bhagyarekha,
The reason behind that error could be:
An attempt is made to activate a characteristic whose compounding was replaced and whose navigation attributes were simultaneously deleted. The replacement of the compounding temporarily deletes the M view of the characteristic during internal activation. The process of deleting navigation attributes involves converting the attribute SID tables. However, the M-view of the characteristic, which has just been deleted, is needed for this conversion.
Check this SAP Note:
Note 684405 - Replacing the compounding and deleting navigation attr.
Hope it helps.
Veerendra.

Regarding attribute change runs in process chains

Hi All,
While creating process chain for master data objects. I am trying to incorporate attribute change run process type for an info object. But the system asks for the DTP of the attribute and when i choose the DTP then both DTP and then Attribute are being incorporated. This is not exactly a problem but i need to understand why it is happening as i am already using that DTP to load data. Will this affect the data in master data object?. Thanks in advance.
regards
satish

Hi Bhagyarekha,
The reason behind that error could be:
An attempt is made to activate a characteristic whose compounding was replaced and whose navigation attributes were simultaneously deleted. The replacement of the compounding temporarily deletes the M view of the characteristic during internal activation. The process of deleting navigation attributes involves converting the attribute SID tables. However, the M-view of the characteristic, which has just been deleted, is needed for this conversion.
Check this SAP Note:
Note 684405 - Replacing the compounding and deleting navigation attr.
Hope it helps.
Veerendra.

Process Chain Attribute Change Run

Hi Experts,
I am working BI 7.0 version, I am try to run Process chain showing warning Error in Infopackage level, Please find the below Error Message:
A type "Attribute Change Run" process has to follow process "Execute InfoPackage" var.ZPAK_4DLO5GB778XTBBM57040KMRW4 in the chain
Please provide me solutions, how to solve this issue, Please ASAP.
Thanks & Regards,
Bharathi.

Hi All,
Thanks a lot for ur assistance.
Thanks & Regards,
Bharathi.

Due to attribute change run(sid's is missing)...process chain is failed

Hi All,
Due to attribute change run (SID's is missing) process chain is failed.kindly suggest me how we can rectify for this issue.
Thanks
Ragav

if master data is loading at same time while the attr/hier change run is occuring,it cause the change run to fail.
Usually u get error message like..user ALEREMOTE has locked the MD tables..
Wait for some time and then try attr change run manually by going to rsa1->tools->apply hier/attr change..
if it still shows locked..try to see in rsmo if a MD load has got stuck..
else..see in sm12 to find lock is on which tables..
last resort..delete lock forcefully from sm12..
first option is wait for some time and give a try again..
cheers,
Vishvesh

ABAP program to add in the process chain before the attribute change run

Hi
I need a ABAP program to add in the process chain before the attribute change run(process) to avoid the locks, can any one send me the program
Regards,
Satish

I am not sure of any standard program .... but you can write your own... should be a small one..
you can check if the table RSDMDENQ has entry for your InfoObject... if yes, then its locked.. if not.. its not locked

Process chain best practice - attribute change runs

When building attribute change runs into Process Chains I see that there are potentially two main options to consider:
1. One to One mapping. Incorporate a separate attribute change run object type after each InfoObject has been loaded.
2. Many to One mapping. Build the process chain so that one single attribute change run occurs after all the InfoObjects have been loaded.
I would be interested to see how other people have incorporated their attribute loading into Process Chains.
any info appreciated.
Mike

We run the attribute change run twice in our daily process chain, here's our order:
- Load all master data
- Attrib change run
- Load all tx data
- Run ABAP programs that generate master data
- Attrib change run
I doubt there will be much of a performance difference if you do the change run after each master data load, but it makes the process chain a lot easier to read.

Attribute change run process doesn't run in the chain

Hello everyone,
I have implemented a process chain with multiple parallel processes (12, like the batch processes in the application server) and I have put for each stream a loading of master data followed by the attribute change run process. When I run my chain then I find that one o two Attribute change run process doesn't run (the InfoObject chosen seem to be random!). The chain remain in yellow color. Can you help me anyone about this question?
Regards,
Francesco

Couple of thing you should keep in mind while loading master data.
if two loads are targeted to the same infoobject they will collide and as a result the later load will fail.
it is a good practice to use only one Attribute change run in the end before you load master data. but if there are dependecies you can use several in series
Also when you set up Attribute change run make sure that Attribute change run will pickup only the particualr infoobject not all the objects in the Attribute change run list.

Attribute Change Run in Process Chain

I'm making a process chain purely for attributes. Every time I add an infopackage for attributes I get prompted to make an attribute change run. Do I need an attribute change after every attribute infopackage or can I just have one at the end?

Hi,
You can have one attribute change run at the end of the process chain for all the attribute loads.
Cheers,
Malli.

Attribute Change Run Process chain

Hi,
We have a attribute change run step in Process chain with "selective infoobjects".
But when it executes it runs attribute change run for all infoobjects apart from what i have mentioned in the variant.
Proof:
I had a snapshot of infoobject list in RSA1->Tools->Attribute change Run before executing process chain in which i saw info objects other than what i had in the variant.
I ran the process chain.
Again I saw the infoobject list RSA1->Tools->Attribute change Run and it was empty!!
Even though I mention some infoobject in process "Attribute change Run" It runs for all info objects irrespective of what I maintain in the variant.
This causes problem and creacting lock. If anyone ever observed this problem and resolved please let me know!!
Thanks
VJ

well here is the POC ,I have nw204s SP-12 .
Steps followed -
Monitor of change run - 3 infoobjects currently waiting for CR.
Built PC with Process type "Attribute Change" only ..no other process types barring "Start" which is imperative.
Included only 2 Infoobjects from the 3 aforementioned.
Scheduled as immediate and it executed CR for the 2 only,so my CR monitor shows now 1 pending for CR to be run,which is as expected.
So as per Proof of Concept sp-12 works with process type "Attribute Change"
You may wish to check your process chain again and in worst case raise an OSS to SAP.
Hope it Helps
Chetan
@CP..

Attribute Change Run in Process Chain Texts?

Dear Colleagues!
A simlple question: Do you have an Attributes change run in the end of a Process Chain only containing text? (Master Data text) Or i s it sufficient to have it after attributes?
Regards
Silje

Hi,
Attribute chage run is meant only for Attr/Hierarchies.
No need to include it for texts.
For the texts changes were automatically reflected with out change run.
Regards
Jonn

Process chain error - Attribute change run

Similar Messages

Maybe you are looking for