PROCESS CHAIN error "Incorrect start date"

hi sap gurus,
I have parent chain in that a newly created meta chain is creating problem.I am getting error in the process chains since two days i am not able to solve this.Can anybody try to help me.
error: Incorrect start date: 00.00.0000; Start time 00:00:00 RSM     847
After that the process chain is turning red,but when i manually execute the process chain its running properly.
Please help me its urgent.

hi gurus,
Its working fine now.
Solution:
first exchange the variant with the smae and then activate and run.After that it will work in the process chain.
Thanks a lot to every body,especially MOHAN KRISHNA,

Similar Messages

  • Error in process chain when running package (data manager)

    Hello experts,
    I try to run the following how to : "move date between applications using Data Manager ..."
    Yon can find the pdf here : http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/b0480970-894f-2d10-f9a5-d4b1160be203
    I'm looking after someone who used it successfully, on my side after implementing all steps and running the package I get the message "IMMEDIATE RUN: Request to run the package on the server was successful The package is now running"
    When I look the log for the process chain, overall status of the process chain is yellow, and steps "modify dynamically" and "clear BPC Tables" are in error.
    I can't get any usefull error messages.
    If someone has an idea to have details about those errors, it will be appreciated.
    Points will be awarded, thanks in advance.
    Guillaume P.

    Hello Experts,
    I am also facing the same issue with PC failing at Modify_Dynamically step....
    This process type is working fine when used  in standard delivered process chain to load transaction data.
    I tried using this variant in my cutsom chain, but it fails.
    Please suggest.....
    Thx....D

  • InfoPackage in Process Chain Error

    Hi,
    I am working on a 3.1 Dev system which was copied from the Production system. The R/3 system was also copied.
    ......Prod.....Dev
    R/3.   LD1  --> LD3
    BW.    LD6  --> LD5
    The process chain is for Master Data Attributes.
    The problem i'm having is that the infopackage runs perfectly when scheduled manualy. But, when it is run in the process chain it says it cannot run because of the following error.
    "Source system LD1050 is incorrect; not possible to load data"
    I had a similar problem with ODS activation which i resolved by running RSRV but cannot seem to figure out how the infopackage can be corrected.
    Any help will be appreciated.
    thanks
    Sid
    Message was edited by: Siddhartha Anand

    Hi Anuj:
    Looks interesting but I did not do this configuration and was wondering if you could elaborate on what this does.
    Conversion of source system names after the trans
      OrSrceSystTargSrceSy+                         
      DD6_010   DD6_010   DD6 Client 010            
      LD1045    LD3196    LD3 Client 196            
      LD1046    LD3196    LD3 Client 196            
      LD1050    LD3196    LD3 Client 196            
      LD5010    LD5010    System LD5 Client 010     
      LD6010    LD5010    System LD5 Client 010     
      PD1120DEV PD1120DEV PD1 Client 120            
    Thanks
    Sid

  • What are the varoius type of process chain errors how we can solve them.

    Hi,
    I  need to work with process chains maintainace , Can any body tell me what are the different type of process chain errors generelly we used to get ,how we can solve them . IF possible  please provide me any document also  so that i can solve my
    abnormal problems for process chain errors.
    Thanks in advance .

    Hi,
    1) Invalid characters while loading: When you are loading data then you may get some special characters like @#$%...e.t.c.then BW will throw an error like Invalid characters then you need to go through this RSKC transaction and enter all the Invalid chars and execute. It will store this data in RSALLOWEDCHAR table. Then reload the data. You won't get any error because now these are eligible chars done by RSKC.
    2) IDOC Or TRFC Error: We can see the following error at u201CStatusu201D Screen:Sending packages from OLTP to BW lead to errorsDiagnosisNo IDocs could be sent to the SAP BW using RFC.System responseThere are IDocs in the source system ALE outbox that did not arrive in the ALE inbox of the SAP BW.Further analysis:Check the TRFC log.You can get to this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".Removing errors:If the TRFC is incorrect, check whether the source system is completely connected to the SAP BW. Check especially the authorizations of the background user in the source system.Action to be taken:If Source System connection is OK Reload the Data.
    For more errors and solutions go thorugh the link below
    http://indelasap.blogspot.com/2009/04/sap-bi-production-support-issues.html
    Regards,
    Marasa.

  • Common Process chain errors

    Hi friends,
    Can u please explain cause of below errors in process chain and how to rectify the problem ?
    1. Deadlock error.
    2. Error in unit conversion
    3.Error 1 in update
    4.Processing no data
    5.Caller 70 missing
    6.Idoc not processed completely.
    Thanks...
    Bala

    Hi,
    /people/mona.kapur/blog/2008/01/14/process-chain-errors
    Deadlock
    http://help.sap.com/saphelp_nw04s/helpdata/en/2e/44934257a5c86ae10000000a155106/frameset.htm
    Dead Locks
    2. Error in unit conversion
    \Units of measure
    3.Error 1 in update
    When Src file is already open or not accessible.
    4.Processing no data
    theres no data selected after extraction
    5.Caller 70 missing
    "• This error normally occurs whenever BW encounters error and is not able to classify them. There could be multiple reasons for the same
    1) Whenever we are loading the Master Data for the first time, it creates SID’s. If system is unable to create SIDs for the records in the Data packet, we can get this error message.
    2) If the Indexes of the cube are not deleted, then it may happen that the system may give the caller 70 error.
    3)Whenever we are trying to load the Transactional data which has master data as one of the Characteristics and the value does not exist in Master Data table we get this error. System can have difficultly in creating SIDs for the Master Data and also load the transactional data.
    4) If ODS activation is taking place and at the same time there is another ODS activation running parallel then in that case it may happen that the system may classify the error as caller 70. As there were no processes free for that ODS Activation.
    5) It also occurs whenever there is a Read/Write occurring in the Active Data Table of ODS. For example if activation is happening for an ODS and at the same time the data loading is also taking place to the same ODS, then system may classify the error as caller 70.
    6) It is a system error which can be seen under
    the “Status” tab in the Job Over View.
    solution:
    "• If the Master Data is getting loaded for the first time then in that case we can reduce the Data Package size and load the Info Package. Processing sometimes is based on the size of Data Package. Hence we can reduce the data package size and then reload the data again. We can also try to split the data load into different data loads
    • If the error occurs in the cube load then we can try to delete the indexes of the cube and then reload the data again.
    • If we are trying to load the Transactional and Master Data together and this error occurs then we can reduce the size of the Data Package and try reloading, as system may be finding it difficult to create SID’s and load data at the same time. Or we can load the Master Data first and then load Tranactional Data
    • If the error is happening while ODS activation cause of no processes free, or available for processing the ODS activation, then we can define processes in the T Code RSCUSTA2.
    • If error is occurring due to Read/Write in ODS then we need to make changes in the schedule time of the data loading.
    • Once we are sure that the data has not been extracted completely, we can then go ahead and delete the red request from the manage tab in the InfoProvider. Re-trigger the InfoPackage again.
    • Monitor the load for successful completion, and complete the further loads if any in the Process Chain.
    6.Idoc not processed completely.
    Here the request remains yellow (in process) and with the same details (as seen in the details tab of the monitor) for an abnormally long time. Many-a-times, the port for communication is not open and re-starting the load helps. For long running jobs, it may not be advisable to restart the extraction               
    Contact the BASIS administrator to push the IDOC.                         
    Thanks

  • Process chain error in BI7.0

    Hai
    Im trying to load the data from the flat file to DataStoreobject in BI 7.0 by using the process chain .
    I build the process chain like below
    start process -> infopackag -> DataTransferProcess -> ODS activation data.
    Then i chek the process chain . then it is ok .
    Then i activate the process chain and then i schedule the process chain .
    Then it gives 'job higher priority A'  , 'Job higher priority B' , 'Standard Priority C' . Then i select the 'Standard priority C'.
    Then im getting the following error saying that
    <b>Job BI_PROCESS_DTP_LOAD could not be scheduled. Termination with returncode 8</b>
    Then i looked into ST22 . i got the following error <b>MESSAGE_TYPE_X</b>
    Please give me the solution.
    kumar

    Hi
    For this error return code 8 go to T-code SU 01 in that select copy icon then give copy from sapuser to ALEREMOTE
    . eventhough it will occurs go to SU01 copy from ALEREMOTE then in that give profiles ok if its ok give to  me points
    Thanks
    Hanu
    Edited by: chitluru hanumanthu on Jun 19, 2008 5:12 PM

  • Process chain error at infopackage

    Hai
    Im trying to load the data from flat file into DataStoreObject by uisng process chian in BW-2004s.
    I build the process chain like below
    start -> InfoPackage -> DTP -> Activation Of ODS data.
    Im gettin error at the Infopackage level and it becomes red. I already loaded data into the datasource/psa in BW-2004s.
    So how can i look for the error details at infopackage process level.
    pls let me know
    kumar

    Hi,
    just right click on the process which got fail means red in color, and details ... >details ....there must be given you some errors find out ...you can find the solution ...or else you can just let me know that error i may solve that .. all the best.
    Regards,
    vishali.

  • Reg:process chains could be started manually and automatically

    Hi
    Each process chain could be started manually and automatically
    >If i want to start the process chain manually, how should i start and what are the settings shall i mark
    >If i want to start the process chain automatically, is there any tool are there to start the process chain at that particular time
    Plz clarify my doughts it is use full too me
    Thanks & Regards
    manikanta

    Hello,
    PC can be started both manually and automatically.
    Every PC has a start variant, when you right click on the start variant and go in the edit option, select the option direct scheduling. Then in change selection, check the box immediate and keep the periodic job at the bottom unchecked.
    Hit the tick, save on the other screen. And when back on the PC screen, from the menu option select the schedule option.
    This will run the chain manually.
    To run it automatically, follow the same procedure but instead of using immediate choose, data and time, provide date and time when you want to run, you can check periodic option if you want the chain to run daily, weekly or monthly.
    Regards,
    Shashank

  • Process chains:Errors Occured..

    i have selected my info objects 0CRM_PROD in rsa1 and  i entered CALL MONITOR FOR BI OBJECT and then i got a monitor screen in that succesfull(42) it says...in that i have selected 0PRODUCT  > TODAY DATE>
    I FOUND THAT CR1 LIENT 100
        02:04:56 (4 From 4 Records)i entered twise on this and i got HEADER  STATUS   DETAILS tabs...
    in above DETAILS tab
    we got a red colour in
    Process chains : Error Occured
    MD : Business partner & Product
    like this... can u please suggest me the resolution for this...
    please help me in this regard , thanks

    Hi -
    Please check
    1) Do you have any Red request
    2) Did you run delta twice
    Regards
    Astoria

  • What are some of the process chain errors one comes across?

    hi friends
    What are some of the process chain errors one comes across?

    Hello Kiran,
    Here are some of the errors that come across...
    -> Rollup not possible, no filled aggregates available
    -> Error when starting the extraction program
    -> The process step locked by another changerun
    -> Info objet does not contain alpha confirming values
    -> Errors due to non activated objects
    -> Errors due to duplicate records
    -> Errors due to locking
    -> Problems because of connection problem between source and bw systems
    -> Problems due to RFC
    Hope this helps you
    Cheers
    SRS

  • BI Process Chain - Error DTP

    Hi Friends
    I have a Question regarding executing error DTP.
    We are going live next month. In a metachain we are loading 3 master data process chains and one transaction data process chain and the meta chain is a daily load.
    There are duplicate records in the error stack which ended the process chain with errors and also failed the next day load as the duplicate records in the error stack were not fixed. And its a daily master data load triggered in one of the process chain.
    I had fixed the records in error stack and enabled handle duplicate records setting in error DTP and tried to save it.
    It prompted a message
         "Note, for time-dependent data the source field
          containing DATETO information must not be selected
          in the semantic DTP key."
    [do i need to change the handle duplicate record setting for the main DTP also?]  I need to execute this error DTP and it should execute the remaining pending/cancelled processes in that process chain.
    It should not trigger further loads of the process chains following this process chain even if I manually execute the error DTP. Because the following process chains were successful as there were no dependencies between the process chains.
    even though i guess sometimes it happens that it triggers further loads in the process chains for some reason which are not dependent.
    Good answers will be definitely rewarded.
    Thanks
    Lavanya...

    Hi,
    This is an information message. Go ahead and enable the duplicate key handling flag and then execute the error DTP.
    That should load the data successfully.
    Cheers,
    Kedar

  • How does the GR processing time affect the scheduling of the process order & the latest start date in the operation.

    Hi
    Can anyone explain  how does the GR processing time affect the scheduling of the process order & the latest start date in the operation overview.

    Hi
    GR processing time means number of workdays required after receiving the material in storage.
    Check this link:GR Processing time
    Regards,
    Anupam Sharma

  • Step by Step documents for Process Chain Error Handling with Screen Shots

    Hi
    Is anybody having Step By Step Documents for Process Chain Error Handling with Screen Shots ?. Please forward it to me to my e-mail [email protected] .  I will reward points to u immediately.
    bye
    Aamira Khan

    Hi,
    You can find lots of topic related to process chain issues in SDN.Please make a search in SDN.
    https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_library&query=process+chain&adv=true&sdn_author_name=&sdn_updated_on_comparator=ge&sdn_updated_on=&sortby=cm_rnd_rankvalue
    Regards.

  • Process chains errors

    Hi,
    Any one can plz send the process chain errors in BI.I am in support so plz give some process chain errors.
    sekhar.
    Bye.

    Hello Sekhar,
    Please find the links might be it can help you..
    Re: Process chain error for infopackage
    process chains errors
    http://help.sap.com/saphelp_nw70/helpdata/en/d3/53e03b8235953ee10000000a114084/content.htm
    Please search in SDN you find more help..
    Thanks,
    Geeta

  • Error: "Depreciation start date required in old assets data (please enter)"

    When , I use transaction AS91 , for an asset , with book depreciation key  = 0000, the system shows this error:"Depreciation start date required in old assets data (please enter)",
    somebody could help me with this please?

    Check if the depreciation start date has got populated in the tab for depreciation areas in AS91.
    Usually this gets populated based on capitalization/creation date.If not then try to enter this manually.
    Thanks and regards
    Kedar

Maybe you are looking for