Process chain failed at COLLAPSE PROCESS TYPE ?
HI all ,
we have one process chain , in that we have used oe process type collapse for the cube .
it got failed , but in the manage screen , under request status , it is showing tick mark i.e collapse successfully .
give me some solution..
regards ,
Srinivas .
Hi Venkatesh,
thank you, i have resolved this issue.
i have checked in SM12 and there is no lock on the particular info cube then i repeated the process.
the process chain failed at the stage of rolling up infocubes and the next triggred process was successfull even though i repeated the process chain.
my concern is how the next process triggrred and it was successful when rollup process failed.
can you please explain me
thanks
Similar Messages
-
Process chain failed at AND process type ?
hi all .
Process chain failed at AND process type ?
and it is giving message Job cancelled after system exception ERROR_MESSAGE .
what is the reason & solution .
regards ,
srinivas ,Hi,
That depends on the system behaviour... There is no issue in that... You can repeate the process.. If there is no repeat option available then you can on the detail view.. there is a chance that you will get a repeat option there.. If not then copy the chain.. remove the loaded process and add one starter chain an continue the chain in immediate mode...
Regards
Sajid khan -
What will u do if process chain fails?
Hi gurus
What will u do if process chain fails?
Thank in advance?
RajuHi rajaiah
Firstly if a process chain fails, identify the process that has failed and on the context menu of the failed process you will get an option called display message where you can find the exact reason for the failure. A process chain can fail in many cases. So first try to find the error occured . For example if a process chain has failed due to invalid records then we have to edit the psa and reload the data from psa to data target (reconstruction). Based on the error message you need to take the necessary actions...
Hope this may help you.. please assign points if found helpful.
Regards,
Harish. -
Using Alert Framework to send email notifications when Process Chain fails
Hi Everyone,
I've configured ALRTCATDEF in Solution Manager, selected the alerting option for Process Chains in - RSPC > Attributes > Alerting, but it looks like whenever any process chain fails, an email notification will be sent to the same recipients.
Is there anyway to have an ALRCATDEF - alert category for different process chains, so that different recipients receive notifications for different Process Chains.
Thanks,
KenInteresting....I was actually hoping for different recipients for different process chains.
E.g. for our
CRM process chain - Support Team 1
FI process chain - Support Team 2
and so on and so on.
I think the only way may be creating a custom process type and implementing a class for this process type that calls function SALRT_CREATE_API. Then adding this process type to the process chain, with a different variant for each.
However if anyone knows a way to do this in a SAP standard way using the Alert Framework, that would be great.
Cheers,
Ken -
Process chains failing - There is no path from LOADING (ipak) to PSAPROCESS
Hello
In the load process type of my process chain I am loading till PSA.
I am using the process type - update from PSA for 3 ODSs and loading all of them to the cube. one of these three process types is finishing successfully. For rest of the two I get following errors:
1. There is no path from [IPAK name] to PSAPROCESS [variant name]
2. Variant doesnot contain a valid combination request/data target
For the two process types which are failing, the request is not being picked up from PSA. Can you please suggest what can be the reason and how to fix it?
Thanks & Regards
ShreyasHi Shreyas,
How is it going on today , is there any change or same thing happened?.
I hope you have followed the below steps for re activation and schedule.
1. Go to process chain maintain view and in the menu option
Process Chain --> "Remove from schedule".
2.Process Chain --> "Activate" .
3.Process Chain --> "Activate and schedule" ( Note: Don't do this step If it is immediate start )
If the above steps does not work may be you can do one more thing , that is copy the whole process chain in to new one and create a new start event .
I had seen this type of errors and after activate and schedule it went fine.
Hope this will help.
Cheers
Manju -
If Process Chain Fail in Production?
Hi to all,
Please can anyone tell me, if there is process chain running in production and any process type fail or process chain fail ?.
Does we need to repair it, or repeat it or, restart it.
How to identify what should be done and how to do it.
I shall be thankful to you for this.
Regards
Pavneet RanaHi
Based on the error occur in process chain step, we have to monitor the error.
If the error or red color occur when you schdule and check the log view, then right click the error process step and select display messages, check the error clearly by using process monitor.
based on the error you have to react.
this links will helpful to you.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/502b2998-1017-2d10-1c8a-a57a35d52bc8?QuickLink=index&overridelayout=true
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00a1f389-ec7c-2c10-04bc-9d81b3084171?QuickLink=index&overridelayout=true
Edited by: Srikanth.T on Jan 23, 2012 11:29 AM -
Sending mail to GROUP ID when a process chain fails.
Hi All,
Can one suggest me, how to send a failure/success mail to a Group mial id when a process chain fails.
I am awere about sending mails to individual mail id's when a any process fails or succed. I want to know the group ID creation part & how to tag the same SOCT.
Thanks in advance.
BR,
Kiron.hi,
The Distribution List/Group_id is created in SO23 transaction.
hope it is helpful to u
thanks -
Send sms when bi process chain failed
Hi SAP Gurus,
Is some one inform me how is it possible to send an SMS when a process chain failed ?
Is there a possibility to paramter something on the SAP BI system to execute this action ?
ThanksHi,
I dont think there is an SMS option . But an email can be send when a Process chain gets failed. The detail step for this is
1. go to ALRTCATDEF
2. select classification "Process Chains"
3. click on display/change
4. double-click on "error in a process of a process chain"
5. click on "fixed recipients"
6. write in your username (you have to maintain your e-mail address in SU01 for that to work)
7. save
8. In RSPC, take the required process chain
9. go into edit mode
10. from the menu, select Process chain -> attributes -> alerting
11. check "send alerts if errors occur"
Regards
Lekshmi -
Process chain failed on creating Indexes
Hello All,
Since a few days our process chains have failed because of an impossibility to create Indexes.
Job BI_PROCESS_INDEX can run for 3 days without any result. Usually it runs during 4 seconds.
When we stop this job, the next day the process chain fails to delete indexes.
If we run RSRV for our infocube we get the following error :
ORACLE: The status of index /BI0/E0PA_C01~040 is INVALID
Our DBA says it's a BW issue.
Any idea to solve this issue ?
Thanks &
Regards
CatherineIf we run RSRV for our infocube we get the following error :
ORACLE: The status of index /BI0/E0PA_C01~040 is INVALID
I hope u followed the below to check cube.
RSRV -> Tests in Transaction RSRV -> All Elementary Tests -> Database -> Database Statistics for an InfoCube and its Aggregates
In that case, did u execute "Correct Error" (button in toolbar) to fix that error ?
If that does not fix the issue,
cannot u delete (button in toolbar) and reschedule Process chain (delete index -> DTP load to Cube -> create index) to create index ?? -
Process chain Failed!!! please help
Hi All
Process chain failed at activation of ODS process and the error message is
Cannot activate request 0000006602(REQU_3YG2WB3F2C48PDD4X4BOW5FYS) of DataStore object
Activation of M records from DataStore object RC2CTD01 terminated
Please Help!!!
ThanksI've checked in the monitor screen it's giving me the below error under status tab
Request still running
Diagnosis
No errors found. The current process has probably not finished yet.
System Response
The ALE inbox of BI is identical to the ALE outbox of the source system
or
the maximum wait time for this request has not yet been exceeded
or
the background job has not yet finished in the source system.
Current status
All of the packets from the source system arrived
I've repeated the process and it is asking for seconds...so how much should i give in the second field....
Please help!!! -
Process chain failed during DTP
operation generate could not be carried out for the request no ...
My process chain failed while DTP . Then i right clicked on it and clicked on display messages then the error is
operation generate could not be carried out for the request while DTP in process chain
Please give me the solutionhi,
chk if the DTP performs load with info spoke.
if so chk the source and destination defintion of the infospoke definition.
Ramesh -
Process Chain failed at Delete PSA event level
HI Every one,
I am monitoring process chains, which are running on daily basis.
I have one <b>Delete PSA</b> process chain, this chain contains only two events
1. Start Event 2. Delete from PSA.
Process chain failed at<i> Deleted from PSA</i> event level.
Below is the error message I got from the process chain screen.
"Data inconsistency in /bic/b0000231000 table,partition was not deleted"
"Delete request REQU_4353ACARKJNY70Z5F11 from PSA 8ZMMOM...."
Please help me by giving possible reasons for this error message and solution for this problem.
Thanks in advance.
Regards,
Narayana K.hi,
Are you deleting the PSA requests using abap program?
Regards,
Vijay -
Scheduling of a process chain in two meta process chains
Hi,
( Meta process chains - X, Z
X - runs at 2 a.m. daily
Z - runs after every two hours daily from 9 a.m. to 10.30 p.m
Process chain - Y is to be included in X & Z)
There is a Meta process chain X which is scheduled for 2 a.m. daily. This meta process chain contains another
process chain Y.
I want to schedule another Meta process chain Z which executes after every two hours daily. Now I want to include process chain Y in Z, with the condition that if system time is 11 a.m. or later than it only then it should be scheduled.
Since this process chain is contained in Meta process chain X, its start variant
has Immediate Start selected. I don't want to change this start variant.
Is there any option or event through which this can be achieved?
Thanks & Regards,
ManishaYou need a program to trigger event (using function module BP_EVENT_RAISE). You can include this program and variant only in the process chain as a ABAP process type.
The program will have a condition based on the time (you can use parameters to make it dynamic), when ever the specified time condition will be satisfied, it will trigger the event.
So whenever you will execute the process chain X, everytime ABAP process type will also be executed. But the event will be raised only at a specific time, so is it process chain Y. Therefore it will not affect process chain X execution. -
Process chain: scenario on Interupt process
Hello,
currently I'm exploring a BI in NW2004s.
In the area of process chain I found a process type
called Interrupt process.
Can someone give we a scenario on that process type?
Regards & Thanks,
GuidoHi...
go to RSPC and now click Process Types button--under General Services node is interrupt process
Application scenario:"
Apply multiple start conditions in a process chain
With the process type Interrupt, you can interrupt the processing of a process chain until a given condition has been satisfied. In this way you can, for example, define conditions that need to be satisfied in addition to the start condition defined in the start process so that the entire process chain or parts of it can be processed."
refer thread:
http://help.sap.com/saphelp_nw70/helpdata/en/58/9c6c4251e4c153e10000000a1550b0/frameset.htm -
Is it possible to run process chain from the certain process/point?
Hello
Is it possible to run process chain from the certain process?
How?
ThanksHello,
yes it possible! use the following steps.
1. Goto the process which you want the chain to start from.Goto display messages>> Chain tab. In the generated instance note the variant and instance.
2. Goto table RSPROCESSLOG and give variant and instance and get logid details.
3. t codese37>> run FM RSPROCESSFINISH.
4. give the deatils u have got in RSPROCESSLOG table here and say execute.
This will solve ur problem.
Hope this helps!
Reg
Deepmala
Maybe you are looking for
-
I cant get the tunes store to open,can anyone help me?
I can get Itunes to open,but when I try to get to the store it freezes and will not open,can anyone help me,,I would appreciate it greatly..
-
Why c an't I place a bid on zBiddy??????
Why can't I place a bid on zBiddy?
-
PR Release date in TAB Quantity/Dates
Hi Experts , When i am creating a PR then In the TAB>Quantity/Dates the release date is coming same as the delivery date . As per my opinion it by default should be same as the PR requested date .and when it release by( me54 or me55) .then it will up
-
Hi, 1. What are FI Validation and Substitutions? How they are used? which topic they are related to? Can anybody give me some examples? 2. What are Web RFC? 3. How to find Enhancements in ABAP? Please Provide the <b>Transaction Codes</b> for all abov
-
Windows 7 airport utility does not recognize my airport extreme
My iphone connects to my airport extreme and the airport utility sees it. So does my ipad and my friends laptop. When I use wifi or wired connection (to lan port) from Windows 7 laptop to my airport extreme. The airport utility does not "see the extr