Process chain failed at info package level

hi experts,
i have a process chain for IS_QLTMR, it is loading data to IC_QLTMR, every day it is running successfully, but today at infopackage it has failed in details tab it is showing bellow error message.
Object requested is currently locked by user ALEREMOTE
what is it mean, how can i solve my problem,
please advice me to solve this,
thanks in advance,
venkat

This time its correct. As last time , it was locked, so may be it has picked only 18000 records before lock occures.
However, to know the correct data, go to your source system and check in RSA7 how many records are there.
For active update rule, check your update rule whther its active. If not, then you have to activate the update rule. If you are in production and you dont have authorization, then raise a ticket for this.
Thanks...
Shambhu

Similar Messages

  • Process Chain error during info package execution

    I'm trying to load master data into 0CURTYPE using process chain.
    I have created a start process and included the info package and corresponding DTP in the chain to load master data into the info object.
    On scheduling the process chain I get an error during the execution of the info package
    "Could not find code page for receiving system
    For the logical destination Q4900CL010, you want to determine the code page in which the data is sent with RFC. However, this is not currently possibe, and the IDoc cannot yet be dispatched."
    Is it relatred to some setting whihc I have missed out?
    Any help on this please?
    Thanks,

    Hi, this is a issue related to idocs in the source....
    U can contact ur BASIS team to solve this...
    From their end they have to chk the unprocessed/errored idocs in BD87...
    this issue belongs to source...
    They have to run a report:RBDAGAIN  to process the errore idoc's in the source which are in STATUS:'02'.
    This is a solution for temporarilrly basis...
    if this occurs regularly they have to change the settings in SM59..
    refer exact note for this: 784381
    rgds,

  • Process Chain failed at Delete PSA event level

    HI Every one,
    I am monitoring process chains, which are running on daily basis.
    I have one <b>Delete PSA</b> process chain, this chain contains only two events
    1. Start Event 2. Delete from PSA.
    Process chain failed at<i> Deleted from PSA</i> event level.
    Below is the error message I got from the process chain screen.
    "Data inconsistency in /bic/b0000231000 table,partition was not deleted"
    "Delete request REQU_4353ACARKJNY70Z5F11 from PSA 8ZMMOM...."
    Please help me by giving possible reasons for this error message and solution for this problem.
    Thanks  in advance.
    Regards,
    Narayana K.

    hi,
    Are you deleting the PSA requests using abap program?
    Regards,
    Vijay

  • Process chain failed at COLLAPSE PROCESS TYPE ?

    HI all ,
    we have one process chain , in that  we have used oe process type collapse  for the cube .
    it got failed , but in the manage screen , under request status , it is showing tick mark i.e collapse successfully .
    give me some solution..
    regards ,
    Srinivas .

    Hi Venkatesh,
    thank you,  i have resolved this issue.
    i have checked in SM12 and there is no lock on the particular info cube then i repeated the process.
    the process chain failed at the stage of rolling up infocubes and the next triggred process was successfull even though i repeated the process chain.
    my concern is how the next process triggrred and it was successful when rollup process failed.
    can you please explain me
    thanks

  • Process chain failed during DTP

    operation generate could not be carried out for the request no ...
    My process chain failed while DTP . Then i right clicked on it and clicked on display messages then the error is
    operation generate could not be carried out for the request while DTP in process chain
    Please give me the solution

    hi,
    chk if the DTP performs load with info spoke.
    if so chk the source and destination defintion of the infospoke definition.
    Ramesh

  • Using Alert Framework to send email notifications when Process Chain fails

    Hi Everyone,
    I've configured ALRTCATDEF in Solution Manager, selected the alerting option for Process Chains in - RSPC > Attributes > Alerting, but it looks like whenever any process chain fails, an email notification will be sent to the same recipients.
    Is there anyway to have an ALRCATDEF - alert category for different process chains, so that different recipients receive notifications for different Process Chains.
    Thanks,
    Ken

    Interesting....I was actually hoping for different recipients for different process chains.
    E.g. for our
    CRM process chain - Support Team 1
    FI process chain - Support Team 2
    and so on and so on.
    I think the only way may be creating a custom process type and implementing a class for this process type that calls function SALRT_CREATE_API. Then adding this process type to the process chain, with a different variant for each.
    However if anyone knows a way to do this in a SAP standard way using the Alert Framework, that would be great.
    Cheers,
    Ken

  • Sending mail to GROUP ID when a process chain fails.

    Hi All,
    Can one suggest me, how to send a failure/success mail to a Group mial id when a process chain fails.
    I am awere about sending mails to individual mail id's when a any process fails or succed. I want to know the group ID creation part & how to tag the same SOCT.
    Thanks in advance.
    BR,
    Kiron.

    hi,
    The Distribution List/Group_id is created in SO23 transaction.
    hope it is helpful to u
    thanks

  • Routines for File name at External Data in Info Package level.

    Hi All,
    Can any one give the example codes of how to write the routine for Files at External Data in Info Package level.
    Regards
    srinivas

    Hi Srinivas
    Here iam attaching a sample code in the infopackage level this code is used to select the Current version from TVARV table ..based on the version from variable the data is loaded into the ods..
    data: l_idx like sy-tabix.
              read table l_t_range with key
                   fieldname = 'FISCPER'.
              l_idx = sy-tabix.
    tables tvarv.
    data: v_prever(6)   type c,
          v_fiscper(7)  type n.
      clear tvarv.
      select single low
       from tvarv
       into v_prever
      where name = 'ZBSK_PREVIOUS_RELEASED_VERSION' and
            type = 'P' and
            numb = '0000'.
    concatenate v_prever(4) '0' v_prever+4(2) into v_fiscper.
       concatenate  '0' v_prever+4(2) v_prever(4) into v_fiscper.
            l_t_range-low = v_fiscper .
              modify l_t_range index l_idx.
    Hope the above code helps you..
    let me know in case of any concerns.. and further help needed..
    bye
    Shu Moh..

  • If Process Chain Fail in Production?

    Hi to all,
    Please can anyone tell me, if there is process chain running in production and any process type fail or process chain fail ?.
    Does we need to repair it, or repeat it or, restart it.
    How to identify what should be done and how to do it.
    I shall be thankful to you for this.
    Regards
    Pavneet Rana

    Hi
      Based on the error occur in process chain step, we have to monitor the error.
    If the error or red color occur when you schdule and check the log view,  then right click the error process step and select display messages, check the error clearly by using process monitor.
      based on the error you have to react.
    this links will helpful to you.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/502b2998-1017-2d10-1c8a-a57a35d52bc8?QuickLink=index&overridelayout=true
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00a1f389-ec7c-2c10-04bc-9d81b3084171?QuickLink=index&overridelayout=true
    Edited by: Srikanth.T on Jan 23, 2012 11:29 AM

  • What will u do if process chain fails?

    Hi gurus
    What will u do if process chain fails?
    Thank in advance?
    Raju

    Hi rajaiah
    Firstly if a process chain fails, identify the process that has failed and on the context menu of the failed process you will get an option called display message where you can find the exact reason for the failure. A process chain can fail in many cases. So first try to find the error occured . For example if a process chain has failed due to invalid records then we have to edit the psa and reload the data from psa to data target (reconstruction). Based on the error message you need to take the necessary actions...
    Hope this may help you.. please assign points if found helpful.
    Regards,
    Harish.

  • Send sms when bi process chain failed

    Hi SAP Gurus,
    Is some one inform me how is it possible to send an SMS when a process chain failed ?
    Is there a possibility to paramter something on the SAP BI system to execute this action ?
    Thanks

    Hi,
    I dont think there is an SMS option . But an email can be send when a Process chain gets failed.  The detail step for this is
    1. go to ALRTCATDEF
    2. select classification "Process Chains"
    3. click on display/change
    4. double-click on "error in a process of a process chain"
    5. click on "fixed recipients"
    6. write in your username (you have to maintain your e-mail address in SU01 for that to work)
    7. save
    8. In RSPC, take the required process chain
    9. go into edit mode
    10. from the menu, select Process chain -> attributes -> alerting
    11. check "send alerts if errors occur"
    Regards
    Lekshmi

  • Process chain failed at  AND process type ?

    hi all .
    Process chain failed at  AND process type ?
    and it is giving  message      Job cancelled after system exception ERROR_MESSAGE     .
    what is the reason & solution .
    regards ,
    srinivas ,

    Hi,
    That depends on the system behaviour... There is no issue in that... You can repeate the process.. If there is no repeat option available then you can on the detail view.. there is a chance that you will get a repeat option there.. If not then copy the chain.. remove the loaded process and add one starter chain an continue the chain in immediate mode...
    Regards
    Sajid khan

  • Process chain failed on creating Indexes

    Hello All,
    Since a few days our process chains have failed because of an impossibility to create Indexes.
    Job BI_PROCESS_INDEX can run for 3 days without any result. Usually it runs during 4 seconds.
    When we stop this job, the next day the process chain fails to delete indexes.
    If we run RSRV for our infocube we get the following error :
    ORACLE: The status of index /BI0/E0PA_C01~040 is INVALID
    Our DBA says it's a BW issue.
    Any idea to solve this issue ?
    Thanks &
    Regards
    Catherine

    If we run RSRV for our infocube we get the following error :
    ORACLE: The status of index /BI0/E0PA_C01~040 is INVALID
    I hope u followed the below to check cube.
    RSRV -> Tests in Transaction RSRV -> All Elementary Tests -> Database -> Database Statistics for an InfoCube and its Aggregates
    In that case, did u execute "Correct Error" (button in toolbar) to fix that error ?
    If that does not fix the issue,
    cannot u delete (button in toolbar) and reschedule Process chain (delete index -> DTP load to Cube -> create index) to create index ??

  • Process chain Failed!!! please help

    Hi All
    Process chain failed at activation of ODS process and the error message is
    Cannot activate request 0000006602(REQU_3YG2WB3F2C48PDD4X4BOW5FYS) of DataStore object
    Activation of M records from DataStore object RC2CTD01 terminated
    Please Help!!!
    Thanks

    I've checked in the monitor screen it's giving me the below error under status tab
    Request still running
    Diagnosis
    No errors found. The current process has probably not finished yet.
    System Response
    The ALE inbox of BI is identical to the ALE outbox of the source system
    or
    the maximum wait time for this request has not yet been exceeded
    or
    the background job has not yet finished in the source system.
    Current status
    All of the packets from the source system arrived
    I've repeated the process and it is asking for seconds...so how much should i give in the second field....
    Please help!!!

  • Process chain failed with RSDMD199

    Hi All,
    While loading data through process chain, which includes master data and transactional data,
    the job failed.
    and the message is : RSDMD199
    also when i checked in details tab in RSMO, i got meaasage like:
    3510 data records in table /BIC/PZORD_NUM marked for deletion
    also this job runs with 3 data packages, out of which 1st data package failed while updating in target.
    But completed data package also has the same message like
    3510 data records in table /BIC/PZORD_NUM marked for deletion
    So can anybody explain me which type of error this is.......???
    Thanks in advance,
    Vishal

    hi,
    see  Note 788588 which addresses the RSDMD199 error.
    So shortly summarizing the problem of RSDMD 199.This error occurs due
    to following reasons:
    1. Master Data tables or indexes are inconsistent at the database level.
    2. Master Data is inconsistent for the characteristic (RSRV check)
    3. Same characteristic value spread across different datapackages and
    they are loaded in parallel.
    4. Parallel loading of time-dependent attributes or texts.
    5. Delta update of an ODS object into a characteristic
    6. Simultaneous data load into the following objects :
        a. Navigational Attributes of the characteristic
        b. Compounding Objects of the characteristic.
        c. Characteristics that are references of this one.
        d. Trasaction Data - Into Info Cubes that contain this
           characteristics
        e. ODS request activations - When the chacteristic is part of the
        ODS object.
    Some of the above points are described in detail in the note 668466.
    Colin

Maybe you are looking for