Process chain failed due to activation of a DSO

Hi friends,
Three four days back the process chain has been failed due to the activation error.The issue was with data and i have deleted the request in manage screen and reloaded again as repeat of delta with corrections in PSA. Which is afterwards activation is successful. Now process chain is getting failed daily saying that request is not present in the DSO( Request is no longer exists in the DSO ). But manual activation of DSO is successful.
Please help me in this reagrd.
Regards,
anil
PS: I tried by removing process chain from scheduling and rescheduling back.

Hi........
Deleting request from the PSA will not help............what is the update mode of ur ODS..........if it is overwritten............then no probs...load the request again in the target...........if not..........then do one thing...........push the request again in the target.........then...........make the QM status red................then delete the request again............just check whether u face the same issue again or not...........
Generally we face this issue............suppose we load a delta request successfully in the target.........then we delete the request without making the QM status red............and after that next delta also loaded............then while activation...............it will ask for the deleted request...........I think there is some confusion...........and u can try the trick..............it may work............
Regards,
Debjani........

Similar Messages

Infopackage in process chain failing due to short dump on regular basis.

HI Experts,
There is a daily process chain in which one of the element (infopackage) fails due to short dump on regular basis (At least twice in a week) please find the message below
Runtime Errors         DBIF_RSQL_SQL_ERROR
Exception              CX_SY_OPEN_SQL_DB
Short text
SQL error in the database when accessing a table.
And in job log it is showing ARFCSTATE = SYSFAIL
We are able to resolve it just manual update and the process goes fine no issues but my question here is what is the exact reason for this and how to resolve it permanently or decrease the frequency of the error.
Please if any one can tell the root cause and the solution to avoid the issue in future on regular basis.
and also can any one elaborate what is ARFCSTATE = SYSFAIL,for trfc check we don't have access to SM58 in ECC side
and trfc is fine in bw side
Appreciate for not giving the general solutions like repeated solutions already posted in SDN
with regards,
musai

You can contact your BASIS person he can help you reg table space issue. it says used space is 98% and free space is 1.03%.
ask your basis to set a threshold to check the space and send a mail notification to all daily regarding the space allocation and utilization.
ARFCSTATE = SYSFAIL means the TRFC did not processed properly to the BW system from source.
Monitoring object with information about tRFC and qRFC calls that are waiting to be executed in this system; after they have been executed, they are deleted from table ARFCRSTATE.
Are there any hung TRFCs which are not processed to BW side. have you checked it
first check
load monitor -- menu -- environment -- job overview -- status of job(is it finsihed or not?) - check the job log -- ther try to find out the hung TRFc
press find --tyep "sysfail" ok -- it will display all the hung or fialed TRFCs which are not processed to BW system.
if you find the hung TID with respect to your load.. next goto SM58 trasaction to process the trfcs manually or use the load monitor menu -- environment -- transaction RFC -- source sys -- it will take you to same SM58 screen -- click F8 it will display the hung TRFc in that duration.
select the TRFc and click on F6 to process them manually.
also check the loackwaits anddead locks in ST04/DB6COCKPIT.( ask basis to check) if any dead locks are there they will take care of it.
check for short dumps in st22 if any and try to analyse.
Check the SM21 system logs.

Master Data Process chains failing due to special charecters?

hi experts,
we have done all the master data(FI,SD,LO,QM,PM,MM,PP,PS) and created process chains and transported into production system.
when we run the process chains we are facing lot of issues regarding special charecters.
for example. 0MAT_VEND_ATTR Data source.
MATERIAL VENDOR (field - IDNLF).
'UDGÅET
&''UDGÅR
&''UDGÅET
&''36/5599/LED./FÆLLES
&''SØTRANSPORT &
those are the special charecters are coming when i try to execute through RSKC the above Material Vendors, its giving different special chars for different MATERIAL VENDORS like below.
FÆLLESSØTRANSPORT
04/5160/FORSØGSAFD.
(5150)FORSØGSAFD.
like that there are about 15 master data chains are failing.
due to that reason the below transcation chars are not executing.
please suggest me is there any routine or is there any procedure to take care of unpredicted special charecters loading successfully into BW.
regards
venuscm

I don't think its a global setting problem.
Permit the char in RSKC...
Check with the functional team why they are getting Special char values in the loads. ask them to rectify the special char so that you can extract the same to BW side.
go through the blog links provided earlier in my post...
Check the below link which might be of some use to you,..
/people/jyothi.velpula/blog/2010/12/23/removing-invalid-characters-using-field-routine
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0afbb81-f219-2c10-4181-b20f6b10e373?quicklink=index&overridelayout=true
Edited by: prashanthk on Jan 3, 2011 5:35 PM

Process chain failing (due to back ground jobs)

Dear Friends
Did anybody help me in this topic.
The DTP's of the particular process chain is failing frequently.
The reason is background jobs causing error
why this happens every time?
Did parallel data loading in the DTP may cause any backgound error?
Is it possible for only one update to the DTP at a time?
Thanks in advance for your replies
With Regards
Riyad

Dear,
Check may be helpful and search SDN you will find many related posts.
Error Transporting Process Chain with 2 DTPs
Regards,
Syed Hussain.

What will u do if process chain fails?

Hi gurus
What will u do if process chain fails?
Thank in advance?
Raju

Hi rajaiah
Firstly if a process chain fails, identify the process that has failed and on the context menu of the failed process you will get an option called display message where you can find the exact reason for the failure. A process chain can fail in many cases. So first try to find the error occured . For example if a process chain has failed due to invalid records then we have to edit the psa and reload the data from psa to data target (reconstruction). Based on the error message you need to take the necessary actions...
Hope this may help you.. please assign points if found helpful.
Regards,
Harish.

Why will Process chain fail..

Hello,
Could you please provide me the reasons for failing process chains.
Thanks in advance,
G Raghu

Hi...........
1) Suppose a PC starts twice at the same time............then Start Process will fail due to Lock issue........PC will not proceed.......In this situation Start process will remain yellow for a long time......and if you check the job log.........you can see that job is cancelled.................
2) Suppose when a PC is in progress........someone again schedule the PC..........then it will stop at the point........when the PC was scheduled again..........it will not proceed furthur.........
3) Status of Data provider can fail............Suppose one target is not loaded in the defined time...........then this process will fail...........PC will stop.....
4) Drop Pass through can fail...................Suppose data is loade from Y1 to Y2.............but not loaded in Y3( Propagation memory).............this process will fail.....
5) Attribute change Run can fail................
6) * Run or Skip is fail*................Suppose whatever parameters maintained in table YGTTC_SKIP_PARAM for a IP does'nt match then this process will fail.................
7) Loads can fail due to several reasons.............
Hope this helps you........
Regards,
Debjani............

Process chain Failed!!! please help

Hi All
Process chain failed at activation of ODS process and the error message is
Cannot activate request 0000006602(REQU_3YG2WB3F2C48PDD4X4BOW5FYS) of DataStore object
Activation of M records from DataStore object RC2CTD01 terminated
Please Help!!!
Thanks

I've checked in the monitor screen it's giving me the below error under status tab
Request still running
Diagnosis
No errors found. The current process has probably not finished yet.
System Response
The ALE inbox of BI is identical to the ALE outbox of the source system
or
the maximum wait time for this request has not yet been exceeded
or
the background job has not yet finished in the source system.
Current status
All of the packets from the source system arrived
I've repeated the process and it is asking for seconds...so how much should i give in the second field....
Please help!!!

Using Alert Framework to send email notifications when Process Chain fails

Hi Everyone,
I've configured ALRTCATDEF in Solution Manager, selected the alerting option for Process Chains in - RSPC > Attributes > Alerting, but it looks like whenever any process chain fails, an email notification will be sent to the same recipients.
Is there anyway to have an ALRCATDEF - alert category for different process chains, so that different recipients receive notifications for different Process Chains.
Thanks,
Ken

Interesting....I was actually hoping for different recipients for different process chains.
E.g. for our
CRM process chain - Support Team 1
FI process chain - Support Team 2
and so on and so on.
I think the only way may be creating a custom process type and implementing a class for this process type that calls function SALRT_CREATE_API. Then adding this process type to the process chain, with a different variant for each.
However if anyone knows a way to do this in a SAP standard way using the Alert Framework, that would be great.
Cheers,
Ken

Sending mail to GROUP ID when a process chain fails.

Hi All,
Can one suggest me, how to send a failure/success mail to a Group mial id when a process chain fails.
I am awere about sending mails to individual mail id's when a any process fails or succed. I want to know the group ID creation part & how to tag the same SOCT.
Thanks in advance.
BR,
Kiron.

hi,
The Distribution List/Group_id is created in SO23 transaction.
hope it is helpful to u
thanks

If Process Chain Fail in Production?

Hi to all,
Please can anyone tell me, if there is process chain running in production and any process type fail or process chain fail ?.
Does we need to repair it, or repeat it or, restart it.
How to identify what should be done and how to do it.
I shall be thankful to you for this.
Regards
Pavneet Rana

Hi
Based on the error occur in process chain step, we have to monitor the error.
If the error or red color occur when you schdule and check the log view, then right click the error process step and select display messages, check the error clearly by using process monitor.
based on the error you have to react.
this links will helpful to you.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/502b2998-1017-2d10-1c8a-a57a35d52bc8?QuickLink=index&overridelayout=true
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00a1f389-ec7c-2c10-04bc-9d81b3084171?QuickLink=index&overridelayout=true
Edited by: Srikanth.T on Jan 23, 2012 11:29 AM

Send sms when bi process chain failed

Hi SAP Gurus,
Is some one inform me how is it possible to send an SMS when a process chain failed ?
Is there a possibility to paramter something on the SAP BI system to execute this action ?
Thanks

Hi,
I dont think there is an SMS option . But an email can be send when a Process chain gets failed. The detail step for this is
1. go to ALRTCATDEF
2. select classification "Process Chains"
3. click on display/change
4. double-click on "error in a process of a process chain"
5. click on "fixed recipients"
6. write in your username (you have to maintain your e-mail address in SU01 for that to work)
7. save
8. In RSPC, take the required process chain
9. go into edit mode
10. from the menu, select Process chain -> attributes -> alerting
11. check "send alerts if errors occur"
Regards
Lekshmi

Process chain failed at COLLAPSE PROCESS TYPE ?

HI all ,
we have one process chain , in that we have used oe process type collapse for the cube .
it got failed , but in the manage screen , under request status , it is showing tick mark i.e collapse successfully .
give me some solution..
regards ,
Srinivas .

Hi Venkatesh,
thank you, i have resolved this issue.
i have checked in SM12 and there is no lock on the particular info cube then i repeated the process.
the process chain failed at the stage of rolling up infocubes and the next triggred process was successfull even though i repeated the process chain.
my concern is how the next process triggrred and it was successful when rollup process failed.
can you please explain me
thanks

Process chain failed at AND process type ?

hi all .
Process chain failed at AND process type ?
and it is giving message Job cancelled after system exception ERROR_MESSAGE .
what is the reason & solution .
regards ,
srinivas ,

Hi,
That depends on the system behaviour... There is no issue in that... You can repeate the process.. If there is no repeat option available then you can on the detail view.. there is a chance that you will get a repeat option there.. If not then copy the chain.. remove the loaded process and add one starter chain an continue the chain in immediate mode...
Regards
Sajid khan

Process chain failed on creating Indexes

Hello All,
Since a few days our process chains have failed because of an impossibility to create Indexes.
Job BI_PROCESS_INDEX can run for 3 days without any result. Usually it runs during 4 seconds.
When we stop this job, the next day the process chain fails to delete indexes.
If we run RSRV for our infocube we get the following error :
ORACLE: The status of index /BI0/E0PA_C01~040 is INVALID
Our DBA says it's a BW issue.
Any idea to solve this issue ?
Thanks &
Regards
Catherine

If we run RSRV for our infocube we get the following error :
ORACLE: The status of index /BI0/E0PA_C01~040 is INVALID
I hope u followed the below to check cube.
RSRV -> Tests in Transaction RSRV -> All Elementary Tests -> Database -> Database Statistics for an InfoCube and its Aggregates
In that case, did u execute "Correct Error" (button in toolbar) to fix that error ?
If that does not fix the issue,
cannot u delete (button in toolbar) and reschedule Process chain (delete index -> DTP load to Cube -> create index) to create index ??

Process chain failed during DTP

operation generate could not be carried out for the request no ...
My process chain failed while DTP . Then i right clicked on it and clicked on display messages then the error is
operation generate could not be carried out for the request while DTP in process chain
Please give me the solution

hi,
chk if the DTP performs load with info spoke.
if so chk the source and destination defintion of the infospoke definition.
Ramesh

Process chain failed due to activation of a DSO

Similar Messages

Maybe you are looking for