Process Chain Failed Error
Hi All,
Following is the error in process chain, please let me know the approch to resolve the issue
Source system: CRM
Batch job cancelled with following error
Job cancelled after system exception ERROR_MESSAGE
The following is the error in process chain
Process Attribute Change Run, variant has status Ended with errors (instance STRU_E0F3RXKBGPIRKR9NQCU2J7HLQ)
The action is locked by a change run.
Regards
Kareena
Hi,
Usually a BI_STRU job runs in either of the two case mentioned below:
1> Either you are manally pushing packets of a failed load may be because of lock or sid.
2> When you manually run a ACR by selecting specific info objects in rsattr transaction.
Now failing of a STRU job means the object is either locked that could be tracked in SM12( if you know the corresponding job for which the job was running).
Usually an ACR if fails in between locks all the acquired objects , the failure could be checked either in sm37 with job name prefix BI_ATTR, or in RSATTR and detail in SLG1, it could be traced in se38 too using program RSDDS_Changerun_monitor in BI 7.0 and even could be restarted from there.
For getting more information on which all objects are locked by the ACR you can use funtion module in rsdds_aggr_mod_state_get in transaction se37 too.
Hope this will be expedite.
Thax & Regards
Vaibhave Sharma.
Edited by: Vaibhave Sharma on Aug 31, 2008 9:28 PM
Similar Messages
-
If Process Chain Fail in Production?
Hi to all,
Please can anyone tell me, if there is process chain running in production and any process type fail or process chain fail ?.
Does we need to repair it, or repeat it or, restart it.
How to identify what should be done and how to do it.
I shall be thankful to you for this.
Regards
Pavneet RanaHi
Based on the error occur in process chain step, we have to monitor the error.
If the error or red color occur when you schdule and check the log view, then right click the error process step and select display messages, check the error clearly by using process monitor.
based on the error you have to react.
this links will helpful to you.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/502b2998-1017-2d10-1c8a-a57a35d52bc8?QuickLink=index&overridelayout=true
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00a1f389-ec7c-2c10-04bc-9d81b3084171?QuickLink=index&overridelayout=true
Edited by: Srikanth.T on Jan 23, 2012 11:29 AM -
What will u do if process chain fails?
Hi gurus
What will u do if process chain fails?
Thank in advance?
RajuHi rajaiah
Firstly if a process chain fails, identify the process that has failed and on the context menu of the failed process you will get an option called display message where you can find the exact reason for the failure. A process chain can fail in many cases. So first try to find the error occured . For example if a process chain has failed due to invalid records then we have to edit the psa and reload the data from psa to data target (reconstruction). Based on the error message you need to take the necessary actions...
Hope this may help you.. please assign points if found helpful.
Regards,
Harish. -
Send sms when bi process chain failed
Hi SAP Gurus,
Is some one inform me how is it possible to send an SMS when a process chain failed ?
Is there a possibility to paramter something on the SAP BI system to execute this action ?
ThanksHi,
I dont think there is an SMS option . But an email can be send when a Process chain gets failed. The detail step for this is
1. go to ALRTCATDEF
2. select classification "Process Chains"
3. click on display/change
4. double-click on "error in a process of a process chain"
5. click on "fixed recipients"
6. write in your username (you have to maintain your e-mail address in SU01 for that to work)
7. save
8. In RSPC, take the required process chain
9. go into edit mode
10. from the menu, select Process chain -> attributes -> alerting
11. check "send alerts if errors occur"
Regards
Lekshmi -
Process chain failed on creating Indexes
Hello All,
Since a few days our process chains have failed because of an impossibility to create Indexes.
Job BI_PROCESS_INDEX can run for 3 days without any result. Usually it runs during 4 seconds.
When we stop this job, the next day the process chain fails to delete indexes.
If we run RSRV for our infocube we get the following error :
ORACLE: The status of index /BI0/E0PA_C01~040 is INVALID
Our DBA says it's a BW issue.
Any idea to solve this issue ?
Thanks &
Regards
CatherineIf we run RSRV for our infocube we get the following error :
ORACLE: The status of index /BI0/E0PA_C01~040 is INVALID
I hope u followed the below to check cube.
RSRV -> Tests in Transaction RSRV -> All Elementary Tests -> Database -> Database Statistics for an InfoCube and its Aggregates
In that case, did u execute "Correct Error" (button in toolbar) to fix that error ?
If that does not fix the issue,
cannot u delete (button in toolbar) and reschedule Process chain (delete index -> DTP load to Cube -> create index) to create index ?? -
Process chain Failed!!! please help
Hi All
Process chain failed at activation of ODS process and the error message is
Cannot activate request 0000006602(REQU_3YG2WB3F2C48PDD4X4BOW5FYS) of DataStore object
Activation of M records from DataStore object RC2CTD01 terminated
Please Help!!!
ThanksI've checked in the monitor screen it's giving me the below error under status tab
Request still running
Diagnosis
No errors found. The current process has probably not finished yet.
System Response
The ALE inbox of BI is identical to the ALE outbox of the source system
or
the maximum wait time for this request has not yet been exceeded
or
the background job has not yet finished in the source system.
Current status
All of the packets from the source system arrived
I've repeated the process and it is asking for seconds...so how much should i give in the second field....
Please help!!! -
Process chain failed during DTP
operation generate could not be carried out for the request no ...
My process chain failed while DTP . Then i right clicked on it and clicked on display messages then the error is
operation generate could not be carried out for the request while DTP in process chain
Please give me the solutionhi,
chk if the DTP performs load with info spoke.
if so chk the source and destination defintion of the infospoke definition.
Ramesh -
Process Chain failed at Delete PSA event level
HI Every one,
I am monitoring process chains, which are running on daily basis.
I have one <b>Delete PSA</b> process chain, this chain contains only two events
1. Start Event 2. Delete from PSA.
Process chain failed at<i> Deleted from PSA</i> event level.
Below is the error message I got from the process chain screen.
"Data inconsistency in /bic/b0000231000 table,partition was not deleted"
"Delete request REQU_4353ACARKJNY70Z5F11 from PSA 8ZMMOM...."
Please help me by giving possible reasons for this error message and solution for this problem.
Thanks in advance.
Regards,
Narayana K.hi,
Are you deleting the PSA requests using abap program?
Regards,
Vijay -
Using Alert Framework to send email notifications when Process Chain fails
Hi Everyone,
I've configured ALRTCATDEF in Solution Manager, selected the alerting option for Process Chains in - RSPC > Attributes > Alerting, but it looks like whenever any process chain fails, an email notification will be sent to the same recipients.
Is there anyway to have an ALRCATDEF - alert category for different process chains, so that different recipients receive notifications for different Process Chains.
Thanks,
KenInteresting....I was actually hoping for different recipients for different process chains.
E.g. for our
CRM process chain - Support Team 1
FI process chain - Support Team 2
and so on and so on.
I think the only way may be creating a custom process type and implementing a class for this process type that calls function SALRT_CREATE_API. Then adding this process type to the process chain, with a different variant for each.
However if anyone knows a way to do this in a SAP standard way using the Alert Framework, that would be great.
Cheers,
Ken -
Sending mail to GROUP ID when a process chain fails.
Hi All,
Can one suggest me, how to send a failure/success mail to a Group mial id when a process chain fails.
I am awere about sending mails to individual mail id's when a any process fails or succed. I want to know the group ID creation part & how to tag the same SOCT.
Thanks in advance.
BR,
Kiron.hi,
The Distribution List/Group_id is created in SO23 transaction.
hope it is helpful to u
thanks -
Process chain failed at COLLAPSE PROCESS TYPE ?
HI all ,
we have one process chain , in that we have used oe process type collapse for the cube .
it got failed , but in the manage screen , under request status , it is showing tick mark i.e collapse successfully .
give me some solution..
regards ,
Srinivas .Hi Venkatesh,
thank you, i have resolved this issue.
i have checked in SM12 and there is no lock on the particular info cube then i repeated the process.
the process chain failed at the stage of rolling up infocubes and the next triggred process was successfull even though i repeated the process chain.
my concern is how the next process triggrred and it was successful when rollup process failed.
can you please explain me
thanks -
Process chain failed at AND process type ?
hi all .
Process chain failed at AND process type ?
and it is giving message Job cancelled after system exception ERROR_MESSAGE .
what is the reason & solution .
regards ,
srinivas ,Hi,
That depends on the system behaviour... There is no issue in that... You can repeate the process.. If there is no repeat option available then you can on the detail view.. there is a chance that you will get a repeat option there.. If not then copy the chain.. remove the loaded process and add one starter chain an continue the chain in immediate mode...
Regards
Sajid khan -
Process chain failing with error 8 in BI 7.0
Hi ,
we have upgrade the dev to BI 7.0 and I am trying to execute the process chains but it is failing with a error 8 due to the step of the job BI_PROCESS is in the name of a old user. So i have changed in process chain -Attrbutes--Execution user --- current user.So the chain has started but it has so many chains inside the Meta chain it looks i need to go to each of them and change as cyurrent user.
But is there some place where I can change globally to a Batch user/current user for these process chain in BI 7.0.If so pl let me know.Hi,
user SM37 to identify all BI_PROCESS jobs and change the User of the step in the jobs (they all should only have one step).
bye
Frank -
Attribute Change Run in Process Chain failed with SQL 942 error
Hi,
Attribute change run in th eprocess chain failed with the message " SQL Error 942" and ran succesfully after repeating the step.Searched in Forums for similar error but the solutions were not apt.
Any pointers would be of great help!!
Thanks in advance,
Bhagyarekha.Hi Bhagyarekha,
The reason behind that error could be:
An attempt is made to activate a characteristic whose compounding was replaced and whose navigation attributes were simultaneously deleted. The replacement of the compounding temporarily deletes the M view of the characteristic during internal activation. The process of deleting navigation attributes involves converting the attribute SID tables. However, the M-view of the characteristic, which has just been deleted, is needed for this conversion.
Check this SAP Note:
Note 684405 - Replacing the compounding and deleting navigation attr.
Hope it helps.
Veerendra. -
Process chain failed with Error-Status Change of Process ABAP ZL321NIMIMUUT
Hi,
process chain got failed with Error --**Status Change of Process ABAP ZL321NIMIMUUT
Save Status and Trigger Events if Appropriate**Hi Neha,
When we do the repeat after right click then we are getting this messege"--**Status Change of Process ABAP ZL321NIMIMUUT
Save Status and Trigger Events if Appropriate**"
I have come to know that there is one ABAP programe when we go to manage varient.
ABAP Programme"ZBWR_ZMYYNNINOH_CSV_CHANGE"
Maybe you are looking for
-
Adobe Photoshop CC Has Stopped Working
This discussion is similar in title to another one except that the other was specific to getting the subject message when trying to save a file. After trying many things, I discovered something that might be help in discovering the underlying reason
-
Results not updating for every row in BIpublisher
Hi all I have a Bi publisher report that is updating the results for the first row and in the second row to update the results it is picking the values from the first column itself and using the same values for all the other rows. Here is my report f
-
List of users who logged into database
Hi All. I want to know the list of users who logged in to database and the list of users for whom the password authentication is failed. I think we can get the logged in users information from v$session but i am trying to find the users list who fail
-
"An eligible Pages application was not found in the location /Applications." every time i try to update. what do i do?
-
Hidden cache files (imovie) - lost 60gb memory - can you help me recover?
Ok so here is my problem. Using the Panasonic GH2 for filming and decided to import the .mov files to my external drives via imovie, easy right? Over the period of some 800gb of imports I slowly lost 60+ gb of drive space that I have not been able