Process chain failed.. plz help
Hi frnds ,
My chain is modelled like this.
start-- local where local is again start-- program1-- program3
program2 - and Program4.
My chain failed at program1 , and program2 has got through successfully.
Program1 failed to job cancelled due to short dump :MESSAGE_TYPE_UNKNOWN.
If i wnat to rerun the chain , shoud i make program 2 to be terminated ???
tell me how can i rerun the chain and also possible erros of failures of program1
Regards ,
Pavan
wht is there in Programs?
why it is failed. try to analyze it. they you can think about rerun the process chain.,
Nagesh Ganisetti.
Similar Messages
-
Process chain Failed!!! please help
Hi All
Process chain failed at activation of ODS process and the error message is
Cannot activate request 0000006602(REQU_3YG2WB3F2C48PDD4X4BOW5FYS) of DataStore object
Activation of M records from DataStore object RC2CTD01 terminated
Please Help!!!
ThanksI've checked in the monitor screen it's giving me the below error under status tab
Request still running
Diagnosis
No errors found. The current process has probably not finished yet.
System Response
The ALE inbox of BI is identical to the ALE outbox of the source system
or
the maximum wait time for this request has not yet been exceeded
or
the background job has not yet finished in the source system.
Current status
All of the packets from the source system arrived
I've repeated the process and it is asking for seconds...so how much should i give in the second field....
Please help!!! -
Sending mail to GROUP ID when a process chain fails.
Hi All,
Can one suggest me, how to send a failure/success mail to a Group mial id when a process chain fails.
I am awere about sending mails to individual mail id's when a any process fails or succed. I want to know the group ID creation part & how to tag the same SOCT.
Thanks in advance.
BR,
Kiron.hi,
The Distribution List/Group_id is created in SO23 transaction.
hope it is helpful to u
thanks -
If Process Chain Fail in Production?
Hi to all,
Please can anyone tell me, if there is process chain running in production and any process type fail or process chain fail ?.
Does we need to repair it, or repeat it or, restart it.
How to identify what should be done and how to do it.
I shall be thankful to you for this.
Regards
Pavneet RanaHi
Based on the error occur in process chain step, we have to monitor the error.
If the error or red color occur when you schdule and check the log view, then right click the error process step and select display messages, check the error clearly by using process monitor.
based on the error you have to react.
this links will helpful to you.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/502b2998-1017-2d10-1c8a-a57a35d52bc8?QuickLink=index&overridelayout=true
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00a1f389-ec7c-2c10-04bc-9d81b3084171?QuickLink=index&overridelayout=true
Edited by: Srikanth.T on Jan 23, 2012 11:29 AM -
What will u do if process chain fails?
Hi gurus
What will u do if process chain fails?
Thank in advance?
RajuHi rajaiah
Firstly if a process chain fails, identify the process that has failed and on the context menu of the failed process you will get an option called display message where you can find the exact reason for the failure. A process chain can fail in many cases. So first try to find the error occured . For example if a process chain has failed due to invalid records then we have to edit the psa and reload the data from psa to data target (reconstruction). Based on the error message you need to take the necessary actions...
Hope this may help you.. please assign points if found helpful.
Regards,
Harish. -
Process Chain failed at Delete PSA event level
HI Every one,
I am monitoring process chains, which are running on daily basis.
I have one <b>Delete PSA</b> process chain, this chain contains only two events
1. Start Event 2. Delete from PSA.
Process chain failed at<i> Deleted from PSA</i> event level.
Below is the error message I got from the process chain screen.
"Data inconsistency in /bic/b0000231000 table,partition was not deleted"
"Delete request REQU_4353ACARKJNY70Z5F11 from PSA 8ZMMOM...."
Please help me by giving possible reasons for this error message and solution for this problem.
Thanks in advance.
Regards,
Narayana K.hi,
Are you deleting the PSA requests using abap program?
Regards,
Vijay -
Using Alert Framework to send email notifications when Process Chain fails
Hi Everyone,
I've configured ALRTCATDEF in Solution Manager, selected the alerting option for Process Chains in - RSPC > Attributes > Alerting, but it looks like whenever any process chain fails, an email notification will be sent to the same recipients.
Is there anyway to have an ALRCATDEF - alert category for different process chains, so that different recipients receive notifications for different Process Chains.
Thanks,
KenInteresting....I was actually hoping for different recipients for different process chains.
E.g. for our
CRM process chain - Support Team 1
FI process chain - Support Team 2
and so on and so on.
I think the only way may be creating a custom process type and implementing a class for this process type that calls function SALRT_CREATE_API. Then adding this process type to the process chain, with a different variant for each.
However if anyone knows a way to do this in a SAP standard way using the Alert Framework, that would be great.
Cheers,
Ken -
'AND' process in a process chain failure - need help
For the first time and out of no where, two separate 'AND' processes in two separate process chains failed on two separate days. It displayed error the same messages in both isntances as below. It seems that when the first load completed and the second was still in progress, this 'AND' attempted excecute and failed.
I had to manually resume the chain by setting the 'AND' status'to 'G' in RSPCPROCESSLOG table. I also plan to recreate those 'AND'.
But did anyone here experience this problem and know the root cause?
Thanks for any assistance!
Julian
This AND process is not waiting for event RSPROCESS, parameter
Job cancelled after system exception ERROR_MESSAGEThanks, Shambhu!
I am planning to create new ones. But my problem is that I hate to recreate all 'AND's I have in all our chains. There are a lot of them. But if I don't, I have no idea which is the next victim ...
Julian -
Send sms when bi process chain failed
Hi SAP Gurus,
Is some one inform me how is it possible to send an SMS when a process chain failed ?
Is there a possibility to paramter something on the SAP BI system to execute this action ?
ThanksHi,
I dont think there is an SMS option . But an email can be send when a Process chain gets failed. The detail step for this is
1. go to ALRTCATDEF
2. select classification "Process Chains"
3. click on display/change
4. double-click on "error in a process of a process chain"
5. click on "fixed recipients"
6. write in your username (you have to maintain your e-mail address in SU01 for that to work)
7. save
8. In RSPC, take the required process chain
9. go into edit mode
10. from the menu, select Process chain -> attributes -> alerting
11. check "send alerts if errors occur"
Regards
Lekshmi -
Process chain failed at COLLAPSE PROCESS TYPE ?
HI all ,
we have one process chain , in that we have used oe process type collapse for the cube .
it got failed , but in the manage screen , under request status , it is showing tick mark i.e collapse successfully .
give me some solution..
regards ,
Srinivas .Hi Venkatesh,
thank you, i have resolved this issue.
i have checked in SM12 and there is no lock on the particular info cube then i repeated the process.
the process chain failed at the stage of rolling up infocubes and the next triggred process was successfull even though i repeated the process chain.
my concern is how the next process triggrred and it was successful when rollup process failed.
can you please explain me
thanks -
Process chain failed at AND process type ?
hi all .
Process chain failed at AND process type ?
and it is giving message Job cancelled after system exception ERROR_MESSAGE .
what is the reason & solution .
regards ,
srinivas ,Hi,
That depends on the system behaviour... There is no issue in that... You can repeate the process.. If there is no repeat option available then you can on the detail view.. there is a chance that you will get a repeat option there.. If not then copy the chain.. remove the loaded process and add one starter chain an continue the chain in immediate mode...
Regards
Sajid khan -
Process chain failed on creating Indexes
Hello All,
Since a few days our process chains have failed because of an impossibility to create Indexes.
Job BI_PROCESS_INDEX can run for 3 days without any result. Usually it runs during 4 seconds.
When we stop this job, the next day the process chain fails to delete indexes.
If we run RSRV for our infocube we get the following error :
ORACLE: The status of index /BI0/E0PA_C01~040 is INVALID
Our DBA says it's a BW issue.
Any idea to solve this issue ?
Thanks &
Regards
CatherineIf we run RSRV for our infocube we get the following error :
ORACLE: The status of index /BI0/E0PA_C01~040 is INVALID
I hope u followed the below to check cube.
RSRV -> Tests in Transaction RSRV -> All Elementary Tests -> Database -> Database Statistics for an InfoCube and its Aggregates
In that case, did u execute "Correct Error" (button in toolbar) to fix that error ?
If that does not fix the issue,
cannot u delete (button in toolbar) and reschedule Process chain (delete index -> DTP load to Cube -> create index) to create index ?? -
Process chain failed during DTP
operation generate could not be carried out for the request no ...
My process chain failed while DTP . Then i right clicked on it and clicked on display messages then the error is
operation generate could not be carried out for the request while DTP in process chain
Please give me the solutionhi,
chk if the DTP performs load with info spoke.
if so chk the source and destination defintion of the infospoke definition.
Ramesh -
One of the APD Process Chains fails.
Hi All,
I have created two different process chain (PC1 and PC2 for example)which use program RSAN_PROCESS_EXECUTE to execute the two diiferent APD (APD1 and APD2 for example) . PC1/PC2 executes APD1/APD2 respectively.Both the process chain have the same trigger event.
The issues is that only one of the process runs successfully and the other fails at the program RSAN_PROCESS_EXECUTE
For example if the PC1 runs PC2 fails at the program RSAN_PROCESS_EXECUTE and vice versa.
The Error message it displays is
1) Job started S 00 516
2) Step 001 started (program RSPROCESS, variant &0000000155350, user ID ALEREMOTE) S 00 550
3) Spool request (number 0000030567) created without immediate output S SY 355
4) Processing completed with errors. See spool list E RSAN_PR 22
5) Job cancelled after system exception ERROR_MESSAGE A 00 564
Thanks
Rajivhi,
To check the detailed error message for failure of APD, check in RSANWB, goto that APD and click on monitor.
You will find the spool over there.
Check the error message and let us know, so that we can try to help you out.
It can be due to authorization issue or due to low memory.
Regards
Lavanya -
Process chain failing while executing DTP
Hi All,
My process chain is failing while executing DTP.
Error i got is: OBJECTS_OBJREF_NOT_ASSIGNED
Access not possible using 'NULL' object reference.
The dump is occuring in method : GET_FIELD_LIST_INBOUND
TRY.
CALL METHOD cl_rstran_model=>factory
EXPORTING
i_tranid = i_tranid
RECEIVING
r_r_model = l_r_model.
CATCH cx_rstran_exception.
RAISE EXCEPTION TYPE cx_rs_step_failed
ENDTRY.
From SDN , i am quite sure that its a SAP problem and needs to apply some Note.
Could anyone please tell me, which note i should apply ?
Thanks.Hi,
check the note note 1081884 it may help you ..
check link ..
/message/2817339#2817339 [original link is broken]
Reagrds,
Shikha
Edited by: Shikha Goel on Oct 10, 2008 6:21 AM
Maybe you are looking for
-
SSO is not working - User is missing credentials for connecting to alias
Dear Experts, I am facing a strange problem in SSO with reference system user mapping. I have configured reference system user mapping for accessing R/3 for ESS/MSS and transactional iviews along with UWL. The SSO was configured 2 months ago and wa
-
I cannot activate FaceTime on my iMac desktop or on my iPad. I changed the password for my Apple ID, but still get the same result 'Could not sign in. Please chgeck your network connection and try again' There is nothing wrong with my connection - i
-
VMM Shared ISO error "User account does not have permission required to open attachment"
I had this error once because the local service account was selected during installation of VMM. I have reinstalled VMM with a Domain service account and the error went away. However, the error is back. "User account does not have permission requ
-
Any way to put alot of addresses in one contact for a group e-mail?
Any way to put alot of addresses in one group contact to send to many people at once. Want to be able to click one contact name, say "Club Members" and the e-mail go to all of them at once. Thanks, Sam
-
Revision: 3092 Author: [email protected] Date: 2008-09-04 08:07:33 -0700 (Thu, 04 Sep 2008) Log Message: Removing 'RemoveItems' since it's currently not leveraged by States code-gen and nobody is using it as an override in other contexts. QA: No Modi