Process chain failed with Error-Status Change of Process ABAP ZL321NIMIMUUT

Hi,
process chain got failed with Error --**Status Change of Process ABAP ZL321NIMIMUUT
Save Status and Trigger Events if Appropriate**

Hi Neha,
When we do the repeat after right click then we are getting this messege"--**Status Change of Process ABAP ZL321NIMIMUUT
Save Status and Trigger Events if Appropriate**"
I have come to know that there is one ABAP programe when we go to manage varient.
ABAP Programme"ZBWR_ZMYYNNINOH_CSV_CHANGE"

Similar Messages

Process chain failing with error 8 in BI 7.0

Hi ,
we have upgrade the dev to BI 7.0 and I am trying to execute the process chains but it is failing with a error 8 due to the step of the job BI_PROCESS is in the name of a old user. So i have changed in process chain -Attrbutes--Execution user --- current user.So the chain has started but it has so many chains inside the Meta chain it looks i need to go to each of them and change as cyurrent user.
But is there some place where I can change globally to a Batch user/current user for these process chain in BI 7.0.If so pl let me know.

Hi,
user SM37 to identify all BI_PROCESS jobs and change the User of the step in the jobs (they all should only have one step).
bye
Frank

Attribute Change Run in Process Chain failed with SQL 942 error

Hi,
Attribute change run in th eprocess chain failed with the message " SQL Error 942" and ran succesfully after repeating the step.Searched in Forums for similar error but the solutions were not apt.
Any pointers would be of great help!!
Thanks in advance,
Bhagyarekha.

Hi Bhagyarekha,
The reason behind that error could be:
An attempt is made to activate a characteristic whose compounding was replaced and whose navigation attributes were simultaneously deleted. The replacement of the compounding temporarily deletes the M view of the characteristic during internal activation. The process of deleting navigation attributes involves converting the attribute SID tables. However, the M-view of the characteristic, which has just been deleted, is needed for this conversion.
Check this SAP Note:
Note 684405 - Replacing the compounding and deleting navigation attr.
Hope it helps.
Veerendra.

Process Chain Ended with Errors - cause unknown

I have had several instances of process chains stopping for no apparent reason. The stops occur between 2 master data infopackage loads. The last step is green and the next is grey. The PSA table has been updated successfully for the last step. All IDocs are in green status in both systems. The monitor for the last successful step does say "Ended with Errors" although no errors are evident. The process chain starts back up via Repeat at the next (grey) step and continues successfully. There were no system problems or connection interruptions that occurred during the time the process chains failed. There were no changes in the remote user profile.
This exact problem has occurred a half dozen times since our application of ECC Support Packs several months ago and had not occurred before. The infopackages are different each time. Two different process chains have had this problem. I have re-activated and re-scheduled the process chains without solving the problem.
Thanks for any ideas on why this may be occurring or what I can do to prevent it.
Patty Moffatt

Hi Des,
Here's my BW release info:
SAP_ABA        640       0019 SAPKA64019     Cross-Application
SAP_BASIS      640       0019 SAPKB64019     SAP Basis
PI_BASIS       2005_1_6400009 SAPKIPYJ69     Basis Plug-In
ST-PI          2005_1_6400008 SAPKITLQH8     SAP Solution Tools Plug-
SAP_BW         350       0019 SAPKW35019   SAP_BW
ECC SPs 13-21 were applied before the BW problem started:
SAP_BASIS      640       0021 SAPKB64021
SAP_ABA        640       0021 SAPKA64021
PI_BASIS       2005_1_6400012 SAPKIPYJ6C
ST-PI          2005_1_6400008 SAPKITLQH8
SAP_BW         350       0021 SAPKW35021
PI             2004_1_5000016 SAPKIPZI6G
The process chain step and the monitor load both are green. The Details tab shows all the processing is green, but the Process Chain itself is red with "Errors Occurred. There have been no runtime dumps.
Patty

Process chain failed -- No error

Hi ,
I have a PC showing failed status in a local chain . But every thing is Okie in that local chain
After coming outof local chain , next process is Attribute chain .
How to manually do it ?/ or repeat it . no repeat option is available too.
My team suggest me to start this local chain again and not to do Attribute chain run manually. why so?/ please help me .
Any error handling docs on process chains is highly appreciated.
my id is [email protected]
Regards,
Pavan

Hi Pavan,
You need to fix the error first. i.e. execute Attribute change run manually.
After successful completion, go to the process chain and right click on the next step ( next to attribute change run ) it will give the 'repeat' option.
Hope it helps.
Regards,
Aditya

Process chain failed with RSDMD199

Hi All,
While loading data through process chain, which includes master data and transactional data,
the job failed.
and the message is : RSDMD199
also when i checked in details tab in RSMO, i got meaasage like:
3510 data records in table /BIC/PZORD_NUM marked for deletion
also this job runs with 3 data packages, out of which 1st data package failed while updating in target.
But completed data package also has the same message like
3510 data records in table /BIC/PZORD_NUM marked for deletion
So can anybody explain me which type of error this is.......???
Thanks in advance,
Vishal

hi,
see Note 788588 which addresses the RSDMD199 error.
So shortly summarizing the problem of RSDMD 199.This error occurs due
to following reasons:
1. Master Data tables or indexes are inconsistent at the database level.
2. Master Data is inconsistent for the characteristic (RSRV check)
3. Same characteristic value spread across different datapackages and
they are loaded in parallel.
4. Parallel loading of time-dependent attributes or texts.
5. Delta update of an ODS object into a characteristic
6. Simultaneous data load into the following objects :
    a. Navigational Attributes of the characteristic
    b. Compounding Objects of the characteristic.
    c. Characteristics that are references of this one.
    d. Trasaction Data - Into Info Cubes that contain this
       characteristics
    e. ODS request activations - When the chacteristic is part of the
    ODS object.
Some of the above points are described in detail in the note 668466.
Colin

NI-Visa Runtime 5.4.0 Fails with error status 1603.

I'm trying to install the NI-Visa runtime 5.4.0 in a Windows 7 embeded PC after some investigation I can see in the windows log the error status after the installation it's 1603.
What it's the meaning of this error? did anyone succeed in install the foftware in a similar platform?
Thanks and best regards.

I ran the verbose log for the NI install file, in this case:
...\NI-VISA Runtime\setup.exe /acceptlicenses "yes" /log c:\InstallVISA.log , looking for "Return Value 3", like indicated here, show this:
DIFXAPP: ENTER: ProcessDriverPackages()
DIFXAPP: ERROR -The operating system you are running on isnot supported.OnlyWindows2000,Windows XP,WindowsServer2003andWindows codenamed Longhorn are supported.
CustomActionMsiProcessDrivers returned actual error code 1603(note this may not be 100% accurate if translation happened inside sandbox)
MSI (s)(D0:E0)[12:31:25:671]:Machine policy value 'DisableRollback'is 0
MSI (s)(D0:E0)[12:31:25:671]:Note:1:14022: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3:2
Action ended 12:31:25:MsiProcessDrivers.Return value 3.
Note that this installer works on another WES7 machine...

Process chains get an error when run analysis process

When my PRD system‘s process chains run analysisi process, I gets below error message:
Error occurred when starting the parser: Error when opening an RFC connection (FUNCTION: 'R
Message no. BRAINOLAPAPI011
Diagnosis
Failed to start the MDX parser.
System Response
Error when opening an RFC connection (FUNCTION: 'R
Procedure
Check the Sys Log in Transaction SM21 and test the TCP-IP connection MDX_PARSER in Transaction SM59.
It's OK when i test the TCP-IP connection MDX_PARSER in Transaction SM59.
The Sys Log in Transaction SM21(error part):
M Wed Mar 19 09:22:50 2014
M *** ERROR => ThPOpen: ExecPopen("/usr/sap/BWP/DVEBMGS00/exe/tp" bwprd sapgw00 18933904 IDX=35, r, ..) returned -14 [thxxexec.c
M {root-id=532810645F5D12A0E1008000C0A8642F}_{conn-id=5328109B5F5D12A0E1008000C0A8642F}_5
A RFC 1878 CONVID 18933904
A   * CMRC=0 DATA=0 STATUS=0 SAPRC=0 RfcExecProgramKernel RfcRaiseErrorMessage cmd could not be started by OS (rc = 1)
A RFC> ABAP Programm: SAPLSTPA (Transaction: )
A RFC> User: JY-LKZ (Client: 900)
A RFC> Destination: CALLTP_AIX (handle: 8, DtConId: 530F4E5C30AF4550E1008000C0A8642E, DtConCnt: 0, ConvId: ,)
A RFC SERVER> RFC Server Session (handle: 1, 68443927, {5328109B-5F5D-12A0-E100-8000C0A8642F})
A RFC SERVER> Caller host:
A RFC SERVER> Caller transaction code: STMS (Caller Program: SAPLTMSC)
A RFC SERVER> Called function module: TMS_CI_START_SERVICE
A *** ERROR => RFC Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1887
FUNCTION: 'RfcExecProgramKernel'
RfcRaiseErrorMessage cmd could not be started by OS (rc = 1)
PROG ="/usr/sap/BWP/DVEBMGS00/exe/tp" bwprd sapgw00 18933904 IDX=35
[abrfcio.c    9213]
A {root-id=532810645F5D12A0E1008000C0A8642F}_{conn-id=5328109B5F5D12A0E1008000C0A8642F}_5
A TH VERBOSE LEVEL FULL
A ** RABAX: end RX_GET_MESSAGE
M
M Wed Mar 19 09:23:15 2014
M *** ERROR => ThPOpen: ExecPopen("/usr/sap/BWP/DVEBMGS00/exe/tp" bwprd sapgw00 18968493 IDX=61, r, ..) returned -14 [thxxexec.c
M {root-id=532810645F5D12A0E1008000C0A8642F}_{conn-id=532811958F750F10E1008000C0A8642F}_1
A RFC 1878 CONVID 18968493
A   * CMRC=0 DATA=0 STATUS=0 SAPRC=0 RfcExecProgramKernel RfcRaiseErrorMessage cmd could not be started by OS (rc = 1)
A RFC> ABAP Programm: SAPLSTPA (Transaction: )
A RFC> User: TMSADM (Client: 000)
A RFC> Destination: CALLTP_AIX (handle: 3, DtConId: 530F4E7830AF4550E1008000C0A8642E, DtConCnt: 0, ConvId: ,)
A RFC SERVER> RFC Server Session (handle: 1, 70212851, {53281195-8F75-0F10-E100-8000C0A8642F})
A RFC SERVER> Caller host:
A RFC SERVER> Caller transaction code: STMS (Caller Program: SAPLTMSC)
A RFC SERVER> Called function module: TMS_CI_START_SERVICE
A *** ERROR => RFC Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1887
FUNCTION: 'RfcExecProgramKernel'
RfcRaiseErrorMessage cmd could not be started by OS (rc = 1)
PROG ="/usr/sap/BWP/DVEBMGS00/exe/tp" bwprd sapgw00 18968493 IDX=61
[abrfcio.c    9213]
A {root-id=532810645F5D12A0E1008000C0A8642F}_{conn-id=532811958F750F10E1008000C0A8642F}_1
A TH VERBOSE LEVEL FULL
A ** RABAX: end RX_GET_MESSAGE.
ps.
1、IT's everything ok in the development system.
2、It’s ok when i repeat this analysis process .
3、It’s ok when i run this analysis process in analysis process designer.
4、Attachment is the sys log in sm21.
Thanks everyone.

Hi Vignesh.B,
Yes,it's not user's problem . But i don't think it APD's problem .Cause all APD has the same problem and .
Below is one of APD souce and target :
Hope this information is useful .
Regards,
Lian

Relaunch process chain failed. Error 8

Hi experts,
My problem deals with chain of load.
The chain was launched by user ALEREMOTE.
After a loading process failed it become red. Then I attempted to repeat o repair the process failed and the answers was:
JOB_PROCESS_LOADING could not be scheduled. Return code 8.
So, I couldn't relaunch the chain from the process failed.
Please, could anyone help me.
Thank you very much in advance.
Jorge

HI,
This is due to lack of authorisations in the production box.Try to repeat it once again and again it will give the same pop up
go to su53 transaction code there you can see the authorisation faliure send the screen shot to the basis or authorisations team to add it to your role.
After adding just logoff from sap and then try tologin and repeaat the job this will work.
Regards,
Vikram

Some times Child Job with error status

Hi,
We are running some standard report periodically, this report is generationg some child jobs.
Problems is that these child jobs, somtimes are failed with error status.
This is happening very few times,may be 2 or thrice a month.
There's no explanation on this.
I am running with 4.6c version and my Basis is 620.
Can you please add some valuable suggestion for this.
Thanks,
Anmol.

What is your question? How to stop the spawned job or how to stop the errors? What program? What is the error or the condition that triggers the error? You have to give more information and be clear about the desired result...

Error: on clicking Registry menu item in ESM Management Portal. The request failed with HTTP status 404: Not Found.

Hi,
I have installed ESB Management Portal successfully after following all the steps. everything is working fine except when I click the Registry menu in the portal. I get an unhandled exception. The event viewer shows the below error "The request failed
with HTTP status 404: Not Found."
================================================
Event code: 3005
Event message: An unhandled exception has occurred.
Event time: 1/27/2015 5:56:10 PM
Event time (UTC): 1/27/2015 5:56:10 PM
Event ID: f7aedd39118845b79c17d3442a0d15a7
Event sequence: 54
Event occurrence: 1
Event detail code: 0
Application information:
Application domain: /LM/W3SVC/1/ROOT/ESB.Portal-1-130668549484455107
Trust level: Full
Application Virtual Path: /ESB.Portal
Application Path: C:\Projects\Microsoft.Practices.ESB\Source\Samples\Management Portal\ESB.Portal\
Machine name: <Machine Name>
Process information:
Process ID: 4712
Process name: w3wp.exe
Account name: NT AUTHORITY\NETWORK SERVICE
Exception information:
Exception type: TargetInvocationException
Exception message: Exception has been thrown by the target of an invocation.
at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at System.Web.UI.WebControls.ObjectDataSourceView.InvokeMethod(ObjectDataSourceMethod method, Boolean disposeInstance, Object& instance)
at System.Web.UI.WebControls.ObjectDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments)
at System.Web.UI.DataSourceView.Select(DataSourceSelectArguments arguments, DataSourceViewSelectCallback callback)
at System.Web.UI.WebControls.DataBoundControl.PerformSelect()
at System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound()
at System.Web.UI.WebControls.CompositeDataBoundControl.CreateChildControls()
at System.Web.UI.Control.EnsureChildControls()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
The request failed with HTTP status 404: Not Found.
at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.Practices.ESB.Portal.UDDIService.UDDIService.GetCategoryByName(String UDDIServerUrl, String tModelName) in c:\Projects\Microsoft.Practices.ESB\Source\Samples\Management Portal\ESB.Portal\Web References\UDDIService\Reference.cs:line
575
at Microsoft.Practices.ESB.Portal.Uddi.ServiceProxy.getBTEndpoints(String applicationName, Boolean getSendPorts, Boolean getRcvLocations) in c:\Projects\Microsoft.Practices.ESB\Source\Samples\Management Portal\ESB.Portal\Uddi\ServiceProxy.cs:line
553
at Microsoft.Practices.ESB.Portal.Uddi.ServiceProxy.GetEndpointsByApplication(String applicationName, Boolean getSendPorts, Boolean getRcvLocations) in c:\Projects\Microsoft.Practices.ESB\Source\Samples\Management Portal\ESB.Portal\Uddi\ServiceProxy.cs:line
46
Request information:
Request URL: http://localhost/ESB.Portal/uddi/uddi.aspx
Request path: /ESB.Portal/uddi/uddi.aspx
User host address: ::1
User: <domain>\<user>
Is authenticated: True
Authentication Type: Negotiate
Thread account name: NT AUTHORITY\NETWORK SERVICE
Thread information:
Thread ID: 19
Thread account name: NT AUTHORITY\NETWORK SERVICE
Is impersonating: False
Stack trace: at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at System.Web.UI.WebControls.ObjectDataSourceView.InvokeMethod(ObjectDataSourceMethod method, Boolean disposeInstance, Object& instance)
at System.Web.UI.WebControls.ObjectDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments)
at System.Web.UI.DataSourceView.Select(DataSourceSelectArguments arguments, DataSourceViewSelectCallback callback)
at System.Web.UI.WebControls.DataBoundControl.PerformSelect()
at System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound()
at System.Web.UI.WebControls.CompositeDataBoundControl.CreateChildControls()
at System.Web.UI.Control.EnsureChildControls()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Custom event details:
=================================
Any idea why this is happening and what needs to be done ?
PLEASE HELP
Thanks & Regards
Vikram

Snippet from the link below:
If you get a “404: Not Found” error, it ‘s because by default there is no script map for .svc file with default IIS 7.0 installation, so you need to register .svc extension in IIS:
You need to update IIS script maps to register .svc extension In a command prompt (ran as administrator), execute the following command:
“%windir%\Microsoft.NET\Framework\v3.0\Windows Communication Foundation\ServiceModelReg.exe” -r -y"
Refer:
https://dgoins.wordpress.com/2010/05/01/esb-toolkit-management-portal-installation-notes-from-the-field-2/
Sarvanan's blog around this with detailed explanation:
Configuring Exception Management Portal
As mentioned above also
Check Portal Configuration Settings
Rachit
Please mark as answer or vote as helpful if my reply does

The request failed with HTTP status 401: Unauthorized error message

Hi
While processing security (OLS v4.3 SQL2000), we encounter the following problem towards the end of the process:
Creating Desktop folders
Completed
Error occurred
CreateJournalReport: The request failed with HTTP status 401: Unauthorized., FindAppsetFolder Failed
We have checked the IIS as recommended in some previous threads but we still have the same error message each time we process security.
Does anyone have any other ideas what the problem could be?
Many thanks

Hi,
There are several SAP notes speaking about this subject. For example, check if SAP note numbers 1103004 or 1104690 can help you.
Kind Regards,
Patrick

Error "The request failed with HTTP status 401: Unauthorized"

Dear All,
While running ssrs report using reportviewer I am getting following error as "The request failed with HTTP status 401: Unauthorized". I have also added required entry in registry and rebooted the server. But same issue appears. So, please help
me to resolve this.
Thanks in advance

Hi dsddsadsa,
According to your description, when trying to running report from the report viewer control, the error "The request failed with HTTP status 401: Unauthorized" is thrown out.
While running report viewer control without impersonation setting, by default it will use the process identity which is Network Service (the AppPool identity is Network Service). Depending on the identity of the AppPool the app is running under, the identity
might be rejected. In your scenario, you may haven’t enable ASP.NET impersonation, you will get this exception. Please set up the following impersonation in the Web.config file, so that ASP.NET will use the configured user name and password to access the report
server:
<configuration>
<system.web>
<identity impersonate="true"
userName="domain\user"
password="password" />
Reference:
Request failed with HTTP status 401: Unauthorized (ReportViewer
control)
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu

SSIS fails with error : The process exit code was -1073741701

Hello All,
I am having issues with SSIS packages running from SQL agent job.
The server we are running the job is used for SSIS and there are lot of other SSIS jobs that are running.
We were able to run the job once successfully and the later runs are failing with the below error.(nothing has been changed)
The step did not generate any output. The return value was unknown. The process exit code was -1073741701. The step failed.
Nothing is being logged in the [catalog].[operations] or operation_messages view. When tuned the profiler ON we do not see the job trying to connect to SSISDB at all. I am assuming that the job is failing much before if does any thing.
I have moved the package to a different server and ran it with the same proxy account and it works fine there.
Any help or suggestion on this issue would be helpful.
Thanks !

Hi SQL_Help,
You can run the job once successfully and the later runs are failing with the below error ran it as a Job. “The step did not generate any output. The return value was unknown. The process exit code was -1073741701. The step failed.” It
was really a generic error message with no information with it.
We can use Process Monitor and Event Viewer to capture the detail error message. Then based on the error message to fix this issue. The following similar issue is for your reference:
http://blogs.msdn.com/b/dataaccesstechnologies/archive/2014/05/22/ssis-package-fails-with-error-the-step-did-not-generate-any-output-the-return-value-was-unknown.aspx
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Attribute change run process type failed with short dump

Hi all,
In the process chain Attribute change run process type failed with short dump. I checked the locks in SM12 but there are no locks associated. I checked in the attribute change run screen through RSA1 -> infoobject list but there are no infoobjects there. I think the ACR was completed successfully, still the process type in the PC was in red colour. What to do and let me know what happened here.
Thanks,
Jack

1. This kind of scenario is extremely rare but it happens sometimes. It might be the case that 2 attribute change runs are running at the same time.
2. Same IO is being used in Differnet PC and getting activated.
I think if this frequently occurs you need to check at the time of locking all running jobs and see whether anywhere else or simultaneously 2 ACR are running.
Please do close the thread if that answers your questions. Please help us keep the forums clean and open useful information only.
For more information search on help.sap.com and you will get lots of material.
Regards.
Den

Process chain failed with Error-Status Change of Process ABAP ZL321NIMIMUUT

Similar Messages

Maybe you are looking for