Process chain failing on particular day
Hi Experts,
I am new to BW.I have an issue with one of the daily running process chain.
It is a time based daily running process chain and usually completes in 10mins.It is running fine from monday to saturday but on every sunday this chain is getting failed at one of the Infopackage.
And this infopackage is loading to the data target, which is a standard cube 0TCT_C01 and no other infopackge is loading to this target when this chain runs.So no conflicting issue araises.
Upon analysis, this infopackage is getting failed with short dump issue on every sunday.On checking the dumps in T-code : ST22 , it shows the error " DBIF_RSQL_SQL_ERROR".
Could anyone please suggest me, what all other things I need to check, to find and analyse the exact root cause of the failure on every sundays?
Appreaciate the for your quick responses.
Hello Cris,
Normally the Error DBIF_RSQL_RSQL_Error corresponds to the tablle deadlock related Error.
It includes various reason like
1. Some process is using the table and your process tried to intervene
2. Duplication of data in table where not allowed. etc etc
Please closely observe the Dump, you will get the particular reason for that Error definitely.
or please copy paste dump here we can analyze.
Hope this helps !
Regards
YN
Similar Messages
-
Process chain failing past 3 days
Hi,
Process chain is failing since 3 days which suppose run 6 PM everyday, If i run manually it is working fine, again it is failing at schedule time 6 PM.
In Canceled job log giving the following information. NO_MORE_SPACE: can not crate MTE: No more space: no more MESSAGE_CONTAINER slots available.Process chain variant XXXX not having scheduled variant for the event RSPROCSS.
Please advice me to over come this issue.
Regards,
B JHI JB,
Check in DB02 is there enough space available or not?
Contact your basis people if space related issue means.
NOTE: Assign points if it helps
Regards,
Arun.M.D -
Process chain on a particular day and multiple times
i have a requirement to run a process chain 2 times on saturday (one at 3pm and another at 8 pm) for a particular process chain only !!
how do i do this ?? some one please help....Here's one idea:
Create an ABAP program that calls the RSPC_API_CHAIN_START Function Module. In this program, create a selection screen that has the same selection criteria as this Function Module. When you have tested the program and ensures that it works properly, create a variant for that program, for the selection selection screen criteria, and save that. After you have transported the program and variant throughout your landscape, schedule two separate jobs in tcode SM36 of your production environment. One as a weekly periodic job that is scheduled to start on a Saturday @ 3:00 PM and another weekly periodic job that is scheduled to start on a Saturday @ 8:00 PM. -
Process Chain Failed for Perticular day, want to take load from R/3 for day
Hi Experts,
While monitoring the process chain i found that on 16 Nov2010 the schedule got failed then i checked but that was due to rfc connection to R/3 failed then again i repeated the process in RSPCM. But toady in the morning when i was checking i found that for 17 nov scheduled got run successful but when i drilled down on date for 16th data but it was failed for 16. Now please guid me how to bring the data for 16nov from R/3. My process chain contains both Master Data/ Transaction Data and Deltas / Full loads ???Hi,
As you have mentioned in your post, the process chain for 17th has finished successfully, can you confirm if all the dataload also finished successfully?
If the dataload also has finished successfully, then ther is not much to be done from your side. Pplease note below points
1. For Delta Loads- No need to worry about them. For standard datasources, the system would have automatically fetched all the deltas since your last successful delta load. For generic datasources as well, based on previous delta pointer in RSA7, all the delta records would have got fetched.
2. For full dataloads- Check the selection criteria in your infopackages. If its based on date, then you would have to do dataload again.
The selection criteria for this dataloads should include the dates for 16th & 17th dataload. Everything else should be fine.
Else, if your dataload did not finish succesfully on17th, though the process chain has finished. You need to do below
1. For all the delta loads- Carry out Repeat Delta loads. This would fetch all the deltas missed. After this load, all the deltas would continue to come normally.
2. For full loads, perform same as mentioned in point 2 above. -
Run process chain on last three days of the month
Hello
I need to run process chain on last three days of the month. For example , It should run on 28, 29 and 30th dates of June.
There is no option to put a code in the start process of the process chain.
I can run it every day and put a code in the infopackage/DTP so that empty load (0 records) will be done on other days.
This doesnt sound as a good option.
Do u know any other options?Hi
See the code and details how to do it, and change the code as per your requirement.
http://wiki.sdn.sap.com/wiki/display/profile/Surendra+Reddy
Triggering the Process Chains at Particular Date using Events
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/s-u/triggering%20%20the%20process%20chains%20at%20particular%20date%20using%20events.pdf
BI-ABAP (Trigger Process Chains on evry month 3rd and 4th day).
https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=81428842
Thanks
Reddy -
Process chain failed at COLLAPSE PROCESS TYPE ?
HI all ,
we have one process chain , in that we have used oe process type collapse for the cube .
it got failed , but in the manage screen , under request status , it is showing tick mark i.e collapse successfully .
give me some solution..
regards ,
Srinivas .Hi Venkatesh,
thank you, i have resolved this issue.
i have checked in SM12 and there is no lock on the particular info cube then i repeated the process.
the process chain failed at the stage of rolling up infocubes and the next triggred process was successfull even though i repeated the process chain.
my concern is how the next process triggrred and it was successful when rollup process failed.
can you please explain me
thanks -
Process chain failed on creating Indexes
Hello All,
Since a few days our process chains have failed because of an impossibility to create Indexes.
Job BI_PROCESS_INDEX can run for 3 days without any result. Usually it runs during 4 seconds.
When we stop this job, the next day the process chain fails to delete indexes.
If we run RSRV for our infocube we get the following error :
ORACLE: The status of index /BI0/E0PA_C01~040 is INVALID
Our DBA says it's a BW issue.
Any idea to solve this issue ?
Thanks &
Regards
CatherineIf we run RSRV for our infocube we get the following error :
ORACLE: The status of index /BI0/E0PA_C01~040 is INVALID
I hope u followed the below to check cube.
RSRV -> Tests in Transaction RSRV -> All Elementary Tests -> Database -> Database Statistics for an InfoCube and its Aggregates
In that case, did u execute "Correct Error" (button in toolbar) to fix that error ?
If that does not fix the issue,
cannot u delete (button in toolbar) and reschedule Process chain (delete index -> DTP load to Cube -> create index) to create index ?? -
Using Alert Framework to send email notifications when Process Chain fails
Hi Everyone,
I've configured ALRTCATDEF in Solution Manager, selected the alerting option for Process Chains in - RSPC > Attributes > Alerting, but it looks like whenever any process chain fails, an email notification will be sent to the same recipients.
Is there anyway to have an ALRCATDEF - alert category for different process chains, so that different recipients receive notifications for different Process Chains.
Thanks,
KenInteresting....I was actually hoping for different recipients for different process chains.
E.g. for our
CRM process chain - Support Team 1
FI process chain - Support Team 2
and so on and so on.
I think the only way may be creating a custom process type and implementing a class for this process type that calls function SALRT_CREATE_API. Then adding this process type to the process chain, with a different variant for each.
However if anyone knows a way to do this in a SAP standard way using the Alert Framework, that would be great.
Cheers,
Ken -
Sending mail to GROUP ID when a process chain fails.
Hi All,
Can one suggest me, how to send a failure/success mail to a Group mial id when a process chain fails.
I am awere about sending mails to individual mail id's when a any process fails or succed. I want to know the group ID creation part & how to tag the same SOCT.
Thanks in advance.
BR,
Kiron.hi,
The Distribution List/Group_id is created in SO23 transaction.
hope it is helpful to u
thanks -
If Process Chain Fail in Production?
Hi to all,
Please can anyone tell me, if there is process chain running in production and any process type fail or process chain fail ?.
Does we need to repair it, or repeat it or, restart it.
How to identify what should be done and how to do it.
I shall be thankful to you for this.
Regards
Pavneet RanaHi
Based on the error occur in process chain step, we have to monitor the error.
If the error or red color occur when you schdule and check the log view, then right click the error process step and select display messages, check the error clearly by using process monitor.
based on the error you have to react.
this links will helpful to you.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/502b2998-1017-2d10-1c8a-a57a35d52bc8?QuickLink=index&overridelayout=true
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00a1f389-ec7c-2c10-04bc-9d81b3084171?QuickLink=index&overridelayout=true
Edited by: Srikanth.T on Jan 23, 2012 11:29 AM -
What will u do if process chain fails?
Hi gurus
What will u do if process chain fails?
Thank in advance?
RajuHi rajaiah
Firstly if a process chain fails, identify the process that has failed and on the context menu of the failed process you will get an option called display message where you can find the exact reason for the failure. A process chain can fail in many cases. So first try to find the error occured . For example if a process chain has failed due to invalid records then we have to edit the psa and reload the data from psa to data target (reconstruction). Based on the error message you need to take the necessary actions...
Hope this may help you.. please assign points if found helpful.
Regards,
Harish. -
Send sms when bi process chain failed
Hi SAP Gurus,
Is some one inform me how is it possible to send an SMS when a process chain failed ?
Is there a possibility to paramter something on the SAP BI system to execute this action ?
ThanksHi,
I dont think there is an SMS option . But an email can be send when a Process chain gets failed. The detail step for this is
1. go to ALRTCATDEF
2. select classification "Process Chains"
3. click on display/change
4. double-click on "error in a process of a process chain"
5. click on "fixed recipients"
6. write in your username (you have to maintain your e-mail address in SU01 for that to work)
7. save
8. In RSPC, take the required process chain
9. go into edit mode
10. from the menu, select Process chain -> attributes -> alerting
11. check "send alerts if errors occur"
Regards
Lekshmi -
Process chain failed at AND process type ?
hi all .
Process chain failed at AND process type ?
and it is giving message Job cancelled after system exception ERROR_MESSAGE .
what is the reason & solution .
regards ,
srinivas ,Hi,
That depends on the system behaviour... There is no issue in that... You can repeate the process.. If there is no repeat option available then you can on the detail view.. there is a chance that you will get a repeat option there.. If not then copy the chain.. remove the loaded process and add one starter chain an continue the chain in immediate mode...
Regards
Sajid khan -
Process chain Failed!!! please help
Hi All
Process chain failed at activation of ODS process and the error message is
Cannot activate request 0000006602(REQU_3YG2WB3F2C48PDD4X4BOW5FYS) of DataStore object
Activation of M records from DataStore object RC2CTD01 terminated
Please Help!!!
ThanksI've checked in the monitor screen it's giving me the below error under status tab
Request still running
Diagnosis
No errors found. The current process has probably not finished yet.
System Response
The ALE inbox of BI is identical to the ALE outbox of the source system
or
the maximum wait time for this request has not yet been exceeded
or
the background job has not yet finished in the source system.
Current status
All of the packets from the source system arrived
I've repeated the process and it is asking for seconds...so how much should i give in the second field....
Please help!!! -
Process chain failed during DTP
operation generate could not be carried out for the request no ...
My process chain failed while DTP . Then i right clicked on it and clicked on display messages then the error is
operation generate could not be carried out for the request while DTP in process chain
Please give me the solutionhi,
chk if the DTP performs load with info spoke.
if so chk the source and destination defintion of the infospoke definition.
Ramesh
Maybe you are looking for
-
Default value for first row in table after row has rendered
I have a master-detail type page where the first row in the detail table appears with no values when the page first renders. After the user enters some data in the master area, the default value is available. I then use something like this to set the
-
I am having trouble dropping items into my external hardrive
I have purchased a samsung external hard drive for putting all my photos etc on. I thought I could just drag and drop the items into it but it isn't working. What do I have to do to get started with it??
-
Can anyone tell me why RADIUS uses two UDP port while TACACS+ uses only one ?
I dont know the answer. Someone asked me in an interview.
-
Which ERP scenarios can be performed with overhead cost orders?...
Hello SAP-team! Which ERP scenarios can be performed with overhead cost orders? - Material cost estimates with BOM and task lists - Overhead cost collectors that post overhead costs to cost centers - Accrued costs in CO - Settlement to a G/L account
-
Hi everyone, I currently need to process about 400 txt files, equivalent to about 1TB of data in maximum 5-6 hours. I need to run a very simple scrip, where I would capture about 0.10% of the data. Something like a select function with some where cl