Process chain failure, Status F already registered to instance

Hello - Can anyone provide any insight into this problem with process chains? Our BI_PROCESS_TRIGGER jobs failed with the following message:
Status F was already registered to instance 4340NUNDUCTS0ZJX5FNH7C8J3 variant ZGRU_3HQGJS5UIU35Y4BIHZOLF73N1 in run 433XJ13KMDDOFOIE
Message no. RSPC120
Thanks!
Marge Blick
312-240-3918

Hi,
Please check the status of the job ata application server.
i feel there was a job in Hold status at sever level .
Please chekc that and cancel and load.
Apparao

Similar Messages

Help! about process chain execution status

hi:
we nearly have one problem about the process chain execution status,
when error occured during process chian execution, we fixed it in time,
however, even the error repaired, its status still showed yellow, and this
stop the subsequent process to excute.
Any body who can provide some help to solve this problem? thanks in advance
and looking forward to one reply.

Hi ,
Try this method
Open the messages of a failed step by right clicking on it and selecting 'display messages'.
In the opened popup click on the tab 'Chain'.
In a parallel session goto transaction se16 for table rspcprocesslog and display the entries with the following selections:
1. copy the variant from the popup to the variante of table rspcprocesslog
2. copy the instance from the popup to the instance of table rspcprocesslog
3. copy the start date from the popup to the batchdate of table rspcprocesslog
Press F8 to display the entries of table rspcprocesslog.
Now open another session and goto transaction se37. Enter RSPC_PROCESS_FINISH as the name of the function module and run the fm in test mode.
Now copy the entries of table rspcprocesslog to the input parameters of the function module like
described as follows:
1. rspcprocesslog-log_id -> i_logid
2. rspcprocesslog-type -> i_type
3. rspcprocesslog-variante -> i_variant
4. rspcprocesslog-instance -> i_instance
5. enter 'G' for parameter i_state (sets the status to green).
Now press F8 to run the fm.
Now the actual process will be set to green and the following process in the chain will be started and the chain can run to the end.
Regards,
Ravi

How to stop the process chain showing status as yellow but no process step

Dear Friends,
How to stop the process chain showing status as yellow but no process step is running in that process chain.
We have manually triggered the process chain for sales it finished successfully till load data but the next step is create index and DB statistics. Both of this steps are in unscheduled position only and no background job for this.
Please guide me.
Thanking you in advance.
Regards,
Shubhangi

Hi,
At times even I have faced this situation. During those times, running the Function module RSPC_PROCESS_FINISH by passing the right parameters came to my rescue.
Regards,
Raj

Process chain failures...

Hi Gurus,
Can someone please send me a link which has got some common process chain failure issues with the resolutions....
Thanks & Regards.
Pawan.

Hi,
Common Errors can be like
1. SID Failure while loading data.
2. Activation Failure.
3. Idoc failure
4. Failure in Source System.
5. Table space issue while loading.
6.No SID found for a characteristics
7.No Data found in the soucre system
8.DATASET Errors: Short dump with Various DATASET errors
9.Hierarchy load fails with error Incorrect Hierarchy Structure with Consistency Check / NodeID XXXXX not included in the Hierarchy.
10.Invalid character error
11.File not found (System Command for file check failed).
12.Error occurred due to Short Dump.
13.Attribute Change Run failed - ALEREMOTEBW was locked.
Thanks,
Nagesh.
Edited by: Nagesh Mule on Jan 30, 2008 7:19 AM

Process chain failure due to weekly maintanence

Hi experts,
we have BI sytem shutdown every week ok sundays due weekly system maintanence.In that process we have few process chain failure as well as batch job failures and each time we have to fix it by manual loading of data.
Any one help me fixing it once for ever.
Thanks for your help.
Thanks
Smitha.

Hi,
Is ur PC running when the system is shut down?? if yes then u have to fix manually...The best practice is to finish off the loads before the system is shut down. Make sure that all the deltas are pulled before the system is down..
try this for restarting PC
/people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
after cleaning up all the datatargets u can restart it as mentioned in the above link...
Regards,
B

Process chain overall status red - single processes green

Hi,
I'm monitoring a process chain in RSPCM. Some of the steps within the chain went red during the run but went green after repeating those steps. But now my overall status of the chain is still red. How can I set the overall status of a process chain without rerunning it? I don't want to set the status of a single process step but the overall status of the process chain as all steps of the chain are green now.
Cheers,
Alex

If you process chain is designed like
Ex: ZABC
Start-->Local Process chain
And assuming if any process failed inside teh local process chain , the entire Local process chain will be in Red, If you want forcefully change this ZABC chain, then
Goto Log view and Docuble click on the Local Process chain>Goto Chain tab>Copy the Variant and Instance
Goto Se11--> RSPCPROCESSLOG >Pass the copied Variant and Instance here and then execute>Copy the Log id from generated table entry
Now got Se37--> rspc_process_finish -->Enter the copied Variant , Instance , Log id , I_Type , I_State ('G' For Sucessfuly completed) and execute. Now the Local process chian will turn to Green and then the entire PC will in turn green(since this chain has only start process and Local process types, where as start process type is already in Green colour)
Or if you chain is designed like
Start>IP>Delete index>DTPCreate index...
Then Copy the variant and instance of the Last process type in the process chain and the same procedure as mentioned above
Edited by: YJV on Aug 19, 2010 12:11 PM

'AND' process in a process chain failure - need help

For the first time and out of no where, two separate 'AND' processes in two separate process chains failed on two separate days. It displayed error the same messages in both isntances as below. It seems that when the first load completed and the second was still in progress, this 'AND' attempted excecute and failed.
I had to manually resume the chain by setting the 'AND' status'to 'G' in RSPCPROCESSLOG table. I also plan to recreate those 'AND'.
But did anyone here experience this problem and know the root cause?
Thanks for any assistance!
Julian
This AND process is not waiting for event RSPROCESS, parameter
Job cancelled after system exception ERROR_MESSAGE

Thanks, Shambhu!
I am planning to create new ones. But my problem is that I hate to recreate all 'AND's I have in all our chains. There are a lot of them. But if I don't, I have no idea which is the next victim ...
Julian

Process Chain step status

Hello All,
In one of our process chain , we have an AND step, where in its checks its 4 preeceding steps, its all 4 are green,the AND Step executes and it goes to the next step.
Chain is running fine since many years. But yesterday , we faced the issue that even if the preeceding steps were green, the AND step status showed Completed rather it should show Successfully Completed.
So we had to manually change the status to Successfully Completed and it went fine.
We check with the Basis also, the system was fine during that point.
Any pointers why the step did not get the Status as Successfully Completed.
Job name: BI_PROCESS_AND
Regards,
Mayank

Hi,
You can find the necessary logs & status of the process chains in the RSPCLOGCHAIN table.
Let's know the status.
Also check in table RSPCPROCESSLOG
Let us know the details.
Reg
Pra

Process chain failure

Hi Guys,
We have process chain defined for sales order history upload from BW to APO planning area. Its failed with logs :
1- DataSource 8PBSD_C01 has to be replicated (time stamp, see long text).
DataSource 8PBSD_C01 does not have the same status as the source system in the Business Information Warehouse.
The time stamp in the source system is 19.12.2008 23:55:19.
The time stamp in the BW system is 30.07.2008 16:36:49.
2- Errors in source system.
Message no. RSM340
The process chain failed at very first step. please help to resolve it.
Quick question:
1. how to see the planning area wether it's on full load or delta load?
2. how to compare the planning area data and infocube data so that i can see data difference?
Cheers
PK

Thanks a lot Venkat. Here is process steps which i am going to follow.Since, i am doing it very first time ,please let me know if any step is missing/doing anything wrong.
Steps to solve this problem
Replicate data source
Step 1 u2013 Replicate source system. In RSA1 go to BW data source data mart -BW info cube (8PBSD_C01). Right click on info cube and click on REPLICATE META DATA.
STEP 2- Activate Transformation rule for APO info cube 8PBSCM_C04 and save in transport request.
STEP 2.1- Activate Data Transfer Process and save in same transport number.
STEP 3- Delete initializations in info package.
STEP 4 u2013 Select Delta initialization with data transfer.
STEP 5 u2013 Execute info package.
Prerequisites
STEP 1- Delete APO info cube 8PBSCM_C04 data.(how to do it?)
STEP 2- Delete PSA data.(how to do it?)
STEP 3- Delete Index in APO info cube 8PBSCM_C04. (Manage  performance delete index).(how to do it?)
STEP 4- Check planning area data in Live Cache. Delete and regenerate Live Cache.(how to do it?)

Process Chains - Incompletion Status

Hi,
I am having regular scheduled process chain. In the chain log, At the middle of the chain, chain was showing green, rest of the chain was showing gray color. But i can see rest of the data loads completed after checking the data targets manually.
Can you please tell me the reason, why the rest of the process chain is not showing complete status (Green status) in log view?
Best Regards,
Venkata

Hi
The reason may be becose...
The chain was ran twice....
When the Chain PC ran twice .. the PC gets hang.. there is a note on this issue...
Please serach the note witht he Key word : "Process chain hangs"..
And there is a Big discussin which was raised by Pradep Patil.. please search once.. that thread . u will get lot if info...
hope it helps..
regards
AK
HERE IS THE NOTE NO: 833168 please check it once...
Message was edited by:
A K

Urgent!! Process Chain Failure!!

Hi Guru's:
One of our PC's failed today with the below error message:
@5C@ Process Local Process Chain, variant SF 45 Account Recievable Tran. Data. has status Canceled (instance 2L9PVZWCAX8DTIDK5TFKL1T @35@
Help needed!
Rgds,
BH

It looks like the process was aborted externally. Check the data targets, if the contain any failed requests, delete these and restart the process chain.

Process chain failure at AND condition

Hi gurus,
Please help me with this issue .
the process chain is failing at the AND process after the DTPgets succesful . its giving the error message as"THIS AND PROCESS IS NOT WAITING FOR EVENT RS PROCESS".
PLEASE SUGGEST.

Yes,
there are two dtps which are connected to this AND process.process chain is successful untill this dtps and failed at this AND condition. please suggest to fix this and let me know wht will be the possible reason for this failure.
thanks for your help

Process chain inyellow status.

HI Experts,
I am runnig a process chain.one of the process is activation of DSO.it is succesful.i can see the sucees message in disply messags and manage of the dso i can see the bex symbol.but the process is in yellow for long time.and next process is in waiting..i dont have authoriation to run RSPC_PROCESS_FINISH functional module.
what could be thereason and how go head..
regards..roi

Hi,
For your issue please check whether the overall status is green or still is in processing?
If it is green in moniter screen then we can forcebly make it as green and then proceed further.
If it is a process chain issue then its mandat to have authorization to execute RSPC_PROCESS_FINISH.
Regards,

Importing TR related to Process chains failure in quality

Hi I am getting following error while transporting process chains from dev to quality it is saying method execution failure and log is giving as below. please suggest me the solution.
Execution of programs after import (XPRA)
Transport request   : SCDK904729
System              : SCQ
tp path             : tp
Version and release: 372.04.82 700
Post-import methods for change/transport request: SCDK904729
Post-import method RS_AFTER_IMPORT started for RSPC L, date and time: 20100526112312
Start of the after-import method RS_RSPT_AFTER_IMPORT for object type(s) RSPT (Activation Mode)
Start of the after-import method RS_RSPV_AFTER_IMPORT for object type(s) RSPV (Activation Mode)
Start of the after-import method RS_RSPC_AFTER_IMPORT for object type(s) RSPC (Activation Mode)
Version 'M' of chain Z_AP_BNL_SCEN_2_3 was saved without checking
Results of check for process     in chain :
Version 'M' of chain Z_AP_CZ_SCEN_2_3 was saved without checking
Results of check for process     in chain :
Version 'M' of chain Z_AP_PT_SCEN_2_3 was saved without checking
Results of check for process     in chain :
Version 'M' of chain Z_AP_SK_SCEN_2_3 was saved without checking
Results of check for process     in chain :
Start of the after-import method RS_RSPC_AFTER_IMPORT for object type(s) RSPC (Delete Mode)
Start of the after-import method RS_RSPV_AFTER_IMPORT for object type(s) RSPV (Delete Mode)
Start of the after-import method RS_RSPT_AFTER_IMPORT for object type(s) RSPT (Delete Mode)
Errors occurred during post-handling RS_AFTER_IMPORT for RSPC L
The errors affect the following components:
     BW-WHM (Warehouse Management)
Post-import methods of change/transport request SCDK904729 completed
       Start of subsequent processing ... 20100526112312
   Execute reports for change/transport request:
   Reports for change/transport request have been executed
        Start of................ 20100526112312
        End of.................. 20100526112312
   Execution of programs after import (XPRA)
   End date and time : 20100526112312
   Ended with return code: ===> 8 <===

In rspc , check for the four process chains given in error log ( there is a check button in the menu bar , once you click that it will show the process variant which has error as red )
Version 'M' of chain Z_AP_BNL_SCEN_2_3 was saved without checking
Results of check for process in chain :
Version 'M' of chain Z_AP_CZ_SCEN_2_3 was saved without checking
Results of check for process in chain :
Version 'M' of chain Z_AP_PT_SCEN_2_3 was saved without checking
Results of check for process in chain :
Version 'M' of chain Z_AP_SK_SCEN_2_3 was saved without checking

"Syntax error in the MDX statement " in Process chain failure??Urgent pls

Hi Experts,
could any one suggest me the procedure to rectify the below problems in process chain?
1."Syntax error in the MDX statement "
2."Error when getting data (Error when getting data (AXI))"
Rgds,
BH

In which case it'll be that Access has a different date format to MySQL, and you're trying to push the string "'25-Apr-12 10:55 PM" into Access, which it's not understanding. To get around this, you need to treat your variable as a true date/time object, rather than a formatted string.
CFQueryParams should be used on absolutely every database platform, they'll stop your website being vulnerable to SQL Injection attacks for one, which at the moment you're wide open to. Replace your query with something like this:
<cfquery name="input_comments" datasource="#DSN#" username="#DSNUSER#" password="#DSNPASS#">
      INSERT INTO comments(
                         commenter,
                         comment,
                         datetime,
                         post_id
               VALUES(
                         <cfqueryparam cfsqltype="cf_sql_varchar" value="#form.commenter#" />,
                         <cfqueryparam cfsqltype="cf_sql_varchar" value="#form.comment#" />,
                         now(),
                         <cfqueryparam cfsqltype="cf_sql_numeric" value="#form.post_id#" /> )
</cfquery>
The QueryParams will handle the data types for you, and should pass values around more safely and with fewer issues. Assuming you just want to store the current date and time you don't even need to get ColdFusion involved, as databases have their own functions for this. I believe Access' version is simply NOW(), so I've put that in your query.
Give the above a go.

Process chain failure, Status F already registered to instance

Similar Messages

Maybe you are looking for