Process chain for a particular selection profile

Hi, How can I create a process chain in DP to run only for selected selection profiles?

Hi Gurucharan
If you want DP back gorund jobs in the process chain, you will select the DP background processing step under demand planning. However the system will ask you to create a job and an activity so that you can attach the same to the process varaint while adding the step in the process chain.
While creating the job, you can select the selection profile and the aggregation level at which you want to run the job.
It is here that you can that you restrict your step to be executed only to your selection profile.
For creating the selection profile, you can either create the same in //MC77 or use the selection ids that you create the in the DP planning books.
Let me know if this helps.
Rgds, Sandeep

Similar Messages

  • Process Chain for Consolidation Functions

    Hi Team,
                  We have created a process chain for consolidation function as required by client, but we want the process chain to check the preceding  task status and only on successfully completion it should  proceed to next task. Is there a standard program or function module which does this, please update.
    Also we would like to pass dynamic permanent parameter values for the variants of task.
    Thanks in advance.
    Kind Regards
    Sridhar

    Hi Collet,
                 We have created a process chain  as  below:
    Period Initialization - Data Collection -LDS - Calculation of RE - Validation of RFD - Interunit Elimination -COI.
    I have created the Separate variants for  each of the above functions with program UCBATCH01.and the process chain is working fine.
    But we want the process chain to check the task status before it proceed to next task execution and stop if any error occurs in the task. Also we want the  dynamic selection of parameters from Permanent Parameters of Consolidation Monitor.
    Kind Regards
    sridhar

  • How to create process chain for 0EMPLOYEE

    I want to create process chain for 0EMPLOYEE attribution and text, how to create it and make a schedule for daily loading? Could anyone write steps in my case? Thanks!

    Hi,
    Follow the following steps:
    1. Go to RSPC->create->give name and disc of your chain.
    Start Variant Creation
    2.  Now you will be prompted to give a start variant,create a  new variant(click on page icon )
    3.Change Selections->date/ time.
    4.give date and time for start of the chain.
    5.click the check box for periodic job->period values->daily->save->save
    Addition of process types
    6.Select the process type "Execute Infopackage"
    7.select the name of the infopackage which loads attr data to 0EMPLOYEE.
    8.Attribute Change run will come automatically( if not then drag it as well and create variant )
    9.select the name of the infopackage which loads text data to 0EMPLOYEE.
    10.Attribute change run wil again follow.
    (connect the process types which are not connected,by right clicking the process types )
                                 start
                           IP A     IP  T
                          attr          attr
    A = attribute
    T = Text
    Please Reward points if useful
    Manish

  • Process chains for loading data to target is not functioning

    Hi SAPians,
    Recently, we have upgraded the firmware on IBM P590 with the help of IBM on Saturday i.e. 06/12/2008 (The firmware of P5-590 was SF235_209. It was upgraded to SF240_XXX) and since then the process chains for loading data to targets are not functioning properly.  We have stopped all the SAP services, database services & OS services from our end and services have been rebooted after firmware upgrade.
    However, the problem with the process chains that load transaction data and hierarchies is solved but the chains that load master data are still not working as scheduled.
    We tried to load the master data manually, by running DTP to load data to an object analysis code (attributes) the request remained YELLOW. After refreshing it several times, the request turned into RED. The error message was - PROCESSING TERMINATED (screenshot 1 attached).
    To mitigate this we tried deleting the bad request and it prompted with the below message:
    "Cannot lock request DTPR_4C37TCZGDUDX1PXL38LVD9CLJ of table ZANLYSIS for deletion (Message no. RSMPC178)" (screenshot 2 attached)
    Please advise us how the bad request should be deleted?
    Regards,
    Soujanya

    Hi Sowjanya,
    Follow the below procedure to make yellow request to RED:
    Use SE37, to execute the function module RSBM_GUI_CHANGE_USTATE
    From the next screen, for I_REQUID enter that request ID and execute.
    From the next screen, select 'Status Erroneous' radiobutton and continue.
    This Function Module, change the status of request from Green / Yellow to RED.
    Once it is RED, you can manually delete that request...
    Releasing LocK
    Gott Transaction Code SM12 and release the lock.
    Hope It helps you.
    Regardss,
    Nagaraju.V

  • Delta and Full process chain for same master data target.

    Hi  Friends,
    Can I do full update and delta update through process chain for same master data target and from same source ?
    Regards
    shekar reddy

    Hi Sriram,
    why you want to load full and delta for same master data object?
    you can achieve this but make sure that you select repair full option for full load IP.
    you have this option in scheduler in menu bar
    Regards,
    Venkatesh

  • Creating Process Chains for Infocube

    Hi All,
    I am trying to create a process chain for Vendor Evaluation(0PUR_C05).I created a start process and the "execute infopack" wich is delta load,so it prompted for "insert delete index" wich i created.Now,what to do next???
    the data flow is like this..
    infoapck(delta)->psa->infosource->infocube...
    is giving the selete index and rebuilding it mandatory??
    Please throw a light on this and help me out...
    Points will be rewarded..
    Regards,
    Manjari.

    Hi Manjari,
    How to do INIT?
    Go to Process Chain for Transaction Data.. and go to infopack you want to do INIT.
    Right click on that variant and click "Maintain Variant".
    Now if you have not yet loaded the cube using this Infopackage, you will find option Full update and Initialize data transfer in Update tab. If you have not loaded cube with any update, go to Initialize Data transfer and select the datatarget you want in Data Targets tab and check "Start immediately" in Scheduler tab and Execute.
    Now go to monitor screen and refresh it in times.
    Keep on monitoring in that screen until the requests become "Green".
    Once the requests are Green, come back to the Cube in RSA1 and check the data in Manage screen whether the data is populated fine or not.
    If the data is populated well, now go to Infopackage and in Update tab, change the Update technique to Delta. From now, you can have Delta upload using process chain.
    You will come to know whether the process chain is working properly or not by executing the process chain once. In your case, run the process chain only after you are done with INIT.
    If you have already loaded cube with Full load, follow the below process for INIT load...
    Go to Process Chain for Transaction Data.. and go to infopack and right click it. Click on Maintain Variant.
    InOrder to make it in INITIALISE DATA TRANSFER…goto... Menu>Scheduler>INITIALISATION OPTIONS FOR SOURCE SYSTEM..and click on it.
    You will get a popup with some requests in it. Select the requests and make them RED and delete all the requests and enter.
    And if u check in Update tab ,,for the update mode..it will be seen in INITIALISE DATA TRANSFER mode.
    Then move to DATA TARGETS tab and check the data target to which you want to load data.
    NOTE: If there is any data in the Cube, you want to do INIT, delete the data first (delete requests in Data target) and start INIT.
    Now move to "schedule" tab in Infopackage and check if the radio button is on START DATA LOAD IMMEDIATELY and click on the START button.
    Assign points if this helps u...
    Regards,
    KK.

  • PROCESS CHAIN FOR REAL TIME DATA AQUISITION

    hi,
    how can i create a process chain for dso which is getting data from xi push
    i created a deamon which is having both infopackage and reat time dtp
    now i want to close the request for 24 hours
    i have 10 dso's in this way
    how to create process chain for this?

    hi,
    how can i create a process chain for dso which is getting data from xi push
    i created a deamon which is having both infopackage and reat time dtp
    now i want to close the request for 24 hours
    i have 10 dso's in this way
    how to create process chain for this?

  • Problem in creating process chains for CO

    Hi Friends,
                     I have a CO cube "0OPA_C11" getting data from Three datasources,
    those are 0CO_OM_OPA_6(supports delta), 0CO_OM_OPA_1(full only), 0CO_OM_OPA_2(full only), i have already created process chain to this cube using these three datasources, the chain is like this,
    1. delete indexes
    2.0CO_OM_OPA_6(supports delta
    3.0CO_OM_OPA_1(full only),
    4.0CO_OM_OPA_1(request overlapping)
    5.0CO_OM_OPA_2(full only),
    6.0CO_OM_OPA_2(request overlapping)
    7.create indexes
            Is it right? here the chain is running, after completion of that, in manage of cube, it is showing only the request for 0CO_OM_OPA_2(full only), the request which were there earlier like Init request and new delta request for .0CO_OM_OPA_6, full request for 0CO_OM_OPA_1 are getting deleted, it is showing the request only for 0CO_OM_OPA_2,
      the way how i created the process chain is right or wrong? can anybody give me the solution?
    Thanx in Advance
    BalajiReddy

    Hi Nick,
              Thanx for your reply, everthing is ok what you've asked me to check, i think there is certain scenario to create the process chains for the data targets, which are getting data from multiple datasources, which support delta's as well as full.
              I want that scenario, can you tell me? or can anybody tell me?
    The right points are assigned to the right answers.
    Thanx in advance
    balajireddy

  • Error in Process chain for CO-PC

    Dear ALL
                I am facing one problem.I have a process chain for CO-PC cost object controlling.In that after start process i have another process chain Manufacturing order.After this other processes are there.Upto 4th march i have the delta running fine.After that the manufacturing order PC is failing when i open the process chain i find its failing in DTP section.
    Now what i did is i run the DTP for manufacturing order actually it consist of ATTRIBUTES AND TEXTS.After finishing i find in manage that the records are transferred but 0 records added and when i find the log its saying
    @5C@     0PRODORDER : Data record 1 ('000001000000 ') : Duplicate data record     RSDMD     191     
    Thanks in Advance

    Hi,
    Check below these links for more business knowledge about CO-PC.
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/COPCIS/COPCIS.pdf
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/fb07ab90-0201-0010-c489-d527d39cc0c6.
    Regards,
    Praveena.

  • Error in Process Chain for Delta pack

    Hi All,
    Here I am facing error in process chain for delta pack.
    Error:
         Last delta upload not yet completed. Cancel     I     
    Please send me the solution asap.
    Thanks

    Hi,
    This message means there may be a load triggered by the same infopackage that may be still running or may be still having yellow status. Go to the monitor screen from this IP itself and it will show the paricular request (it will be the latest one). See if that load is active and running. If its active try to find out if load is happening, if its happening you may let it progress. If its not active you need to force the status to red and delete from the target. Once this is done you can retrigger the load. If its a datamart load you may need to reset the data mart status before the triggering the load.
    Refer
    Last delta update is not yet completed
    Last delta update not yet completed-PC Chain Error
    Last Delta Not Yet Completed
    This is the same issue as yours.
    Thanks,
    JituK

  • How to create process chains for Master Data?

    I need information on " how we can create process Chains for Master Data"

    Hi Sachin,
      http://help.sap.com/saphelp_bw33/helpdata/en/ad/6b023b6069d22ee10000000a11402f/frameset.htm
    and also Modelling aspects in process chains (ppt)
    https://websmp109.sap-ag.de/~sapidb/011000358700002337702003
    Hope this helps.
    Srini

  • How to Create Process Chain for Remote Cube.

    Hi,
              I created Remote info cube, data from ECC, loaded Successfully, I want to create Process Chain for Reomte Cube, Please Help me.
    Thanks,
    Nandish Gowda

    Hi Nandish,
    After initialization, th next delta will come as per your delta nature, if it is 0calday: Then your next delta will come tomorrow only.
    If you are able to 7 records in RSA3, why not in PSA( Why it's only 5 records). Analyze this closely.
    Sometimes, RSA3 exactly doesn't match with PSA because, RSA3 works on update mode F.
    Regards,
    Suman

  • HOW TO CREATE PROCESS CHAIN FOR PSA ARCHIVING

    SDN EXPERTS,
    i like to create process chain for archiving. but i dont see any event for archiving when i go to create a process chain for PSA archiving. please let me know.
    thanks

    Hi,
    In the below document on the 14th page it says it is not possible to archive the master data & PSA.
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f47fec9f-0501-0010-ce84-8a7231715ae6
    As per my understanding..
    But one thing you can do is use another ODS and load the same data that you're loading to something else and try to archive that data(Only if you have transformations in the current CUBE/ODS).
    Correct me if i was wrong and eloborate your requirement.
    Regards, Siva

  • How to create Process chain for Aggregate for Master data

    Hello friends,
    I created Aggregates on Navigational Attributes.
    Now they are working fine, but i need to know that how shall i create the Roll up for Aggregates on Navigational Attributes.
    The point is the master data changes frequently a lot of time for e.g. for 0customer etc.....
    So if any one can send me the step by step documents so as to know how to roll up the Aggregates for Navigation attributes or for aggregates created on Master data....
    How to create process chains for the same ?????????
    Because if master data changes, then rolling up the aggregates straight forward will not help.
    So we need to write a process chain so that it deactivates the aggregate and reactivate again and fill up again..........
    If i mis interpreted something please rectify it.......
    Please advise

    Hello,
    the changerun that you have to schedule in order to activate the master data will adjust the aggregates automatically.  There is no need to deactivate them after master data loads.
    Best regards,
    Ralf

  • Table to check number of entries in an Infocube for a particular selection

    Hi All,
    Is there a table in BW system which would give a the number of entries in an infocube for a particular selection just like the flatR/3 table which has the button on top for checking the number of records?
    Any close work around to check the number of entries in an Infocube would be appreciated.I have tried to find out the number of entries from F & E table but in vain.

    Hello,
    You can try the following:
    1) Right click on cube display data, select all attributes and nav attributes yo are interested in
    2) Go to field selection for output, here select only the nav attribute you want the no of records against (dont select any KF) , hit execute
    3) In selection screen provide the selection you want to give
    4) Scroll down, uncheck do no use nay conversion and use mat aggregates, keep Max no of hits blank
    5) Check use DB aggregation and output no of hits
    This will give you the number of records for the nav attribute value u have selected.
    You can use sum function in the ALV GRID if you want to sum up multiple values.
    Regards,
    Shashank

Maybe you are looking for