Process chain in yellow
hi sapgurus,
One of Meta chain in parent Process chain got stuck for a long time Yesterday,because the infopackages stayed Didn't run and stayed in yellow colour,So i manually restarted the Meta chain .Though the Meta chain process ran well ,Meta chain in main Parent chain is in Yellow colour since yesterday .
Is there any way to turn Manually the Metachain to red colour .
Thanks in advance.
Hi JS,
once check the infopackages, DTPs and other process steps are activated or not. if not, activated all those steps.
this will resolve your problem.
help full link:
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417400)ID0205146750DB01963979007127950697End?blog=/pub/wlg/8284
Regards,
Suman
Similar Messages
-
Process chain remains yellow even it is OK
Hello,
I have a process chain which contains many master data loadings.
It can happen that when I log in the morning and check my process chain that have been executed during the night, I always have processes in yellow (not finished).
However when I look these processes in yellow, I can see that the job and loading has been finished a long time ago (in green, everything ok) and I can see that a new event has been executed to follow the process chain.
So why does the process doesnt finish and take green color ?
I didn't see any OSS note about that problem. Does anybody know about it ?
Regards
Vanessa R.Hi,
Activate the process chain once and schedule it again.
Hope this helps. -
Activating Process chain with Yellow message about index recreation
Hi SDN Community
As part of a Process Chain which loads data into an infocube,
If an index recreation is not included in the process chain, we get the following warning message:
A type "Generate Index" process has to follow process "Execute InfoPackage" var.ZPAK_4CFH2W389QSOOUU1UVP8PBLFU in the chain
As we do not want to have the index recreation in this particular chain, and rather, another chain,
will there be any issue of having this process chain in this warning message mode without an index recreation.
Thank you.
SimonIndex recreation is not mandated because you have the option to either create it or not. Recreating/rebuilding your index improves read time and so it is recommended. If you are creating the index at a subsequent step you can confidently ignore the warning message.
Regards, -
Process chain in Yellow status
Hi All,
We have a strange situation.
We are having a meta chain with 2 local chains.all the steps in the local chain completed successfully. But the local chain status is in yellow, thats the reason the below local chain has not started.This is happening from 2 days.
We are in BI7 and in Patch 18.
Please suggest on this.
Thanks in advanceHi JS,
once check the infopackages, DTPs and other process steps are activated or not. if not, activated all those steps.
this will resolve your problem.
help full link:
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417400)ID0205146750DB01963979007127950697End?blog=/pub/wlg/8284
Regards,
Suman -
Error in process chain when running package (data manager)
Hello experts,
I try to run the following how to : "move date between applications using Data Manager ..."
Yon can find the pdf here : http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/b0480970-894f-2d10-f9a5-d4b1160be203
I'm looking after someone who used it successfully, on my side after implementing all steps and running the package I get the message "IMMEDIATE RUN: Request to run the package on the server was successful The package is now running"
When I look the log for the process chain, overall status of the process chain is yellow, and steps "modify dynamically" and "clear BPC Tables" are in error.
I can't get any usefull error messages.
If someone has an idea to have details about those errors, it will be appreciated.
Points will be awarded, thanks in advance.
Guillaume P.Hello Experts,
I am also facing the same issue with PC failing at Modify_Dynamically step....
This process type is working fine when used in standard delivered process chain to load transaction data.
I tried using this variant in my cutsom chain, but it fails.
Please suggest.....
Thx....D -
Process chain--failed infopackage--urgent....
Hi Experts,
can anyone tell me why the process chain when triggered has successfully started but the first infopackages after the start varient did not sucessfully run.
the infopackages show in the process chain in yellow status as if the data loadings are taking place but when u go to the monitor screen the data loadings will not be taking place. if you manually trigger the infopackage then only the data loadings are taking place.
what could be the reason and how to make the process chain run successfully after it gets triggered.
i have deleted all the released jobs for all the processes in the process chain and triggered manually that chain but it is of no use. still the same problem is persisting, is there anything on BW part that we could or is it Basis work that needs to be done for the solution of this type of problem.Hi Experts,
can anyone tell me why the process chain when triggered has successfully started but the first infopackages after the start varient did not sucessfully run.
the infopackages show in the process chain in yellow status as if the data loadings are taking place but when u go to the monitor screen the data loadings will not be taking place. if you manually trigger the infopackage then only the data loadings are taking place.
what could be the reason and how to make the process chain run successfully after it gets triggered.
i have deleted all the released jobs for all the processes in the process chain and triggered manually that chain but it is of no use. still the same problem is persisting, is there anything on BW part that we could or is it Basis work that needs to be done for the solution of this type of problem. -
Process Chain problem related to Update ODS Object Data (Further Update)
In the process chain, the data is loaded to an ODS first then feed to an InfoCube by kind of data mart load. But when checking the process chain, getting yellow warning msg:
A type "Update ODS Object Data (Further Update)" process has to follow process "Activate ODS Object Data" var.our_infopackage_name in the chain
Message no. RSMPC016
If we add the variant "Update ODS Object Data (Further Update) after the activation of the ODS and before the InfoPackage to feed data to the cube, then another yellow warning shows up for the InfoPackage of loading data to the InfoCube that says the Update variant can not be before the loading to this Cube and etc.
What should we do to have the problem resolved?
Thankshey Dinesh,
How to have a wait time for the load to the cube?
I've given you "Very helpful" rewarding points and after you give the answer to the above, I will give you the "Solve problem" rewarding points.
Thanks -
Process chain / DM error in 'Modify dynamically' process
Hello experts,
I try to run the following how to : "move date between applications using Data Manager ..."
Yon can find the pdf here : http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/b0480970-894f-2d10-f9a5-d4b1160be203
I'm looking after someone who used it successfully, on my side after implementing all steps and running the package I get the message "IMMEDIATE RUN: Request to run the package on the server was successful The package is now running"
When I look the log for the process chain, overall status of the process chain is yellow, and steps "modify dynamically" and "clear BPC Tables" are in error.
I can't get any usefull error messages.
Thx....DHi Deepak,
We are experiencing a similar issue while trying to Light optimize one Application. The step "Clear BPC Tables" stays in red status, in addition to "Plan mode on" process. The Application Set has three applications, but this issue only happens regarding one of them.
Have you found a solution from SAP to this problem or any workaround?
Regards,
Maximiliano -
Process chain hungs if run automatically
Hello
My process chain hungs (yellow status) if its run automatically by scheduler.
However, it completes succesfully if I run it manually.
Do you know any reason why?Hey,
Probably the PC start job gets released and never reaches the work processor. Please check the availability of work processors when the PC starts and try to see if the job gets into released state. Now, try to manually schedule this job immediately and see if the PC starts. If this is the case, you need to ask your basis guys to configure the system properly. Does this happen with som other jobs also?
Thanks and Regards
Subray Hegde -
How to stop the process chain showing status as yellow but no process step
Dear Friends,
How to stop the process chain showing status as yellow but no process step is running in that process chain.
We have manually triggered the process chain for sales it finished successfully till load data but the next step is create index and DB statistics. Both of this steps are in unscheduled position only and no background job for this.
Please guide me.
Thanking you in advance.
Regards,
ShubhangiHi,
At times even I have faced this situation. During those times, running the Function module RSPC_PROCESS_FINISH by passing the right parameters came to my rescue.
Regards,
Raj -
Process in Process chain yellow instead green
Experts,
since a few days we face the following problem in our productive BW machine:
in process chains specific process steps (mainly infoPackages and DTPs) remain
yellow although the InfoPackage/DTP itself is green. This leads to the situation that the chain
does not continue.
Has anyone faced a similar poblem and can povide a solutiont? what's wrong here?
Best regards
StefanHi Stefan,
Check if there are any other infopackage/DTp loads for this DSO/ info cube was running at the same time or may be a bit earlier due to which load into the Data target was not being successful and remained in YELLOW status forever.
try using the FM RSPC_PROCESS_FINISH to manually change the status of the PC to green.
Regards
KP -
Process in Process chain that shows yellow inspite of being green
Hi,
I have a process chain where one of the processes shows yellow when I look at it in RSMON log view. In the process monitor however it has status 'green'. also the chain is set up in such a manner that the next process does not start unless this current process has a status of red or green. But the next process started and has green status in both RSMON and process monitor. When i click on the context menu for the process that shows Yellow, I get an extra option of 'End process again'. Could anybody please tell me what this option does and why the process which is completed still showing yellow.
Thanks.
JayaHi Stefan,
Check if there are any other infopackage/DTp loads for this DSO/ info cube was running at the same time or may be a bit earlier due to which load into the Data target was not being successful and remained in YELLOW status forever.
try using the FM RSPC_PROCESS_FINISH to manually change the status of the PC to green.
Regards
KP -
Process Chain Red 'X', Exec Infopckg Yellow, Infopckg monitor/data correct
Dear and respectable colleagues of the forum,
I am experiencing a problem in a process chain when executing infopackages. The process chain has 6 "Execute infopackage" processes. Sometimes (1 of 4 attempts average) my process chain ended with red color with 'X' status in the Process Chain Display Log View.
Reviewing within the chain Log, there is one of the "Execute infopackage" processes that appears in yellow color (it loads from direct update ODS to an infocube). However, revising the Logs for its corresponding Infopackage execution I found that it says that "Data successfully updated". Moreover, If I review the data loaded it seems to have been loaded correctly.
Then, Why does the "Execute infopackage" process in PC finishes with yellow color if the Infopackage execution itself finishes correclty?
To complete the whole scenario: I execute this process chain every night from an Abap program; the program has a Loop that traverses a table, and executes the process chain as many times as the quantity of rows in that table (table has 10 rows meaning offices). As you can understand, the chain is executed 10 times, and the error occurs in any of the 6 "Execute infopackage" processes indistinctly.
I review ST22 and SM37 for all users for the datetime when the error occured butnothing bizarre was reported. It is left to review SM21.
The following is the detail of messages.
Logs for Execute Infopackage
Data successfully updated
Monitor of Infopackage
Details Tab
Requests (messages): Everything OK
Extraction (messages): Everything OK
Transfer (IDocs and TRFC): Everything OK
Processing (data packet): Everything OK
Data Package 1 ( 45 Records ) : Everything OK
Transfer Rules ( 45 -> 45 Records ) : No errors
Update rules ( 45 -> 45 Records ) : No errors
Update ( 45 new / 0 changed ) : No errors
Processing end : No errors
Process Chains : Errors occurred
Llena cubos de carteras vtas sec por distrib - automDear s v desh,
I am on SAP BW 3.5, I already checked the cube and it is green - all right.
The message in the infopackage excution node in the process chain says (non-error):
"Data successfully updated"
The error message in process chain monitor (log) says:
......"Overall status: Error occurred: or: Missing messages
............Process Chains : Errors occurred"
I just realized that there is no messages at all in the infopackage monitor (log).
I have received a clue, someone asked me to review note 1396417, and I will.
Regards
Juan Alonso Teevin -
Process chain stops in infopackage with yellow status
Hi Gurus,
We are experiencing some difficulties regarding the use of process chains with warnings. Our SAP BI system is connected to an ETL server which feeds us with data from other systems. We have a query that has a push-button functionality that starts a process chain beginning with data extraction with an infopackage and ending in a infocube. The problem we have nowadays is that whenever the ETL workflow fails the infopackage status remains yellow, while our objective would be a red status. To try and solve this problem we forced a timeout in the infopackage. Once we check the log in the process chain it displays a message containing something like "status request modified , do you wish to add subsequent processes?", if we say yes it refreshes the status of the infopackage to red and it all goes ok. What we want is to get rid of this warning and that the status is automatically changed. We've checked other posts and we didn't reach any conclusion... Note 708480 gives us a possibility of automatic desicion but how could we integrate it in our process chains since it is based on shcedulling and not triggers?
Your help would be much appreciated,
Thank you
Bruno RodriguesHi,
We have two connected links in the process, one to continue the process chain when process status is green and other link to red status. The problem is the process status remains yellow until our confirmation in pop-up.
The process chain should be started by user in web browser. So, it isn't possible run it in background.
Thank you,
Regards,
BR -
Process Chain load step in yellow status
We are having a process chain with a load step.The load step is run with init with data transfer.
The load step is scheduled for the next time without changing the option to delta update.So the load step turned yellow with the background job log stating that delete the init Request ID.
The process chain is scheduled for several times but the load steps are all yellow.I initialized with data transfer and then to delta update.
All the requests in data targets are green.But all the load steps are in yellow.please let me know how to make it green.I tried to change the status of the load step to green manually using the function module rsps_process_finish,but the status is not changing.
Please help me out.Thanks in advance.Hi,
From the Cube Manage > Environment > Automatic req processing > Chk Quality status to ok , chk this option if it is not done.
this should reslve the issue.
-Vikram
Maybe you are looking for
-
Need to upgrade sound driver in HP dx2390 OS: Windows 7 Home Premium 32 BIT
Hi ! I have just installed windows 7 on my desktop pc model: dx2390 Microtower hp s/n: 3cb91022f4 i download the sound the sound driver from hp drivers support but its not working. I update windows and realtek sound driver has been installed but i go
-
Is there any reason why my apple id and password allow log in to App Store but say password invalid when trying to activate Facetime - I thought that Id and password were the same for all functions ?
-
ABAP Proxy error during runtime but success for manuall test ?
Hi, I got scenario using inbound ABAP proxy. The problem is when i test the inbound proxy manually, it was sucessfully, but then if i run directly from sender got problem : Error during proxy processing An exception with the type CX_SY_DYN_CALL_ILLEG
-
How to catch dump in background spool
Hi Experts, I am a fresher and in background I want to execute a program, which is creating dump in production server and which I am not able to see the screenshots. The dump occurs, as I raise error message in start of selection. Can I see the dum
-
What application do I choose to download illustrator cc? when I try to download the app, I get a Launch Application window that says: this link needs to be opened with an application. Send to CreativeCloud(URIHandler) below I could click on Remeber m