Process Chain inconsistency

Hi All,
Actually my scenario is, there are a few process chains which not excuting after they were scheduled for a particular time. Almost everyday i need to manually trigger them. This was not the case even a few days back. Of these chains a few are consistently failing every day and everyday i need to manually schedule them.
Also there is no particular error message apart from "the chain was removed from scheduling"
Can you please suggest?

Hi,
HACR (Hierarchy attribute change run )is nothing but change run process to
1)update master data changes and for 2)Re-adjusting the aggregates in cube.
Please check below links:
http://help.sap.com/saphelp_nw70/helpdata/en/c5/40813b680c250fe10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a67ece07211d2acb80000e829fbfe/frameset.htm
Re: Attribute change run?
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/fe8dbb80-0c01-0010-fe84-b76d0d07db34
http://help.sap.com/saphelp_nw04/helpdata/en/28/15ef3957fd0a1be10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/b8/3cf839fd35384de10000000a11402f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/60/8def3981fe5d7de10000000a114084/frameset.htm
I have faces few process chain failures due to HACR was running.
Regards,
Deepak Chavan

Similar Messages

BI IP Executing planning sequence via process chain not possible

Hi,
we use BI IP and have defined a process chain (RSPC) with value type process planning sequence. When we execute it, we get error message
"Inconsistent input parameter (parameter: <unknown>, value <unknown>)"
When we execute this planning sequence via the modeller or via SE38 RSPLS_PLSEQ_EXECUTE everything works fine. I thougt the cause could be the user of the job itself (job is executed with different user, and variant of planning sequence is user-dependent!), but I changed the user in the job itself as well without results.
any thoughts?
regards
D
null

Hi,
I executed with my user and have a SAP_ALL authorization. Perhaps it could be because we use authorisation with the old method (4.0) (-> I'm not sure on this). I also think it has to do with authorization. I'll check this out with our authorization consultant.
D

BI Content 7.57 SP4 Activating Process Chain

Hi,
I am trying to activate a process chain from BI content . My source system is ERP 6.0. While collecting objects for activating this Process Chain BW gives an errors. It says some of DTP and Transformations are missing. I have put two of the errors are at below.
When i search these missing objects on the BI content these objects are not exist. Also on the BW system they are not exist. I could not find any solution for this problem.
Can you please show me a way for solving this. I am stuck on this.
I am trying to activate following Process Chain.
Technical Name: 0HCM_FULL_P0EMPLOYEE
Name : Load Data for InfoObject 0EMPLOYEE
Error 1:
Shadow object DTP_DYF4USYQ4EYMWILRMUGLXW2KG cannot be expanded; chain is inconsistent
Message No. RSPC142
Diagnosis
You want to determine the objects that are source system-dependent for shadow object DTP_DYF4USYQ4EYMWILRMUGLXW2KG so that they can be inserted in the modified version of the process chain or of a referencing process. This was not possible.
Error 2:
Object DTP_ETKRN0DQM7QVOBZSVBC9J61HB (Data Transfer Process,DTPA) could not be collected for object 0HCM_FULL_P0EMPLOYEE (Process Chain,RSPC)
Message No. RSO296
Diagnosis
You have collected objects in the BW Metadata Repository. Associated objects for the object 0HCM_FULL_P0EMPLOYEE of type Process Chain,RSPC have also been collected. Object DTP_ETKRN0DQM7QVOBZSVBC9J61HB of type Data Transfer Process,DTPA was among these objects. This object
DTP_ETKRN0DQM7QVOBZSVBC9J61HB of type Data Transfer Process,DTPA, is not, however, available in the Metadata Repository.
System Response
Object DTP_ETKRN0DQM7QVOBZSVBC9J61HB of type Data Transfer Process,DTPA is ignored in further collections. The links for object 0HCM_FULL_P0EMPLOYEE of type Process Chain,RSPC are incomplete. This may result in not being able to activate this object.

Hello experts
I am not able to find support package name.
When i click on package level button from SAPM tcode
BI_CONT 703 0000 - Business Intelligence Content.
Is my BI_CONT add-on installed successfully?
And also i am not able to see BI_CONT in imported packages list.

Planning sequence in Process chain

HI,
I have used Planning sequence in process chain, But while executing it, it throws a following message
"Inconsistent input parameter (parameter: <unknown>, value <unknown>)""
Any Guess??
Regards,
Meiy

HI,
I have created a planning sequence in IP. I wanted to execute it in Process chain. While executing in process chain it throws a error which is mentioned above.
Regards,
meiy

PSA Deletion Process failed in Process Chain

Hi..I have a bizzarre issue...
I have created one process step in Process chain for deletion of PSA data of a particulur data source(o days).Every setting is fine.
Except for it fails and gives message:
Data inconsistency; Partition /BIC/B0001723000 not deleted
Then I do the repeat in Process Chain and it completes successfully.
Can anybody throw some light??

Hi,
Go to se14 and adjust it - /BIC/B0001723000
thats it,
Best regards,
dushyant.

Process chain failed with RSDMD199

Hi All,
While loading data through process chain, which includes master data and transactional data,
the job failed.
and the message is : RSDMD199
also when i checked in details tab in RSMO, i got meaasage like:
3510 data records in table /BIC/PZORD_NUM marked for deletion
also this job runs with 3 data packages, out of which 1st data package failed while updating in target.
But completed data package also has the same message like
3510 data records in table /BIC/PZORD_NUM marked for deletion
So can anybody explain me which type of error this is.......???
Thanks in advance,
Vishal

hi,
see Note 788588 which addresses the RSDMD199 error.
So shortly summarizing the problem of RSDMD 199.This error occurs due
to following reasons:
1. Master Data tables or indexes are inconsistent at the database level.
2. Master Data is inconsistent for the characteristic (RSRV check)
3. Same characteristic value spread across different datapackages and
they are loaded in parallel.
4. Parallel loading of time-dependent attributes or texts.
5. Delta update of an ODS object into a characteristic
6. Simultaneous data load into the following objects :
    a. Navigational Attributes of the characteristic
    b. Compounding Objects of the characteristic.
    c. Characteristics that are references of this one.
    d. Trasaction Data - Into Info Cubes that contain this
       characteristics
    e. ODS request activations - When the chacteristic is part of the
    ODS object.
Some of the above points are described in detail in the note 668466.
Colin

Error when trying to execute process chain !!

guys,
i am getting following error ..
" Inconsistency in delta administration"
where sud i look and what sud i do ?
also, when i try to check the process chain, its showing error, and followinig is the descreption..
"@5D@ A type "Generate Index" process has to follow process "Execute InfoPackage" var.ZPAK_D7GU4Y3X6N71IHL2KX784RWPX in the chain @35@
thaks
Edited by: Hon Bon on Jul 9, 2010 6:37 PM

well,
there are 3 meta chain, which runs at 3 different time ( fixed , like 1st run at 8:00 am, 2nd on 6 pm and 3rd on midnite ) and all three meta chains are the same, these meta chain has this pc, which i m working on. and thats y i need to put discision , bcoz for all 3 times there are 3 diff. DTP has to execute.
so, in my descision i am giving half an hour time interval ( 8:00 am to 9:00 am) , (6pm to 7pm ) and ( midnite to 1 am)
so, depending upon the time , when the meta chain gets executed , from my PC the only on DTP gets executes. and other 2 gets fails. same way at 6 pm when once again meta chain gets executed and when it comes to my PC my 2nd descision gets setisfies and execute 2nd DTP with option 2. here option 1 and 3 dont work...and so on
also , i have mention following formula in my descision
option 1 --> Local Time >= '14:10:00' AND Local Time <= '14:55:00'
option 2---> Local Time >= '18:05:00' AND Local Time <= '18:20:00'
option 3 ---> Local Time >= '20:00:00' AND Local Time <= '20:30:00'
see, these gives you some more information..
thanks

How to Stop the process chain if it in the middle of the process?

Hi,
Is there anyway that i can stop the process chain if it is in the middle of the process already?
Raj

"Hi,
First and foremost let me advice you to be very careful while doing this.
You can start from SM37, find the process WID/PID then go to SM50 or SM51 and kill it. Once its done come back to RSMO and check the request, it should be red but again manually force to red and save by clicking on the total status button in the status tab. This shuld ensure that the process is killed properly.
The next step will be to go to targets that you were loading and remove the red requests from those targets.
Note: For source system loads you may have to check if the request is running in the source system and kill if needed and pull it again.
But for BW datamart delta loads u may have reset the datamarts in case u are going to pull the delta again.
Different Ways to stop process chain
1)SM37 -->Kill Job
2)SM50/sm66- ->Kill process
3)RSPC>Job Log>Make the process RED forecefully.
4)RSPC>Process chain> main Menu"Remove from Scheduling" OR
5)se37-->RSPC_API_CHAIN_INTERRUPT
give RFC BW system name(technical) and process chain name(technical)
Steps 1 -3 stops the chain running in process
Steps 4-5 stops the chain AFTER the current job which is running is completed as sucessful or Failure by nature.
Rationale - 4-5
This function will only remove the jobs from schedule, which did not yet run. It will not kill running jobs, as this may leave the system in an inconsistent state, moreover killing processes is possible for synchronous processes only anyhow. This means, that there will be no errors with interrupted chains, which on the other
hand means an interrupted chain is not restartable. So for a running chain this function is intended to be an emergency break only. You can use it, however, to remove a scheduled chain from schedule, such that it does not start except by your product.
Re: Kill a Job
Re: Killing a process chain.
How to stop a process in a process chain?
Regards,
JituK

Process chain performance

Hi Experts
Process chain deletion and creation of indexes takes almost 30 mins even cube got loaded 100 records.
When compared to last month,this month time consumption of index processing drastically increased,cube has only 5 lakhs record,delta will fetch maximum of 20000 record.In PC can i drop the create and delete index steps,what could be the impact.
Thanks and regards
T.Gadhatharan

Hi,
Chk the time taken by this process chain for last 15 days and observe whether the increase in time of Indexes process has been gradual or sudden ?
Goto RSRV> All elementary tests > Database > Database indeces of an infocube and aggregates give the tech name of infocube and execute , chk the log and see if theres error then inform the concerned team about the issue.
Also, If u have authorisation to se14 , check the status of data base object status of the table by clicking on check button. Also u can check the status of indexes by clicking on Index > choose the index name from the list by double clicking > chk object log. If theres any inconsistency then it can identified from here and seek the help of basis team for the necessary correction.
Regards

Stoping of process chain

Hi Experts,
I have a process chain used with an Info spoke. I have accidently triggered the schedule. later, I went to SM37 and cancled the job. Subsequently by selecting menu processchain> remove from the schedule, I removed the chain from schedule also. Now I am seeing one of the process link is still green. I am not seeing any jobs in SM37 related to this..why is it so ? Does it mean that my cancelation was not effective ? how to make that green link to black ?

Dear Dave Bret ,
Different Ways to stop process chain
1)SM37 -->Kill Job
2)SM50/sm66- ->Kill process
3)RSPC>Job Log>Make the process RED forecefully.
4)RSPC>Process chain> main Menu"Remove from Scheduling" OR
5)se37-->RSPC_API_CHAIN_INTERRUPT
give RFC BW system name(technical) and process chain name(technical)
Steps 1 -3 stops the chain running in process
Steps 4-5 stops the chain AFTER the current job which is running is completed as sucessful or Failure by nature.
Rationale - 4-5
This function will only remove the jobs from schedule, which did not yet run. It will not kill running jobs, as this may leave the system in an inconsistent state, moreover killing processes is possible for synchronous processes only anyhow. This means, that there will be no errors with interrupted chains, which on the other
hand means an interrupted chain is not restartable. So for a running chain this function is intended to be an emergency break only. You can use it, however, to remove a scheduled chain from schedule, such that it does not start except by your product.
Hope this will help you out.
Regards
Vinay

Planning Sequence: Error when runnning in a Process Chain

When trying to run a planning sequence in a process chain (with the correct variable input variant) I receive the following error message:
Inconsistent input parameter (parameter: <unknown>, value <unknown>
When running this planning sequence in the modeler, it runs without errors.
Any help greatly appreciated.
Many thanks,
Matt

Hi,
Can you pls explain your requirement..
1)Are you trying to trigger this proces chain in the background?
2)Does the planning sequence which you are trying to execute in the process chain contains a planning function that is expecting some variables to be passed by the user?
Rgds
Shyam

Process Chain failed at Delete PSA event level

HI Every one,
I am monitoring process chains, which are running on daily basis.
I have one Delete PSA process chain, this chain contains only two events
1. Start Event 2. Delete from PSA.
Process chain failed at Deleted from PSA event level.
Below is the error message I got from the process chain screen.
"Data inconsistency in /bic/b0000231000 table,partition was not deleted"
"Delete request REQU_4353ACARKJNY70Z5F11 from PSA 8ZMMOM...."
Please help me by giving possible reasons for this error message and solution for this problem.
Thanks in advance.
Regards,
Narayana K.

hi,
Are you deleting the PSA requests using abap program?
Regards,
Vijay

Process Chain - Delete File from Application Server

Hi Gurus,
Im working with Process chain, and i have a load from a flat file, so my question is :
How can i delete that file from the application server after was loaded ?
THANKS IN ADVANCED !!! I REALLY APRECCIATE YOUR HELP.
Marcos

hi,
I have gone through the forum you have posted for deleting files from application server through process chain.
I have similar reuirement in my project.
Can you please provide me the solution?
Your inputs will be highly appreciated.
Thanks in advance.
Regards,
Lavanya.

Questions on Multiprovider and Process Chain

Hai All,
          I have two questions. One on Multiprovider and the other on Process chain.
1. Multiprovider:
          For example, I have 2 ODSs. ODS1 has Objects ORDER NUMBER, COUNTRY and PRODUCT, ODS2 has objects ORDER NUMBER, DELIVERY STATUS, CREATION DATE.
Now if I make a multiprovider on ODS1 and ODS2, then as ORDER NUMBER is common in both the ODSs, can I make a report like this:
ORDER NUMBER - DELIVERY STATUS, CREATION DATE?
         I have a problem here bacuase its not getting those details from the other ODS even though the ORDER NUMBER(value) is same. Am I making nay mistake or is it a system problem.
I beleive thats how a Multiprovider works.
2. Process chain:
                I have an END connector in my process chain that connects 3 processes and lets the following task start only after the success of all the above 3 processes.
The system is displaying the END connector seperately under each process. But the name and everything else is same. Is this a setting somewhere in the process chain?
Thank you.

Hi,
1. Those fields are in ODS2, you don't need to make a multiprovider.
2. You mean an AND connector. Maybe you need to refresh the screen. if this doesn't work, delete the three and connectors and insert a new one.
Hope this helps.
Regards,
Diego

BPM Process chain takes long time to process

We have BI7, Netweaver 2004s on Oracle and SUN Solaris
There is a process chain (BPM) which pulls data from the CRM system into BW. The scheduled time to run this chain is 0034 hrs. This chain should ideally complete before / around 0830 Hrs. Now the problem is that every alternate day this chain behaves normally and gets completed well before 0830 hrs but every alternate day this chain fails there are almost 40 chains running daily. Some are event triggered (dependent with each other) or some run in parallel. In this, (BPM) process chain, usually there are 5 requests with 3 Delta and 2 full uploads (Master Data). The delta uploads finishes in 30 minutes without any issues with very few record transfers. The first full upload is from 0034 hrs to approximately 0130 hrs and the 2nd upload is from 0130 hrs to 0230 hrs. Now if the 1st upload gets delayed then the people who are initiating these chains, stop the 2nd full upload and continue it after all the process chains are completed. Now this entire BPM process chain sometimes takes 17 -18 hrs to complete!!!!!
No other loads in CRM or BW when these process chains are running
CRM has background jobs to push IDOCS to BW which run every 2 minutes which runs successfully
Yesterday this chain got completed successfully (well within stipulated time) with over 33,00,000 records transferred but sometimes it has failed to transfer even 12,00,000 records!!
Attaching a zip file, please refer the 21 to 26 Analysis screen shot.doc from the zip file
Within the zip file, attaching Normal timings of daily process chains.xls the name explains it.
Also within the zip file refer BPM Infoprovider and data source screen shot.doc please refer this file as the infopackage (page 2) which was used in the process chain is not displayed later on in page number 6 BUT CHAIN GOT SUCESSFULLY COMPLETED
We have analyzed:--
1) The PSA data for BPM process chain for past few days
2) The info providers for BPM process chain for past few days
3) The ODS entries for BPM process chain for past few days
4) The point of failure of BPM process chain for past few days
5) The overall performance of all the process chains for past few days
6) The number of requests in BW for this process chain
7) The load on CRM system for past few days when this process chain ran on BW system
As per our analysis, there are couple of things which can be fixed in the BW system:--
1) The partner agreement (transaction WE20) defined for the partner LS/BP3CLNT475 mentions both message types RSSEND and RSINFO: -- collect IDOCs and pack size = 1 Since the pack size = 1 will generate 1 TRFC call per IDOC, it should be changed to 10 so that less number of TRFCs will be generated thus less overhead for the BW server resulting in the increase in performance
2) In the definition of destination for the concerned RFC in BW (SM59), the Technical Setting tab says the Load balancing option = No. We are planning to make it Yes
But we believe that though these changes will bring some increase in performance, this is not the root cause of the abnormal behavior of this chain as this chain runs successfully on every alternate day with approximately the same amount of load in it.
I was not able to attach the many screen shots or the info which I had gathered during my analysis. Please advice how do I attach these files
Best Regards,

Hi,
Normally index creation or deletion can take long time in case your database statistics are not updated properly, so can check stat after your data loading is completed and index generation is done, Do creation of database statistics.
Then try to recheck ...
Regards,
Satya

Process Chain inconsistency

Similar Messages

Maybe you are looking for