Process chain load not triggered automatically
Dear Experts,
I have created a process chain which goes like
Start >> Create Index >> Load Infopackage 1 >> Load 2 >> Load 3 >> followed by 3 more load infopackages...followed by Delete Index and subsequent process like Rollup and DB stats.All the infopackages loaded into same data target.
When the chain gets triggered first Load infopackage is succesfull later subsequent jobs did not trigger.
But if i Right click on next process and click "Repeat" the job starts and load gets succesfull. The same case with rest of the loads.
why arent they getting triggered automatically one after other.
is there any solution to the problem ?
Thanks in Advance
EDA
Hi Ellora,
In your scenario, I strongly suggets you to use the "Delete Index" only once since the data target is the same for all Infopackages. Again use "Create Index" only use. You can accomplish this by using the AND process greatly.
The flow may be like this...
START
DELETE INDEX
LOAD1 LOAD2 LOAD3
AND
|
CREATE INDEX
Ensure that you have scheduled the process chain in the START Variant.
Hope this helps...
Thanks,
Raj
Similar Messages
-
Process chain is not triggering
Hi All
We have around 4 process chains. these are triggering by an event and these are triggeing since 1 month.
We have checked and tried to run them direc scheduling with immediate option. But no use and the process chain will show in yellow and no log.
Can you please help us regarding this isssue.
Thanks in advance
SravaniHi All,
You do not have authorization for scheduling system commands
Message no. RSPC078
Diagnosis
You do not have authorization for authorization object XXXXXXXXX, command ZZZZZZZZZ, operating system 'Windows NT', host 'ZZZZZZZZz'.
System Response
You cannot schedule the process chain.
Procedure
Contact your system administrator.
This is the error am getting now and I tried to execute the through the event also. But am getting this message!!!
Thanks in advance -
Process chain is not triggering through event after BW Upgrade
Many of our process chains are event based.
After BW upgrade 7.0 to BW 7.31 we tried to trigger the event through SM64 Tcode. But the process chains are not getting triggered.
Could anyone please guide me what might be the issue.Hi Bharan,
Can you please check once the start variant of process chain which are based on event.I think it should trigger after event is triggred.
Regards,
Ganesh Bothe -
Process Chain is not triggered
HI Gurus
I have Scheduled the process chain on daily basis at 5:00pm (IST).But its not triggering every day.
I have checked in sm37 no jobs are scheduled.So I have to trigger it manually.
Why it is not triggered. What do I need to do resolve it.I am doing it in prod server.
regards
LoyeeHi,
try to execute RSPC_CHAIN_ACTIVATE_REMOTE function module in, it will ask for process chain and continue with execution then ur chain will be activated and scheduled.
Now trigger the event
Also Check this,,
oss note 511475-Scheduling jobs with BW background users
Symptom
You cannot schedule or perform any batch jobs with the BW or source system background user.
The error RSPC 065 occurs in the process chains:"Job could not be scheduled, termination with return code 8"
Other terms
RSPC065
Reason and Prerequisites
The user type is
"CPIC" up to 4.6B
"Communication" as of 4.6C
This user type may not execute or start any batch jobs, irrespective of the user authorizations.
Solution
Set the type of background user to
"Background" up to 4.6B
"System" as of 4.6C
This user type corresponds to the "Communication" type and may also perform background functions
Hope this helps u..
Best Regards,
VVenkat..
Edited by: Venkata Narayana Jakkampudi on Jan 7, 2009 4:52 PM -
In a process chain,the next process is not triggering automatically?
Hi All
We have have a metachain,in that we have many local chains,in one of the local chain once the above process is successfully completed then the next process is not triggering automatically,which should suppose to happen?
Can anyone help me out why this process is not triggering automatically and how/where to check?
As this problem is repeating daily and loads are delayed due to this
Regards
BaljiHi,
you can manually start that job, by changing the job insm37, it will show you the job priority ( A OR C.) you can change it to A, and youc an change your start condition also there.
or you can use this RSPC_PROCESS_FINISH to trigfer process.
But, process chain processes should be triggered automatically, i think this issue is due to load of jobs ( in your server there should be lot of jobs having higher priority than this job), this will solved automatically when load is less.
hope this will be helpfull.
v.sen.
Message was edited by:
Senthilkumar Viswanathan -
Custom output type is not triggering automatically
Hi Experts,
We have created a custom output type for Delivery idoc processing.
it is working fine for all ship to patrys.
but from last 2 months onwards we are facing problem for one ship to party.
output type is not triggering automatically but for rest of ship to party's it is triggering automatically.
we have maintained conditions and also selected trigger immediately.
earlier it was working fine, but from last 2 months onwards we are facing this problem.
Thanks
SaiHi,
Goto the Delivery document and in the Output screen check the Determine analysis for output.
There it will clearly show what is missing .
Please check that and revert back if you need more clarification.
regards,
santosh -
Re: Schedule a WEBI report once the BW process chain loading is completed
Hello Guys,
I want to schedule a webi report once the process chain in bw is sucessfully completed .Did any one face this situation before ?
is it possible to trigger a event from bw to webi and schedule a webi report to end users once the process chain loads the data into cube sucessfully
i searched sdn but didnt find any help related to this topic
can any one help me with the above issue asap
step 1 : Trigger the process chain load the data till cube
step 2 : add a process type whcih has program - at the end of the process chain
step 3 : trigger a event in BO inorder to schedule a webi report to end users from this program ? how to do it
i want to know how to trigger a event in bo from bw using r/3 program inorder to schedule a WEBI report
any help on this topic is highly appreciatedHi Venkat,
At present, there is no standard functionality available in SAP NetWeaver 2004s BW/BOBJ that offers this integration and automation.But you can do it as given in following link
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c09033ab-4593-2e10-5fa0-b23bcfa1575a?QuickLink=index&overridelayout=true&51887500308956
Regards,
Pushkar Dhale -
Infopackage in process chain is not scheduling
Hi All
One of infopackage in process chain is not scheduling and showing error message like "<b>Attributes are not yet maintained
Entire chain now has status 'R'</b>
what do we mean about this
can anyone will let me know in detail and how to correct this?
Regards
balajiHi balaji,
how big is your process chain ? I got a similar problem when I build a metachain with a lot of processes in the chain (more than 60). In this case, the error message is deceiving. If your process chain has similar numbers of processes, check OSS 942804 (Jobcount handling).
Kind regards,
Jürgen -
Process Chain : 0PM_INIT_P01 - Not Shown in RSPC
Dear Friends
I have installed 0PM_INIT_P01 (Initialisation:MTTR / MTBR) Process chain.
It installed successfully.
But i could not able to see in RSPC.
Can anybody tell me why it is...?
Some where i found authorization object S_RS_PC is needed for my user id. Is it so...?
Than how i can map to my user id...?
Points will be awarded for right answers
Regards
Raju SaravananFriends
Problem is, the installed process chain is not getting displayed in RSPC for further operations.
Before that, I have installed the Process Chain through business content (0PM_INIT_P01), and it got successfully installed. I had seen in SM37.
For testing purpose i have given the same name (0PM_INIT_P01) for another chain creation.
But system telling the name is already available.
My confusion, why it is not getting displayed in anywhere in RSPC.
Regards
Raju Saravanan -
Process chain is not getting scheduled
Hi all ,
Process chain is not getting shceduled , i have saved , checked and wanted to activate but its going to a loop and its not getting activated . please suggest some solution
Regards
AkhileshHi Akhilesh,
Can you check that your user has the necessary authorizations to schedule a job? Can you also check if there
is an error message generated in sm21 or dump in st22? You say as well that the scheduling is looping, in sm50 what
table/statement is the process looping over? Can you also let us know your BW release and support package level.
Best Regards,
Des -
Process Chain status not becomeing green even if all loads are successful
Hi,
The porcess chain status is not becoming green even if all loads are successful. How can I make it GREEN.
One more doubt I have.
Suppose I have 6 processes in my process chain and the 3rd process failed. If I run the function module RSPC_PROCESS_FINISH will start loading from the beginging or from the failed process.
I wish to load from the failed process onwards..what should I do ??
Kindly give the details.
BillUsing that FM.. u will be providing the Instance and Variant of the failed process.. and hence the reload will start from the failed process but not the entire chain...
In general the process status shud finish then or based on the link combination the change from one process to other will happen...
try to maintain a wait time between the process atleast 2 to 4 secs..
thanks
hope this helps.. -
Process Chain load step in yellow status
We are having a process chain with a load step.The load step is run with init with data transfer.
The load step is scheduled for the next time without changing the option to delta update.So the load step turned yellow with the background job log stating that delete the init Request ID.
The process chain is scheduled for several times but the load steps are all yellow.I initialized with data transfer and then to delta update.
All the requests in data targets are green.But all the load steps are in yellow.please let me know how to make it green.I tried to change the status of the load step to green manually using the function module rsps_process_finish,but the status is not changing.
Please help me out.Thanks in advance.Hi,
From the Cube Manage > Environment > Automatic req processing > Chk Quality status to ok , chk this option if it is not done.
this should reslve the issue.
-Vikram -
Process chain is not deleting overlapping requests
Hi all,
I did all the steps like I described on my earlier posts to delete the overlapping request from infopackage through process chain. I tested it in development and it works fine with any condition, I mean automation through event, date and after seven days. When it comes to production it is not giving me the same result. So when I checked the infopackage of production I saw a routine added in the data selection of infopackage to load two days old data in the routine. We do not have that added in the development. Now if this is causing issue, can I add a step in the routine to delete previous request after loading file in the data selection.
Code:
data: l_idx like sy-tabix.
read table l_t_range with key
fieldname = 'calday'.
l_idx = sy-tabix.
zdate = sy-datum - 2.
l_t_range-low = zdate.
l_t_range-sign = 'I'.
l_t_range-option = 'EQ'.
modify l_t_range index l_idx.
p_subrc = 0.
Please help,
Suni.
Edited by: BW on Feb 18, 2009 8:18 PMHi aanjaneya,
If you want to select and delete only the previous request of previous day, go to the infopackage and in data target tab there is option for each data target for setting the automatic deletion.
If you select it, you will get a window which has the option to delete the request. Select all the conditions and same or more comprehensive check box and also check the request date to yesterday and today option.
This will delete the request loaded yesterday and also with same selection from same source.
Hope this is clear.
Regards
Akhan -
Process chain was not getting trigerred
Hi Experts,
Chain "Weekly MSA Loads - Full Process" is not getting triggerred.
This chain is set to run after completion of ABAP program.
On 16th Jan, ABAP ptogram was successfully completed.Then ""Weekly MSA Loads - Full Process"" chain status was set to running (yellow). But no job was created. It got hung for more than a hour.
So we tried to trigger that chain with immedaiate option. We got an option "Server for scheduling". We didnt provide any server name. Then pressed Ok button. From then onwards, server went to refreshing state, but no job was created(BI_PROCESS_TRIGGER) and chain is not at all getting trigered.
We got the follwwing messages:
01/24/2009 06:49:48 Job started S 00 516
01/24/2009 06:49:48 Step 001 started (program RSPROCESS, variant &0000000655878, user ID BWREMOTE) S 00 550
01/24/2009 06:50:05 Communication buffer deleted from previous run 4CIS92GCZ3HQ5WVXKADF85TFQ (status X) I RSPC 87
01/24/2009 06:50:05 Version 'M' of chain ZPC_MSA_FULL_PROCESS was saved without checking S RSPC 19
01/24/2009 06:50:05 Version 'A' of chain ZPC_MSA_FULL_PROCESS was saved without checking S RSPC 19
So we cancelled that step (STOP transaction). From that day onwards this chain is not all getting trigerred in any way. We have checked the status of last log in RSPROCESSLOG table, its status is 'X'.
Please let us know to trigger this chain.Hi........
U told a program gives trigger to this Chain.............that means the Process chain is event based..........just right click on the Start process >> Change Selections >> Click on After event.......just cross check.......
Now copy the event from there..........Just to cross check that whether this event is a part of any Event collector or not.............this may be one of the possibilities............bcoz........if this Event is a part of an event collector..........then until all events get regisretered..........this chain will not trigger........So......Go to SE16 >> table name RSEVENTHEAD >> there in the EVENT field give the event name >> execute............if it is a part of a event collector..............Copy the event collector name from there........
then go to RSA1OLD(if u r in BI 7.0 .....otherwise RSA1)............in the top TOOLS tab >> Event collector >> Press F4 in the Event Chain(Name) field........search for the event collector name here...............now check whether all the events got registered or not...........
Now look..........BI_PROCESS_TRIGGER is the trigger job............after completion of this job only the chain will trigger......How u checked that the job was not started...........in SM37?..........look if so ..then there will be many BI_PROCESS_TRIGGER jobs............it is quite difficult ti identify the right job..........So the best way is.............right click on the Start process >> Display messages >> BacKg tab >> Click on Batch Monitor.................there u will be able to find the BI_PROCESS_TRIGGER which is going to trigger that particular chain..............u r saying the job did'nt started.............was the Start process in release state............this may happen.............if load is huge at that time in the system............I mean if many jobs trigger at a time..........there will be no free work process........
Sometimes the chain may start when the loads will reduce.............otherwise u should contact the basis people................
Anyways............u trigger the JOb manually right.........here I want to tell u one thing..............never Scedule a time based or Event based chain by right clicking on the Start process........and from there Change selection..............I mean to say never change the Start variant..............What u should always do...............go to the Planning mode of the chain.......Right click on the stsrt process >> Display scheduled Jobs >> Take one Released job..........in the top Job tab >> Repeat scheduling >> Immedite >> Uncheck the periodic job Check box >> Check and save.........
If u do in this way.............the original settings of the chain will never change............what I guess .........that the Event is removed fro the Settings of the Start Variant..........again u hav to schedule the Chain.......
Hope this helps.........
Regards,
Debjani...... -
Process chain Failed while triggering the job
Hi All,
Actually everyday delta request has been loading to the dataTarget of same data source through process chains thrice with different timings.
Today Problem is only once delta request has been loaded into data Target without error. It has not triggered furtherly (two more times)
When i have checked in the processchain its showing delta has been failed.
Generally in this scenario how i have to investigate for know the details of the problem? anybody can tell step by step?
Regards,
C.V.
Message was edited by: P.C.V.Hi
Right click on the failed process type and display messeges and go to the Process monitor push botton
if will take u to the Monitor screen
The best thing is go to the
1) SM37 and select the job in R3 and see the job log
2) RSMO and see the error messeges in the monitor for the request
give here the error messeges so that it will better to everybdy to help
regards
AK
Maybe you are looking for
-
Can I select the query elements of structure manually in transport conn
Hello all, I am trying to select a structure and the elements of the structure manually in transport connection. I am able to slect the structure from from query elements -> structure but now how can i select (manually) the items like new selections
-
Hi! I'm using tomcat 5.5 and I made a simple webapp: tomcat_dir/webapps/myapp I'm using root paths when refering to images, docs, servlets, and so within myapp (servlets, jsp, html, etc.)... For example: <img src="/myapp/imgs/pic1.jpg" ...> <form ...
-
hello all together, is there a way to plot for example 10 3d-curves at once in a 3d graph instead of sequentially? thanks for the feedback !
-
From searching the Apple web site there is a significant lack of information for Leopard software users using 10.5.8 upgrading to the latest Lion software. I have a recent iMAC from 2009 using Leopard software 10.5.8 and it is not that old software.
-
How can be more little the image on the computer?
Because the image is more longer than the size of the computer