Process Chain load step in yellow status

We are having a process chain with a load step.The load step is run with init with data transfer.
The load step is scheduled for the next time without changing the option to delta update.So the load step turned yellow with the background job log stating that delete the init Request ID.
The process chain is scheduled for several times but the load steps are all yellow.I initialized with data transfer and then to delta update.
All the requests in data targets are green.But all the load steps are in yellow.please let me know how to make it green.I tried to change the status of the load step to green manually using the function module rsps_process_finish,but the status is not changing.
Please help me out.Thanks in advance.

Hi,
From the Cube Manage > Environment > Automatic req processing > Chk Quality status to ok , chk this option if it is not done.
this should reslve the issue.
-Vikram

Similar Messages

Re: Schedule a WEBI report once the BW process chain loading is completed

Hello Guys,
I want to schedule a webi report once the process chain in bw is sucessfully completed .Did any one face this situation before ?
is it possible to trigger a event from bw to webi and schedule a webi report to end users once the process chain loads the data into cube sucessfully
i searched sdn but didnt find any help related to this topic
can any one help me with the above issue asap
step 1 : Trigger the process chain load the data till cube
step 2 : add a process type whcih has program - at the end of the process chain
step 3 : trigger a event in BO inorder to schedule a webi report to end users from this program ? how to do it
i want to know how to trigger a event in bo from bw using r/3 program inorder to schedule a WEBI report
any help on this topic is highly appreciated

Hi Venkat,
At present, there is no standard functionality available in SAP NetWeaver 2004s BW/BOBJ that offers this integration and automation.But you can do it as given in following link
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c09033ab-4593-2e10-5fa0-b23bcfa1575a?QuickLink=index&overridelayout=true&51887500308956
Regards,
Pushkar Dhale

Error in process chain pushing step

Hi Experts,
We encountered an error in process chain pushing step. The error is "Process ZXXXX, variant 4UBK25S73O99DNLFQ0Q55EBTY, ended with invalid status". Data is pushing from OHD to PI/XI system. Unable to trace error and even not able to see the variant in PC.
Could any one please give us your inputs on the error, if you experienced such type of error message. Your inputs/suggestions are highly appreciable.
Best Regards
Venkat...

Hi Ram, thank you for the quick response.
Yes, at source, all requests are available for reporting.
Source is a Cube and target is OHD (DB Table). From this OHD we are pushing data to PI system.
PC flow is: Start--->DTP--->Push Interface. The push interface step got failed.
Daily, it's working fine. Unfortunately, today failed
Any insights please...
BR
Venkat...

Load step in Yellow state even after completion

Hi people:
I have a situation here with aprocess chain.
When the process chain is triggered,there is a load step which stays
in yellow even after the load completes. We tried to push the step
forward,but the chain wont progress. So,we had to do the rest of the
steps in the process chain manually.
Why does this hangover step happens in the process chains?
Can some one give a solution to this situation, so that we don't have
to do the steps manually everytime the chain is struck at the step?
Any inputs are appreciated.
Thank you.

Hi,
Check the status of the Process Variant in RSPCPROCESSLOG table. If the status of the variant is not 'G' then the process will not move to the next step though the loads complete succesfully.
In this case you have to change the status to 'Completed' (G)manually.
This could be done using the Function Module 'RSPC_PROCESS_FINISH'.
Provide the below details in the FM
1) I_LOGIN - Login ID of your process variant (you can find this in RSPCPROCESSLOG table)
2) I_TYPE = CHAIN
3) I_VARIANT = Your Proces Chain variant (Optional)
4) I_INSTANCE = Double click on the object which was struck and click on Backg tab. Copy paste the instance.
4) I_STATE = G.
Hope this would resolve your issue.
Regards,
Anil Pragada

Process Chain Load Processing Time Issue

Hi All,
One my process Chain is running daily , but after 2 hours of load it is showing Red in the Monitor screen, but after 5 hours load is successful.
Why Monitor screen is showing Red?
Is it possible to Extend the load processing time in the Infopackage level?
for e.g- if they set as 60 seconds -- go to Red
I want to change to 120 seconds -- go to Red.
If yes...where we can do it ...please let me know the steps...
Regards,
Nithi.

hey hi,
double click on the infopackage -> go to "scheduler" on the top left corner of the menu -> click "Timeout time" and you have the different option to change it.
hope this helps.

Process chain node is in yellow colour but job completed successfully

Hi All,
I have one master data load process chain. This process chain have one child process chain also. Parent process chain was showing Fail for one child process chain. When I checked child process chain I got to know that one info package is still in the running state. When I checked the monitor of the data load , It is showing successful data load , even i have checked in batch job log , it is also showing ' JOB COMPLETED SUCCESSFULY'.
Now as this node is in ruuning state , all lined up process are on hold.
Please help me with this issue.
Thanks in advance.

hi,
open the child process chain, right click on the variant at which it is struck. note down the details such as log instance,variant.
open table rspcprocesslog in SE12 ,give the details of variant and job logs and find the instance id.
open tcode se38 ,enter program RSPC_PROCESS_FINISH.
execute it, enter the details obtained from table rspcprocesslog table for the same and set the status to "G" and execute.
the process chain will be triggered.
regards,
Arvind.

Data Loading is in Yellow Status

Hi All,
I have scheduled the data using info package.I have Checked in RSMO and after long time, the job is in the yellow status. I have checked the job in SM37 in R/3 side and found the status as "Released".
And data is not pulling into BW.
Can you provide how to rectify this.
Thanks,
Siva.

Hi there,
Your job is stucked on the R/3 side (probably no more process available on R/3 side).
Normally I could "force" that job, but I don't actually remember all of the steps.
Try this:
go to sm37 and for that particular job that is in the released state, select it and in the Menu choose Job->Released->Schedule
This will start your job, if not, you can still find it in sm37 with the status "Schedule". Select it again and choose Release. This will or start your job immediatly or prompt to when you want to start your job. Select immediatly and this will start your job.
Diogo.

PSA load remains in yellow status.

Hi Gurus,
I have created a generic datasource based on function module.
I have replicated the datasource in SAP BI dev instance.
I have even checked the extractor checker in R/3 and it shows 381 records.
On BI side I am loading data upto PSA.When I execute the infopackage for full load in the monitor screen I could see
"381 out of 0 records".The request remains in yellow status.
The idoc status in source system side is 03 and on BI side is 53.
I dont get any error message.Even I am not seeing idocs with red status in SM58 tcode.No logs are seen in sm21.
I even asked the basis team to check for RFC connection SM59 and partner profile.Every thing looks fine .
This loading issue is only happening with this specific datasource(ie datasource created on function module).
For other datasources load are carried out fine.
Has anybody faced a similar issue?.Please help in this regard.

seems the load is hung bcoz of thehung IDOCs.
Process the idocs manually. after
check the below things
--> Check weather the source system job finished or not?
If the job is finished check the TRFCs are processed or not?
In the monitor screen - menu bar --environment -->job overview (to check the job) -->TRFcs - to check the TRFCs.
Check for short dumps using transaction ST22.
-->Check for the Idocs in BD87 and if there are any IDOCs got stuck process them manually.
To process Idocs first change the status of request to red and try to process them in the background.

Process chain load failure

Hi experts,
A delta process chain which schedules the data to a dso
through infopackge daily failed.
Load was unsuccesfull.
The error message is:
Transfer (IDocs and TRFC): Errors occurred
Data Package 000001 : sent, not arrived
Info IDoc 3 : sent, not arrived ; Data passed to port OK
Info IDoc 4 : sent, not arrived ; Data passed to port OK
How to rectify this error.
And also how to repeat a process chain for which the delta load was failed. This is first time i am handling a process chain.
Regards,
Bhadri M.

Hi......
Is it failing everyday.......no one has taken any action........I mean no one has rectify the failed previous failed loads......
Or you mean to say that...........first time it is failing.........then after repeating...it is getting successfull.........I think all the previous failed loads are already rectified........check the log..........
Actually this error means TRFC are stucked.........check in SM58...........may be everyday it is due to the same issue since.....at this particular point of time.........no of jobs is huge.......due to which system performance is getting effected......and TRFC is getting stucked.............
If all the previous loads are already rectified.............then for today's load..........delete the request from the target after making the QM status red...........then repeat the load from IP scheduler............
But as per my knowledge..........previous loads are rectified.........otherwise next delta load will not star.........it will give a pop up Last delta was incorrect...........
Hope this helps.........
Regards,
Debjani........

Process Types in Process Chains - Loading - Repeatable/repairable

Hi,
I know SAP recommends that we do not change the properties of the Process Types for Process Chains. I want to know if any one has ever changed the property of "LOADING" process type to "repeatable" or "repairable". We are keen to change this attribute of "LOADING" process to repeatable. Any experiences, good or bad, would be highly useful to us to take a decision and would be highly appreciated.
regards
Uday

Hi Simon,
So far, I have not come across any documents that explain the difference between the two options. But, I believe the 'repairable" would start from where it has stopped in the program calles, while "repeatable" will restart the current job (not the whole process chain) from the start. Please remember to post it here, if you ever come across any documentation on these options.
Uday

Process Chain - Decision Step - 1st Day of Month

Hi All,
I have a process chain decision that detemines if it is 1st of Month,
1st Line
Command -> IF
Formula -> WORKINGDAY_MONTH( Current Date, 'IE', '' ) = 1
then
Event - > Option 1
2nd Line
Command -> Else IF
Formula -> WORKINGDAY_MONTH( Current Date, 'IE', '' ) <>1
then
Event -> Option 2
3rd Line
Command -> Else
then
Error.
However, this month it has failed to work correctly. It was sucessful on 1st Jan, but it is also triggering Option 1 on 2nd, 3rd & 4th Jan. Can you help me to understand why it is doing this?
Thanking you,
Michelle

Thank you Npathak,
The process chains should run everyday therefore I don't understand how this would affect the process chain.
This is just a decision step at the end of the Daily Meta Chain, where if it is the 1st of the Month, it will continue and process a DTP for Stock Balances. The problem I have is that for the last 3 days, it has continued to process final step eventhough it is not 1st of Month.
For info; When I check the decision logic in the variant, I can see that the date that is being used in syst-datum.
Have you any other ideas?
Thank you,
Michelle

Process chain detailed step procedure

dear all,
i want detailed step procedure or tutorial about process chain for beginners. i need help.
with regards,
satish.

Hi,
Please search the forum before posting :
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/502b2998-1017-2d10-1c8a-a57a35d52bc8
-Vikram

How to improve the process chain loading time

hi gurus,
one process chian having start - loading - roll up (3activities) but the load is data mart load which is going to update 11further targets. this take 1hrs. we want reduce this load. pl give ideas about reducing process chain time. (there are no indexing in the chain)

delete index and re-create after loading will surely improve loading performance but only it is only applicable if you do not compress the data , because if you compress the data will be available in E fact table.
Check the tranfer and update rules, if you have routines that read tables, check those statements and see if they can be still more optimized.
In the infopackage see ifyou have load PSA and then in to data target , if so check if there is any possibility of changing to load both in parallel.
hope it is clear
assign points if useful

Process chain load error

HI Experts,
We have process chain in that somany proceses are running i got error at one of the load process which is in the middile..what sghal i do now.suggestions please

What error it is showing?

Process chain load not triggered automatically

Dear Experts,
I have created a process chain which goes like
Start >> Create Index >> Load Infopackage 1 >> Load 2 >> Load 3 >> followed by 3 more load infopackages...followed by Delete Index and subsequent process like Rollup and DB stats.All the infopackages loaded into same data target.
When the chain gets triggered first Load infopackage is succesfull later subsequent jobs did not trigger.
But if i Right click on next process and click "Repeat" the job starts and load gets succesfull. The same case with rest of the loads.
why arent they getting triggered automatically one after other.
is there any solution to the problem ?
Thanks in Advance
EDA

Hi Ellora,
   In your scenario, I strongly suggets you to use the "Delete Index" only once since the data target is the same for all Infopackages. Again use "Create Index" only use. You can accomplish this by using the AND process greatly.
   The flow may be like this...
                     START
                   DELETE INDEX
                  LOAD1     LOAD2   LOAD3
                      AND
                       |
                     CREATE INDEX
Ensure that you have scheduled the process chain in the START Variant.
Hope this helps...
Thanks,
Raj

Process Chain load step in yellow status

Similar Messages

Maybe you are looking for