Process Chain name Chage

Hi All,
I am trying to find out a way to change the technical name of my Process Chain. I didn't find any option for deletion too. Can any one of you advise on this. Thank You.

Hello Troy,
I don't think you can change the technical name of a process chain. Copy the existing process chain into a new one and delete the old one.
Copy process chain
Transaction RSPC -> Double click on process chain-> type "COPY" in transaction area
Delete Process chain
Transaction RSPC -> Double click on process chain-> Shift-F2 ( or from menu -> Process chain -> Delete).
Regards,
Praveen

Similar Messages

  • Process chain name required for a infopackage

    Hi,
    Is there a table in BW that stores the process chain name and IP's in it. We need to find the names of process chains based on the Info package names.
    Regards,
    Adarsh Mhatre

    Hi Adarsh
    Check these tables
    Tables for Process Chain logs
    RSEVENTHEAD -
    Header for the event chain
    RSEVENTHEADT -
    Header for the event chain
    RSPCCHAIN----
    Process chain details
    RSPCCHAINATTR------- Attributes for a Process Chain
    RSPCCHAINEVENTS------- Multiple Events with Process Chains
    RSPCCHAINT----
    Texts for Chain
    RSPCPROCESSLOG----
    Logs for the Chain Runs
    RSPCRUNVARIABLES----
    Variables for Process Chains for Runtime
    RSPC_MONITOR----
    Monitor individual process chains
    Regards
    Jagadish

  • How to get the process chain name if we know the data target in sap bi

    Hi SAP BI Gurus,
    Can any help me how to find the process chain name if we know the data target name
    i mean if i know the info cube name how to find the relavant process chain which is holding that info cube
    Thanks,
    Joe

    Hi R Kumar,
    Check the table RSPCCHAIN.
    I mean, Use Table RSPCCHAIN and give the local chain tech name in VARIANTE field and search, in out put you will get meta chain name under the field CHAIN_ID.
    Thanks,
    Sreehari.

  • Process chain names

    HI
    I hav doubts about process chains.Can u tell me some process chain names??How many process chains wil run per day in supporting project??Can u explain detaily??
    Thanks & Regards
    Senthil

    Hi,
    I am not clear with Process chain Names???
    There will be process chains Like local process chain and Meta chain.
    Process chains for M.Data, T.data etc.,
    How many process chains:- that depends upon the project . normally process chains are used for data loads, so it depends on data also....we have 60 process chains entire for our project.
    Hope this helps

  • Process chain Name (description)

    when i have transported my existing PC (added few processes at the end) from DEV to Q, the PC name (disappeared) in both DEV and Q. How this could happen ? the Technical name (object name) is there on rt side, but the desc is missing.
    Secondly, the processes shows me all the details in the chain display itself. (like cube name, variant name, etc.. which otherwise should have been hiding)
    Can you pls help me ?
    thx
    venkat

    Hi Venkat,
    create a Display component fo your pc or save it in an existing Display component .....
    PC->Attribures->Display component ....then save & refresh
    The pc name & description should appear if its active...
    Regards,
    Chandan

  • Server name message when triggering process chain through ABAP PROGRAM

    Hi all,
    When I am trying to execute one process chain with variant as a APD ( In this APD data is getting loaded form one Query to Transactional ODS.) This process chainis being executing through one ABAP program using the following code
    CALL FUNCTION 'RSPC_API_CHAIN_SCHEDULE'
         EXPORTING
           I_CHAIN      =  'XYZ'. ( Dummy Process chain name)
    While executing this program I am getting following message :
    You can specify the name of the application server here
    on which all jobs in the chain are scheduled
    If you do not specify a name, the jobs from batch
    management are divided between the available servers
    How to avoid this message.
    Can we write any code in the above program to assign any fixed server name so that it will not ask for any server name.
    Your help is much appreciated.
    Thanks,
    Uday.

    Hi Shanthi,
    How to write exception handling for this.
    Quick reply is nedeed.
    Thanks,
    Uday.

  • Help me to Create this Process Chain

    Hi Gurus,
    We have 3 Process chains,
    1) Region 1
    2) Region 2
    3) Region 3
    These three process chains were start at differt times and end time will depends upon the load of data. Now i want to do some manual calculations after the successful execution of this chains. So i have written three ABAP programs to do that calculations for 3 chains.
    My scenerio is to create a new chain only so I have created a new chain with Start variant -> Decision variant -> 3 Program variants (For 3 chains)
    Now i want to write the condition in decision variant to attach the respective program variants below it. ie,
    Start -> Decision (Condition for successful execution of Chain Region 1) -> Program Variant 1
                 Decision (Condition for successful execution of Chain Region 2) -> Program Variant 2
                 Decision (Condition for successful execution of Chain Region 3) -> Program Variant 3
    So i don know what exact logic to write in Decision variant...Please help me here...
    Thanks & Regards,
    Balaji.S
    Edited by: sbalajigupta85 on Aug 26, 2010 7:47 AM

    HAI ,
    A process chain is a sequence of processes that are scheduled to wait in the background for an event. Some of these processes trigger a separate event that can, in turn, start other processes. It looks similar to a flow chart. You define the list of Infopackages / DTPs that is needed to load the data, say delta or Full load. Then you schedule the Process chain as hourly, daily, monthly, etc, depending on the requirement 
    process chains for which info providers ?? i mean to say... for cube or? DSO?
    ok now below i explained for DSO... try it out it will work.. 100%
    Step 1: Go to RSPC transaction. Click on Create. Give Process chain name and Description.  
    Step 2:  Give the Start process name and description and click on Enter  
    Note: Each process chain should start with a Start Process  
    Step 3: The next screen will show the Scheduling options.  
    There are two options:
    Direct Scheduling:
    Start Using Meta Chain or API  
    In my example I have chosen Direct Scheduling as I am processing only one chain i.e DSO. Click on u201CChange Selectionsu201D  
    In the below screen shot, you can give the scheduling details i.e the Immediate, Date& time etc. and click on SAVE  
    The Screen shot below indicates that we have started the process. 
    Step 4:
    Click on the icon process types as shown in the below figure. You will get a list of options.
    In my example I am scheduling for DSO. To process we need to have InfoPackage, DTPu2019s for the corresponding DSO
    Open the tree Load Process and Post Processing, We need to drag and drop u201CExecute InfoPackageu201D  
    Step 5: Once you drag and drop the u201CExecute infopackageu201D we get the below Popup. We need to keyin the Infopackage name. To do this click on F4 and chose your Infopackage and click on ENTER
    Step 6: Save + Activate and Execute the Process.

  • Monitoring BI PROCESS CHAIN with Solution Manager BPMON

    Hello,
    I'm trying to setup the monitoring of BI process chain using the BPMON
    I setup the process chain monitoring using  BPmon application monitoring "BI Process Chain Monitoring" (BOBIPCMO)
    but than I'm not able to read the process chain names,steps,and variant from satellite system
    On other systems,using different application monitor (like PI MONITOR) is working fine
    i'm using the latest plug-in ST-A/PI 01L_BCO700 on entire landscape
    My bi system is 7.01 EHP1 sp4
    solution Manager is 7.01 EHP1 SP20
    Any suggestiions?
    Thanks
    Marco

    Hello Marco,
    the problem is that the Process Chain monitor is not yet available with ST-A/PI 01L*. Unfortunately the empty hull that you see during the setup was shipped without the proper content. The Process Chain monitor will be properly shipped with the next ST-PI and ST-A/PI combination in Q2/2010.
    Sorry for any inconvenience caused.
    If you want to have this monitor earlier on it could be implemented via Customer Exit in case that you have some MaxAttention or Safeguarding engagement.
    Best Regards
    Volker

  • How to stop/cancel Process Chain in BI 7.0

    Hi,
    Could you tell me how to stop/cancel a process chain that hangs with status yellow or green in BI 7.0? There was an easy option to do it in 3.x, but I cannot find a similar option in 7.0.
    What happens is that at random our process chains hang at a certain variant with either yellow or even green status and do not proceed further. What happens is that in a couple of hours another pchain run occurs and it executes fine. Then again at random (might be the same day or the next day) the process chain hangs again. I think that all those "hanged" pchains pile up in the queue, so that it cause other future pchains to hang as well at some point. So, is there anyway to stop/cancel these zombie process chains when it stops at a particular event RSPROCESS in BI 7?
    Thank you,
    AG
    Message was edited by:
            AG

    Hi Frank,
    Thanks for your reply. I have a few questions.
    1)SM37 -->Kill Job
    We cannot do that because the job has already finished.
    2)SM50/sm66- ->Kill process
    There are no hanged processes to kill
    3)RSPC>Job Log>Make the process RED forecefully
    How do you do that exactly?
    4)RSPC>Process chain> main Menu"Remove from Scheduling"  OR
    5)se37-->RSPC_API_CHAIN_INTERRUPT
    give RFC BW system name(technical) and process chain name(technical) - we can do this,  but what exactly would it accomplish. Would it remove the process chain from any runs in the future or also any hanged ones in the past? An how is this step different from #4?
    Thank you,
    AG

  • Trigger process chain in ABAP program

    Hi Experts,
    We have a requirement to trigger the process chain from an ABAP program. I used the function module RSPC_API_CHAIN_START to trigger the process by passing the process chain name in 'I_CHAIN' and it worked. However, the client wants to trigger this using batch user name as few planners do not have authorization when they executed the custom transaction.
    Based on the return code of the function module I am capturing the status for tracking.
    Please suggest if there is any alternate solution to pass the user name while triggering a process chain in an abap program.
    Thanks and Regards,
    Pavithra

    hi Chintai,
    in bw side, you create a abap program to trigger an event in r/3,
    and include this abap program in your process chain, the abap program like
    CALL FUNCTION 'BP_EVENT_RAISE'
    EXPORTING
    eventid = 'ZRUNJOB_DEL'
    and in r/3 schedule the program to delete previous data with 'after event',
    the event name is same as raise by bw process chain, in this sample ZRUNJOB_DEL.
    hope this helps.

  • How to stop process chain, if it is taking too much time than expected.

    Some times if a process chain takes to much time to finish than expected, how I can stop the process chain and execute it again.
    Thanks in Advance.
    Harman

    how I can stop the process chain ??
    If the job is running for a long time ,
    1)GOTO RSMO and SM37 and check the long running job over there.
    2)There you can see the status of the job.
    3)If the job is still running you can kill that job
    4)delete the failed request from data target.
    for more details go to this below link
    how to stop process chain if it yellow for long time
    how I can execute it again ?
    GOto Function module  RSPC_API_CHAIN_START
    and give u r process chain name there.and execute.

  • Step by Step method to create a process chain in SAP BI

    HI There,
    I'm new to SAP BI, can anyone pleas explain me why we need to use Process Chains in a simpler way?
    Also it would be great if someone can give me step by step description for creating process chain. I've seen couple of PDF files but they confusing me more then clearing my doubts. Appreciate your time and thanks in advance.
    Vandana
    Please search the forum before posting a thread
    Edited by: Pravender on May 4, 2011 3:57 PM

    Hi Vandana,
    1.Go to RSPC tcode ->(F5) create ->It will ask for process chain name ->then it will ask for start variant
    2.If you have no start variant pre created then create new one (at right side there will be a paper symbol for that ).Every process chain has one and only one start variant that is to set scheduling option etc .When you will create a new one you will go to a screen where you have scheduling option .
    3.a) Direct scheduling ->to start execution immediately 
       b) start using meta chain or API ->chains which run at specific time (day ,month etc or after some specific event ). save your settings and go back .click check symbol for final creation of start variant.
    4.Now at left screen you  have chain symbol (process types) .when you will click on that you will have all the process lists .
    5.You can select process as per your requirement and connect different processes together.Each process is a different event (ex : load DTP ,Infopackage ,ABAP program ,AND ,Interrupt ).You cna do detailed study for that .
    6.After adding all processes activate (ctrl+F3) and execute .
    7.After that you can check logs (shift+F1) .you can see todays log ,yesterday and today etc .For details of every process execution right click on process and see display variant .
    Hope this will be helpful for basic startup.you can further read thoroughly on each process .
    Regards,
    Jaya

  • ABAP Program Termination in Process Chain

    Hello
    in my process chains i have one abap program and it is getting dump while loading.
    where can i check whether this program got terminated in this particular chain.
    as i have many chains i am not able to check in each and every chain.
    kindly let me know where to check the program termination in process chains.
    do i have any chance to set an automatic process for checking the termination of the program.
    regards,
    Ala.

    Hi Ala,
    If u know the process chain name, u can directly see log view of that process chain and right click on that failed ABAP program click "display mesaged". Now note down the error message and see that in st22.
    If u dont know the process chain name..
    In SM37 go to the job log for that pirticular job which is failed, it gives u tha program name and varient name.
    now goto SE38 and give that program name and variant then click on display.It gives u process chain name.
    Hope it helps.

  • Process chain to trigger automatically after file arrives in AL11.

    Hi All,
    There is a text file(.txt) which comes from mainframes team every Sunday between 11 AM to 6 PM and gets placed in AL11 inbound directory following which we manually trigger a process chain which uses this file.
    The requirement is that this chain should trigger automatically after the file arrives in AL11 in BW.
    Is it necessary for the mainframe team to send another control file or some other file in addition to the text file to trigger this process chain..?
    Is there any other way the process chain can be triggered in BW without any changes required from the mainframe team.
    Additional information:
    Also I came to know that this can happen through some system command statements using SM49 we can schedule this chain.
    Else can some ABAP Program code be used to make this process automatic?
    Please help me.

    Hi,
    You can do the following, in your process chain change the start variant and make it event dependent. Now you can do the following,
    1) Create a table in SE11 which will have fields like Process chain name and execution date as primary fields. This table will be used further for checking purpose.
    2) Now create a ABAP program as shown in below given article, in this program in addition to raising an event you will have to read the file from app server.
    3) If program can read file from app server means you will raise an event and make entry in above table for preventing further execution of process chain. If program can't read file from app server then program will simply end without doing anything.
    4) Now you can schedule this program after every hour or 30 min. as per your requirement, the program will first check if the process chain execution entry exists in the above 'Z' table or not. If entry exists means the process chain has been already executed and the program will be terminated.
    5) You can use FM to read data from app server. You need to be careful while placing file on app server, because it has to be different naming convention or something else to identify that the current day file is available.
    [http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a01cc44a-5aac-2d10-3eaa-a3bbf645d25c?QuickLink=index&overridelayout=true]
    Regards,
    Durgesh.

  • Trigger a process chain(PC) after successfull completion of two other PCs

    Hi All,
    My requirement is to trigger a Process Chain only after successfull completion of two other process chain which are already scheduled to run at different times.
    Please tell me how to achieve this into SAP-BW 3.5
    Thanks
    Jharna

    Hi
    It is very simple, I'm doing the same.
    Insert Remote Process Chain at the end of the actual process chain and call the other process chain, here you need to give source , destination and process chain name in Remote process chain.
    try it, it will work.
    Thanks
    Reddy

Maybe you are looking for