Process chain not loaded today and yesterday

Hello all,
I scheduled PC daily, but today i realized that PC is not loaded today and yesterday.
how can i analyze further for missing today and yesterday load.
Regards,
Ranga

Check in sm37 if you process chain was triggered or not. If it was triggered, whether it finished successfully or not.
If everything looks fine here, go to WE02 in your source system to check if any idocs have failed. If the idocs are posted succussfully, check in sm37 here if you job for dataload got completed succesfully or not.

Similar Messages

I am having problems with my email sent folder. Most of the emails will not load. Todays and yesterdays emails will load.

I am having problems with my email sent folder. Most of the emails will not load. Todays and yesterdays emails will load.
Thanks
Zambam

You can check for problems with current Flash plugin versions and try these:
*disable a possible RealPlayer Browser Record Plugin extension for Firefox and update the RealPlayer if installed
*disable protected mode in the Flash plugin (Flash 11.3+ on Windows Vista and later)
*disable hardware acceleration in the Flash plugin
*http://kb.mozillazine.org/Flash#Troubleshooting
Clear the cache and the cookies from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Process chains for loading data to target is not functioning

Hi SAPians,
Recently, we have upgraded the firmware on IBM P590 with the help of IBM on Saturday i.e. 06/12/2008 (The firmware of P5-590 was SF235_209. It was upgraded to SF240_XXX) and since then the process chains for loading data to targets are not functioning properly. We have stopped all the SAP services, database services & OS services from our end and services have been rebooted after firmware upgrade.
However, the problem with the process chains that load transaction data and hierarchies is solved but the chains that load master data are still not working as scheduled.
We tried to load the master data manually, by running DTP to load data to an object analysis code (attributes) the request remained YELLOW. After refreshing it several times, the request turned into RED. The error message was - PROCESSING TERMINATED (screenshot 1 attached).
To mitigate this we tried deleting the bad request and it prompted with the below message:
"Cannot lock request DTPR_4C37TCZGDUDX1PXL38LVD9CLJ of table ZANLYSIS for deletion (Message no. RSMPC178)" (screenshot 2 attached)
Please advise us how the bad request should be deleted?
Regards,
Soujanya

Hi Sowjanya,
Follow the below procedure to make yellow request to RED:
Use SE37, to execute the function module RSBM_GUI_CHANGE_USTATE
From the next screen, for I_REQUID enter that request ID and execute.
From the next screen, select 'Status Erroneous' radiobutton and continue.
This Function Module, change the status of request from Green / Yellow to RED.
Once it is RED, you can manually delete that request...
Releasing LocK
Gott Transaction Code SM12 and release the lock.
Hope It helps you.
Regardss,
Nagaraju.V

Mail 4.5 not showing any dates other than "Today" and "Yesterday"

All of my mail messages are dates 5-01-13 except thos that are "Yesterday" ort "today. The settings in my System Preferences are correct and all other programs are O.K. Only mail seems to be the problem. Any ideas?
Sass

Hi there,
I'm also having this exact problem. I have Mail 6.6 running on Macbook air 11" OS X 10.8.
All the emails apart from today and yesterdays show the date as 05-01-2013 in the top right hand corner of the mail window scroll list, i.e. date in blue. Only when you click on a specific email to show the whole conversation/message does it then show the correct date and time in the top right hand corner of the message window.
Any ideas anyone?? So annoying when trying to search for emails!
Cheers,
Prina

How do I increase the length of my browsing history; all I get is today and yesterday and I want to go back 100 days.

When I go to History: Show all History all I have is today and yesterday, but I want to see the sites that I was on a week or even a month ago (I realize that this may slow things down a bit, but it is a price that I am prepared to pay)

The setting for a specific number of days to save History was removed from Firefox several versions ago. Why? Too much History was slowing the loading time for Firefox and sometimes making Firefox sluggish.
Current versions '''''automatically''''' determine how much History to save based on your system's resources (RAM, etc.). It is a complex algorithm, and though I have seen some try to experiment with a few settings, the results were generally not very successful.
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You need to update some plug-ins:
*Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]

Firefox opens but no content is shown, url says the website but the tab does not load up and says '(untitled)'. how can i fix this?

firefox opens but no content is shown, url says the website but the tab does not load up and says 'untitle'. how can i fix this?
== This happened ==
Every time Firefox opened
== after norton asked me to restart my laptop. ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; GTB6.5; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; eSobiSubscriber 2.0.4.16; .NET4.0C)

Hi,
Unfortunately we had a data base error today and lost some user accounts when we had to go back to our backups. If you have started this thread, your's is one of those. Since we can not recreate your account, please sign-up for a new account here to reply to the forum messages:
https://support.mozilla.org/users/auth
You can use the same username and email address as before. We are very sorry for the inconvenience.

Process chain not continue after successful node

Hi gurus,
   In my process chain I load data from R/3 to PSA and then execute DTP to DSO, all actions are serially. Usually our PC is running well. But recently the PC will stop after the loading to PSA was successfully end , which means in the log view of PC this node was green.
   I have checked the table RSPCPROCESSLOG, the entry here was also marked as successful. ( STATE = G )
   I have no idea why this PC wouldn't continue automatically?
Regards,
Aaron

Hi Ashok,
We have tried manually execute DTP to load data from PSA into DSO. Everything is OK. And as I mentioned, this PC was OK before! Sometimes when execute the failed PC several times, it runs correctly.
   This is why it looks so weird! I guess is it related to time exceed (load to PSA cost 2 hours) or some potential restrictions?
Regards,
Aaron

Problem in Process chain data loading

Hi Experts,
We have a Process chain in which the lists of jobs are as follows.
1) BI_TRIGGER_PROCESS
2) BI_PROCESS_LOADING
3) BI_PROCESS_ODSACTIVAT
4) BI_PROCESS_DROPINDEX
5) BI_PROCESS_LOADING
6) BI_PROCESS_INDEX
7) BI_PROCESS_ABAP
These jobs trigger the PC and load the data to ODS, activate and delete the index for cube and load data to cube and create the index and then delete the file from the FTP.
The problem is that the Initial job (BI_TRIGGER_PROCESS) is being repeating multiple times because of which the loading is taking place for the same file repeatedly to ODS. one day it was happend repeatedly for 130 times. This is being happening on a randomly basis. We are unable to figure it out the where the problem is. Can anybody help in this regard?
Thanks.

Hi Rama,
Following is my understanding of problem.
You have Following steps in process chain
1) BI_TRIGGER_PROCESS
2) BI_PROCESS_LOADING
3) BI_PROCESS_ODSACTIVAT
4) BI_PROCESS_DROPINDEX
5) BI_PROCESS_LOADING
6) BI_PROCESS_INDEX
7) BI_PROCESS_ABAP
Some times only first two steps repeat multiple times i.e
1) BI_TRIGGER_PROCESS
2) BI_PROCESS_LOADING
In such case you should see the log from process chain log view.
I believe you should take your process chain out of schedule and reschedule it.
Also check whether somebody has scheduled the inopackage.
Regards,
Ajinkya

STO3N doesn't shoe today and yesterday stat ???

Hi Gurus,
In BI 7.0, STO3n tocde statistics for today and yesterdays are not displayed.
When i click it says that no data available.
Regards
Suresh

Hai,
Check the below link.....
http://help.sap.com/saphelp_nw04s/helpdata/en/2d/b8be3befaefc75e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/c1/0dbf62e04311d286d6006008b32e84/frameset.htm
Hope this helps.
Regards,
Yoganand.V

The history only stores today and yesterday

I have a problem with history, It only stores today and yesterday in the history.
In preferences I have "remember history".

Since you have deleted places.sqlite completely and Firefox is creating a new one, it's hard to imagine repeated database corruption.
To rule out a potential problem in Firefox's program folders, I suggest the following:
(1) If needed, download a fresh installer for Firefox 30 from https://www.mozilla.org/firefox/all/ to a convenient location. (Scroll down to your preferred language.)
(2) Exit out of Firefox.
(3) Rename the folder
C:\Program Files\Mozilla Firefox
to
C:\Program Files\OldFirefox
(4) Run the installer you downloaded in #1. It should automatically connect to your existing settings.
The new installation of Firefox should discover your existing profile. Does it read places.sqlite correctly?
Note: Some plugins may exist only in that OldFirefox folder. If something essential is missing, look in these folders:
* C:\Program Files\OldFirefox\Plugins
* C:\Program Files\OldFirefox\browser\plugins

Email Drafts in Mavericks using Today and Yesterday

I have email DRAFTS folder set up so the most recent DATE Saved Draft is on top. This was working perfectly until a couple weeks ago.
Today is 7/2/14. The DATE for a draft from yesterday should be "7/1/14" and instead it is listed as YESTERDAY.
A DRAFT from today should be 7/2/14 and instead it is listed as TODAY.
I have 50 drafts in DRAFTS (don't yell - it works for me).
I thought I was losing drafts and have been REDOING work that I thought was lost !!!
Drafts that Mavericks mail marks as TODAY and YESTERDAY, appear WAY DOWN in the my Chrono list - not at the TOP where they belong and where they used to be when they had REAL DATES and not word names: TODAY and YESTERDAY.
I now know the work is NOT lost and how to find it. Can someone pls restore REAL Chrono Date Order to DRAFTS? Thank you!!
PS: a similar issue is occurring in FINDER... where CHRONO is no longer CHRONO due to WORDS where DATES belong.

I used to export my old messages using a smart mailbox as my corporate account also has a size limitation.
Upgrading to Mail 7.0 broke exporting of smart mailboxes. I was using a workaround to archive the mail and then export the Archive mailbox instead which worked.
With the latest update to build 1822, archiving of Exchange messages appears broken as well. Smart mailbox exporting still broken too.
I modified my workaround as follows:
1. Create a mailbox under "On My Mac" called Archive.
2. Select all messages in my smart mailbox.
3. Drag the messages to the On My Mac folder under Archive as created in step 1 above.
4. Highlight the On My Mac Folder under Archive.
5. Choose Mailbox, then Export Mailbox and browse to a folder where you want the mbox file created and choose the folder.
Next time you just follow steps 2 through 5 of course.
Seems like the long way around to me and I'm annoyed that I have to keep changing my workaround as Apple breaks features in their mail program.
Hope this helps.

Regading Process chains data load monitoring

Hi All,
In my current project, I need to monitor process chains. I am kind of new to this environment as I had not done this before. My tasks are as follows.
1. Process chains are scheduled for a periodic job for every on hour starting at 6 a.m and ending at 12 a.m. After that I need to stop the chain and reschedule it for next day at 6 a.m. How do I do that?
2. Also if a delta process chain fails in one of the processes, I need to stop the chain before the next delta run starts filling the cube. How do I do that?
Also how to see why the process failed?
Please do respond.
Thanks in advance.

You can stop your process chain in SM37 tcode. Just select the schedules processes, and here you can see your process chain, just select it, and cancel it for next release.
You can restart it, just by clicking on Execute button. Before executing PC, just cross check by right clicking process chain, and go to change selection option of maiantain variant of start variant. And see if process chain schedule option is starting at 6A.M. or not, and also check it is selected as period job of ` hour or not.
You can see log of process chain by right clicking it, and checking the message. It depends on what option for next process is you selected, like if your next variant connected to failed variant is selected as only if success, then you don;t need to stop ot. It will automatically not go to next process. or right click and you can select stop.
By right clicking on failed process you can see the logs in details.

I was using my notes earlier today and now for some reason they are all gone. How does this happen and is there anything I can do to get them back, the new ones also that haven't been synced.

I was using my notes earlier today and now for some reason they are all gone. How does this happen and is there anything I can do to get them back, the new ones also that haven't been synced.

See Recover your iTunes library from your iPod or iOS device.
tt2

Facebook is not loading properly and all my text and images are lined up along the right side of the page. How can this get fixed to the way it use to be?

Facebook is not loading properly and all my text and images are lined up along the right side of the page. How can this get fixed to the way it use to look?
Everyone who logs into Facebook on my Firefox has this problem however if we use Internet Explorer - facebook looks normal.

If you have increased the minimum font size then try the default setting "none" as a high value can cause issues like you described.
* Tools > Options > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
*Tools > Options > Content : Fonts & Colors > Advanced > [X] "Allow pages to choose their own fonts, instead of my selections above"

ITunes Store will not load properly and returns too homepage in seconds

iTunes Store will not load properly and returns too homepage in seconds what do I do too fix it

I am having the same problem now, did you ever find a way to fix it?

Process chain not loaded today and yesterday

Similar Messages

Maybe you are looking for