Process Chain problem related to Update ODS Object Data (Further Update)

In the process chain, the data is loaded to an ODS first then feed to an InfoCube by kind of data mart load. But when checking the process chain, getting yellow warning msg:
A type "Update ODS Object Data (Further Update)" process has to follow process "Activate ODS Object Data" var.our_infopackage_name in the chain
Message no. RSMPC016
If we add the variant "Update ODS Object Data (Further Update) after the activation of the ODS and before the InfoPackage to feed data to the cube, then another yellow warning shows up for the InfoPackage of loading data to the InfoCube that says the Update variant can not be before the loading to this Cube and etc.
What should we do to have the problem resolved?
Thanks

hey Dinesh,
How to have a wait time for the load to the cube?
I've given you "Very helpful" rewarding points and after you give the answer to the above, I will give you the "Solve problem" rewarding points.
Thanks

Similar Messages

Process chains problems : Working every day with error (red)

Hi All,
I have a next question, about process chains problem.
When I start my process chains immediate, then working without errors, but I want this process chains work every day and chainged properties, selected date/time and periodicaly (every day) but now it work with error.
How to I find problems? What are yours offers?
p.s. I see logs, but every day have diffence between errors.
Regards,
Mahir M. Quluzade

HI,
just check the time which you have given is OK or is overlappintg with some other job which is locking your table in process chain
or is colliding with attribute change run
or it fails because of lack of background processes.
There could be numerious reasons and you need to analyze the log for this.
But as you said the job is failing everday for different reasons..try to find the most common errors and try to remove it or mention that here.
Thanks
Ajeet

Process chain problems

Hi guys
yesterday I got problem with process chain(PC),....its master data loading into characteristic attribute with everyday deltas.....
I have three infopackages
1.first IP for deltas(used in process chain)
2.second IP for full repair
3.third IP for delta initialisation.
Process chain(having IP for deltas) stopped yesterday and the errors are:
Repeat delta mode not supported by extraction API
pROBLEM in source system
I got advice yesterday...to solve this problem like this
1.check if your failed delta request has any records...if it donot have any...go to IP for initialisation and do Delta initialisation without datatransfer.....if failed delta request has any data....then do delta initialisation with data transfer.
2.Select repeat in process chain.
Today...I checked delta queue...there are no records for my request...then went into IP for Initialisation and choose option 'Delta Initialisation without data transfer'....and tried to schedule it.....it shows message:
Delta Initialisation already done...cannot be done again....
how can I solve this problem.....
thanx for your inputs
NR

Hi.....
Today...I checked delta queue...there are no records for my request...then went into IP for Initialisation and choose option 'Delta Initialisation without data transfer'....and tried to schedule it.....it shows message:
Delta Initialisation already done...cannot be done again....
Your delta queue is showing 0 records......may be there is no new records.......whatever delta s was there you have already send it..............
Why you want to do re-init again..........I did'nt get you......
Anyways............before doing re-init...always you have to delete the init flag.........because init flag is like a pointer.........you are doing re-init means you are again setting the init flag...........when already init flag is set...........how can you set it again without deleting the previous one.............due to this you are getting this error message..........
Regards,
Debjani.......

Process Chain : Read PSA and Update Data Target in BI 7.0

Hello Experts,
In my Process Chain I have a variant Execute Infopackage to load the data only into PSA. then I have next variant as *Read PSA and Update Data Target*. my data target was a Master Data table Hierarchy
In the variant " Read PSA and Update Data Target". the selection Parameters were
PSA.Table : 0GLACCEXT_T011_HIER_BA1
Selection Object Type : same Infopackage in Varaint Execute Infopackage
the Error message was Variant doesnot contain a valid combination request/data target
I checked the PSA-Table using RSA1OLD Transaction then I find four PSA Tables:
0GLACCEXT_T011_HIER_BA1
0GLACCEXT_T011_HIER_BA2
0GLACCEXT_T011_HIER_BA3
0GLACCEXT_T011_HIER_BA4
All the requests are linked to PSA Table *0GLACCEXT_T011_HIER_BA4*.
I can't understand why there exists four PSA Tables?
I try to link the PSA-table 0GLACCEXT_T011_HIER_BA4 in the variant *Read PSA and Update Data Target and try to save it it raises short dump.
If I select 0GLACCEXT_T011_HIER_BA1 in the varaint I shouldn't face any problems.?
but the process chain raises an Error message Variant doesnot contain a valid combination request/data target with this variant.
How shall I handle this issue?
Please carify me the issues as soon as possible.
thanks in advance
Regards
sailekha

Hello,
In the Variant Read PSA and Update Data Target I have to select the PSA Tabelle Name from the preselection list in the System it shows me all the four PSA Tables that I mentioned.
I can select any one of them. So I trieed with all the four PSA Tables in the list but I can selct only the XXXX......BA1 table then only I can save and include it in the PC. If I select the remaining tables BA2, BA3, BA4.........while I try to save the Variant it raises short dump.
I checked the PSA using the Transaction RSA1OLD under PSA...... I find 4 PSA Tables( I don't know whether they are PSA Tables or not but in the Variant it states that they are PSA Tables) in which all the requests are attached to BA4. only.
I observed that ony for Hierarchies I find four PSA tables for remaining one only one PSA table was available.
I totally confused how to handle this situation. any suggestions......... please help me to resolve this problem.
Thanks & Regards

Process chain Problem "Process Activate DSO,ZDSO_01 has status with error"

hi,
i have found the problem of activation of ODS .
problem is something like
" Request REQU_49K5C78KK17M6JTUD3Y773YXC(3,860) has not or not correctly been updated; Please edit"
"Activation of M records from DataStore object ZDSO_01 terminated"
"Process Activate DataStore Object Data, variant Aktiviere Daten ZDSO_01 has status Ended with errors (instance ODSA_49K5E1DRU05C
Please reply me as soon as possible.

Hi Viral,
Delete ur requests and try to laod them again.
Try to find the detailed error message which u can find the process monitor --> Status page --> step by step analysis.
So that you can get more information regarding ur error.
Regards,
Rajkandula

Process chain problem...., its urgent

Hi all
in my process chain we are loading 4 loads into ODS. After 3 loads, 4th load didn't take place. its not yet started even 3rd one successfully ran. its not showing error also. what can i do. after 4th one ODS activation process is there.
Please advice me. will i go for manual loading. if i do manual, what abt activation after 4th load. will i do activation also manual or else it will trigger automatically as part of process chain........../
Advice me frnds..., its urgent
Regards
swetha

Hi Swetha,
Sometimes, it doesn't help to just set a request to green status in order to run the process chain from that step on to the end.
You need to set the failed request/step to green in the database as well as you need to raise the event that will force the process chain to run to the end from the next request/step on.
Therefore you need to open the messages of a failed step by right clicking on it and selecting 'display messages'.
In the opened popup click on the tab 'Chain'.
In a parallel session goto transaction se16 for table rspcprocesslog and display the entries with the following selections:
1. copy the variant from the popup to the variante of table rspcprocesslog
2. copy the instance from the popup to the instance of table rspcprocesslog
3. copy the start date from the popup to the batchdate of table rspcprocesslog
Press F8 to display the entries of table rspcprocesslog.
Now open another session and goto transaction se37. Enter RSPC_PROCESS_FINISH as the name of the function module and run the fm in test mode.
Now copy the entries of table rspcprocesslog to the input parameters of the function module like described as follows:
1. rspcprocesslog-log_id -> i_logid
2. rspcprocesslog-type -> i_type
3. rspcprocesslog-variante -> i_variant
4. rspcprocesslog-instance -> i_instance
5. enter 'G' for parameter i_state (sets the status to green).
Now press F8 to run the fm.
Now the actual process will be set to green and the following process in the chain will be started and the chain can run to the end.
Of course you can also set the state of a specific step in the chain to any other possible value like 'R' = ended with errors, 'F' = finished, 'X' = cancelled ....
Check out the value help on field rspcprocesslog-state in transaction se16 for the possible values.
Try this solution with your 3rd ODS..hope this will solve your problem for this instance. This is just a workaround.
Before next scheduel of the process chain..remove the link between 3rd ODS and 4th ODS and then reconnect once again and activate the process chain and schedule it as per your schedule cycle. From next upload onwards everything works fine.
Assign points if it is helpful.
Regards,
Sreedhar

Process Chains Problem

Hi,
Im facing a problem with the triggering to the Process Chains.
When Im creating a new process chain and scheduling it for immediate run using Activate & Schedule (F8) the chains fails to start.
In SM37 I can see the following status for
BI_PROCESS_TRIGGER in the job log:
Job started
Step 001 started (program RSPROCESS, variant XXXXX,
user ID ALEREMOTE)
The RSPROCESS variant is correct with WAIT = 0 & TYPE = TRIGGER
The status of BI_PROCESS_TRIGGER remains ACTIVE & it seems to continue to infinity. The process never seems to continue beyond this point.
This problem happens only to the newly built chains, existing chains in the system are working fine.
A similar problem exists with Meta chains.
Ive a existing chain to which Ive attached a new chain as Local Process Chain. The main chain is scheduled for immediate run & the local chain as Start using Meta Chain or API
When I run the main chain (F8) it executes fine but as it enters the local chain it seems to hang. (The other branches of the main chain run to completion).
SM37 shows the following status for the local chain:
BI_PROCESS_CHAIN as Active
BI_PROCESS_TRIGGER as Active (Job log shows 'Job Started' and no further info)
The Job log for BI_PROCESS_CHAIN shows the following:
Job started
Step 001 started (program RSPROCESS, variant &0000000007829, user ID ALEREMOTE)
Communication buffer deleted from previous run 3YD14KALESRSTNM5MHPQ9Z5OW (status X)
Version 'M' of chain SP_VENDOR_EVAL_INIT was saved without checking
Version 'A' of chain SP_VENDOR_EVAL_INIT was saved without checking
The Chain Was Removed From Scheduling
Program RSPROCESS successfully scheduled as job BI_PROCESS_DROPINDEX with ID 07460801
Program RSPROCESS successfully scheduled as job BI_PROCESS_INDEX with ID 07460801
Program RSPROCESS successfully scheduled as job BI_PROCESS_LOADING with ID 07460801
Program RSPROCESS successfully scheduled as job BI_PROCESS_LOADING with ID 07460901
Program RSPROCESS successfully scheduled as job BI_PROCESS_ODSACTIVAT with ID 07460901
Chain <local chain> Was Activated And Scheduled
(The <local chain> has variants for deleting & recreating InfoCube Indexes, loading data to Cube & ODS, and activating ODS )
It seems the Trigger process of the local chain never completes and so the local chain never runs.
Any help to solve this issue will be greatly appreciated. I closed & reopened the transaction & even logged out of saplogon & logged in again. But these steps dont seem to help much! Except that in my second case mentioned above the status in SM37 showed only BI_PROCESS_CHAIN as Active initially ( without the job BI_PROCESS_TRIGGER ) and after I did my logout & login the BI_PROCESS_TRIGGER seems to have started. But nothing more than that so far!!
Thanks in advance,
Melwyn

Hi All,
The problem is resolved by deleting the lock in SM37.
The following lock appears (and stays!) when the chain is triggered-
ALEREMOTE <time> E RSPCLOGCHA <chain name> #########################
The lock is released if you leave the RSPC transaction & the chain executes for a normal Process Chain.
In the case of meta chains (as explained by me earlier) this lock appears as the execution of the local chain begins BUT even if you leave RSPC the lock remains for the local chain.
In both these scenarios deletion of this lock kicks of the normal execution of the Process Chain.
Thanks everyone for your inputs.
Cheers,
Melwyn

Process chain problem

Hi friends,
in my process chain it is giving the following error(in display messages)though the data has been loaded and activated in my ods.
Full updates already available in DSO ZCRM_O01; Cannot update init./delta
actually we done a repair full request on full infopackage.
on the same ods we have init and delta info packages.
please suggest me how to handle it
sridath

Hi,
I think some full request are available in u data target, so in case of DSO, system not allows u to load deltas if already full load are there in case of DSO. So u first convert all the requests to repair full requests by using the report RSSM_SET_REPAIR_FULL_REQUEST_ALL in se38. Tehn run the init load with out data transfer and then start loading the deltas.
Hope this will helps u.........
Assigning points is the way of saying Thanks in SDN
Regards
Ramakrishna Kamurthy

Process chains problem in bi 7.0

Hi,
I am creating process chain loading cube , but iam unable to find out delete request in info cube.
finaly i found one option delete overlaping reuest in info cube is it correct?
please help me onthis.
Advance Thanks.

Hi suman,
Refer this link.
http://help.sap.com/saphelp_nw04/helpdata/en/f8/e5603801be792de10000009b38f842/frameset.htm
one small request when you find some problem then 1st just go for finding SAP Forums, there are lots of Forums available on this Topic. It will save your Time.
Regards,

Process chain problem - urgent

Hi
my process chain is got error at update from psa,it is showing yellow.
the data has loaded into the dsos but it is not activated
how can i activate it from process chain itself because if i do manually i have to do delete index,create index and compression all.
in more chain the process is strucked at AND process,it is not displaying any message only it is displaying variant.
in both of the above cases job was cancelled
kindly suggest me how to rectify this issues
Regards
sridath

hi,
what is QM status of the the request in the dso? is the settings in dso is made such that automatic qm status green?
force the qm status to green, and this might trigger the successive process in the chain.
is the successive process is activation of DSO? if no activation process is present, you include it for the next days chain in the planning view of the chain and activate it.
if any process is failed and AND procedd is not success and does not trigger the next process then force the AND process status to green using the function module RSPC_PROCESS_FINISH.
Ramesh

Process Chain Problem - RSPCPROCESSLOG

Hi,
we have just upgraded from BW3.5 to BI7(patch 11) and we are currently experiencing a sporadic problem when executing process chains.
In some loading chains, even though the previous infopackage has finished successfully, the next package does not start. The entries for the previous processes in table RSPCPROCESSLOG have field ACTUAL_STATE = 'F' (Completed), whereas normally the completed loads have status = 'G'. This causes our process chains to get stuck and we can waste quite a lot of loading time due to this.
Does anyone know why these (apparently) successful loads would be stored in RSPCPROCESSLOG with status = 'F'?
I noticed in another thread that there is a function module (RSPC_PROCESS_FINISH) which can change the status, but as our chains are not constantly monitored we can lose a considerable amount of time before this function module can be executed.
Also, I found OSS note 1002791 which looks relevant, although when I look at the correction instructions, it refers to TYPE = DTP_LOAD in table RSPCPROCESSLOG, whereas our problem is occurring with TYPE = 'LOADING', because we have not yet migrated from BW3.5 functionality.
Any suggestions would be greatfully received.
Thanks.
Trevor Cowan.

Really don't know about when the status gets set. Have to look at that a bit.
I do know that some changes were made in 7.0 to some things like change runs and I think other processes to use background processes instead of dialog. Not saying this is your problem, but still something to look at. Sometimes if you look at jobs in SM37 and if you see that you had jobs with delays before they actually started, that can suggest insufficent background processes.
Can you adjust your chains or timings so that not as many chains try to run at the same time or reduce the number of subchains that are triggered at the same time. There is an OSS Note that talks about how many background processes you need to have free for process chains to work proprely - try searching for that.

Process Chain - RSPC - related Abend

Hi All
I am using 2004s, nd when ever I tried to open any process chain I get an program termination with MESSAGE TYPE X. I created and executed process chain before. I am not even able to just open the same process chain I created before nor create a new one.
If anyone had come accross this error please advice. I need this to be solved quickly.
Thanks in Advance.
Alex.

Thanks Nilesh,
I recently updated my front-end. It is not a system wide issue. Other's in my team are able to access without any issues. I think your suggestion makes sense.
Thanks,
Alex.
(I will award points to all the answers close to my questions once I check them..)

Process chain error_ error in update programm

hi friends,
How to solve the update rule error in process chains.\ plz have step to step plz.
regards,
siddhu

Hi,
You know that the error is in Update rules, so goto that update ruls and check the error(See the complete error message in RSMO tcode for perticular infoPackage), correct it and reload once again manually.Don't distrub the settings while running the infopack manually.
Thanks
Reddy

Sp12 - process chain problem

hi,
we are on sp12, when I tested sp12, I found problem in process chain, when I create a new process chain and want to add a new infopackage to it, I cant find any infopackages thru the Execute InfoPackage process. Is there any solution for this problem, because I am not able to add any infopackage to process chain.
thanx

Hi,
While creating the process chain after the start process step, after selecting the Load step and drag down to the right side of the process chain screen then create the varient.
Click on the infource button which is left side of the RSPC transaction.In this select find button.through find button search with infosource or Infopackage then you will get Infopackage with delete index and create index step.select and drag to the right side of the window.
Hope your problem will work out.
Best regards,
srinivas

BI process chain problem

hi,
In BI, we are using process chain for uploading the data from CRM to BI. In process chain, when we are schedulling it at any point of time the job is not getting displayed in sm37 as well as the chain is not getting strarted at scheduled time. When we are manully triggering the process chain it is running fine. we have also checked the chain by checking view button and it is showing OK. Please look into the matter and suggest.
rgds,
sankalp

Check the scheduling option in the start variant....
can you let us know what are the options that you had selected for scheduling the PC.
Activate the process chain and click on schedule (clock symbol) once after activation.

Process Chain problem related to Update ODS Object Data (Further Update)

Similar Messages

Maybe you are looking for