Process Chain Reqeust creation in BI
Hello ,
Can any one tell me how to create the Transport Request for Process Chain in BI .
When i am doing that through transport connection I am gettinh error :
1. Source systems are not transported
2. The user terminated processing of objects REQUEST
3. Operation cancelled at user's request
Thanks ,
Rahul
Hi,
Are tried collecting thru transport connection. Select the Grouping. After finding your PC drag and drop it right side and click on package it will ask for request. Then give the description for that request.
Or in a Simple way just again reactivate the PC it will ask for a request and create a New One. Give the package name and click on save.
by default $TMP will display, replace it with your package.
Do the transport for the same.
Reg
Pra
Similar Messages
-
List of all the process types used in the creation of process chains
Hi Gurus,
I am new to process chains creation, can any one give the list of all the process types used in the creation of process chains and there uses also.
Please search the forum before posting a thread
Edited by: Pravender on Jan 4, 2011 4:18 PMHi,
As process chain is to automate the data load step.
For Ex:- If you are loading data from R/3 to DSO CUBE.
Here you require Info package to load till PSA.
DTP to load till DSO
Another DTP to load Cube.
And all other process like psa deletion AND process you can find in RSPC tab.
Thnaks,
Saveen Kumar -
Index Creation wrong error in process chain
Hi Experts,
One of my process chain got failed due to following error:
"Index creation in Infocube got wrong"
can anyone help,how to resolve this issue?
Edited by: Nirav Shah on Dec 21, 2007 7:05 AM1)You can even see the INDEX in DB02 t.code
2)Goto Cube -> Manage -> Performance TAb -> Repair Indices (you can see all the index related statuses hre, like check indexes, repair indexes, you will get the green/red status here if you got green status no worries, if red you can rebuild indexes)
3) You can read the message from Process logs and you can find out some solve issue from there also
Edited by: Aduri on Dec 21, 2007 7:10 AM -
Hi Gurus,
I am a beginner in <b>SAP BW</b>, can anyone kindly guide me in creation of <b>process chains (step by step)</b> and if its not of too much trouble give some detailed info on this topic.
thanking you in advance.
with regards
sreedharHi Sreedhar,
If you can access the InfoIndex at www.service.sap.com/bi, there are useful documents about Process chains. If you cannot access these, provide your email ID and I can send them to you.
You can also check the following link:
http://help.sap.com/saphelp_nw04/helpdata/en/67/13843b74f7be0fe10000000a114084/content.htm
Hope this helps... -
Process chain creation and which are the module depending
Hi Expert,
I have confusion on process chain creation and triggering the process chain also same of the module are depending other module what those. What are thing we take consideration Please guide me in this regards .
Regards,
Ravi
Edited by: Ravichendra k on Oct 15, 2008 11:48 AMHi,
Here are a few links about process chains. Hope it helps.
http://help.sap.com/saphelp_nw04/Helpdata/EN/67/13843b74f7be0fe10000000a114084/content.htm
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=howtocreateaprocesschain&cat=sdn_all
http://sapbwneelam.blogspot.com/2007/09/how-to-start-process-chain-through.html
Regards,
Gaurav -
Error in process chain creation : SET SCREEN not allowed in subscreens
Hello,
We are getting an Error in process chain creation : SET SCREEN not allowed in subscreens SAPRSSM 0100.
Please give a solution. Thanks in advance.
RR.Just do detail view on in the process chain. It will take you to the error. See the message and then display message. You can know why the message is appearing.
-
Error in Process chain creation
Hi All,
My dataflow is:
R/3---ODS--Cube.
R/3 to ODS is Daily Load
ODS to cube is Monthly Load.
I am planning to create 2 process chains.
One I did from R/3 to ODS with following Processes.( This Chain Is OK)
Start----Execute ODS Infopackage--
ODS Activation.
Second One with (Error)
Start-----Further Processing--Delete IndexLoad Data--Create Index.
When I click on Checking View I am getting Red mark on Load data Process.
WHen I take Further Process as variant It proposed Activation of DSO process Again, I removed that process.
Details of the eRROR IS: Infopackage ZPAK_**is generated, Not able to be used as Loading variant.
Can ANy body help me on this and what could be the best way to create chain for this flow.
Regards,
MadhuHi Friend,
Q. Second One with (Error)
Start-----Further Processing--Delete IndexLoad Data--Create Index.
A. The Flow should be :
Start - > Delete Index for Cube - > Load Data (IP to load from ODS to Cube) - > Create Index for Cube.
Hope this helps.
Regards
Hemant Khemani -
Problem with creation of a file in a process chain
Hello dears,
I included a abap program in a process chain.
This abap program allows to create a file in a directory.
I'm using the function module GUI_DOWNLOAD for this.
1/ When I execute the program in SE38, it creates the file in the directory.
2/ When I launch the process chain, the program is executed but it doesn't create the file as expected.
=> The message is: "You have no authorization for export the object" (exception id 5 "no_authority" of the function module).
3/ So I tried to change the attributes of the process chain: process chain/attributes/execution use and i used current user (myself) or special user (myself).
When I launch the process chain, the programs is executed but it doesn't create the file
=> The message is: "Could not ascertain code page" (exception id 6 "unknown error" of the function module).
So my question is:
How to create a file using GUI_DOWLOAD in a program included in a process chain?
Regards,
VinceHi,
Try using Open Data Set file for output to load in to application server.
The GUI_DOWNLOAD only gets the data to the presentation server,.
I think you are expecting the file in AS running GUI_Download gets only to Presentation Server.
Thanks & Regards,
Vishnu -
Creation of Decision in Process Chain to load data to a SPO
Hi,
I have a question regarding adding a Decision type to my Process chain.
I want to load data to a SPO that contains 12 InfoCubes (Jan - Dec) from a DSO, but I do not want to start all 12 DTP's.
Want I am looking for is a way to only start the DTP's that load to the InfoCubes that contain current month, last month and all other data should be loaded to a Infocube (nr 13) that is not a part of the SPO so I would only have 3 DTP's running at the same time and not 13.
E.g. A delta load to the DSO contains 3 records; 1 for 2014.09, 1 for 2014.08 and 1 for 05.2013 triggers the DTP to the January InfoCube, the DTP to the August InfoCube and the DTP to the 13 Infocube.
Is this possible by using a Decision and if so how?
Kind Regards
SteffenI haven't worked with SPOs yet, but I do work frequently with decisions, so here's my 5 cents...
In your case you wish to have your decision based on the data contained in "a delta load to the DSO". I'm assuming you're talking InfoPackage here, because you wish to execute the DTP's afterwards.
So basically you need to determine which "months" are in your incoming data packages. The only way I see that possible is via start/end routine. In your example, you would look the data package and find 3 records each with a different month, being 08.2014, 09.2014 & 05.2013. You could then "convert" these to just numbers ranging from 1 to 13. That makes it relatively "easy" to link the right DTP to the right "number".
Now, how to pass that info (those numbers) back to the "decision" process? By default you base your formula on a "system" field (see basic how to link below). I don't see how this would work in your case. You'll need to somehow export your "numbers" (most likely an internal table or a "range") to memory (or fill it in a [z-]table) and then read it back in with custom code. I haven't done that yet (at least not in the context of decision steps), but I would recommend to have a look at the "experienced" way of working document below. It won't be easy, but I think it could work.
Cheers,
Raf
The official documentation can be found here.
For a "basic" how to on decision step, click here.
For a more "experienced" way of working, click here. -
Process chain creation: error:
Hi,
i am creating process chain for the data upload of three info packages!
Two are master data IPs and one is transactional data IP. ( Requirement is to make single process chain for the master data and transactional data ).
Before transactional data upload, i had included the process delete indexes.
When i check the process chain, it says:
"process DROPCUBE variant is referenced but not in the chain "
May i know what is wrong with this process flow? i had actually done similarly in dev system it was not giving any error:
Please suggest me
Thanks,
RaviHi Ravi,
Did you go for Meta chain, if not please try that. Be a bit clear on the question.
regards,
ashok. -
Not able to include infopackage in process chain creation
Hi Gurus,
I'm creating a process chain. while including the infopackage its not allowing me to select the existing infopackage.
i'm geitting the message "no data selected".
First we had checked the maintain process types - if the loading process type is maintained or not, we could not find that particular process there we had created a new entry by taking the values from the table "RSPROCESSTYPES".
Now its show in the maintain process types in RSPC tcode.
But still could not add the infopackage.
any one please throw light on this.
regards
KP
Edited by: KP on Sep 5, 2009 2:55 PMHi,
If your infopackage is active .. then you should be able to add in the process chain. Please check all the objects if they are active or not. secondly Execute Infopackage is the standard process type available - you dont need to activate the same. Also one rough estimate is to check with your authorizations.
you can also refer to below link.
http://help.sap.com/saphelp_nw04/helpdata/en/8f/c08b3baaa59649e10000000a11402f/frameset.htm
hope this helps.
Regards
Raj -
Urgent,: Info package prob in process chain creation..
Hi Experts,
I wanted to create a process chain for my master data, so then i started creating it, initially when i started executing info package which is the first step to undertake, the list of info packages is not generating when in clicked upon search icon. Rather it says "no data selected". Am not familiar in creating process chains. This is the first time i started creating.. Could you plz assist me with clear information in how to resolve this?
Thanks.Hi,
Check this link:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8da0cd90-0201-0010-2d9a-abab69f10045
/people/vishvesh.bahirat/blog/2006/11/29/bw-process-chain-design
/thread/471435 [original link is broken]
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/80a35cb9-fc1c-2a10-cfa8-94b94e5ac7a9
documentation about the complete sap-proces-chain
Kind Regards,
Arun.M
Edited by: M Arun on Jan 10, 2008 4:06 PM -
Creation of process chains in 2004s
Dear friends
Does anybody as a step by step guide on how to create a process chain in 2004s . as this is new i am bit confused on creating them . we are useing standard business content. but while creating the process chains they are bit different and i am unable to create process chians . so can one help on this by sending some example screen shot of the process chain created and steps how to create process chain for standard business content in 2004s . if possible please send it to (email address removed by moderator) or mention steps how to or atleast example screenshot . please look forward toyour replies . thankyou friends .
raghavendra
Message was edited by:
Ronald SilbersteinSame as BI 3.x
http://help.sap.com/saphelp_nw04/helpdata/en/67/13843b74f7be0fe10000000a114084/content.htm
However enhanced features available with NW2004s as below-
http://help.sap.com/saphelp_nw2004s/helpdata/en/58/9c6c4251e4c153e10000000a1550b0/content.htm
Hope it Helps
Chetan
@CP.. -
Hi All,
I am creating process chain.
first i have given the name and description of the process chain --> then next step is insert start process So, i have clicked on new and given the name then click on continue --> so it populates one window and it says that " Changes to Repository or cross-client Customizing are not permitted " AND ''Choose 'Display object' or 'Cancel'' .
when i clicked on display object it shows "Changes cannot be made, display user only"
and in brief it says that
Diagnosis:
In this logon client, any changes to the Repository and to cross-client Customizing objects are prohibited.
System Response:
The function terminates
Procedure:
If you still want to make the changes, contact the system administrator, who can allocate you a user in a client where you can make the changes.
What should i do ?
Regards,
BI NEWHi
This is an authorization problem
Check this link
http://help.sap.com/saphelp_nw2004s/helpdata/en/35/c7e442e3c15704e10000000a155106/frameset.htm.
Ask for proper authorization for creating the process chain.
Hope this helps.
Regards
Shilpa -
Process Chains creation in support
Please search the forums before posting on how to transport process chains
Dear Friends,
i have created process chains in DEV. how to transport Process chains to support?
is it possible to create Process chains in Support?
Regards
ramana
Edited by: Arun Varadarajan on Jun 9, 2009 11:44 PMHi,
Please check the Forum, You will find lot of discussion on this topic.
You can transport the process chain by collecting it in transport. Based on authorization and system setting you can create it in Production system as well but it is always recommended to transport it from DEv in order to avoid problems in future.
Regards,
Kams
Maybe you are looking for
-
Hi Friends, One of our client wants to change the UOM in PO. But they have done GR for part quantity. So it is not allowing to change UOM. So I have told them to reverse the GR. After reversing the GR if it not allows to change the UOM what can I do?
-
Business area not updating automatically.
Hi Gurus, Business area is not getting updated when a transaction is posted thru PO/SD process. BA is getting updated only for line items i.e. FI-MM(GL maintained in OBYC) and FI-SD(GL maintained in VKOA) but the same is not happening for line it
-
Connot download adobe flash player
connot download adobe flash player
-
Importing videos from enhanced cd's
is it possible to import videos from "enhanced cd's"? if so how do i do it.
-
HT204003 How do I add fandango into passbook?
OK, maybe I am just getting old, but how the heck do I add the Fandango app into Passbook? Seems redundant to me, having to add the app, then use passbook. Since Apple has done a HORRIBLE job with docs for this app, can anyone explain it to me? Tha