Process chain return code 8 error.

Hi Friends,
one of my process chain local process chain is getting failed due to the following error message,After checking the local chain inside it is fine only problem is with this local content master data showing as red,How to turn it to green.
job got cancelled due to the below error message.
Chain 0TCT_MD_C_FULL_P01 Was Activated And Scheduled
Cannot activate job BI_PROCESS_TRIGGER (return code 8)
Process did not report an instance -> no log
Job cancelled after system exception ERROR_MESSAGE
Please guide me.
Thanks,
V.Singh.

HI VRV,
Step 1: Goto Display messages on right click of your Process chain
Step 2: Goto "Chain" tab and copy "Variant" and "Instance"
Step 3: Goto SE11 and Select table RSPCPROCESSLOG
Step 4: Paste the "Variant" and "Instance" and execute it, and the value of the other fields are returned: LOG_ID, TYPE, BATCHDATE and BATCHTIME
Step 5: Goto SE38 and enter RSPC_PROCESS_FINISH
Step 6: Enter the values in the fields received from RSPCPROCESSLOG  table. Additionally, make the STATE as "G‟ -> Execute
Then your Process Chain will turn to green and proceed further......
Hope this helps........
Regards,
Suman

Similar Messages

  • "Wrong process return code" Error which using OS Command

    Hi,
    I want to execute a shell script in unix which calls a sed script and input to the script is an xml file. I am using OS Command tool to call the script which fails with "Wrong process return code" error. I ran the command directly on UNIX box and works fine but fails when executed through a package in ODI.
    The command I am passing in OS Command window is as follows:
    /test/callSed.sh emp.xml
    I also tried ODIOSCommand but getting the same error. The shell script has execute privileges for all users. Is there any other property to be set up for running shell scipts through ODI?
    Appreciate you response.
    Thanks!

    Hi,
    Thanks for a quick response.
    I tried both the commands you sent. "sh ./test/callSed.sh emp.xml" threw Wrong process return code error and "./test/callSed.sh emp.xml" threw the following error:
    java.io.IOException: Cannot run program "./test/callSed.sh": java.io.IOException: error=2, No such file or directory
         at java.lang.ProcessBuilder.start(ProcessBuilder.java:459)
         at java.lang.Runtime.exec(Runtime.java:593)
         at java.lang.Runtime.exec(Runtime.java:431)
         at java.lang.Runtime.exec(Runtime.java:328)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execOsOrders(SnpSessTaskSql.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execOsOrders(SnpSessTaskSql.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSqlS.treatTaskTrt(SnpSessTaskSqlS.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
         at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
         at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
         at com.sunopsis.dwg.cmd.DwgCommandScenario.treatCommand(DwgCommandScenario.java)
         at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
         at com.sunopsis.dwg.cmd.e.k(e.java)
         at com.sunopsis.dwg.cmd.g.G(g.java)
         at com.sunopsis.dwg.dbobj.SnpScen.a(SnpScen.java)
         at com.sunopsis.dwg.dbobj.SnpScen.localExecuteSync(SnpScen.java)
         at com.sunopsis.dwg.tools.StartScen.actionExecute(StartScen.java)
         at com.sunopsis.dwg.function.SnpsFunctionBaseRepositoryConnected.execute(SnpsFunctionBaseRepositoryConnected.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execIntegratedFunction(SnpSessTaskSql.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execCollOrdersIntegratedFunction(SnpSessTaskSql.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSqlS.treatTaskTrt(SnpSessTaskSqlS.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
         at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
         at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
         at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
         at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
         at com.sunopsis.dwg.cmd.e.k(e.java)
         at com.sunopsis.dwg.cmd.g.A(g.java)
         at com.sunopsis.dwg.cmd.e.run(e.java)
         at java.lang.Thread.run(Thread.java:619)
    Caused by: java.io.IOException: java.io.IOException: error=2, No such file or directory
         at java.lang.UNIXProcess.<init>(UNIXProcess.java:148)
         at java.lang.ProcessImpl.start(ProcessImpl.java:65)
         at java.lang.ProcessBuilder.start(ProcessBuilder.java:452)
         ... 31 more
    Regards,
    Aks

  • How repeat a process step in a process chain automatically after error?

    Hello guys.
    Have some method to repeat automatically a process in a process chain after a error occur ?
    Now, we need to make a manual procedure for repeat the process... We need make it more "fast", one "auto repeat" when failing.

    Hi Leo,
    Auto repeat of a process chain is always not ad visible as in most of the cases we can see the job got finished in SM37 and even spool got generated but unfortunately it will fail if any of the data package is wrong.In these cases we can skip the process chain and make it continue.
    I have written a blog on the same.please go through it.i feel for those scenarios it is good.
    How to override a process block in the process chain and make it force complete ?
    My personal advice is to go and check the job log before repeating any process as the job may fail for n no of cases.it is a complex challenge of adding all those errors tracked.
    Regards,
    Kannan

  • Return code errors 4,8,12

    hi
        what are return code errors 4, 8, 12 can any one explain me
    Please search the forum before posting a thread
    Edited by: Pravender on Aug 18, 2011 1:42 AM

    hi Gersh,
    I checked in dev system, infoObject /CPMB/NUD8H9B and its' attribute/CPMB/MBRSEQ. Both are active and  infoObject /CPMB/NUD8H9B  is under infoarea "custom appset".
    But if i check it in target system both are inactive status and  infoObject /CPMB/NUD8H9B  is under unassigned node infoarea.  
    When i tried to activate infoobject via sap program, system couldn't do that and saying attribute is not in active state. Like wise several /cpmb/xxxxxx infoobjects are in status "inactive".
    Do i need to activate standard appshell via ujs_activate_content program in order to activate all /cpmb/xxxx related infoobjects.
    Or can i follow method of delete custom appset from target system and  shadow table contents in source system. Then freshly creating new req in dev system. Is this solves my problem?
    any suggestions pls.
    thanks

  • Traport importing problem with repeating return code error 8

    Hi all,
    We are facing some transport import problem.When we sent transport initially AAA900244,they faced with return code error 8 and syntax error 109.As the information provided by the client,one of the include  program which is not availble at client system that was included in this transport.So that was the problem.Again we have taken  new  tranport AAA900247 without this include program then same type of error message they faced with return code error 8 and syntax error 109 in the include program when imported.
    I have one doubt, when importing new transport this should overwrite the earlier transport data.Why the same type error client is getting.What might be the reason.
    Is earlier transport  imported?? Why it throwing same type error.What actually the fuctionality of Return code 8 whether it is imported or discarded.
    Thanks in advance.
    Regards.....Balu

    Hi Ramesh,
    That include is not at all required at client system.So next time when we have taken transport we have not included this include program.They imported new transport without this include program.But they are facing same error as they faced first time. What could be reason??
    Regards...Balu

  • Process chains get an error when run analysis process

    When my PRD system‘s process chains run analysisi process, I  gets below error message:
    Error occurred when starting the parser: Error when opening an RFC connection (FUNCTION: 'R
    Message no. BRAINOLAPAPI011
    Diagnosis
    Failed to start the MDX parser.
    System Response
    Error when opening an RFC connection (FUNCTION: 'R
    Procedure
    Check the Sys Log in Transaction SM21 and test the TCP-IP connection MDX_PARSER in Transaction SM59.
    It's OK when i test the TCP-IP connection MDX_PARSER in Transaction SM59.
    The Sys Log in Transaction SM21(error part):
    M Wed Mar 19 09:22:50 2014
    M  *** ERROR => ThPOpen: ExecPopen("/usr/sap/BWP/DVEBMGS00/exe/tp" bwprd sapgw00 18933904 IDX=35, r, ..) returned -14 [thxxexec.c
    M  {root-id=532810645F5D12A0E1008000C0A8642F}_{conn-id=5328109B5F5D12A0E1008000C0A8642F}_5
    A  RFC 1878  CONVID 18933904
    A   * CMRC=0 DATA=0 STATUS=0 SAPRC=0 RfcExecProgramKernel RfcRaiseErrorMessage cmd could not be started by OS (rc = 1)
    A  RFC> ABAP Programm: SAPLSTPA (Transaction: )
    A  RFC> User: JY-LKZ (Client: 900)
    A  RFC> Destination: CALLTP_AIX (handle: 8, DtConId: 530F4E5C30AF4550E1008000C0A8642E, DtConCnt: 0, ConvId: ,)
    A  RFC SERVER> RFC Server Session (handle: 1, 68443927, {5328109B-5F5D-12A0-E100-8000C0A8642F})
    A  RFC SERVER> Caller host:
    A  RFC SERVER> Caller transaction code: STMS (Caller Program: SAPLTMSC)
    A  RFC SERVER> Called function module: TMS_CI_START_SERVICE
    A  *** ERROR => RFC Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1887
    FUNCTION: 'RfcExecProgramKernel'
    RfcRaiseErrorMessage cmd could not be started by OS (rc = 1)
    PROG ="/usr/sap/BWP/DVEBMGS00/exe/tp" bwprd sapgw00 18933904 IDX=35
    [abrfcio.c    9213]
    A  {root-id=532810645F5D12A0E1008000C0A8642F}_{conn-id=5328109B5F5D12A0E1008000C0A8642F}_5
    A  TH VERBOSE LEVEL FULL
    A  ** RABAX: end RX_GET_MESSAGE
    M
    M Wed Mar 19 09:23:15 2014
    M  *** ERROR => ThPOpen: ExecPopen("/usr/sap/BWP/DVEBMGS00/exe/tp" bwprd sapgw00 18968493 IDX=61, r, ..) returned -14 [thxxexec.c
    M  {root-id=532810645F5D12A0E1008000C0A8642F}_{conn-id=532811958F750F10E1008000C0A8642F}_1
    A  RFC 1878  CONVID 18968493
    A   * CMRC=0 DATA=0 STATUS=0 SAPRC=0 RfcExecProgramKernel RfcRaiseErrorMessage cmd could not be started by OS (rc = 1)
    A  RFC> ABAP Programm: SAPLSTPA (Transaction: )
    A  RFC> User: TMSADM (Client: 000)
    A  RFC> Destination: CALLTP_AIX (handle: 3, DtConId: 530F4E7830AF4550E1008000C0A8642E, DtConCnt: 0, ConvId: ,)
    A  RFC SERVER> RFC Server Session (handle: 1, 70212851, {53281195-8F75-0F10-E100-8000C0A8642F})
    A  RFC SERVER> Caller host:
    A  RFC SERVER> Caller transaction code: STMS (Caller Program: SAPLTMSC)
    A  RFC SERVER> Called function module: TMS_CI_START_SERVICE
    A  *** ERROR => RFC Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1887
    FUNCTION: 'RfcExecProgramKernel'
    RfcRaiseErrorMessage cmd could not be started by OS (rc = 1)
    PROG ="/usr/sap/BWP/DVEBMGS00/exe/tp" bwprd sapgw00 18968493 IDX=61
    [abrfcio.c    9213]
    A  {root-id=532810645F5D12A0E1008000C0A8642F}_{conn-id=532811958F750F10E1008000C0A8642F}_1
    A  TH VERBOSE LEVEL FULL
    A  ** RABAX: end RX_GET_MESSAGE.
    ps.
    1、IT's everything ok in the development system.
    2、It’s ok when i repeat this analysis process .
    3、It’s ok when i run this analysis process in analysis process designer.
    4、Attachment is the sys log in sm21.
    Thanks everyone.

    Hi Vignesh.B,
    Yes,it's not user's problem . But i don't  think it APD's problem .Cause all APD has the same problem and .
    Below is one of APD souce and target :
    Hope this information  is useful .
    Regards,
    Lian

  • Process Chain - confirmation code

    Dear Experts,
    Based on a generic extractor, we load data in a delta mode from the datasource to the corresponding infocube via RSPC.
    Unfortunately, when running the process chain in batch mode, the first stage consisting in data load to the PSA fails.
    Actually, within the monitor, it appears there is no confirmation code releasing the process and after a certain time, it stops in error. When setting it to green before time out, the process chain goes till the end. Could you pelase let me know how to automatically return a confirmation when the PSA load has been correctly done.
    Kind Regards,
    Ludovic

    Hi,
    Your query is not clear. Are you telling that even though the dataload to PSA is happening, it shows that the dataload is still active?
    If thats the case, it appears that IDOCs are not properly flowing between the 2 systems.
    Check in WE02 in source system to see if any RSRQST/ RSINFO/ RSSEND idoc is in yellow status. If it is, take it to BD87 and process it. If the idoc was RSRQST type, it would start dataloading after execution in BD87. If it was of other types, it would send the details back to BW/ BI system about the confirmation of dataloads.
    If your query is about anything else, please give more details.

  • Process Flows: Return Code or Message Severity

    Hi all,
    I am trying to get a decent email system set up that will let me know which part of our OWB ETL load has warnings or errors.
    I have one main Process Flow that calls several other process flows. On both levels, I need to know if any errors or warnings were encountered during execution.
    There is a function WB_GET_RETURN_CODE which I hoped to use to get the return codes of the process flows, but while testing, I noticed that there are not return codes for process flows.
    My backup solution is to check ALL_RT_AUDIT_EXEC_MESSAGES if there are any records in there. If there are, I check if they are ERROR or WARNING. Would this be a good solution to my problem?
    Or is there a better way to find errors/warnings of process flows?

    HI VRV,
    Step 1: Goto Display messages on right click of your Process chain
    Step 2: Goto "Chain" tab and copy "Variant" and "Instance"
    Step 3: Goto SE11 and Select table RSPCPROCESSLOG
    Step 4: Paste the "Variant" and "Instance" and execute it, and the value of the other fields are returned: LOG_ID, TYPE, BATCHDATE and BATCHTIME
    Step 5: Goto SE38 and enter RSPC_PROCESS_FINISH
    Step 6: Enter the values in the fields received from RSPCPROCESSLOG  table. Additionally, make the STATE as "G‟ -> Execute
    Then your Process Chain will turn to green and proceed further......
    Hope this helps........
    Regards,
    Suman

  • Integration Process w/ return code 99

    Have a very weird situation with an integration process. In our development environment, in SXI_CACHE, it returns a return code of 99 signalling some type of error. The weird problem is that the process works just fine. It's an IDOC to flat file scenario and the flat file gets generated each time perfectly. This is with the process status of 99 in SXI_CACHE.
    However, when the process is moved to QA, it does not work at all. The messages get stuck in SXMB_MONI with message "message has error on outbd. side". When I click on the PE to view the error, it appears the workflow behind the process is defined incorrectly becasuse in the event trace I see:
    <b>Workflow definition of task 'WS90100009' cannot be activated.</b>
    The reason for this error is
    <b>Container element '_CRL_I001ZMTRLNO_0025' not available</b>
    What is killing me is that this same error occurs in our development environment, yet the process still works fine.
    Can someone possible explain what the container error might mean and how to fix? The workflow never gets kicked off because the definition is not active.
    Thanks

    all green in that transaction...
    in the process, i have two branches.. one to receive a MATMAS the other to receive a ZCLFMAS IDOC....
    a file gets generated when any of the following conditions occur
    - both IDOC's are received for the same material
    - only MATMAS or ZCLFMAS are received and the other message type is not received within 3 minutes... we have time controls on the two branches
    the error is in the initial receive step...keeps saying that container element is not available yet I have no idea what that means

  • Relaunch process chain failed. Error 8

    Hi experts,
    My problem deals with chain of load.
    The chain was launched by user ALEREMOTE.
    After a loading process failed it become red. Then I attempted to repeat o repair the process failed and the answers was:
    JOB_PROCESS_LOADING could not be scheduled. Return code 8.
    So, I couldn't relaunch the chain from the process failed.
    Please, could anyone help me.
    Thank you very much in advance.
    Jorge

    HI,
    This is due to lack of authorisations in the production box.Try to repeat it once again and again it will give the same pop up
    go to su53 transaction code there you can see the authorisation faliure send the screen shot to the basis or authorisations team to add it to your role.
    After adding just logoff from sap and then try tologin and repeaat the job this will work.
    Regards,
    Vikram

  • Process chains in red(errors occurred), monitoring in green

    Hi friends,I have same problems with the monitoring / process chains.
    For exemples in the Monitor for OMAT_SALES in the tab Status I have green for Total and Technical with the message:
       Data successfully updated
       Diagnosis
       The request has been updated successfully.
       InfoSource : 0MAT_SALES
       Data type : Texts
       Source system: PRD-600
    In the tab Details I have:
    -the Overall status in red, error occures or missing messages
    -the requests, extractions,transfers,processing-everything is Ok-green
    -the Process Chains-errors occurred-red
    In the transaction RSPC the infopackage for load data OMAT_SALES is red,the next infopackage in the chain is green.
    What can I do to fix this problem  for Process Chain in RSPC and also in Monitoring (tab Details)?
    I will apreciate any answer,
    Thanks,
    Claudia

    The next connected infopackage must be connected with Always link that's why its processed even after the failure node. Go and cross check what errors you got for the failed process, and reload it manually.

  • Process Chain Ended with Errors - cause unknown

    I have had several instances of process chains stopping for no apparent reason.  The stops occur between 2 master data infopackage loads.  The last step is green and the next is grey.  The PSA table has been updated successfully for the last step.  All IDocs are in green status in both systems.  The monitor for the last successful step does say "Ended with Errors" although no errors are evident.  The process chain starts back up via Repeat at the next (grey) step and continues successfully.  There were no system problems or connection interruptions that occurred during the time the process chains failed.  There were no changes in the remote user profile.
    This exact problem has occurred a half dozen times since our application of ECC Support Packs several months ago and had not occurred before.  The infopackages are different each time. Two different process chains have had this problem.  I have re-activated and re-scheduled the process chains without solving the problem.
    Thanks for any ideas on why this may be occurring or what I can do to prevent it.
    Patty Moffatt

    Hi Des,
    Here's my BW release info:
    SAP_ABA        640       0019 SAPKA64019     Cross-Application
    SAP_BASIS      640       0019 SAPKB64019     SAP Basis          
    PI_BASIS       2005_1_6400009 SAPKIPYJ69     Basis Plug-In
    ST-PI          2005_1_6400008 SAPKITLQH8     SAP Solution Tools Plug-
    SAP_BW         350       0019 SAPKW35019   SAP_BW                      
    ECC SPs 13-21 were applied before the BW problem started:
    SAP_BASIS      640       0021 SAPKB64021    
    SAP_ABA        640       0021 SAPKA64021    
    PI_BASIS       2005_1_6400012 SAPKIPYJ6C   
    ST-PI          2005_1_6400008 SAPKITLQH8    
    SAP_BW         350       0021 SAPKW35021   
    PI             2004_1_5000016 SAPKIPZI6G    
    The process chain step and the monitor load both are green.  The Details tab shows all the processing is green, but the Process Chain itself is red with "Errors Occurred.  There have been no runtime dumps.
    Patty

  • Process chain failing with error 8 in BI 7.0

    Hi ,
    we have upgrade the dev to BI 7.0 and I am trying to execute the process chains but it is failing with a error 8 due to the step of the job BI_PROCESS is in the name of a old user. So i have changed in process chain -Attrbutes--Execution user --- current user.So the chain has started but it has so many chains inside the Meta chain it looks i need to go to each of them and change as cyurrent user.
    But is there some place where I can change globally to a Batch user/current user for these process chain in BI 7.0.If so pl let me know.

    Hi,
    user SM37 to identify all BI_PROCESS jobs and change the User of the step in the jobs (they all should only have one step).
    bye
    Frank

  • Transporting Process Chains-includes the ERROR DTPs in the Target System

    Hello Gurus,
    Iam facing an issue in version NW2004s while transporting the Process Chains from DEV to QA. The Process Chains in the Target system are including the ERROR Dtps as parallel loads along with the regular DTP.This happens when there exists an ERROR DTP in the Target system at the time of Transport.
    This will cause a problem
    1.these would run parallel to the regular DTPs.
    2.no of back ground processes running at any point will be beyond our limit.
    Let me know if you have faced the same issue and how you resolved it.
    Thanks
    Jagadish

    Hi DPN,
    Check oout this thread. This might solve yuor problem.
    Errors in Transportation
    Thanks and Regards
    Subray Hegde

  • Process chain failures and errors therein

    Hi all,
    Can anyone please guide me as to why the process chain fails?
    what are the <b>various kind of errors</b> most often encountered? and how we can recifty them.....???
    Your kind suggestions are thankfully acknowledged,
    thanks and regards,
    shalini.

    Hi Shalini,
       Process Chain fails due to several reasons. if you come up with any questions our masters will guide you.
    Process Chain fails mainly due to data problem.
    Regards,
    Nagesh.

Maybe you are looking for

  • How can I get a list of DSNs currently registered?

    Hi everybody, Can anyone tell me how to obtain a list of the DSNs currently registered on my machine using Java? I want to populate a drop-down list for the user (an administrator) to select the requisite DSN to work with. I realise that this is prob

  • How to get User Id in Web dynpro application

    Hi Experts, I am running web dynpro application with authentication checkbox set. I want to display user id of the user in my application. I am using following code in Init method of component controller. IWDClientUser wdUser = WDClientUser.getCurren

  • XI to RFC Scenario: Runtime error during RFC Call

    Hi, I am testing a XI-to-RFC scenario involving BPM. The RFC works perfectly from SE37; but I get 'ICM_HTTP_TIMEOUT, Error code 402' when I invoke it from XI. On digging through the problem, it appeared that the calling program produced a short dump

  • Aperture Gallery Full Resolution Download

    Does anyone know how to set Aperture to create a web gallery with links to the full-resolution photo?

  • Mac vs. Windows CS5(.5) (not a flame)

    Guys,         I swear that I am not flaming here and that I am relatively new to adobe products. In fact, I learned the ins and outs of Dreamweaver CS5, but that's pretty much it. My interest in Adobe products has increased a lot and I recently purch