Process chain: rspc
In checking view of PC i get :
A type "Attribute Change Run" process has to follow process "Save Hierarchy"
color : yellow
However, in log view everything is in Green (meaning Ok)
Why the differ in the above two / what does it mean ?
SAP tried to build some validation logic into the process chain maintenence process. They have certain expectations when they check the PC, e.g. when you load a hierarchy, you would normally want to perform a Change Run to update any aggregates that might have the hierarchy embedded in them.
The checking view is just warning you about what SAP believes is an omission in our PC. When you activate the chain, you should have been given an option to disregard the warning. When the chain runs, all the steps that are in the chain run correctly, so the log will show green.
Now if you have aggregates, you might have problems because you did not run the Change Run - that is the issue SAP is trying to warn you about by showing something as yellow in the Checking view.
Some of the validation has changed over time and some steps that SAP considered to be necessary together in a PC may no longer be a requirement now so something that was flagged as yellow in one version of BW might not get flagged as yellow in a differnet version.
Similar Messages
-
Process chain (RSPC) modifcation in Quality and production system
Hi,
In our landscape quality and production system is set as non modifiable. But we want to modify the process chain (RSPC) in Quality and production system.
As per the thread Need input: do process chain/InfoPackages changeable on PROD in your compa? in RSA1 -> Transport connection we made RSPC ( Process Chain) , RSPT (process chain starter) and RSPV (process variants) are changeable.
With this setting we are able to create/ edit new process chain in Quality and Production system. But we canu2019t edit the transported Process chain. i.e. process chain transported from Dev to Quality system.
We donu2019t want to open Business Information Warehouse: Customer Namespace (/BIC/ ) in Quality and production system (Se06). Please let me know is there any other settings needs to be.
We are on BI 7.0
Regards
PreethishHi ,
In RSA1 -> Transport Connection --> Object Changeability
Object has 3 state
Not Changable
Changable Original
Every thing changable
What is the difference b/w Changable Original and Every thing changable
Thanks..
Preethish -
Process Chain - RSPC - related Abend
Hi All
I am using 2004s, nd when ever I tried to open any process chain I get an program termination with MESSAGE TYPE X. I created and executed process chain before. I am not even able to just open the same process chain I created before nor create a new one.
If anyone had come accross this error please advice. I need this to be solved quickly.
Thanks in Advance.
Alex.Thanks Nilesh,
I recently updated my front-end. It is not a system wide issue. Other's in my team are able to access without any issues. I think your suggestion makes sense.
Thanks,
Alex.
(I will award points to all the answers close to my questions once I check them..) -
BI IP Executing planning sequence via process chain not possible
Hi,
we use BI IP and have defined a process chain (RSPC) with value type process planning sequence. When we execute it, we get error message
"Inconsistent input parameter (parameter: <unknown>, value <unknown>)"
When we execute this planning sequence via the modeller or via SE38 RSPLS_PLSEQ_EXECUTE everything works fine. I thougt the cause could be the user of the job itself (job is executed with different user, and variant of planning sequence is user-dependent!), but I changed the user in the job itself as well without results.
any thoughts?
regards
D
nullHi,
I executed with my user and have a SAP_ALL authorization. Perhaps it could be because we use authorisation with the old method (4.0) (-> I'm not sure on this). I also think it has to do with authorization. I'll check this out with our authorization consultant.
D -
Process chain delete index from TABLE
is it possible to put a step in a process chain (/rspc) to delete and rebuild indexes from a normal table?
I can only find a way to do this for cubes... ?
thanks!Hi,
You have to export the table name and index name using the following str to FM :RSDU_DROP_INDEX
begin of rsdu_s_index,
tabname like ddstorage-tabname,
indexname type rsdu_indexname,
dbidxname type rsdu_index,
fieldname type rsd_fieldnm, "like dd17v-fieldname,
type_expected type rsdu_indextype,
type type rsdu_indextype,
type_check type rsdu_check,
unique_expected type rsdu_indexunique,
unique type rsdu_indexunique,
unique_check type rsdu_check,
partitioned_expected type rs_bool,
partitioned type rs_bool,
partitioned_check type rsdu_check,
status type rsdu_indexstatus,
status_check type rsdu_check,
end of rsdu_s_index,
so, you need to pass table name and index name through this structure.
hope it help....
Regards,
Raju -
How to send an email/sms in process chain
Hi,
I would like to send an email/SMS in a process chain with same key figures. I get the key figures from a query. But I need a program to send these key figures to email. Is there any programs to send an email like the transaction sbwp?
Thanks in advance!
kind regards
TobiasHi,
you may try this one,
Tcode: ALRTCATDEF
1. select classification "Process Chains"
2. click on display/change
3. double-click on "error in a process of a process chain"
4. click on "fixed recipients"
5. write in your username (you have to maintain your e-mail address in SU01 for that to work)
6. save
Tcode: RSPC
1. go to your process chain (rspc)
2. go into edit mode
3. from the menu, select Process chain -> attributes -> alerting
4. check "send alerts if errors occur" (select as per your requirement )
Hope this helps
Sukhi -
BI Content 7.57 SP4 Activating Process Chain
Hi,
I am trying to activate a process chain from BI content . My source system is ERP 6.0. While collecting objects for activating this Process Chain BW gives an errors. It says some of DTP and Transformations are missing. I have put two of the errors are at below.
When i search these missing objects on the BI content these objects are not exist. Also on the BW system they are not exist. I could not find any solution for this problem.
Can you please show me a way for solving this. I am stuck on this.
I am trying to activate following Process Chain.
Technical Name: 0HCM_FULL_P0EMPLOYEE
Name : Load Data for InfoObject 0EMPLOYEE
Error 1:
Shadow object DTP_DYF4USYQ4EYMWILRMUGLXW2KG cannot be expanded; chain is inconsistent
Message No. RSPC142
Diagnosis
You want to determine the objects that are source system-dependent for shadow object DTP_DYF4USYQ4EYMWILRMUGLXW2KG so that they can be inserted in the modified version of the process chain or of a referencing process. This was not possible.
Error 2:
Object DTP_ETKRN0DQM7QVOBZSVBC9J61HB (Data Transfer Process,DTPA) could not be collected for object 0HCM_FULL_P0EMPLOYEE (Process Chain,RSPC)
Message No. RSO296
Diagnosis
You have collected objects in the BW Metadata Repository. Associated objects for the object 0HCM_FULL_P0EMPLOYEE of type Process Chain,RSPC have also been collected. Object DTP_ETKRN0DQM7QVOBZSVBC9J61HB of type Data Transfer Process,DTPA was among these objects. This object
DTP_ETKRN0DQM7QVOBZSVBC9J61HB of type Data Transfer Process,DTPA, is not, however, available in the Metadata Repository.
System Response
Object DTP_ETKRN0DQM7QVOBZSVBC9J61HB of type Data Transfer Process,DTPA is ignored in further collections. The links for object 0HCM_FULL_P0EMPLOYEE of type Process Chain,RSPC are incomplete. This may result in not being able to activate this object.Hello experts
I am not able to find support package name.
When i click on package level button from SAPM tcode
BI_CONT 703 0000 - Business Intelligence Content.
Is my BI_CONT add-on installed successfully?
And also i am not able to see BI_CONT in imported packages list. -
Process chain executed synchronously produces dump and hangs
Process chain (RSPC) being executed synchronously hangs on a step (not first) with yellow status. Analysis of ST22 shows there is dump: RAISE_EXCEPTION
The chain loads data from flat files on frontend to several characteristics (attributes and texts). All the steps are sequential.
After the start first file is loaded successfully (info package), subsequent data transfer process has no errors too. But the second info package becomes yellow and hangs just after ( after some time timeout occurs and the step becomes red). In ST22 i see dump, text of the dump is below. Analysis of the dump reveals that 'GUI_UPLOAD' FM doesn't work during execution of the second info-package.
The chain looks as follows:
1. Info package 1
V
2. Data transfer process 1
V
3. Info package 2 <------- hangs here because of dump
V
4. Data transfer process 2
V
Hangs on step 3 (infopackage 2).
Text of the dump:
Runtime Errors RAISE_EXCEPTION
Date and Time 10.10.2010 19:07:59
|Short text |
| Exception condition "NOT_SUPPORTED_BY_GUI" raised. |
|What happened? |
| The current ABAP/4 program encountered an unexpected |
| situation. |
|Error analysis |
| A RAISE statement in the program "CL_GUI_FRONTEND_SERVICES======CP" raised the |
| exception |
| condition "NOT_SUPPORTED_BY_GUI". |
| Since the exception was not intercepted by a superior |
| program, processing was terminated. |
| |
| Short description of exception condition: |
| |
| |
| For detailed documentation of the exception condition, use |
| Transaction SE37 (Function Library). You can take the called |
| function module from the display of active calls. |
| - |
|How to correct the error |
| |
| If the error occures in a non-modified SAP program, you may be able to |
| find an interim solution in an SAP Note. |
| If you have access to SAP Notes, carry out a search with the following |
| keywords: |
| |
| "RAISE_EXCEPTION" " " |
| "CL_GUI_FRONTEND_SERVICES======CP" or "CL_GUI_FRONTEND_SERVICES======CM00X" |
| "FILE_EXIST" |
| |
| or |
| |
| "CL_GUI_FRONTEND_SERVICES======CP" "NOT_SUPPORTED_BY_GUI" |
| |
| or |
| |
| "RSBATCH1 " "NOT_SUPPORTED_BY_GUI" |
| If you cannot solve the problem yourself and want to send an error |
| notification to SAP, include the following information: |
| |
|System environment |
| SAP-Release 701 |
| |
| |
| SAP kernel....... 701 |
| |
| Patch level. 69 |
| Patch text.. " " |
| |
|User and Transaction |
|
| Program............. "CL_GUI_FRONTEND_SERVICES======CP" |
| Screen.............. "SAPMSSY0 1000" |
| Screen Line......... 6 |
| |
|Information on where terminated |
| Termination occurred in the ABAP program "CL_GUI_FRONTEND_SERVICES======CP" - |
| in "FILE_EXIST". |
| The main program was "RSBATCH1 ". |
| |
| In the source code you have the termination point in line 8 |
| of the (Include) program "CL_GUI_FRONTEND_SERVICES======CM00X". |
|Source Code Extract |
|Line |SourceCde |
| 1|method FILE_EXIST. |
| 2|* ... |
| 3| |
| 4| CLASS CL_GUI_CONTROL DEFINITION LOAD . |
| 5| |
| 6|*-check if valid GUI is available----
|
| 7| IF IS_VALID_HANDLE( ) NE 0 AND cl_gui_control=>www_active IS INITIAL. |
|>>>>>| RAISE NOT_SUPPORTED_BY_GUI. |
| 9| ENDIF. |
| 10| |
| 11|* check parameter, wild characters not allowed |
| 12| IF FILE IS INITIAL OR FILE CA '*<>|"'. |
| 13| MESSAGE 'WRONG PARAMETER: FILE_NAME' TYPE 'I' RAISING WRONG_PARAMETER. |
| 14| EXIT. |
| 15| ENDIF. |
| 16| |
| 17|* special handling for SAPGUI for HTML |
| 18| IF CL_GUI_CONTROL=>WWW_ACTIVE IS NOT INITIAL. |
| 19| |
| 20| DATA: rc type i, filename(4096) type C. |
| 21| filename = file. |
| 22| CALL FUNCTION 'ITS_QUERY' |
| 23| EXPORTING |
| 24| filename = FILEname |
| 25| query = 'FE' |
| 26| IMPORTING |
| 27| return = rc. |
|Active Calls/Events |
|No. Ty. Program Include Line |
| Name |
| 8 METHOD CL_GUI_FRONTEND_SERVICES======CP CL_GUI_FRONTEND_SERVICES======CM00X 8 |
| CL_GUI_FRONTEND_SERVICES=>FILE_EXIST |
| 7 FUNCTION SAPLSFES LSFESU16 96 |
| GUI_UPLOAD |
| 6 METHOD CL_GUI_FRONTEND_SERVICES======CP CL_GUI_FRONTEND_SERVICES======CM013 4 |
| CL_GUI_FRONTEND_SERVICES=>GUI_UPLOAD |
| 5 METHOD CL_RSDS_ACCESS_GUI_UPLOAD=====CP CL_RSDS_ACCESS_GUI_UPLOAD=====CM001 74 |
| CL_RSDS_ACCESS_GUI_UPLOAD=>IF_RSDS_EXTRACT_DIRECT~EXTRACT |
| 4 FUNCTION SAPLRSDS_BACKEND LRSDS_BACKENDU01 304 |
| RSDS_DATA_PULL |
| 3 FUNCTION SAPLRSSM LRSSMU17 5422 |
| RSSM_CALL_RSAR_DATA_REQUEST_1 |
| 2 FORM RSBATCH1 RSBATCH1 1327 |
| START |
| 1 EVENT RSBATCH1 RSBATCH1 498 |
| START-OF-SELECTION |If i load the step manually it works. The hung step is possible to re-execute after it gets red (with context menu) and it works then. After that it hangs on the 3rd info-package and so on.
The file lays on a network drive, but i suspect it doesn't matter -
Hi
I am trying to send email alerts (messages (sucess/Failure) thru my process chain , I gave the correct email -id a , but I'm not getting an email, after I schedule it, to I have to make any settings with Basis team?? Can some one share what are the initial steps , which have to be taken ??.
Thanks
PraveenHi Praveen,
Please follow the below steps
Would like to share this information regarding email alerts whenerrors occur in Process Chains.Step by step process to follow:
1. go to ALRTCATDEF
2. select classification "Process Chains"
3. click on display/change
4. double-click on "error in a process of a process chain"
5. click on "fixed recipients"
6. write in your username (you have to maintain your e-mail address in SU01 for that to work)
7. save
8. go to your process chain (rspc)
9. go into edit mode
10. from the menu, select Process chain -> attributes -> alerting
11. check "send alerts if errors occur"
Regards!
Mallikarjuna Reddy -
How to send the status of Process Chain to email address?
Hi,gurus here.
We monitor process chains' work status by RSPCM, but it's inconvenient.
Any method to send process chains' work status via email immediately instead of RSPCM?Any process in process chain fails, below will send mail to mail ID that specified
This can be perfectely done using Tcode ALRTCATDEF.
1. go to ALRTCATDEF
2. select classification "Process Chains"
3. click on display/change
4. double-click on "error in a process of a process chain"
5. click on "fixed recipients"
6. write in your username (you have to maintain your e-mail address in SU01 for that to work)
7. save
8. go to your process chain (rspc)
9. go into edit mode
10. from the menu, select Process chain -> attributes -> alerting
11. check "send alerts if errors occur".
http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=64389689 -
Email notification for Process Chain Status
Hi Experts
Can any one suggest me how to setup Email Notification for the Process Chain status
For eg If there is any error in the process chain is there any way that we get an Email notifications.
Thankshttp://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=64389689
This can be perfectely done using Tcode ALRTCATDEF.
1. go to ALRTCATDEF
2. select classification "Process Chains"
3. click on display/change
4. double-click on "error in a process of a process chain"
5. click on "fixed recipients"
6. write in your username (you have to maintain your e-mail address in SU01 for that to work)
7. save
8. go to your process chain (rspc)
9. go into edit mode
10. from the menu, select Process chain -> attributes -> alerting
11. check "send alerts if errors occur". -
Hi ,
I created a document in process chain (RSPC) for InfoPackages and when i update the data for the infopackage , next time when i open the process chain and check the infopackage document i am not able to find the updated data ....many times i tried but i am not able to see the updated data...could you plz help me out.
Thanks ,
anil dHi ,
I created a document in process chain (RSPC) for InfoPackages and when i update the data for the infopackage , next time when i open the process chain and check the infopackage document i am not able to find the updated data ....many times i tried but i am not able to see the updated data...could you plz help me out.
Thanks ,
anil d -
All Process Types not visible in RSPC ( process chain)
Hi,
When I go to create a new process chain in RSPC & look for process types to choose from I am not able to see all the process types.
when I go to table RSPROCESSTYPES or setting-->maintain process types , it shows all the enteries.
Am I suppose to do some steps before I start seeing all the process types in the left panel of my RSPC--process types.
looking forward to your help.
regards
VikashHi Agarwal
check the table RSPCCATEGORY ..In this table check whether there is an entry for the following..
General services
Load Process and Post-Processing
Data Target Administration
Reporting Agent
Other BW Processes
if not there maintain them..
bye
Shu Moh.. -
How to search for a process chain in RSPC ?
Hi,
Is there any way that i can find a process chain by giving the name of the variant.
I know that i can click on the DTP and from there i can go to the process chain if i know the DTP.
But here my problem is that i have a program which is calling a process chain now i what to what this process chain is doing.
Is there any way to find it?
Thanks in advance.
Reagrds,
RaghuHi Surendra,
Thanks for the inputs. Thanks for sharing some useful table names.
But this haven't solved my issue.
I have the below mentioned code in a program.
CALL FUNCTION 'RSPC_CHAIN_START'
EXPORTING
I_CHAIN = 'YPC_VARIANT_FOODS'
I_T_VARIABLES =
I_SYNCHRONOUS =
I_SIMULATE =
I_NOPLAN =
IMPORTING
E_LOGID = LOGID.
Now i want to see the Process chain ( 'YPC_VARIANT_FOODS' ) in RSPC.
Actually 'YPC_VARIANT_FOODS' is a variant.
Any way to achieve this?
Thanks,
Raghu -
How to setup "Server Groups" in RSPC (process chains)?
I'm a BASIS person working with our BI group on setting up their loads to only run on the application servers. If you don't define a host in RSPC, it will always run on the database server. We don't want to specific one host in case that server has issues. How can we setup the "server group" so we can use all our application servers for these process chains. It doesn't seem to use the SMLG logon groups we defined already.
Thanks in advance!I have setup the load balancing in the RFC, but for these jobs that are submitted via RSPC, they don't look at the SMLG parameters, they just always pick the database server. We can specify one host (other than the database server) in RSPC similar to SM36, but we were trying not to do that so in case that server is down, these jobs wouldn't fail.
I thought we could setup a "server group" and assign our 3 application server to them that way they would never fail if one is unavailable and it would keep them off the database server.
Maybe you are looking for
-
Video choppy in Apple TV2, iTunes, RealPlayer and QT - but perfect in VLC
I have some videos that are really choppy when I play then on iTunes on my iMac (OS X with the latest updates). I have rebooted and nothing else is running except iTunes and it is still choppy. Tried RealPlayer and Quicktime (standalone) and its chop
-
Change SAP BI Password from BO Client Tools / Infoview, SAP Authentication
Hi, We are using SAP BI BO Integration Kit (BO XI 3.1, SAP BI 7.0) & able to use SAP BI Queries with WebI, Xcelsius etc. For a user group, we would be providing only Infoview access (using SAP Authentication). This means we would not want to install
-
Error acccess secure sight from a stand alone client using mutual Auth
Dear Forum, Please help me in fixing the error. Here is what I am doing I created my system cert using key tool and placed it in cacerts. Sent the CSR to the CA. Got the *.ser from CA. Imported the *.ser into cacerts truststore. Now created a standal
-
Hi experts, My client is having an integration with a Warehouse Management System. Obviously, SAP Business One is going to be back-end. Our job is to suck in all the transactions occurred from the front-end system. Here is the requirement and the pro
-
Failed in JMF diagnostics in netscape browser 7
I installed J2sdk 1.4.3 and jmf2.1.1e in Redhat Linux 7.3 and following their installation instruction to set up some environment variables. However I encountered two problems in configuring JMF. One is that when I configured the jmf-2_1_1e-linux-i58