Process chain sequence change

Dear all,
I want to cahnge the sequence of the processes in my main process change i want to shift one activity above the other if i make changes and transport those changes to production then will it generate error in previous logs. Is it right to do so please I need help.
Abhijit

Hi Abhijit Redgaonkar
It wont effect to u r previous logs based on the new changes transport.
How ever make sure about the sequence .like generation of PSA and dtp and
before that dlete index process..
Hope itz Helps..!
Regards
R M K
**Winners don't do different things,They do things differently...!**
> Dear all,
>
> I want to cahnge the sequence of the processes in my
> main process change i want to shift one activity
> above the other if i make changes and transport those
> changes to production then will it generate error in
> previous logs. Is it right to do so please I need
> help.
>
> Abhijit

Similar Messages

Changes are not getting reflected in Process Chain after changes.

Hello,
I have modified a Process Chain in Development environment. I have created one new infopackage and included it in the process chain. I have also added two new change run variants in the process chain. I have collected the process chain and infopackage in a transport request and transported it to integration environment.
Transport request has reached successfully in integration but the changes in process chain are not getting reflected. The infopackage has reached to integration after transport.
I need some suggestion on this.
Regards,
Sanjay

Hi Sanjay.......
R u in Display mode..........click on Change mode...........
If you can see the chain in Change mode............then ur process chain is imported in in-active version..........
U can try activating it manually or re-transport the active version..........
Regards,
Debjani......

Process Chain behavior changed after SP upgrade

Hi all, we've recently updated SP from SAP_BW 700, SAPKW70016 to SAPKW70021.
We realized about a particular process chain behavior:
We have many process chains configured to execute the next step "Always" (whatever it happens with the previous process).
This is the situation which changed:
BEFORE the upgrade:
If error raises on a process, this one remains "red" but the subsequent processes continues.
Once repaired (repeat/repair from the PC) the "crashed" process it is updated to "Green" status.
AFTER the upgrade:
If error raises on a process, this one remains "red" but the subsequent processes continues.
Once repaired (repeat/repair from the PC) the "crashed" process it is updated to "Green" status.
The remaining processes are executed once again (a new branch is generated). <- This is different
I want the "BEFORE the upgrade" behavior to keep working as always.
Do you know if there's some OSS note or tips of configs available to set this as my needs? (we have found the OSS Note 1398868 and implemented it, but the "effect" is not as we should expect for this case in particular).
I hope you can help. Thanks in advance and best regards,
Bernardo

I've found the OSS note: Note 1473491 - Chain not continued with termination and "ALWAYS" link; delivered with "SAPKW70025" corrections. It seems to be solving the issue I've originally mentioned. I'll perform some tests on this and update.
Regards,
Bernardo

Process chains node change

Hi All,
Please let me know how to change a process chain from "not assigned node" to desired node.
Your help is appreciated.
regards
raveena

Hi Raveena,
Please see how to do this from the following thread:
Re: Change the Directory of a Process chain.
Hope this helps...

Process chain Schedule change

Hi,
I have process chains in which there is one info packages. I have changed the Schedule from once in a day to twice in a Day. But after that Process chain is not executing the infopackage. then I have changed the schedule in the infopackage and clicked start. After that I have changed the Infopackage to Start immediate and save the infopackage and came to process chain and again activated and scheduled but when I go to the info package it is still in the schedule mode. Previously this process chain is working fine but now it is not executing.   This contains two programs also. Please suggest me in this.
Thanks
naveen

Hi Naveen,
   Goto process chain and double click on start routine and specify the start timing make it periodic for evry 12 hours.
   Execute process chain, you can see as scheduled only. According to specified schedule times chain will be triggered.
Hope it Helps
Srini

Process chains Server changes

Hi,
Guys this is basis question but If you have ideas to change server information for Process chains.We are having problems running process chains.Its showing old server info we have done refresh few days back.Need to change server info for all the chains in Mass not one by one its hectic process...
Please advise if anyone came across similar kinda problems..
Regards,
Andy

Hi Srikar,
RSTPRFC creates a destination into the BW-standard-client with the BW-Background user (usually called BWREMOTE or ALEREMOTE).
This destination then is used to activate the chain in the BW-standard client remotely from the client 000.
Please refer to SAP Note 659160 for further details.
Hope this helps,
Colum

Process Chain Attribute Change Run

Hi Experts,
I am working BI 7.0 version, I am try to run Process chain showing warning Error in Infopackage level, Please find the below Error Message:
A type "Attribute Change Run" process has to follow process "Execute InfoPackage" var.ZPAK_4DLO5GB778XTBBM57040KMRW4 in the chain
Please provide me solutions, how to solve this issue, Please ASAP.
Thanks & Regards,
Bharathi.

Hi All,
Thanks a lot for ur assistance.
Thanks & Regards,
Bharathi.

How to delete old schedule time of process chain after changing

I am try to change the schedule time of process chain on production but after changed the old schedule is still working (i.e. every day on 7 am I want change it to 6 am only) ,one process scheduled two time.
I want only last changed. How to remove the older one?
Thanks

hmm wierd...one more thing check if this process chain get trigger by anyother process chain by some abap program or any.
Check the table rspcchain to know if it has any meta chain or not. IF not follow the below steps :
make your process chain trigger based upon the event. Follow the below step.
1.SM64 ---> Create event -
> come to your process chain -> maintain the start variant -> event base---> give that event name here.Now we will be require to create the job which will trigger this event for this.
2.Let us take the below PC as example;
ZL_TD_HCM_004 -- This PC is running after event u2018START_ZL_TD_HCM_004u2019
3.Go to T Code: SM36 Here we define the Background job which will be available in SM37 after saving it.
4.It will ask for ABAP Program to be entered. Give it as Z_START_BI_EVENT and Select Variant from the list. (Based on Process chain, you can select it)
5.Then select Start Conditions and give the start time of process chain. and select periodicity.
6.Save the newly created job in SM36.It will be now available in SM37.
This should solve your problem now .. have fingure crossed
Thanks,
Deepak
Edited by: Deepak Machal on Dec 14, 2011 8:20 AM

Correct Process Chain Sequence

Hi, I was reviewing some SAP Help on Process Chains and noticed that the Sequence Graphic they provide for Process Chains does not include the very import step of "Compression" (see the link below)
Does anyone think this should be in there or is there a reason it is not included?
Thanks for your opinions.
http://help.sap.com/saphelp_nw04/helpdata/en/8f/c08b3baaa59649e10000000a11402f/content.htm

Hi
Compression is also one of the important task in Info Provider Administration. Once you do compression, you can not do request based deletion in Info Cube.
Lets take a situation, after one week or 10 days you found one request was wrongly loaded to your cube. If you compress your cube daily, then you have to go for selective deletion which difficult activity.
for this reason, generally compression will be performed after 15 days or 1 month.
It again depends on how much data you are getting daily as delta, because if you have huge uncompressed data in your cube this will decrease the report performance.
Regards,
Venkatesh

Changes in production in process chain

Hi sdn
when I 'm making changes in the production to the process chain, the changes are done but when I'm activating it ,it is saying changes can not allowed invalid call sequence action cancelled
rubane

Hi,
Can you please follow the below steps:
Go to RSA1 -> Transport Connection --> Object Changeability
Each Object Type has 3 states:-
1) Not Changable
2) Changable Original
3) Every thing Changable
1) Not Changeable does not allow you to change an object (local or transported).
2) Changable Original allows you to create objects as well as to change those in the originating system.
3) Every thing changable allows you to change the transported objects as well in addition to the locally created objects.
What I suspect is Object Type RSPC (and RSPT) has been set to Not Changeable / Changeable Original in the Production system.
In that case, simply right click on the Object Type RSPC (and RSPT) -> Select Everything changeable.
This should allow you to activate the changes in the Process Chains.
Thanks,
Subhajit.

Process Chain - changing the node

Hi,
I have created a Process Chain for loading data into 0FIAP_C03. This chain has got created under "Not Assigned" Node.
I want to move this Process Chain to "Finance" Node. How can I make this possible ?
Regards,
Amogh

open your Process chain in Change mode > Selcect Process chain (from the Menu)> Attribute --> Display Components Select your Finance node form the dropdown and then Activate the Process chain
Now refresh , you can see the Process chain moved from Not assigned to Finance Node.

Change in the model of Process chain and its impact

Hi,
We have lot of infopackages included in the Process chains which has the processing type as "PSA only and then update subsequently in data targets".
Now i had changed some of the infopackages to the processing type as PSA and then into the data targets option!
But in the process chain the process type update from PSA is still existing!
I am not sure whether i should remove this process type in process chain after changing the process type in the scheduler
Any ideas?
Raj

hi raj,
do not remove the PSA & update step as it is a fulproof method for the data load.
if u'll try to remove and activate the Process chain it will show warnings but still activate the chain.
the data load sometimes may get loaded and other times it may not reflect in the data target although the step will be green in the process chain.
regards,
arvind.

Process chain questions

Hai All,
           I designed a process chain with data flow like this:
R/3>ODS1>ODS2>Cube.
The process chain sequence is:
Start>>Load data>>activate ODS1 data>>load data to ODS2>>activate ODS2 data>>delete index>>load data to cube.
           My process chain is working and the data loads are good. But I am getting warning messages for all three variants "activate ODS1 data>>load data to ODS2>>activate ODS2 data>>"
The message for the two activation variants is as follows:
A type "Update ODS Object Data (Further Update)" process has to follow process "Activate ODS Object Data" var.ACTIVATEZMONDET in the chain
Message no. RSMPC016
The message for the loading variant is as follows:
A type "Activate ODS Object Data" process cannot precede process "Execute InfoPackage" var. ZPAK_3YF4Q8R0RSHTDJH74WZOAXBC6 in thechain
Message no. RSMPC013
           The version I am working on is BW 3.5. My question is it ok to have these warning messages or do I need to do anything else?
Thank you.

Hi Visu,
If you data loads are running fine, you can ignore the warning messages. The system tries to warn you in case it suspects that a process is missing from the chain of events required...but there are more than one ways to achieve a load. If the data volume to be loaded to the cube is not very high, like it is just a daily delta, you can even go ahead and remove the index deletion process.
Hope this helps...

Delta loading and Process chain BI

Hi experts,
Two Issues.
1)As i am loading FI data into dso through a process chain which includes Start process>Delta infopackage(which gets data upto psa)>Delta dtp-->Datastore activation.
But infopackage is picking up deltas but DTP is picking up all the previous records plus deltas.
100 records -- 1st day throught Intialization of Delta with Data Transfer
2 delta records -- 2nd day
But DTP is picking up 102 Records on the 2nd Day, which means it is also picking the old records as well.
The DSO must have just 102 records but it is having 202 records.
2) A process chain in running daily as scheduled , but I rescheduled with new scheduling options without deactivating the Process chain.
My Question is
Will the Process chain run for the OLD and the New Schedule or
Is it going to run for new schedule or old one?
or
will I face any Problem because I did not deactivate and made changes to the Change.
Please help me in this matter.
Thanks in advance.
Bhadri.

First query:
I believe that u have used FUll update type DTP is instead of the Delta DTP.. Please cross check the Update mode of the DTP once.
To resolve this issue, delete the total content of the DSO as u have Init and delta loads in PSA. And then using the Delta DTP of the Process chain, load the data. It will extract the total cotent what ever is there in PSA, and later the same DTP will act as the Delta type and will pick the data from the New request of the PSA.
Second Query:
Its always suggested to deschedule the process chain before changing the schedule timings. When ever u do this type of scheduling, just check how many number of JObs available in Schedule mode, if u can see more than one, then delete the older one and keep the new one as it is.
But I always suggest you to deschedule the process chain and reschedule PC with the new timings and then activate the same.
Thanks
Assign points if this helps

Process LOADING has no predecessor in Process chain

Hi Experts,
I have copied Process chain with all process and I have included new steps in process chain like change log deletion and delete & create index(the process chain has data mart functionality which mean that, first it load to DSO and then from DSO it load to Cube) so after Start variant I have included Change log deletion Step and then after Activation of DSO I have included delete Index step and then after IP load to Cube I have included Create Index step therefore which is the PC in the form of
1) Start Process
2) Change log deletion
3) Load IP (Target to only PSA)
4) Read PSA and Update to data target (DSO)
5) Activate the DSO
6) Delete Index
7) Load IP (Data mart from DSO to Cube)
8) Create Index
9) Delete request from PSA.
all process are connected but when I activated I was getting error message that Process LOADING has no predecessor
so pls advise me what went wrong or what should I do.
Note
1) load type is full load and I was in BI.7
2) there is no DTP engaged

Hi
during creation of modification of chain you must have deleted few links to Loading step.
Go to settings-> Default chains and see if autosuggest is on, if it is on this might have cause this.
To Resolve this problem go to edit mode of chain and then go to View->Detail view on
now you will be able to see unlinked loading step.
Delete unlinked and un necessary steps from here and reactivate chain.
Hope this works
Regards
Sudeep

Process chain sequence change

Similar Messages

Maybe you are looking for