Process chain start by dialog process
Hy Expert, i have a serious problem.When i schedule a process chain , it start by dialog process. What i do for start process chain by background process?
Thank's a lot.
Andrea
HI
You could do the following:
1) Create an event variant (i think it was SM63 or something like that)
2) write a short abab program that raises an event (see example)
*& Report start chain
REPORT start chain.
CALL FUNCTION 'RSSM_EVENT_RAISE'
EXPORTING
i_eventid = 'your created event'
i_eventparm = 'your variant'
* EXCEPTIONS
* BAD_EVENTID = 1
* EVENTID_DOES_NOT_EXIST = 2
* EVENTID_MISSING = 3
* RAISE_FAILED = 4
* OTHERS = 5
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
3) Scedule your chain by event and activate it (you need to make it periodical to run severeal times).
4) Scedule the program.
Hope this helps.
Regards,
Minima
Similar Messages
-
How to know the process chain start time & end time?
HI all .
how to know the process chain start time & end time at the table level as well as in RSPC level .
regards,
SrinivasHello,
there is a program "/ssa/bwt" which will help you to know the exact time when the process was started and ended.
but the thing is you have to provide name of the process chain with the date at which it was executed.
another option is - you can double click on start process and on the last process of the chain.
here, you will get both the timings... Start time of the start process will be the start time of your PC and end time of the last process in the chain will be end time of your PC.
Hope this will help you. -
How to know the process chain start time and end time
Hi Experts,
How to know the process chain start time and end time .
Thanks in advance
Regards
Gutti
Edited by: guttireddy on Feb 23, 2012 11:30 PMHi Reddy,
You may find the run time of a PC using below steps.
1. Call SE38 > /SSA/BWT > Execute > Enter your PC , choose the date and time > Execute. Here Run-time of a PC is displayed. (or)
2. Call RSPC1 > Enter your PC > Execute > Goto Log view > Right click on the start Variant > Displaying Messages > Note down the start time in Chain Tab. Now Right click on the last Process type of the PC > Displaying Messages > Note down the End time in Chain Tab. The Difference b/w start time and end time gives the Run-time of your PC.
Hope this helps.
Regards
Sai -
Process chains start after transporting
Hello friends,
since we've upgraded to NW7 we encounter the problem that process chains start automatically after transporting them from test system to productive system. This ist very unpleasant!
Does anybody encounter this problem too? Ist there a system settig, which disables the automatic start of process chains after transporting?
thnx in advance!Hi,
Process chains execute when transport request imported :Note 1233327 - Correction: Scheduling of immediate start for transport
In order to stop Process Chains from being scheduled immediately upon import, insert the following into the RSADMIN table with ABAP program
SAP_RSADMIN_MAINTAIN:
Object = NO_TP_SCHEDULE_IMMEDIATE
Value = X
After this change is made to the RSADMIN table, you can import Process Chain transports where the Start process variant has it set to be scheduled immediately.
This entry can be modified in the future by the same ABAP program and just changing the value of Object to space.
rgds, -
Trigger Tcode in ECC as soon as process chain starts in BW
Hi Experts,
I need some help on how to trigger a transaction code in ECC as soon as the process chain starts in BW.
I need to give some selections in the ECC like company code, period and year to fetch the report in ECC . I use it for reconciliation of data between ECC and BW.
Pointers if any would be really helpful.
A step by step guide, presentation,doc would be really appreciated.
ThanksThanks for the reply ravi but what i am looking for just opposite of whats explained in the link.
I am looking for the info on how to execute/trigger a transaction code in ECC as soon as the process chain starts in BW ie BW to ECC
the doc explains how to trigger a process chain in bw from ECC.
Thanks -
Dear All,
We have transported a process chain, however, while trying to change the start condition of the process chain starter, it is not allowing us to change the start condition. How to resolve this issue ?
Thanks,
SamHi,
Are you trying to change the scheduling of the process chain starter or are you trying to change the starter itself?
If you are trying to change the scheduling then you can do it and it might ask for Transport request, you can simply save the same in transport for the first time.
If you are trying to change the start process then you can follow the standard procedure as to bring the changes from D to Q and then to P.
If the process is enabled for the Objest Changeability in the transport connector then you can be able to change the process chains in the target system as well after storing the same in the transport.
Hope this helps.
Murali -
Is it possible to run process chain from the certain process/point?
Hello
Is it possible to run process chain from the certain process?
How?
ThanksHello,
yes it possible! use the following steps.
1. Goto the process which you want the chain to start from.Goto display messages>> Chain tab. In the generated instance note the variant and instance.
2. Goto table RSPROCESSLOG and give variant and instance and get logid details.
3. t codese37>> run FM RSPROCESSFINISH.
4. give the deatils u have got in RSPROCESSLOG table here and say execute.
This will solve ur problem.
Hope this helps!
Reg
Deepmala -
Scheduling of a process chain in two meta process chains
Hi,
( Meta process chains - X, Z
X - runs at 2 a.m. daily
Z - runs after every two hours daily from 9 a.m. to 10.30 p.m
Process chain - Y is to be included in X & Z)
There is a Meta process chain X which is scheduled for 2 a.m. daily. This meta process chain contains another
process chain Y.
I want to schedule another Meta process chain Z which executes after every two hours daily. Now I want to include process chain Y in Z, with the condition that if system time is 11 a.m. or later than it only then it should be scheduled.
Since this process chain is contained in Meta process chain X, its start variant
has Immediate Start selected. I don't want to change this start variant.
Is there any option or event through which this can be achieved?
Thanks & Regards,
ManishaYou need a program to trigger event (using function module BP_EVENT_RAISE). You can include this program and variant only in the process chain as a ABAP process type.
The program will have a condition based on the time (you can use parameters to make it dynamic), when ever the specified time condition will be satisfied, it will trigger the event.
So whenever you will execute the process chain X, everytime ABAP process type will also be executed. But the event will be raised only at a specific time, so is it process chain Y. Therefore it will not affect process chain X execution. -
Process chain failed at AND process type ?
hi all .
Process chain failed at AND process type ?
and it is giving message Job cancelled after system exception ERROR_MESSAGE .
what is the reason & solution .
regards ,
srinivas ,Hi,
That depends on the system behaviour... There is no issue in that... You can repeate the process.. If there is no repeat option available then you can on the detail view.. there is a chance that you will get a repeat option there.. If not then copy the chain.. remove the loaded process and add one starter chain an continue the chain in immediate mode...
Regards
Sajid khan -
Process chain: scenario on Interupt process
Hello,
currently I'm exploring a BI in NW2004s.
In the area of process chain I found a process type
called Interrupt process.
Can someone give we a scenario on that process type?
Regards & Thanks,
GuidoHi...
go to RSPC and now click Process Types button--under General Services node is interrupt process
Application scenario:"
Apply multiple start conditions in a process chain
With the process type Interrupt, you can interrupt the processing of a process chain until a given condition has been satisfied. In this way you can, for example, define conditions that need to be satisfied in addition to the start condition defined in the start process so that the entire process chain or parts of it can be processed."
refer thread:
http://help.sap.com/saphelp_nw70/helpdata/en/58/9c6c4251e4c153e10000000a1550b0/frameset.htm -
How to send a email as soon as the process chain starts
hi,
i feel i am doing the right thing . but i couldn't get the mail.
i have created the process chain.
and attached the message to the start of the chain.
i had inserted the subject to the message and the recepient id is attached to the addresse.
any thing else to be done.
every thing is connected.no need to do the settings as we were getting mails for the other chains.
please do reply in detail.
regards,
soumyaEnsure proper settings done in SCOT.also see after going in SCOT -->CLICK on JOB then see whether any job is scheduled to run to send mails or not ?if yes after what time period it runs.see this.
else check this link
Creating messages in Process chains -
How can I realize a period process chain start: the 1st to 3rd day every?
Hi,All
I want to set a start in a process chain as the following:
a period value: the 1st to 3rd day every month
How can I realize it ? Thanks.
Best Regards
Jiande DingHi Jiande Ding
create original chain as a Meta chain.
create the another process chain with immedaite in start varaint..
and put abap step in that PC after process chain..
put this below code in that abap program.
DATA: wwdate like sy-datum,
WWDAY(2).
wwday = sy-datum+6(2).
IF WWDAY EQ '01' OR WWDAY EQ '03'.
CALL FUNCTION 'RSPC_API_CHAIN_START'
EXPORTING
I_CHAIN = <ur meta chain tech.name>
ENDIF.
Edited by: shanthi bhaskar on May 5, 2009 4:44 PM -
Process Chain starter in Production
I transported a process chain in to Prod but when I click on the start process, it doesnt show me anything. Everything else looks perfect. What is the problem?
Hi Fran,
Some time variants are not collected automatically in a request you have to manually collect them .
Hope this will help you
Suneel -
Hi Guys.
I have a process chain and a start variant, but then when I transported. It seems not be transported the variant. CAn you please help me with this?
Regards,
Iván.check in forum, you will find lot of threads...
1. Goto RSA1 --> Transport Connection.
2. select objects by Object Types.
3. You can see "Process Chain"
4. double click on it. inthat select your process chain. go with transfer selection.
5. Your process chain will transferred to right hand side. check the Grouping options on the right side tool bar. go with "Necessary Objects" under Grouping.
6. you can see all the list od variants in that. go with transport icon on right side tool bar. you need to make sure all process variants collected in this.
Nagesh Ganisetti. -
Process chain start variant repaired in production
Hi
I took up tasks from our previous Bi team
I am told we have followed the regular process of DEV -- QA and PROD for all process chains
I see a strange observation in Production for a particular process chain in its start variant
It is shown to run as immediate in the start variant, in the detail view , but
it runs scheduled at a certain time every day, I can see the scheduled jobs released
I see that in production it is attached to a request in repaired status
process chain works fine and triggers regularly
I am unable to understand why it shows as immediate in the start variant and however runs on a regular scheduleHi
1) why does the start variant of this META chain show up as immediate, when it is actually running scheduled ?
are you able to see the chain in green color(scheduled state).
when you right click on start process chain step and you have option to select display scheduled job?..if yes check the start condition by double click on job.
2)Does the change directly in production, could have brought in this behavior?
We can change the start condition of process chain, when right click on start variant and select display variant..here you can see last changed name
3) If , I re transport the whole META chain from DEV-QA --PRD , will the start variant change or will it cause trouble considering the fact that the start variant was repaired in PROD directly.
No need to transport again, if you know the start condition of process chain, edit the same in prod and save it.
Regards,
Venkatesh
Maybe you are looking for
-
Running a .swf (Flash file) in JMF
Hi, In my application i have to run .swf(Flash file) file. I have to do it using Java API. Can i do it using JMF.If so, how to do it. Is there any other API available to run .swf files in java. Thank you in advance.
-
Servlets have been working for months. Suddenly, I'm getting this error (see below) as soon as I try to hit a servlet. The startup process looks normal. I've re-installed WL v 4.0.3 several time, gotten the license in pl
-
Download calcalator app to mini ipad
how to download calcalator to mini ipad
-
Here's the problem log: Interval Since Last Panic Report: 20998 sec Panics Since Last Report: 6 Anonymous UUID: 3A61E6C0-CB97-4FB4-808C-F0A408A7E642 Sun Jul 29 09:04:19 2012 panic(cpu 1 caller 0xffffff8000cb7b95): Kernel
-
Which modules of oracle apps have reports and forms?
which modules of oracle apps have reports and forms? Do I need to have strong programming knowledge to learn these? Plz try to respond as I need to get started with the traiining asap.