Process Chain - Start Variant

Hi Guys.
I have a process chain and a start variant, but then when I transported. It seems not be transported the variant. CAn you please help me with this?
Regards,
Iván.

check in forum, you will find lot of threads...
1. Goto RSA1 --> Transport Connection.
2. select objects by Object Types.
3. You can see "Process Chain"
4. double click on it. inthat select your process chain. go with transfer selection.
5. Your process chain will transferred to right hand side. check the Grouping options on the right side tool bar. go with "Necessary Objects" under Grouping.
6. you can see all the list od variants in that. go with transport icon on right side tool bar. you need to make sure all process variants collected in this.
Nagesh Ganisetti.

Similar Messages

Process chain start variant repaired in production

Hi
I took up tasks from our previous Bi team
I am told we have followed the regular process of DEV -- QA and PROD for all process chains
I see a strange observation in Production for a particular process chain in its start variant
It is shown to run as immediate in the start variant, in the detail view , but
it runs scheduled at a certain time every day, I can see the scheduled jobs released
I see that in production it is attached to a request in repaired status
process chain works fine and triggers regularly
I am unable to understand why it shows as immediate in the start variant and however runs on a regular schedule

Hi
1) why does the start variant of this META chain show up as immediate, when it is actually running scheduled ?
are you able to see the chain in green color(scheduled state).
when you right click on start process chain step and you have option to select display scheduled job?..if yes check the start condition by double click on job.
2)Does the change directly in production, could have brought in this behavior?
We can change the start condition of process chain, when right click on start variant and select display variant..here you can see last changed name
3) If , I re transport the whole META chain from DEV-QA --PRD , will the start variant change or will it cause trouble considering the fact that the start variant was repaired in PROD directly.
No need to transport again, if you know the start condition of process chain, edit the same in prod and save it.
Regards,
Venkatesh

How to know the process chain start time and end time

Hi Experts,
How to know the process chain start time and end time .
Thanks in advance
Regards
Gutti
Edited by: guttireddy on Feb 23, 2012 11:30 PM

Hi Reddy,
You may find the run time of a PC using below steps.
1. Call SE38 > /SSA/BWT > Execute > Enter your PC , choose the date and time > Execute. Here Run-time of a PC is displayed. (or)
2. Call RSPC1 > Enter your PC > Execute > Goto Log view > Right click on the start Variant > Displaying Messages > Note down the start time in Chain Tab. Now Right click on the last Process type of the PC > Displaying Messages > Note down the End time in Chain Tab. The Difference b/w start time and end time gives the Run-time of your PC.
Hope this helps.
Regards
Sai

Process chains start after transporting

Hello friends,
since we've upgraded to NW7 we encounter the problem that process chains start automatically after transporting them from test system to productive system. This ist very unpleasant!
Does anybody encounter this problem too? Ist there a system settig, which disables the automatic start of process chains after transporting?
thnx in advance!

Hi,
Process chains execute when transport request imported :Note 1233327 - Correction: Scheduling of immediate start for transport
In order to stop Process Chains from being scheduled immediately upon import, insert the following into the RSADMIN table with ABAP program
SAP_RSADMIN_MAINTAIN:
Object = NO_TP_SCHEDULE_IMMEDIATE
Value = X
After this change is made to the RSADMIN table, you can import Process Chain transports where the Start process variant has it set to be scheduled immediately.
This entry can be modified in the future by the same ABAP program and just changing the value of Object to space.
rgds,

How to know the process chain start time & end time?

HI all .
how to know the process chain start time & end time at the table level as well as in RSPC level .
regards,
Srinivas

Hello,
there is a program "/ssa/bwt" which will help you to know the exact time when the process was started and ended.
but the thing is you have to provide name of the process chain with the date at which it was executed.
another option is - you can double click on start process and on the last process of the chain.
here, you will get both the timings... Start time of the start process will be the start time of your PC and end time of the last process in the chain will be end time of your PC.
Hope this will help you.

Trigger Tcode in ECC as soon as process chain starts in BW

Hi Experts,
I need some help on how to trigger a transaction code in ECC as soon as the process chain starts in BW.
I need to give some selections in the ECC like company code, period and year to fetch the report in ECC . I use it for reconciliation of data between ECC and BW.
Pointers if any would be really helpful.
A step by step guide, presentation,doc would be really appreciated.
Thanks

Thanks for the reply ravi but what i am looking for just opposite of whats explained in the link.
I am looking for the info on how to execute/trigger a transaction code in ECC as soon as the process chain starts in BW ie BW to ECC
the doc explains how to trigger a process chain in bw from ECC.
Thanks

Process chain starter

Dear All,
We have transported a process chain, however, while trying to change the start condition of the process chain starter, it is not allowing us to change the start condition. How to resolve this issue ?
Thanks,
Sam

Hi,
Are you trying to change the scheduling of the process chain starter or are you trying to change the starter itself?
If you are trying to change the scheduling then you can do it and it might ask for Transport request, you can simply save the same in transport for the first time.
If you are trying to change the start process then you can follow the standard procedure as to bring the changes from D to Q and then to P.
If the process is enabled for the Objest Changeability in the transport connector then you can be able to change the process chains in the target system as well after storing the same in the transport.
Hope this helps.
Murali

Process chain program variant will not change from yellow...

Hello,
<b>Problem:</b>
I have a process chain that has two branches with 3 process chain variants on each leg in a parallel configuration. The process chain variants run different program variants. I am using variant object called "ABAP Program with Success/Failure " which can have a yellow, green, or red status and has status arrows that can be either red or green that connect to other process chain variants. The program executed with these variants is a customized BPS UPC_BUNDLE_EXECUTE program. When I run this PC the first variant on each leg usually hangs indefinitley on the yellow status. In the Backg tab log (double click PC variant in Log View) I can see the various SQL code that was ran. The last line of the log is an SQL-END:... Sometimes it will get past the first 2 varaints and hang on the next set of 2. Other times it will just hang on the last variant of one leg. It is very sporadic.
<b>What I have observed and tried:</b>
If I check my SM51 for the server the chain is running on I can see that the program in question is not running. If I run the same program through SE38 that runs via a PC variant it runs sucessfully in an appropriate amount of time. If I kill the process that has been running indefinitley through SM51 the process chain variant will go from a yellow status to a red as expected.
I changed they way I ran the programs from running in parallel in 2 legs to running all of them in one leg serially. That did not work. At least one program variant will hang on the yellow status.
I replaced all the variants using "ABAP Program with Success/Failure" to "ABAP Program" which has a red/green status but no red or green arrows, but black coming out of the variant forcing it to move down the chain on a sucess or failure. The process chain variants also hung in the yellow status using the "ABAP Program" variant.
I have tried starting the process chain using both "Direct Scheduling" with "Immediate" and "After Event." I have also kicked it off using "Start Using Meta Chain or API" so it was functioning as a sub process chain. Programs were still yellow in every case without changing to red or green.
I created new process chain variants for every single program/variant that I am using. Still no luck.
I have tried removing the chain from the schedule and re-activating and re-running and still no luck.
Thanks in advance,
Gary Martins

bump

Process chain start by dialog process

Hy Expert, i have a serious problem.When i schedule a process chain , it start by dialog process. What i do for start process chain by background process?
Thank's a lot.
Andrea

HI
You could do the following:
1) Create an event variant (i think it was SM63 or something like that)
2) write a short abab program that raises an event (see example)
*& Report start chain
REPORT start chain.
CALL FUNCTION 'RSSM_EVENT_RAISE'
EXPORTING
    i_eventid                    = 'your created event'
    i_eventparm                  = 'your variant'
* EXCEPTIONS
*   BAD_EVENTID                  = 1
*   EVENTID_DOES_NOT_EXIST       = 2
*   EVENTID_MISSING              = 3
*   RAISE_FAILED                 = 4
*   OTHERS                       = 5
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
3) Scedule your chain by event and activate it (you need to make it periodical to run severeal times).
4)   Scedule the program.
Hope this helps.
Regards,
Minima

Process Chain starter in Production

I transported a process chain in to Prod but when I click on the start process, it doesnt show me anything. Everything else looks perfect. What is the problem?

Hi Fran,
Some time variants are not collected automatically in a request you have to manually collect them .
Hope this will help you
Suneel

How to send a email as soon as the process chain starts

hi,
i feel i am doing the right thing . but i couldn't get the mail.
i have created the process chain.
and attached the message to the start of the chain.
i had inserted the subject to the message and the recepient id is attached to the addresse.
any thing else to be done.
every thing is connected.no need to do the settings as we were getting mails for the other chains.
please do reply in detail.
regards,
soumya

Ensure proper settings done in SCOT.also see after going in SCOT -->CLICK on JOB then see whether any job is scheduled to run to send mails or not ?if yes after what time period it runs.see this.
else check this link
Creating messages in Process chains

Process chain Activation Variant failed

Dear Gurus
In BI7 executed a process chain,in this ods activation is in 4 th step,turned in to red,i repeated and got executed.
Questions:
1.I checked in DSO all data got activated,only in process chain showed red status....how it is possible.
2.Eventhough 4th step turned in to red,below all (5,6,7...th steps) went through,how it happened,if some variants failed means next variant should not get executed?
3.When i did repeat it thrown ABAP debugging screen,i executed and went through well,ods activation variant became green.
When i was trying to see display message,it is empty no error message.
Root cause analysis i should give...pls how and where to do the analysis.....
Thanks and regards
T.Gadhatharan

Hi,
1.I checked in DSO all data got activated,only in process chain showed red status....how it is possible.
In the ODS Activation Process, is there any other ODSs existed for activation?
2.Eventhough 4th step turned in to red,below all (5,6,7...th steps) went through,how it happened,if some variants failed means next variant should not get executed?
After the 4th Step, the further processes executed means, they might have put the settings as Success or failure of the predecessor process it can through the further 5th, 6th and 7th processes.
3.When i did repeat it thrown ABAP debugging screen,i executed and went through well,ods activation variant became green.
Check for short dumps ST22.
Hope it helps.
Veerendra.

How can I realize a period process chain start: the 1st to 3rd day every?

Hi,All
I want to set a start in a process chain as the following:
a period value: the 1st to 3rd day every month
How can I realize it ? Thanks.
Best Regards
Jiande Ding

Hi Jiande Ding
create original chain as a Meta chain.
create the another process chain with immedaite in start varaint..
and put abap step in that PC after process chain..
put this below code in that abap program.
DATA: wwdate like sy-datum,
          WWDAY(2).
wwday = sy-datum+6(2).
IF WWDAY EQ '01' OR WWDAY EQ '03'.
   CALL FUNCTION 'RSPC_API_CHAIN_START'
EXPORTING
    I_CHAIN             = <ur meta chain tech.name>
ENDIF.
Edited by: shanthi bhaskar on May 5, 2009 4:44 PM

Process Chain Missing variant REMOVED

every time i go to RSPC and open any process chain i got a message " Varaint &0000000000526 does not exist" , when i click more help
Variant &0000000000526 does not exist
Message no. DB612
Diagnosis
You selected variant &0000000000526 for program RSPROCESS.
This variant does not exist.
Procedure
Correct the entry.
i dont want to know to go to each process chain to figure this out, is there a program that can find this out for me or an easier way to figure this out?
<REMOVED>
thank you
Edited by: Moderator on May 1, 2008 8:29 AM

Do you have any cancelled batch jobs?
Try this. Use SM37 and put in BI_PROCESS* for job name and * for user name and look for any cancelled jobs.
If there is, click on the job and look at the Step of the job. Here you will see the ABAP program RSPROCESS and the Parameters will be that SAP assigned number. Click on the Step and from the top select Goto --> Variant. The next screen will show show the associated variant within the process chain that this job is executing for.
Does this help?

Process chains data load

Can any body help in data scheduling issue
I am able to load data manually the issue is i selected some of the datafields in InfoPackage data selection field and saved .
i put this Ip in the process chain.now the issue is i don't to load data immediately .. say i want to load the data after 3 hours for this i want to set the time .i did set up in the process chain start variant
but it is not working can anybody give me the steps in detail please....
Advance thanks
Kelvin sam

Hi Kelvin,
This should work using the start variant in the chain but of course the infopackage variant will only run if the process
before was successful (depending on your settings with the links joining the processes in the chain).
If you right click on the start variant, select 'maintain variant' , on the next screen make sure 'direct
scheduling' radio button is flagged unless you are using a meta chain as starter process.
Click on 'change selections' button , on the next screen select 'date/Time' option and here
you can set the start date and time. You then need to save this setting , select save
and on the next screen save again. You then need to activate and schedule the
chain again.
If this still does not work can you check if there are errors messages generated in
sm21/st22 or in the process chain log.
Regards,
Des.

Process Chain - Start Variant

Similar Messages

Maybe you are looking for