Process Chain - Status Green but log says "Termination of chain "

Hello Friends,
One of the Steps in a Sub Chain of the Meta Chain shows the log as follows:
30.10.2009 05:20:28 Job started
30.10.2009 05:20:28 Step 001 started (program RSPROCESS, variant &0000000049485, user ID SCMREMOTE)
30.10.2009 05:20:35 Spool request (number 0000017553) created without immediate output
30.10.2009 05:20:35 Entire chain now has status 'G'
30.10.2009 05:20:35 Termination of chain has been reported to meta chain D6SBR9M64EV91ZX911UJI7K36
30.10.2009 05:20:35 Job finished
and the Step has changed to Green. So we normally assume that it has executed succesfully. Recently, there came this data issue. This step loads Open Sales Order data from a Cube to APO DP Planning area. Now few Open Sales Order Qty for a material are missing in planning area.
Does this step in the Process chain has executed Succefully or as the log says is it terminated? Though the step changes to green , were all the materials not loaded into planning area?
Please advice and suggest.
Thanks,
Chandra.

Hii
This log shows that chain has been successfully terminated. This is a common log
The missing of Open Sales Order Qty for a material may be due to other reason .
Try to get into more details for which Orders this has happened and check in the source system.
Thanks
Sonal...

Similar Messages

Service not visible in Service Registry but log says published successfully

Hi,
We have configured our PI7.11 system's registry as central registry. We have configured our ECC EHP4 system to publish the service and endpoint.
When we publish it, physical system is published, i can see it but I am not able to see the service or endpoints. Log says
service and endpoints are published successfully.
Please ignore it. When I search the detailed log, it says some config was missing.
Edited by: Praveen Babu on Mar 29, 2010 3:46 PM

Hi Dipankar,
I have already tested the service by the procedure you have mentioned.It is working fine from service browser window.
Is there anything else need to be done to use that service in CAF GP(some configurations etc)?
While creating CO, it is showing the service name and methods for caf.core but not for my Application.
Regards,
Piyush

** Message being processed - Queue status green colour

Hi Friends,
Many messages in our SXMB_MONI shows green color in the queue id column. It shows 'Message being processed'. All messages are in queue, still they are not delivered. Processing takes more hours. These messages are not EOIO queue. While we check this thru SMQ1 and SMQ2 it shows 'Running'. So, what could be the problem ...?
Kindly help friends, to solve this issue. (Points rewarded for helpful answer)
Kind Regards,
Jeg P.

HI,
QUEUE STATUS RUNNING BASICALLY MEANS THT
The first LUW of this queue is currently being processed. If a queue in this status hangs for more than 30 minutes, this may mean that the work process responsible for processing this LUW has been terminated. In this case you can activate this queue again. Note that activating a queue in status RUNNING may cause a LUW to be executed several times if this LUW is still being processed in the target system at that time. We therefore recommend a waiting time of at least 30 minutes before you reactivate the queue.
HOPE THIS WILL SOLVE THE PROBLEM
PLZ REWARDS POINTS
VIKAS

Idoc status green but data not posted correctly to destination system.

Hi,
Can anyone help me out with idoc problem that I am facing.
The problem has come out with outbound idoc.
The status of the idoc is green when it has been sent but the objects that has been sent with that idoc are not getting posted in the destination system.Some of them are posted correctly but some of them are not.
What may be the reason behind this.
Regards,
Rachana.

Good morning
What was the resolution here? We are siitng with the same problem, but IDoc's are correct, but data packet not processed.
Thanks, have a nice day
Cj

Network Diagnostics gives me all green, but Safari says no Internet connection

Whenever I awake my computer from sleep, it takes about a full minute or more (haven't timed it yet) before it will recognize my Internet connection. As soon as I open it, it automatically connects to my home network, but if I try to use the Internet in any way, I can't. Safari tells me I have no Internet connection. When I open Network Diagnostics as it suggests, I have all green lights. I can go all the way through Network Diagnostics, finish still with all green lights, and Safari still says no Internet connection. If I give it about a minute, I can reload the page, and everything will be fine…until I close the lid.
Any ideas? This is driving me crazy.
Other potentially helpful information:
I was away for the summer. Before I left, I did not have this problem. While I was away, I upgraded to Lion, but I didn't have this problem on any networks before or after the upgrade until I came back home. As far as I can tell, none of the other notebooks here (all Macs) have this problem. Weird, right? They are all running Snow Leopard or Leopard, though, come to think of it. So perhaps it is a combination of the network and Lion?

I've had that problem before, but when that was the problem, the computer was still trying to connect to the network and I didn't have green lights from Network Diagnostics. In this case, my computer connects instantly, I get all green lights from ND, and I still can't use the Internet for about two minutes. Everything looks fine in the network settings, green light on Wi-Fi, gives me an IP address, etc.
Is there another program besides Network Diagnostics that could tell me exactly where I'm not getting through?

Request status is Green,But no data is loaded into infocube.

Hi,
I have loaded the data from Flat File to Infocube. The status of the request is Green. But no records are added into infocube.
The data is available in PSA.

Hi Jen,
I had created DTP and scheduled it. There shows a request in infocube with status green but no records added.
I have checked in PSA , the data is present in PSA.
I am wondering why data is not uploaded from PSA to Infocube.

Make Process chain to green

Hi Experts,
Is there any program which makes the Process chain to green without re-running the whole chain again.
Thanks for the suggestions ...

Hi
If i am correct your delta IP is runnings second time..If yes, is the job in SM37 is in active state..?
If it is in active state..just cancel the active job in SM37, your PC will get stop there..just leave the PC there.
If you want to stop the PC, just cancel the job of active process type(which is in yellow) in SM37.
to cancel the job, follow the below steps
1)in SM37, you can find your IP request starting with BIREQ******
2)double click on job, then click on job details
3)here note down the server name and WPID (Work process ID)
4)now goto SM50--Select the required server
5)here search the job with WPID
6)select the job, in menu bar select "process" -- click on cancel with out core
Now come back to SM37, refresh you can see the request in cancel state and your PC will get stop
Regards,
Venkatesh

Process Chain status not becomeing green even if all loads are successful

Hi,
The porcess chain status is not becoming green even if all loads are successful. How can I make it GREEN.
One more doubt I have.
Suppose I have 6 processes in my process chain and the 3rd process failed. If I run the function module RSPC_PROCESS_FINISH will start loading from the beginging or from the failed process.
I wish to load from the failed process onwards..what should I do ??
Kindly give the details.
Bill

Using that FM.. u will be providing the Instance and Variant of the failed process.. and hence the reload will start from the failed process but not the entire chain...
In general the process status shud finish then or based on the link combination the change from one process to other will happen...
try to maintain a wait time between the process atleast 2 to 4 secs..
thanks
hope this helps..

Process Chain Status Red, DTP status yellow, DTP is green from inside

Hello All,
I have a problem where the Process Chain status is red, but the process(DTP) status is yellow.
When I right click on the yellow process there is no error message and the DTP is green in Process Monitor.
But the chain did not complete and the rest of the process steps are grey.
After 20 minutes the Process Chain ran again(automatically after new data arrived) and this time without errors and it went green.
My question is, how to proceed with the red Process chain and complete the further process and make it green.
Regards
Alex

hi,
There are scenarios where you need to change status of a process chain or a particular step in process chain.
You might need to change the status in the cases where we need mark these steps successful so that dependent steps get processed. There are other scenarios where one needs to change the status of a single step in the process chain or status of whole process chain.
Step by step instructions on change process chain status
1. Right click on the failed step in the process chain monitor and go to displaying messages
2. Go to u2018Chainu2019 tab and note down variant, instance and start date
3. Go to SE16 and the table RSPCPROCESSLOG and enter variant, instance and start dates from step 2 and note down log_id, type, variant, instance.
4. Go to SE37 transaction and execute the function module RSPC_PROCESS_FINISH and enter the values from step 3 and enter the new status u2018Gu2019 in status field and execute the FM
5. This sets the status of the process chain (PC)
After you set the status using the FM, go to the monitor screen of the process chain, you will notice the changed status. Now dependent steps in the process chain will start running
Thanks

Set process chain status to green despite an error

Hi everybody,
I've made a process chain with an ODS activation. If there's an error, an AND process comes with a message to users.
When an error occurs on the ODS activation, the process chain ends like I want but his status is red.
How can I do to set the status to green ? Is that possible ?
Thanks

Ok,
In that case it can be simplier than that.
You need after activation of ODS in your chain have two branches, one with error and another one with success.
In the case of the success the branch is connected to the rest of the chain and the rest of the chain will continue and remain green status for that chain as the overall result of the chain.
In the case of error the new branch is connected to a process that will always terminate with sucess. As an example you could create a variant for roll-up of aggregates of an Infocube. In these variant do not select any InfoCube and mark the option End Process Sucessfully if No Aggregates Exist. This will always force this process to OK, green status, and therefore will always end your chain as green status even when the ODS activation fails
Hope this helps.
Diogo.

TS4124 how do sync a book that I have added as music to itunes on my iMac and then listen to this book on my iPhone. Itunes says the icloud status is waiting so the song(book) is in the process of being matched but has not yet been processed. (no help t

how do sync a book that I have added as music to itunes on my iMac and then listen to this book on my iPhone. Itunes says the icloud status is waiting so the song(book) is in the process of being matched but has not yet been processed. (no help there)

Hi,
Why are you trying to add a book as music? It will not match as this only applies to music files. It will be uploaded if the bit rate is 96 Kbps or greater.
You should change media type to audiobook and you will be able to sync by wifi or USB.
Jim

Process Chain Status is Red even though all processes are successful.

I implement ABAP Code by using standard function module "RSPC_CHAIN_START" for execute process chain and return status of process chain after execute completely as following code:
Execute Process Chain
CALL FUNCTION 'RSPC_CHAIN_START'
EXPORTING
    I_CHAIN             = I_CHAIN
    I_SYNCHRONOUS       = I_SYNCHRONOUS
IMPORTING
   E_LOGID             = P_LOGID.
If sy-subrc = 0.
    gt_status = 's'.
    WHILE gt_status = 's'.
Get Status of Process Chain
      CALL FUNCTION 'RSPC_API_CHAIN_GET_STATUS'
      EXPORTING
      i_chain              = I_CHAIN
      i_logid              = P_LOGID
     IMPORTING
      E_STATUS             = gt_status
      E_MESSAGE            = P_MESSAGE.
Status G or F - Report that the Chain is Successfully Completed.
Status A - The chain is Currently running
Status R or X - Report that the chain has ended with Errors.
    CASE gt_status.
    WHEN 'A'.
Process chain is running
      gt_status = 's'.
      P_MESSAGE = ''.
    WHEN OTHERS.
Process chain is completed
      exit.
    ENDCASE.
    IF gt_status = 's'.
       WAIT UP TO 2 SECONDS.
    ENDIF.
ENDWHILE.
Display Message
IF gt_status = 'G' or gt_status = 'F'.
    MESSAGE i162(00) WITH P_MESSAGE.
Else.
    MESSAGE e162(00) WITH P_MESSAGE.
ENDIF.
ENDIF.
From above code, when execute this function module, sometimes status of process chain is shown as canceled 'X', therefore, output of this function module is shown as "The process chain is canceled". When monitor process chain in RSPC log view, the process chain status is also shown as canceled 'X' and status of all process in process is green, however, after wait for a while, the status changed from canceled 'X' to successful 'G'.
Why did the status of process chain show as canceled 'X' even though finally process chain status is successful ? If I want to check status of process chain after execute completely, which status should to check in ABAP code?
Regards,
Pui

Using that FM.. u will be providing the Instance and Variant of the failed process.. and hence the reload will start from the failed process but not the entire chain...
In general the process status shud finish then or based on the link combination the change from one process to other will happen...
try to maintain a wait time between the process atleast 2 to 4 secs..
thanks
hope this helps..

Issue in Process Chain Status

Hi,
We have various process chains for daily loads. Among those some of the process chain shows the status as red, but the data loaded successfully in the targets. And subsequent chains are not getting triggered.
Can someone let me know the solution for this please?
Regards,
Sarath.

Hi Sarath,
May be some of the process type got failed in the process chain, and it might got sucessfull only after manually resolving or may be after repeating from the Process chain, In these cases some times the process chain entire status turns to RED.
You can forcefully change the process chain to Green.
copy the variant and Instance of the process chain(or select the last process type in the process chain)
goto SE11-->Enter the table RSPCPROCESSLOG and execute --> now enter the copied variant and instance here and execute, It'll give you a new pop up with a LOG id, copy this log id as well.
Now gto se37>Functional module>RSPC_PROCESS_FINISH execute and the enter the copied vaiant, instance and logid, and also enter G (sucesfully completed) in I_State and now execute.

Process chains status

Hi All,
Most of our Process chains trigger at midnight and all are meta chains,and these all are European loads and 24 hours clock and 2 hours late than Indian timings, my question is
for example, there is a process chain A, it should trigger at midnight say 22 that is in our timing at 12,It has been triggerd and next day morning i checked in log view selecting the option ,yesterday and today, and one of its local chain showing red status.Then i went to that particular local chain and checked in logview by selecting the option yesterday and today,then it is showing yesterday's status ,and on the left side today's date also displayed but while clicked on the todays date, some screen is coming and not showing process chains status today. and when i check the option Today in the logview it is giving the message,no logs were found.what does that mean.is it triggered in correct time .or do we need to trigger it.if it is triggered ,then why it is showing red status.please clarify my doubt.
Thankyou.

Hi,
Your meta chain failed yesterday, for this reason today it haven't triggered..
If you want to execute todays load check the reason for failure and rectify it first than start the chain with immediate option for todays load...
Regards
Prasad Nannuri

Process chain status shows incorrect status

When ever i receive bad data requests from R/3, BW pulls the error requests into a separate PSA and pass-thru the good once in another PSA and then into datatarget.
However the overall status is green for the job/package and the package when executed in ProcessChain does not show an errors. But the errors are not noticed until user notices it in the qyuery.
How to capture such errors and notified, is their any automation possible? I have setup e-mail on process chain failures but these kind of errors are not captured because the overall status of request is GREEN.
Here is the status on infopackage.
Incorrect data records - error requests (total status GREEN)
Diagnosis
Data records were recognized as incorrect.
System response
The valid records were updated in the data target and can be used in reporting.
The incorrect records were not written to the data target, but were posted retractively under a new request number in the PSA.
Procedure
Check the data in the error requests, correct the errors, and post the error requests.

Hi Gopikrishna,
Please check if "Error Handling" in the Update Tab of your Infopackage has been enabled, I guess it is.
If this has been enabled , then the error recs will be isolated and only the Correct records will be posted into the Data Target. It is the responsibility of the BW Administrator to identify such errored records, correct them and Post it back to the DAta target. Because error handling is used, the Monitor will show Green, as all the error recs have been separated.
To avoid this, you have to remove Error Handling from the INfopackage, then you will see the Load failing and the Process Step in the process chain would turn RED with the corresponding error messages.
Regards,
Praveen.

Process Chain - Status Green but log says "Termination of chain "

Similar Messages

Maybe you are looking for