Process chain step by step documentation
Hi friends,
I am looking step by step documentation for process chains,please send me documents.
thanks for advace
bye
habeeb
[email protected]
Hi Habeeb,
look at www.service.sap.com/bi --> SAP BW old release --> BI Infoindex --> P: you will find 5 documents on Process Chains.
Go through this help documents and downloads.
http://help.sap.com/saphelp_nw04/helpdata/en/67/13843b74f7be0fe10000000a114084/content.htm
SAP help Creating process chains..
http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/c08b3baaa59649e10000000a11402f/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/8da0cd90-0201-0010-2d9a-abab69f10045
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/19683495-0501-0010-4381-b31db6ece1e9
..http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/c08b3baaa59649e10000000a11402f/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/8da0cd90-0201-0010-2d9a-abab69f10045
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/19683495-0501-0010-4381-b31db6ece1e9
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/36693695-0501-0010-698a-a015c6aac9e1
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9936e790-0201-0010-f185-89d0377639db
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3507aa90-0201-0010-6891-d7df8c4722f7
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/263de690-0201-0010-bc9f-b65b3e7ba11c
Process Chains
Steps for Creating Process chain!
http://help.sap.com/saphelp_nw04/helpdata/en/67/13843b74f7be0fe10000000a114084/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/events/sap-teched-03/using%20process%20chains%20in%20sap%20business%20information%20warehouse
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/19683495-0501-0010-4381-b31db6ece1e9
and also check this.
http://help.sap.com/saphelp_nw04s/helpdata/en/58/9c6c4251e4c153e10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/44/60c800738d311de10000000a155369/content.htm
/people/sap.user72/blog/2005/12/27/the-new-sap-netweaver-job-scheduler-a-redwood-oem-tool
http://help.sap.com/saphelp_nw2004s/helpdata/en/86/6ff03b166c8d66e10000000a11402f/frameset.htm
***Pls assign the points , if info is useful**
Regards
CSM Reddy
Similar Messages
-
Error in process Chain at 'AND' Step
Hi,
I have a Process chain which has different process which are activating different DSO's plus a loading data to a DSO in same level of Process chain. Now the next process is AND step, which will be executed if all the above process are successful.
Now all the activation step are sucess and also loading the DSO, but still there is a error in AND step. Error message is 'Job cancelled after system exception ERROR_MESSAGE'. And one more thing is the previous step of DSO loading data loaded successfully, but in details tab, Last step is showing the message as 'Process Chains: Errors Occured'. But the data is transferred and added in the target.
Please suggest what will be the cause for this error.
Regards,
Vishnu
Edited by: Vishnuvadhan K on May 9, 2008 9:12 AMHi,
you are talking about monitor details tab or process chain details tab?
'Process Chain: errors occured". you will get this msg at monitor details tab bcoz data has been loaded to ODS through process chian, even the load is successful but the chain is not yet completed successfully. so once the chain is success this msg will trun to green. try to figure about the error and rectify it.
did you repeate the AND process to execute next process in process chian.
if you didnt get repeate option you can try with RSPC_PROCESS_FINISH in SE37. -
Process Chain Decision Maker Step
Hi,
Decision Making is required to find the current day is not a 4rth Work Day of the Month. I have written a formula in the Decision Maker which looks like below. Can some one validate?
WORKINGDAY_MONTH( RIGHT( 2, Current Date ), SUBSTRING( Current Date, 4, 2 ), LEFT( 4, Current Date ) ) <> 4
If something is missing, please correct.Hi Nilesh,
I have a problem with a decision step in my process chain. Also using 'WORKINGDAY_MONTH' However I don't understand what it is doing. Here is the formula;
1st Line
Command -> IF
Formula -> WORKINGDAY_MONTH( Current Date, 'IE', '' ) = 1
then
Event - > Option 1
2nd Line
Command -> Else IF
Formula -> WORKINGDAY_MONTH( Current Date, 'IE', '' ) 1
then
Event -> Option 2
3rd Line
Command -> Else
then
Error.
I would expect that on 1st day of each month it would trigger event option 1. This has been working sucessfully in previous months, however in Jan, it has triggered event option 1 for each of the following days, 1st, 2nd, 3rd, 4th & 5th Jan(today).
Following this decision point, it triggers Dataloads, only required at month end, ie 1st of each month. Everyday this week I had reverse the process.
Can you help me to understand what is happening? What transaction can I use to view logic of this function WORKINGDAY_MONTH.
Thanks very much,
Michelle -
Is a save step neccessary in a Process Chain when loading hierarchies with an ABAP program?
We are loading hierarchies using the ABAP routine found here in the SDN.
We have come accross the issue where the process chain loads successfully, but does not update the hierarchy (this problem is documented in the SDN). It is not a consistent issue, but it causes problems when it does occur.
OSS note 652856 points out that a SAVE HIERARCHY step is needed after the load and before the Change Attribute run.
We have added the step to the process chain, which leads me to the question.
In using the ABAP program to load hierarchies is the addition of the Save Hierarchy step necessary?
Will that resolve the issue with hierarchies not updating?Hi Bill,
Yes, SAVE HIERARCHY step is required when hierarchies are loaded as part of process chain. This step ensures that the hierarchy data loaded to BW has been saved. Then we have to run ACR so that these hierarchies will be activated and adjusted.
This is the reason why even the hierarchy data loaded using infopackage needs this step. This step is not required if the Infopackage is triggered manually.
This link will help you in better understanding
http://help.sap.com/saphelp_nw04/helpdata/en/3d/320e3d89195c59e10000000a114084/content.htm
Regards
Chandu -
Reg: Process Chain, query performance tuning steps
Hi All,
I come across a question like, There is a process chain of 20 processes.out of which 5 processes are completed at the 6th step error occured and it cannot be rectified. I should start the chain again from the 7th step.If i go to a prticular step i can do that particular step, How can i start the entair chain again from step 7.i know that i need to use a function module but i dont know the name of FM. Please somebody help me out.
Please let me know the steps involved in query performance tuning and aggregate tuning.
Thanks & Regards
Omkar.KHi,
Process Chain
Method 1 (when it fails in a step/request)
/people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
How is it possible to restart a process chain at a failed step/request?
Sometimes, it doesn't help to just set a request to green status in order to run the process chain from that step on to the end.
You need to set the failed request/step to green in the database as well as you need to raise the event that will force the process chain to run to the end from the next request/step on.
Therefore you need to open the messages of a failed step by right clicking on it and selecting 'display messages'.
In the opened popup click on the tab 'Chain'.
In a parallel session goto transaction se16 for table rspcprocesslog and display the entries with the following selections:
1. copy the variant from the popup to the variante of table rspcprocesslog
2. copy the instance from the popup to the instance of table rspcprocesslog
3. copy the start date from the popup to the batchdate of table rspcprocesslog
Press F8 to display the entries of table rspcprocesslog.
Now open another session and goto transaction se37. Enter RSPC_PROCESS_FINISH as the name of the function module and run the fm in test mode.
Now copy the entries of table rspcprocesslog to the input parameters of the function module like described as follows:
1. rspcprocesslog-log_id -> i_logid
2. rspcprocesslog-type -> i_type
3. rspcprocesslog-variante -> i_variant
4. rspcprocesslog-instance -> i_instance
5. enter 'G' for parameter i_state (sets the status to green).
Now press F8 to run the fm.
Now the actual process will be set to green and the following process in the chain will be started and the chain can run to the end.
Of course you can also set the state of a specific step in the chain to any other possible value like 'R' = ended with errors, 'F' = finished, 'X' = cancelled ....
Check out the value help on field rspcprocesslog-state in transaction se16 for the possible values.
Query performance tuning
General tips
Using aggregates and compression.
Using less and complex cell definitions if possible.
1. Avoid using too many nav. attr
2. Avoid RKF and CKF
3. Many chars in row.
By using T-codes ST03 or ST03N
Go to transaction ST03 > switch to expert mode > from left side menu > and there in system load history and distribution for a particual day > check query execution time.
/people/andreas.vogel/blog/2007/04/08/statistical-records-part-4-how-to-read-st03n-datasets-from-db-in-nw2004
/people/andreas.vogel/blog/2007/03/16/how-to-read-st03n-datasets-from-db
Try table rsddstats to get the statistics
Using cache memoery will decrease the loading time of the report.
Run reporting agent at night and sending results to email.This will ensure use of OLAP cache. So later report execution will retrieve the result faster from the OLAP cache.
Also try
1. Use different parameters in ST03 to see the two important parameters aggregation ratio and records transferred to F/E to DB selected.
2. Use the program SAP_INFOCUBE_DESIGNS (Performance of BW infocubes) to see the aggregation ratio for the cube. If the cube does not appear in the list of this report, try to run RSRV checks on the cube and aggregates.
Go to SE38 > Run the program SAP_INFOCUBE_DESIGNS
It will shown dimension Vs Fact tables Size in percent.If you mean speed of queries on a cube as performance metric of cube,measure query runtime.
3. --- sign is the valuation of the aggregate. You can say -3 is the valuation of the aggregate design and usage. ++ means that its compression is good and access is also more (in effect, performance is good). If you check its compression ratio, it must be good. -- means the compression ratio is not so good and access is also not so good (performance is not so good).The more is the positives...more is useful the aggregate and more it satisfies the number of queries. The greater the number of minus signs, the worse the evaluation of the aggregate. The larger the number of plus signs, the better the evaluation of the aggregate.
if "-----" then it means it just an overhead. Aggregate can potentially be deleted and "+++++" means Aggregate is potentially very useful.
Refer.
http://help.sap.com/saphelp_nw70/helpdata/en/b8/23813b310c4a0ee10000000a114084/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/60/f0fb411e255f24e10000000a1550b0/frameset.htm
4. Run your query in RSRT and run the query in the debug mode. Select "Display Aggregates Found" and "Do not use cache" in the debug mode. This will tell you if it hit any aggregates while running. If it does not show any aggregates, you might want to redesign your aggregates for the query.
Also your query performance can depend upon criteria and since you have given selection only on one infoprovider...just check if you are selecting huge amount of data in the report
Check for the query read mode in RSRT.(whether its A,X or H)..advisable read mode is X.
5. In BI 7 statistics need to be activated for ST03 and BI admin cockpit to work.
By implementing BW Statistics Business Content - you need to install, feed data and through ready made reports which for analysis.
http://help.sap.com/saphelp_nw70/helpdata/en/26/4bc0417951d117e10000000a155106/frameset.htm
/people/vikash.agrawal/blog/2006/04/17/query-performance-150-is-aggregates-the-way-out-for-me
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1955ba90-0201-0010-d3aa-8b2a4ef6bbb2
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ce7fb368-0601-0010-64ba-fadc985a1f94
http://help.sap.com/saphelp_nw04/helpdata/en/c1/0dbf65e04311d286d6006008b32e84/frameset.htm
You can go to T-Code DB20 which gives you all the performance related information like
Partitions
Databases
Schemas
Buffer Pools
Tablespaces etc
use tool RSDDK_CHECK_AGGREGATE in se38 to check for the corrupt aggregates
If aggregates contain incorrect data, you must regenerate them.
Note 646402 - Programs for checking aggregates (as of BW 3.0B SP15)
Thanks,
JituK -
Failind AND step of process chain
Hi all
I am facing problem with AND step in one process chain.
AND step is failing as soon as chain is triggered.
All the proceses before AND are executing properly with GREEN Status.
"This AND process is not waiting for event RSPROCESS, parameter 4BYB726KFX6RHP8SWWPP1CIR9" is the message displayed... parameter mentioned is a DTP.
Please Help
Thanks
SUDEEPDid you transport the process chain again?
Go to edit mode of the process chain, right click on AND, maintain and press Ok ! try to activate the process chain again and see if that shows any error.
- Danny -
Plzz correct me reagrding process chains.
hi friends,
iam working on BW in process chains.
i want to know the possible ways of correcting the process chains and plz help me if iam wrong and by providing ur suggestions.
1) whenever process chain fails , we will check process monitor in logview and find out that type of load . if it full load, we delete the request and we will restart the entire process chain.
restarting means we will again schedule and activate it right?
I refer a weblog on restarting of PC , it said that
Sometimes, it doesn't help to just set a request to green status in order to run the process chain from that step on to the end.
You need to set the failed request/step to green in the database as well as you need to raise the event that will force the process chain to run to the end from the next request/step on.
My question is why will make the request green from red? and also if we the reuqest from rd to green , will the process chain works normally though it contains errors ?
2) how to correct if teh load is delta load.
Iam very much confused in handling the errors of process chains .
can any one explain me clearly plzz. any good documentation for error handlin plzz.
regards,
SiddarthaNo duplicate posts please. Moderators will not entertain the duplicate posts.
-
Process Chain hangs on AND process
Help Super gurus!
I've tried several versions of a chain that loads multiple InfoPackages serially then multiple DTP in parallel using filtering from the PSA to a DSO. All load successfully. Then I have the DTPs all meet at an 'AND' process before processing should continue to a cube.
The 'AND' process also shows green but it does not continue to the next process step. It just stops there, no more jobs running, no yellow, nothing. It thinks it's all done, everything after that is still blue.
Why does it hang there and what can I do to get it to continue?
Thanks,
Al
Points available.Hi,
Not sure what is the root cause in your case.
Try this. It may work. Normally this is done after a step turns red and no repeat is available.
Method 1 (when it fails in a step/request)
/people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
How is it possible to restart a process chain at a failed step/request?
Sometimes, it doesn't help to just set a request to green status in order to run the process chain from that step on to the end.
You need to set the failed request/step to green in the database as well as you need to raise the event that will force the process chain to run to the end from the next request/step on.
Therefore you need to open the messages of a failed step by right clicking on it and selecting 'display messages'.
In the opened popup click on the tab 'Chain'.
In a parallel session goto transaction se16 for table rspcprocesslog and display the entries with the following selections:
1. copy the variant from the popup to the variante of table rspcprocesslog
2. copy the instance from the popup to the instance of table rspcprocesslog
3. copy the start date from the popup to the batchdate of table rspcprocesslog
Press F8 to display the entries of table rspcprocesslog.
Now open another session and goto transaction se37. Enter RSPC_PROCESS_FINISH as the name of the function module and run the fm in test mode.
Now copy the entries of table rspcprocesslog to the input parameters of the function module like described as follows:
1. rspcprocesslog-log_id -> i_logid
2. rspcprocesslog-type -> i_type
3. rspcprocesslog-variante -> i_variant
4. rspcprocesslog-instance -> i_instance
5. enter 'G' for parameter i_state (sets the status to green).
Now press F8 to run the fm.
Now the actual process will be set to green and the following process in the chain will be started and the chain can run to the end.
Of course you can also set the state of a specific step in the chain to any other possible value like 'R' = ended with errors, 'F' = finished, 'X' = cancelled ....
Check out the value help on field rspcprocesslog-state in transaction se16 for the possible values.
Thanks,
JituK -
Issue with ABAP program execution from process chains
Hi All:
We have a process chain with 3 steps, each of them executing the same program with three different variants. The program is ftp's the file from APO's dataexchange (mount) to another ftp server. The first variant transfers file A to a directory in the external ftp server (say /X) . The second and the third variants are supposed to transfer different files, B and C to the same directory.
That is where the problem is. After the process chain is successful, I see two files B and C but the contents are same and that of C. So, if I switch the steps in the PC to bring in A then C and then B, I see files B and C with content of C. I tried C then A then B. I see the file names correct but now the contents are A, A then B.
Have any of you come across this issue? Do you know that these is an existing problem? IF you have a solution, pl. let me know.
Thanks
NarayananNarayanan,
Instead of doing it in three steps - would it be possible for you to have one UNIX script or equivalent doing the above and calling the same from your process chain ...?
We do a lot of FTPs but then our file names are standard and we have a UNIX script for the same executed using a system command through a process chain and it has been working without issues for the past 1 year ...
Maybe I have not got your situation properly ... some more detail on the program details and what you are doing in more detail would help.... also SP levels please.. -
ABAP PROGRAM to run a process chain
Hello all,
What is the ABAP program to run a process chain after a step that has failed but is manually corrected?
In short a std ABAP program to run a pc.
Regards,
NIKEKABHi.
Plz see my answer to similar question in [this thread|Re: Manage a message at the end of process chain on Web planning Application].
Regards. -
Process chain problem...., its urgent
Hi all
in my process chain we are loading 4 loads into ODS. After 3 loads, 4th load didn't take place. its not yet started even 3rd one successfully ran. its not showing error also. what can i do. after 4th one ODS activation process is there.
Please advice me. will i go for manual loading. if i do manual, what abt activation after 4th load. will i do activation also manual or else it will trigger automatically as part of process chain........../
Advice me frnds..., its urgent
Regards
swethaHi Swetha,
Sometimes, it doesn't help to just set a request to green status in order to run the process chain from that step on to the end.
You need to set the failed request/step to green in the database as well as you need to raise the event that will force the process chain to run to the end from the next request/step on.
Therefore you need to open the messages of a failed step by right clicking on it and selecting 'display messages'.
In the opened popup click on the tab 'Chain'.
In a parallel session goto transaction se16 for table rspcprocesslog and display the entries with the following selections:
1. copy the variant from the popup to the variante of table rspcprocesslog
2. copy the instance from the popup to the instance of table rspcprocesslog
3. copy the start date from the popup to the batchdate of table rspcprocesslog
Press F8 to display the entries of table rspcprocesslog.
Now open another session and goto transaction se37. Enter RSPC_PROCESS_FINISH as the name of the function module and run the fm in test mode.
Now copy the entries of table rspcprocesslog to the input parameters of the function module like described as follows:
1. rspcprocesslog-log_id -> i_logid
2. rspcprocesslog-type -> i_type
3. rspcprocesslog-variante -> i_variant
4. rspcprocesslog-instance -> i_instance
5. enter 'G' for parameter i_state (sets the status to green).
Now press F8 to run the fm.
Now the actual process will be set to green and the following process in the chain will be started and the chain can run to the end.
Of course you can also set the state of a specific step in the chain to any other possible value like 'R' = ended with errors, 'F' = finished, 'X' = cancelled ....
Check out the value help on field rspcprocesslog-state in transaction se16 for the possible values.
Try this solution with your 3rd ODS..hope this will solve your problem for this instance. This is just a workaround.
Before next scheduel of the process chain..remove the link between 3rd ODS and 4th ODS and then reconnect once again and activate the process chain and schedule it as per your schedule cycle. From next upload onwards everything works fine.
Assign points if it is helpful.
Regards,
Sreedhar -
Failed meta chain maintenance in Process chain in SAP BI
Hi all,
I have a Process chain having the meta chain of master data population.When successful , proceeds with the further steps in process chain. It has been scheduled in midnight.
After monitoring the PC , found the error in the master meta chain , so i repeat the step.
Here , after success of meta chain all steps gets running down the line till the end step in PC.
I do not want to re-run the steps below meta chain after repeat step.
Any Ideas to ignore the re-run ??Hi,
If your Process is still running(Yellow color status) then right click it and go to Schduled Jobs. On this you will go to Job Overview there you can press STOP.
Else go to the SM37, there you can go and select your process using your process ID and STOP it.
And if you want to kill the complete process chain then go for Remove from Schedule.
Different Ways to stop process chain
1)SM37 -->Kill Job
2)SM50/sm66- ->Kill process
3)RSPC>Job Log>Make the process RED forecefully.
4)RSPC>Process chain> main Menu"Remove from Scheduling" OR
5)se37-->RSPC_API_CHAIN_INTERRUPT
give RFC BW system name(technical) and process chain name(technical)
Steps 1 -3 stops the chain running in process
Steps 4-5 stops the chain AFTER the current job which is running is completed as sucessful or Failure by nature.
Hope this helps you. -
How to Update Infoobject Masterdata using Process Chain
Hello,
I am trying to update the Master Data in Infoobjects (text and Attr) by using Process chain.
The steps used are
1. Delete data from PSA
2. Execute Infopackage
3. Execute DTP for Attr
4. Run Attr Change
5. Execute DTP for TEXT
While updating Text, I am receiving error for duplicate entry.
I am trying understand the correct process to update Infoobject Master Data in BI7 (SCM5/5.1). Please adivse.
Thanks,
SanjuHI Narendra,
In process chain functions, you can use the process type with the name Trigger Event Data Change (for BEx Broadcaster)
The above process type must be used to determine which InfoProviders should be checked for data changes. You can specify multiple InfoProviders within this process type either directly (by simply entering the names of the InfoProviders) or indirectly by specifying the name of the variant based on one of the following process types:
Execute InfoPackage (LOADING)
Activate DataStore Object Data
Update DataStore Object Data (Further Updating)
Read PSA and Update Data Target
Hope this helps
Regards,
Sathya -
Help On Creating Process Chain
Dear Experts,
we have a Process chain A running twice a day (01:00 AM & 13:00PM). Now I've created a Process Chain B(Broadcasting workbook in SAP BW 3.x). This Chain has to run by following 01:00AM only once after finishing the Process Chain A(this is running twice a day). Whereas my Process chain A has to run only once a day. Please give me your inputs & suggestions.
Regards,
PassionateHi
You can achieve this using decision step in Process chain.
include decision step and then your PC B in your PC A. decision step will work based on If-Else. give condition if Systime is less then 13:00 then your PC B has to trigger.
check the below article.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/705aefe8-8a27-2d10-7b8e-88017ee9158c?quicklink=index&overridelayout=true
Regards,
Venkatesh -
I was asked to complete the master data process chain for whole of finance...its all business content?
How do I proceed.....do I need to go check manually each and every infoobject if it has masterdata?
Any easy way out?Hi ,
You need to create a process chain and have steps to load each and every Info Object in FI area.
Basically make a list of all FI master data Info Objects and when you create a process chain create a start variant (ideally schedule it , during low data extract from r/3 to BW ) and also get an approval for the load scheule say daily, weekly , monthly etc.
Then attach the Execute InfoPackage process type for each info object and link them all. So it will load step by step all Master data Info Objects of FI.
Hope this helps.
Cheers
Raja -
Collection in source system ended-Process chain error
Hi friends,
I have got a PC which failed due to error : Collection in source system ended.
My flow of PC is .
start--
--Load IP 1
---Load IP2
_--load Ip 3
Load IP4
---Load Ip 5.
I got this error at IP2 and so my pc fail .
can i manually upload this IP2 and make the process chain OK?
what are the steps involved in rectifying this?
regards,
siddarthaFirst try to find out the reason for the load failure. Once you fix this, do a manual run of the infopackage and when successful you can continue with the rest of process chain.
Sometimes, it doesn't help to just set a request to green status in order to run the process chain from that step on to the end.
You need to set the failed request/step to green in the database as well as you need to raise the event that will force the process chain to run to the end from the next request/step on.
Therefore you need to open the messages of a failed step by right clicking on it and selecting 'display messages'.
In the opened popup click on the tab 'Chain'.
In a parallel session goto transaction se16 for table rspcprocesslog and display the entries with the following selections:
1. copy the variant from the popup to the variante of table rspcprocesslog
2. copy the instance from the popup to the instance of table rspcprocesslog
3. copy the start date from the popup to the batchdate of table rspcprocesslog
Press F8 to display the entries of table rspcprocesslog.
Now open another session and goto transaction se37. Enter RSPC_PROCESS_FINISH as the name of the function module and run the fm in test mode.
Now copy the entries of table rspcprocesslog to the input parameters of the function module like described as follows:
1. rspcprocesslog-log_id -> i_logid
2. rspcprocesslog-type -> i_type
3. rspcprocesslog-variante -> i_variant
4. rspcprocesslog-instance -> i_instance
5. enter 'G' for parameter i_state (sets the status to green).
Now press F8 to run the fm.
Now the actual process will be set to green and the following process in the chain will be started and the chain can run to the end.
Maybe you are looking for
-
DVD Drive Broken -Can I install from another Mac?
Hello All A friend has a MacMini with a broken DVD Drive. He also has a MacBook, which has a working drive. He is still using Leopard and wants to upgrade to Snow Leopard. Can he upgrade the MacBook, then upgrade the MacMini using the MacBook? If so,
-
Quicktime cant export or share!
My Quicktime can't export or share files! The Export seems to work fine but crashes in the end, the exported file crashes every software (Quicktime, iMovie, Mail etc.) The same problem when exporting in iMovie! The same file converts just fine on my
-
I have redeemed a gift card and says the code was not properly activated what do i do?
i have redeemed a gift ccard and it said the card was not activated properly what do i do
-
One of my customer would like information on the MTBF on the Cisco kit we use in their network. They recently had a high profile outage (it was a power issue) that highlighted a single point of failure. This has raised the issue with their senior man
-
How do I paste the file I converted to my word document?
How do I paste the converted file to my document