Process chain termination - Attributes are not yet maintained

Hi Experts ,
I am running a process chain in the production system , which is failed , however the below objects in the chain is completing successfully.
Please see the below msg descriptions
Attributes are not yet maintained
Entire chain now has status 'R'
Process Start Process, variant Technical InfoObjects Attribute Load has status Undefined
Process Execute InfoPackage, variant InfoPackage has status Undefined ...
Process Execute InfoPackage, variant BW Systems has status Undefined
Process Execute InfoPackage, variant InfoSource has status Undefined
Process Execute InfoPackage, variant InfoCube has status Undefined
Process Execute InfoPackage, variant Application Component has status Undefined
and many things which are undefined ..
Have nay one come across this issue , how to resolve this ?
Thanks

Hi,
Is there any changes done for the respective IP's/objects used in the chain recently. It might be the cause and before running jst test the chain using CHECK option and accordingly redesign, activate and schedule the process chain,
rgds,

Similar Messages

Error RSM006 "Attributes are not yet maintained"

Hello everyone, I have had a problem with two infopackages, one of them has the 0COORDER_TEXT datasource and the other 0COORDER_ATTR datasource. When I run the process chain with these infopackages, I have the error RSM006 "Attributes are not yet maintained", if I try to change these infopackages with the RSA1 I have the same error.
Do you have any suggestion to solve this problem?
Thank you very much.
Best Regards
Maximiliano Valin

Thank you, I check your recommendation and I found everything ok, the 0COORDER is ok and active, and the tranfer rules are ok and active too, I don't know what other thing could be the problem.
This is the help message that appear when the error happens.
Attributes are not yet maintained
Message no. RSM006
Diagnosis
The attributes have either not yet been created or activated.
The data cannot be taken from the source system without maintained attributes. Therefore, this data request is not possible.
Procedure
Maintain the attributes for this master data-InfoSource in the Administrator Workbench and then activate them.
Thank you for everything.

Process chain error - Attribute change run

Hi,
I am creating a Process chain to load 4-5 master data with its text.
I get a error while executing :
it says : Attribut change run need to be set up.
what should i do
1 :where should i set it up and how ??
2 :why is that needed ??
I included it in the Process chain and still it says that i need to set it up in the administrative workbench .
Please help me understand .
Thanks,
GG

Hi , when i execute a Process chain it stops at the A Master data load package and i get that red.
if i double click it ,
It says that
Attributes are not yet maintained.
If i see the details,it says
Diagnosis
     The attributes have either not yet been created or activated.
     The data cannot be taken from the source system without maintained
     attributes. Therefore, this data request is not possible.
Procedure
     Maintain the attributes for this master data-InfoSource in the
     Administrator Workbench and then activate them.

Attributes not yet maintained for process chains

Hii All,
when tried to load 0VENDOR master data from R/3 using process chains the chain failed and the error says "attributes are not maintianed" but when we checked the attributes ,they are all defined and in active state .so what might be the possible cause of error and how to fix the issue?.
thanks in advance

Hi Jayakrishna,
Have you tried loading 0VENDOR simply from an InfoPackage...does that work?

Document from last posting run in 2007 are not yet updated

Hi Guru's,
When I run the AJRW fiscal year change 2009, it was not successful because a system message says" fiscal year change in company code XXX, possible only after year end closing 2007.
So I execute AJAB-Year End closing in 2007, in Tab " Closed Carried Out - it say "NO", when i double click it says: "Document from last posting run in 2007 are not yet updated"
So i check it in SM35 to see when did this error started, i found out it started at around mid 2007, July, status is In background instead of Processed. Out of 15 thousand transaction, 14 of which got an error.
Please help how we are able to post asset accounting for 2009.
Thanks
Mila
Edited by: Mila Calonge on May 4, 2009 10:02 AM

check the error log why the transactions are not processed. Recreate the session with transaction code AFBD giving the year and fiscal period and check the error log. It will give the clue why the transactions are not processed.
Those might not have processed due to GL account assignment or cost center master data issues.

Error in process chain creation : SET SCREEN not allowed in subscreens

Hello,
We are getting an Error in process chain creation : SET SCREEN not allowed in subscreens SAPRSSM 0100.
Please give a solution. Thanks in advance.
RR.

Just do detail view on in the process chain. It will take you to the error. See the message and then display message. You can know why the message is appearing.

How to determine whether process Chain is active or Not

Hello Experts,
How to determine whether process Chain is active or Not, because i have large number of PC to activate.

Hi,
Please check this program in SE38---- /SSA/BWT
This program will give you information regarding all your process chains which are active and running based on there timings.
Hope it helps.
Regards,
AL

Post order processing for sales document is not yet complete

hi,
sap gurus,
i am facing the error while saving the sales order and this ticket is unique and it is saying that
"post order processing for sales document is not yet complete".
please help me in this regard.
and it is blocking the order for further processing.
regards,
balajit

I dont think this is a standard error message. Some exit is applied for sale order to meet some requirements. You need to check with your ABAPer.
In fact, you can conclude yourself based on the error message number. If it starts with Z, then the above holds good.
thanks
G. Lakshmipathi

Hi i have 50 infoobjects as part of my aggregates and in that 10 infoobjects have received changes in masterdata.so in my process chain the Attribute change run in running for a long time.can i kill the job and repeat the same.

Hi i have 50 infoobjects as part of my aggregates and in that 10 infoobjects have received changes in masterdata.so in my process chain the Attribute change run in running for a long time.can i kill the job and repeat the same.

Hi,
I believe this would be your Prod system, so don't just cancel it but look at the job log. If it is still processing then don't kill it and wait for the change run to complete but if you can see that nothing is happening and it is stuck for a long time then you can go ahead and cancel it.
But please be sure, as these kind of jobs can create problems if you cancel them in the middle of a job.
Regards,
Arminder Singh

Attributes are not displaying in Navigational Attributes area of DSO.

Hi Experts,
I have created a DSO and have included Info Objects 0SOLD_TO & 0SHIP_TO. In the Navigational Attributes area, its attributes are not getting displayed even though the attributes are in the info object.
What are the steps needed to perform for it to display there?
Waiting for your reply,
Thanks in advance,
With Kind Regards,
Shreeem

Hi Shreem,
If you want attributes of any master objects in navigational attributes section, you have make them navigational attributes while defining base info object.
Please follow the below steps.
1) goto RSA1, search for 0SOLD_TO & 0SHIP_TO info objects and open them
2) goto edit mode of info object and goto attributes section.
3) here you will find for every object "DIS" --- this means these attributes are display attributes.
4) If you want to change any attribute to NAV, then click on "Pencil Mark".
5) Now you can see text NAV instead of DIS for that attribute.
activate the info object and goto DSO, now you will see that attribute in navigational attribute folder.
Regards,
Venkatesh

Entity Attributes are not populating while creating EO using EO wizard.

Hi,
I am using JDeveloper version 10.1.3.3.0.3 and E-Business suite12.1.2.
I am facing problem while creating EO using EO wizard.
In Entity Object Editor Entity Attributes are not populating while creating EO.
Please help me resolve this issue.
Thanks & Regards,
Sagarika

Please ensure you click on Tables and Synonyms check box and select proper schema.
Try to select the table from the list after this instead of writing as in 10.1.3 when we write table name it automatically selects from the list if it exists in the list.
Thanks
AJ

Please help: Message no. M7090/Accounting data not yet maintained

To whom it may concern-
I am currently a student attending LSU working on an SAP project worth a very significant portion of our grade. The following is a detailed description of the problem, which should hopefully help you put your finger on a solution.
My problem is that when I try to hit the accept button on PP10 for a goods issue, I get an error message "Accounting data not yet maintained" (please refer to attached screenshot #1). When I click the help button, I get a vague solution (please refer to attached picture #2). I have tried and "change" my material master record for Cushion 065 by going back to MM06/create material master for trading goods (please refer to attached picture #3), but I don't have the understanding of SAP to manipulate the information at this point. It is just giving me the ability to manipulate views and it is only letting me choose the following views (please refer to attached picture #4).
Please help me find a more useful pathway so I can proceed. If whoever is helping me needs me detailed information, please let me know. Also, if someone could direct me to a user support function where I can talk to a representative in real time, I would appreciate that.
Mack Bradford

Extend the Accounting view with Tcode :MM50
Go to MM50 , select Maintenance status as "B" and enter Material number and click on execute (F8), then select the Material line item and click on Maintain Materials tab.
Regards,
Ramesh

Process Chain Termination issue.

Hi,
     I ran a process chain, its been terminated in the middle.
here is the message from log.
Process Execute InfoPackage , variant WBS Hierarchy has status Ended with
errors (instance REQU_AI8QGHV5KCC7KC1VSNGPRY9VF )
Process chain termination has been confirmed in meta chain
CE0BOS15OV4H1VDIEVZSFDEH8 , destination 'NONE '.
Looking forward to your solution.
Cheers
Senthil

what is the messege it gives in the display messege screen. if the load is successful how it will get terminated.
chk the details tab of RSMO.
is the load is for ods? then in the details tab chk for subsequent processing is failed? chk the error messege, hope this may be due to invalid records. correct it in PSa and push to ods.
if any thing else pl revert us
Ramesh

Is there a way to retrieve pictures deleted from photo stream that are not yet on camera roll?

Is there any way to retrieve pictures deleted from photo stream that are not yet on camera roll? I used my iPhone for a camera and put pix on iPad through photo stream. But I didn't realize they were not on the iPad camera roll, and deleted them from the phone Photostream. Now they are gone. Any chance to find them in the cloud?

No, there is no re-cycling bin on the iPad. If you deleted them from the card, and you havn't yet re-used the card, then there may be recovery software that you can get for your computer that might be able to get them back.

SOLUTION MANAGER - VAR Scenario - Attributes are not transfered

Hi Solman Gurus
I have an issue regarding connection between Customer and VAR solman.
IThe connection is established following document How To Setup ServiceDesk 2 ServiceDesk Connection Nov 09.pdf.
The problem is in VAR Solman.
When message is transfered from Customer solman to VAR solman the following attributes are not transfered:
Sold-to party, Reported by, Support Team, Message Processor.
The Ibase is configured in both systems. When message is posted from satelite to Customer Solman all this attributes
are transfered. In the next steep, when message is transfered from Customer solman to VAR solman this attributes remain
empty in VAR Solman.
What confugration is missing in VAR Solman?
Thank you in advance
Marko

Hello Marko,
How did you define the value mapping? Automatically or manually?
Have you checked that Incoming and outgoing value mapping has been created in both systems?
Are you copying the values or taking an other action?
Could there be a rule that is setting the value to space?
I'd take a closer look at your value mapping and make sure incomming and outgoing have been defined properly on each system and make sure the rule is correct, and its not taking some unexpected action like set the value to blank when you wanted to copy it.
Regards,
Paul

Process chain termination - Attributes are not yet maintained

Similar Messages

Maybe you are looking for