PROCESS CHAIN TO BE EXECUTED by SM37

Hi all,
can we execute process chain through SM37. We have requirement to execute Process chain immediately which is already in Released (Night 10 PM)status. But i did as , selected the Job and gave the selection immediately in SM37 but executed successfully but the relesed (Night 10 PM) status of the same job canceled.
can we have any option to execute the process chain job in SM37 rather than executing in RSPC.
pl help me in this regard.
Thanks
Pinky Reddy

in RSPC, schedule the job... while scheduling put the time you want to execute the process chain.
in SM37, you can then change the job time..

Similar Messages

How to find process chain using background job in sm37

How to find process chain using background job in sm37

Better is to select the job.
Select (Define) Step (s) or F6.
Select the line and Menu Goto>Variant.
The variant contains the name of the CHAIN and its VARIANT.
Success
We faced an old job and via job monitoring we were informed about a cancelled job every 'interval'.
We noticed that the related chain was deleted but still the job was scheduled each interval again and was cancelled because an event was missing
We could not find the scheduled job via SM37.
Via view V_OP, view over tbtco abd tbtcp, we find the related entry.
We delete these entries via function BP_JOB_DELETE....
Edited by: Jack Otten on Jul 9, 2010 2:50 PM

Process chain failing while executing DTP

Hi All,
My process chain is failing while executing DTP.
Error i got is: OBJECTS_OBJREF_NOT_ASSIGNED
Access not possible using 'NULL' object reference.
The dump is occuring in method : GET_FIELD_LIST_INBOUND
TRY.
      CALL METHOD cl_rstran_model=>factory
        EXPORTING
          i_tranid = i_tranid
        RECEIVING
          r_r_model = l_r_model.
    CATCH cx_rstran_exception.
      RAISE EXCEPTION TYPE cx_rs_step_failed
ENDTRY.
From SDN , i am quite sure that its a SAP problem and needs to apply some Note.
Could anyone please tell me, which note i should apply ?
Thanks.

Hi,
check the note note 1081884 it may help you ..
check link ..
/message/2817339#2817339 [original link is broken]
Reagrds,
Shikha
Edited by: Shikha Goel on Oct 10, 2008 6:21 AM

Error in process chain DTP not executed

Hello,
Sorry tried to find the most appropriate forum, not sure it is the one. Am a newbee
In a process chain we have a event passing information from one cube to another that stops and do not go until the end of the job. But it doesn't happen all the time, which is rather strange.
Here is the log when everything goes well:
2007-11-16                                                    Dynamic List Display                                                           1
     Job log     Job log     Message text uncoded     Msg.typ     Message ID     Msg.no.
     16/11/2007     10:46:44     Job started     S     0     516
     16/11/2007     10:46:44     Step 001 started (program RSPROCESS, variant &0000000006327, user ID ALEREMOTE)     S     0     550
     16/11/2007     10:46:52     Performing check and potential update for status control table     S     RSM1     490
     16/11/2007     10:46:52     Performing check and potential update for status control table     S     RSM1     490
     16/11/2007     10:46:53     Status 'Executable' (user ALEREMOTE)     S     RSBK     223
     16/11/2007     10:46:53     Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BIDTPR_16322_1 with ID 10465300     S     RSM     703
     16/11/2007     10:46:58     Status 'Active' (user ALEREMOTE)     S     RSBK     223
     16/11/2007     10:46:59     Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BIDTPR_16322_1 with ID 10465800     S     RSM     703
     16/11/2007     10:46:59     Job finished     S     0     517
And here is the one when it stops:
2007-11-16                                                    Dynamic List Display                                                           1
     Job log     Job log     Message text uncoded     Msg.typ     Message ID     Msg.no.
     16/11/2007     10:48:27     Job started     S     0     516
     16/11/2007     10:48:27     Step 001 started (program RSPROCESS, variant &0000000006327, user ID ALEREMOTE)     S     0     550
     16/11/2007     10:48:35     Performing check and potential update for status control table     S     RSM1     490
     16/11/2007     10:48:36     Performing check and potential update for status control table     S     RSM1     490
     16/11/2007     10:48:36     Status 'Executable' (user ALEREMOTE)     S     RSBK     223
     16/11/2007     10:48:36     Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BIDTPR_16328_1 with ID 10483600     S     RSM     703
     16/11/2007     10:48:41     Status 'Active' (user ALEREMOTE)     S     RSBK     223
     16/11/2007     10:48:42     EXTRACTION OF DATAPACKAGE 000001     S     RSAR     51
     16/11/2007     10:48:42     Processing of data package 000001 started     S     RSBK     244
     16/11/2007     10:48:43     All records forwarded     S     RSM2     730
     16/11/2007     10:48:44     SQL: 16.11.2007 10:48:44 ALEREMOTE     I     DBMAN     99
     16/11/2007     10:48:44     ALTER TABLE "/BIC/FZHREMPL" ADD PARTITION     I     DBMAN     99
     16/11/2007     10:48:44     /BIC/FZHREMPL0000000430 VALUES LESS THAN     I     DBMAN     99
     16/11/2007     10:48:44     (0000000430 ) TABLESPACE "PSAPCAR"     I     DBMAN     99
     16/11/2007     10:48:44     SQL-END: 16.11.2007 10:48:44 00:00:00     I     DBMAN     99
     16/11/2007     10:48:44     SQL: 16.11.2007 10:48:44 ALEREMOTE     I     DBMAN     99
     16/11/2007     10:48:44     ALTER TABLE "/BIC/FZHREMPL" MODIFY PARTITION     I     DBMAN     99
     16/11/2007     10:48:44     /BIC/FZHREMPL0000000430 REBUILD UNUSABLE LOCAL     I     DBMAN     99
     16/11/2007     10:48:44     INDEXES     I     DBMAN     99
     16/11/2007     10:48:44     SQL-END: 16.11.2007 10:48:44 00:00:00     I     DBMAN     99
     16/11/2007     10:48:44     SQL: 16.11.2007 10:48:44 ALEREMOTE     I     DBMAN     99
     16/11/2007     10:48:44     ANALYZE TABLE "/BIC/FZHREMPL" PARTITION (     I     DBMAN     99
     16/11/2007     10:48:44     /BIC/FZHREMPL0000000430 ) ESTIMATE STATISTICS     I     DBMAN     99
     16/11/2007     10:48:44     SAMPLE 10 PERCENT     I     DBMAN     99
     16/11/2007     10:48:44     SQL-END: 16.11.2007 10:48:44 00:00:00     I     DBMAN     99
     16/11/2007     10:48:45     Job BIDTPR_16328_1 no longer exists     S     BT     127
     16/11/2007     10:49:45     Technical status 'Green' (user ALEREMOTE)     S     RSBK     224
     16/11/2007     10:50:45     Status transition 8 / 8 to 8 / 8 completed successfully     S     RSBK     222
     16/11/2007     10:50:46     Overall status 'Green' (user ALEREMOTE)     S     RSBK     225
Can anyone help and tell me where i could search to improve performance...I don't want a plain vanilla answer but some leads to an answer would already be very helpfull
Thanks a lot in advance

Dear friends
I am also facing the same issue :
Below is the job log when the DTP is completed successfully,
Job started
Step 001 started (program RSPROCESS, variant &0000000391261, user ID BWREMOTE)
Performing check and potential update for status control table
Status 'Executable' (user BWREMOTE)
Status 'Active' (user BWREMOTE)
Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BIDTPR_335754_1 with ID 06532200
Job finished
But when its yellow forever or failed, I get the below Job log
Job started
Step 001 started (program RSPROCESS, variant &0000000391306, user ID BWREMOTE)
Performing check and potential update for status control table
Status 'Executable' (user BWREMOTE)
Status 'Active' (user BWREMOTE)
EXTRACTION OF DATAPACKAGE 000001
EXTRACTION OF DATAPACKAGE 000002
Job finished
Can anyone help, is this happening because there is no resouce available to schedule "RSBATCH_EXECUTE_PROZESS".
Any help is appreciated!
Regards
MultiABAP

Error in process chain variant when executing BI IP planning sequence

Hi All,
I am trying to execute a planning sequnce as a background job using a process chain. Here one of the variant failed giving an error as : Overflow occurred when calculating <Key figure name> with value 6.5231044352058409E18+.
I tried executing that process chain variant separately using the ABAP program RSPLS_PLSEQ_EXECUTE as a background job, but still its not working.
At last I tried executing the individual planning step in the planning modeler, but again the same error.
Earlier such case was resolved by compressing the planning cube requests and executing the failed variant using the ABAP program, but this time even compression is not helping to solve this.
Can anyone please help on this issue ?

Hi Andrey,
This Key figure is created of the data type CURR (Stored as decimal) for Amount type. Now the length of CURR is maintained by SAP as 17 with 2 decimal places, so do you mean that I have to switch to other data type to hold the large value that is getting generated.
My concern is : the error is coming for just one of the variant of the chain and not for other variants. If it has something to do with the KF data type, then certainly all others variants must have thrown the same error.

Error while Executing Process chains

Hi All,
Initially i have created infopack with full load and Executed it manually, later i have changed same infopack to Delta load and kept in Process chains, when i execute the Process chains, the start Process have get triggred, but my Process stops at load data.when i have check the log file it is showing the Below Message:
"Message_Type_x" " "
"CL_RSSM_LOADING===============CP" or "CL_RSSM_LOADING===============CM005"
In Sm37 it is showing
BI_PROCESS_TRIGGER is Finished
BI_PROCESS_LOADING is Cancled
Please help meto find out what might be the cause of this Error.
Note: The infopackage will get data from Generic data Source.
when i run the Process chains, the request is not going to R/3 Side.
Thanks and regards,
santosh.

Hi Santosh,
Go through this below note.
Note 852443 - Dump in include LRSSMU36/RSSM_OLTPSOURCE_SELECTIONS.
If Init is successfull then you can manually try the delta and check it.
Hope this helps
regards
KP
Asign points if helpfull

Process Chain - How to make decision based on data in PSA and execute DTP

Need to create process in Process Chain, which will execute the DTP based on data in PSA.
Say we have two DSO A & B, both getting data from same datasource.
In process chain, we need to read data in one of the date field in PSA and make a decision, which DTP to get execute in process chain.
Say if date field contains year = 2000, than load to DSO A, if year is 2001, load data to DSO B.
Suggest the solution. ...

Hi,
Tyr this steps.
1) Develop ABAP process types
ABAP report to read PSA data using function module
Trigger events based on year
event1 -> for even year data
event2 -> for add year data
2) Develop local process chains for each DTPs and schdule it with events mentioned above.
Do reply with comments.

Save a csv file on local host, executing a DTP Open hub in a Process chain?

Hi All,
my client has asked me to try if there is a way to save in the local host c:\ a .CSV file generated from an Open HUB executed by a DTP in a Process chain.
when i execute my DTP it work correctly and it save the .csv file on my c:\ directory.
my client doesn't want to give th users authtorization on RSA1 and want to try if there is a way to put the DTP in a process chain
and when executing the process chain every user can have the file on his own local c:\ directory.
i tried this solution but it doesn't work i get an error on executin the process chain:
Runtime Errors         OBJECTS_OBJREF_NOT_ASSIGNED
Except.                     CX_SY_REF_IS_INITIAL
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
     caught in
    procedure "FILE_DELETE" "(METHOD)", nor was it propagated by a RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    You attempted to use a 'NULL' object reference (points to 'nothing')
    access a component (variable: "CL_GUI_FRONTEND_SERVICES=>HANDLE").
    An object reference must point to an object (an instance of a class)
    before it can be used to access components.
    Either the reference was never set or it was set to 'NULL' using the
    CLEAR statement.
can you give some advices please?
Thanks for All
Bilal

Hi Bilal,
Unfortunately, DTPs belonging to Open Hubs wich are targeted to a local workstation file, can't be executed through a process chain.
The only way of including such DTP in a process chain is changing the Open Hub so that it writes the output file in the application server. Then, you can retrieve the file -through FTP or any other means- from the application server to the local workstation.
Hope this helps.
King regards,
Maximiliano

Process chain executed synchronously produces dump and hangs

Process chain (RSPC) being executed synchronously hangs on a step (not first) with yellow status. Analysis of ST22 shows there is dump: RAISE_EXCEPTION
The chain loads data from flat files on frontend to several characteristics (attributes and texts). All the steps are sequential.
After the start first file is loaded successfully (info package), subsequent data transfer process has no errors too. But the second info package becomes yellow and hangs just after ( after some time timeout occurs and the step becomes red). In ST22 i see dump, text of the dump is below. Analysis of the dump reveals that 'GUI_UPLOAD' FM doesn't work during execution of the second info-package.
The chain looks as follows:
1. Info package 1
 V
2. Data transfer process 1
 V
3. Info package 2 <------- hangs here because of dump
 V
4. Data transfer process 2
 V
Hangs on step 3 (infopackage 2).
Text of the dump:
Runtime Errors RAISE_EXCEPTION
Date and Time 10.10.2010 19:07:59
|Short text |
| Exception condition "NOT_SUPPORTED_BY_GUI" raised. |
|What happened? |
| The current ABAP/4 program encountered an unexpected |
| situation. |
|Error analysis |
| A RAISE statement in the program "CL_GUI_FRONTEND_SERVICES======CP" raised the |
| exception |
| condition "NOT_SUPPORTED_BY_GUI". |
| Since the exception was not intercepted by a superior |
| program, processing was terminated. |
| |
| Short description of exception condition: |
| |
| |
| For detailed documentation of the exception condition, use |
| Transaction SE37 (Function Library). You can take the called |
| function module from the display of active calls. |
| - |
|How to correct the error |
| |
| If the error occures in a non-modified SAP program, you may be able to |
| find an interim solution in an SAP Note. |
| If you have access to SAP Notes, carry out a search with the following |
| keywords: |
| |
| "RAISE_EXCEPTION" " " |
| "CL_GUI_FRONTEND_SERVICES======CP" or "CL_GUI_FRONTEND_SERVICES======CM00X" |
| "FILE_EXIST" |
| |
| or |
| |
| "CL_GUI_FRONTEND_SERVICES======CP" "NOT_SUPPORTED_BY_GUI" |
| |
| or |
| |
| "RSBATCH1 " "NOT_SUPPORTED_BY_GUI" |
| If you cannot solve the problem yourself and want to send an error |
| notification to SAP, include the following information: |
| |
|System environment |
| SAP-Release 701 |
| |
| |
| SAP kernel....... 701 |
| |
| Patch level. 69 |
| Patch text.. " " |
| |
|User and Transaction |
 |
| Program............. "CL_GUI_FRONTEND_SERVICES======CP" |
| Screen.............. "SAPMSSY0 1000" |
| Screen Line......... 6 |
| |
|Information on where terminated |
| Termination occurred in the ABAP program "CL_GUI_FRONTEND_SERVICES======CP" - |
| in "FILE_EXIST". |
| The main program was "RSBATCH1 ". |
| |
| In the source code you have the termination point in line 8 |
| of the (Include) program "CL_GUI_FRONTEND_SERVICES======CM00X". |
|Source Code Extract |
|Line |SourceCde |
| 1|method FILE_EXIST. |
| 2|* ... |
| 3| |
| 4| CLASS CL_GUI_CONTROL DEFINITION LOAD . |
| 5| |
| 6|*-check if valid GUI is available----
 |
| 7| IF IS_VALID_HANDLE( ) NE 0 AND cl_gui_control=>www_active IS INITIAL. |
|>>>>>| RAISE NOT_SUPPORTED_BY_GUI. |
| 9| ENDIF. |
| 10| |
| 11|* check parameter, wild characters not allowed |
| 12| IF FILE IS INITIAL OR FILE CA '*<>|"'. |
| 13| MESSAGE 'WRONG PARAMETER: FILE_NAME' TYPE 'I' RAISING WRONG_PARAMETER. |
| 14| EXIT. |
| 15| ENDIF. |
| 16| |
| 17|* special handling for SAPGUI for HTML |
| 18| IF CL_GUI_CONTROL=>WWW_ACTIVE IS NOT INITIAL. |
| 19| |
| 20| DATA: rc type i, filename(4096) type C. |
| 21| filename = file. |
| 22| CALL FUNCTION 'ITS_QUERY' |
| 23| EXPORTING |
| 24| filename = FILEname |
| 25| query = 'FE' |
| 26| IMPORTING |
| 27| return = rc. |
|Active Calls/Events |
|No. Ty. Program Include Line |
| Name |
| 8 METHOD CL_GUI_FRONTEND_SERVICES======CP CL_GUI_FRONTEND_SERVICES======CM00X 8 |
| CL_GUI_FRONTEND_SERVICES=>FILE_EXIST |
| 7 FUNCTION SAPLSFES LSFESU16 96 |
| GUI_UPLOAD |
| 6 METHOD CL_GUI_FRONTEND_SERVICES======CP CL_GUI_FRONTEND_SERVICES======CM013 4 |
| CL_GUI_FRONTEND_SERVICES=>GUI_UPLOAD |
| 5 METHOD CL_RSDS_ACCESS_GUI_UPLOAD=====CP CL_RSDS_ACCESS_GUI_UPLOAD=====CM001 74 |
| CL_RSDS_ACCESS_GUI_UPLOAD=>IF_RSDS_EXTRACT_DIRECT~EXTRACT |
| 4 FUNCTION SAPLRSDS_BACKEND LRSDS_BACKENDU01 304 |
| RSDS_DATA_PULL |
| 3 FUNCTION SAPLRSSM LRSSMU17 5422 |
| RSSM_CALL_RSAR_DATA_REQUEST_1 |
| 2 FORM RSBATCH1 RSBATCH1 1327 |
| START |
| 1 EVENT RSBATCH1 RSBATCH1 498 |
| START-OF-SELECTION |

If i load the step manually it works. The hung step is possible to re-execute after it gets red (with context menu) and it works then. After that it hangs on the 3rd info-package and so on.
The file lays on a network drive, but i suspect it doesn't matter

Process chain - After error ABAP - trigger a metachain start does not work.

Hi,
I have a process chain, where after an ABAP runs into red (ERROR MESSAGE triggered), another process type, like start a new meta-chain, or start an infopackage starts.... But is does not work. After i go to logs, it asks me whether i want to trigger the following jobs, if i choose yes, it works. But i need to start it automatically, when the ABAP Routine has an error message (RED) in the chain.
Any idea, because I tried to solve it all the day, but i did not manage to get itwork...
Many Thanks,
L.

Hi,
the problem is not the ABAP Program.
I have the following situation:
A Metachain contains as second step a call of local chain. After the local chain, according to the status of it (green o red), we have other different steps. So we have two different link (red and green) starting from the local process chain step.
Inside the local process chain there is the ABAP program that check several parameters and if something is not as expected fails with status red. if this situation happens, the local process chain becomes red and in SM37 inside the job i see the error that i forced, but the status is not triggered to the first metachain , so the corresponding following steps are not triggered.
This issue happens only if fails the ABAP program because, for example, a Infopackages loading fails every thing works and the corresponding steps in the metachain are executed.
In the ABAP program in order to force the status red we have the following code:
MESSAGE e162(00) WITH 'Status' 'Red'.
Any idea?
Thanks,
Veronica

Process Chain Red 'X', Exec Infopckg Yellow, Infopckg monitor/data correct

Dear and respectable colleagues of the forum,
I am experiencing a problem in a process chain when executing infopackages. The process chain has 6 "Execute infopackage" processes. Sometimes (1 of 4 attempts average) my process chain ended with red color with 'X' status in the Process Chain Display Log View.
Reviewing within the chain Log, there is one of the "Execute infopackage" processes that appears in yellow color (it loads from direct update ODS to an infocube). However, revising the Logs for its corresponding Infopackage execution I found that it says that "Data successfully updated". Moreover, If I review the data loaded it seems to have been loaded correctly.
Then, Why does the "Execute infopackage" process in PC finishes with yellow color if the Infopackage execution itself finishes correclty?
To complete the whole scenario: I execute this process chain every night from an Abap program; the program has a Loop that traverses a table, and executes the process chain as many times as the quantity of rows in that table (table has 10 rows meaning offices). As you can understand, the chain is executed 10 times, and the error occurs in any of the 6 "Execute infopackage" processes indistinctly.
I review ST22 and SM37 for all users for the datetime when the error occured butnothing bizarre was reported. It is left to review SM21.
The following is the detail of messages.
Logs for Execute Infopackage
   Data successfully updated
Monitor of Infopackage
Details Tab
     Requests (messages): Everything OK
     Extraction (messages): Everything OK
     Transfer (IDocs and TRFC): Everything OK
     Processing (data packet): Everything OK
       Data Package 1 ( 45 Records ) : Everything OK
         Transfer Rules ( 45 -> 45 Records ) : No errors
         Update rules ( 45 -> 45 Records ) : No errors
         Update ( 45 new / 0 changed ) : No errors
         Processing end : No errors
     Process Chains : Errors occurred
       Llena cubos de carteras vtas sec por distrib - autom

Dear s v desh,
I am on SAP BW 3.5, I already checked the cube and it is green - all right.
The message in the infopackage excution node in the process chain says (non-error):
"Data successfully updated"
The error message in process chain monitor (log) says:
......"Overall status: Error occurred: or: Missing messages
............Process Chains : Errors occurred"
I just realized that there is no messages at all in the infopackage monitor (log).
I have received a clue, someone asked me to review note 1396417, and I will.
Regards
Juan Alonso Teevin

Broadcasting through process chains

How to broadcast reports to indivdual mailboxs in the company through process chains. say current data should be broadcasted into individual email account every time a new sales order or purchase order is created or by the end of the day , it should automatically trigger the mail with the report. can anyone help on this.

Hi,
Here see the blog details.
The goal of information broadcasting is to distribute the right information, in the appropriate format, to the right people, through different channels, at the right time.
With the BEx Broadcaster, you can precalculate queries, query views, Web templates, reports and workbooks and broadcast them by e-mail or to the portal. In addition to the precalculated documents in various formats (HTML, MHTML, ZIP and so on) that contain historical data, you can also generate online links.
Accessing the Broadcaster
The broadcaster can also be accessed via the Portal through the delivered BI Role.
You can determine the Scheduling for Information Broadcaster
Based on a data change event triggered by a process chain.
Based on a pre-defined time point.
Freely definable scheduling.
Steps to Schedule Information Broadcaster based on a data change event triggered by a process chain
Create the Query in the Query Designer.
Execute the report in the BEx Web Analyzer.
Click on u201CSendu201D to create the settings for broadcasting.
The Broadcast Wizard takes you through a series of prompts where you supply the key information required to develop a broadcast. At any time you can leave the Wizard and use the standard settings dialogs which offer more settings.
Then schedule the broadcast. If you start the Broadcaster for a query (or template or workbook) that gets data from an InfoProvider that will be selected in the process chain, you can select the InfoProvider for Scheduling.
Create the process chain and include the event data change, include process type "Trigger Event Data Change (for Broadcaster), itu2019s available under "Load Process and Post -Processing".
The Process Chain is created including the process types: (1) Start (2) Execute InfoPackage (3) Delta Data Transfer Process (4) Activate DSO (5) Trigger Event data Change.
When you create the Variant for the Event Data Change, using checkbox we can indicate when the Broadcast should trigger.
As soon as that InfoProvider is affected by a Process Chain, the Broadcasting is triggered.
After successful activation you can now schedule your chain. Press button u201CScheduleu201D or menu u201CExecution -> scheduleu201D. The chain will be scheduled as background job. You can see it in SM37. You will find a job named u201CBI_PROCESS_TRIGGERu201D. Unfortunately every process chain is scheduled with a job with this name. In the job variant you will find which process chain will be executed. During execution the steps defined in RSPCPROCESSCHAIN will be executed one after each other. The execution of the next event is triggered by events defined in the table. You can watch SM37 for new executed jobs starting with u201CBI_u201D or look at the protocol view of the chain.
You can monitor the Broadcaster from the SOST transaction.
Note:
Depending on authorizations, end-users can schedule their Broadcasting Settings.
Only for those queries which are checked "Execution with Data Change in the Infoprovider" while you schedule, will be triggered by process chain event.
You may wish to refer the Note on Settings for Information Broadcasting- 760775
Hope this help you
Regards,
Rakesh

Process Chains Variants

Hi,
I have a number of Process Chains running in my company. Is there a way to know the technical variant name and technical job name for these Process Chains.
That way when I go to SM37 and check, I can make out the jobs and variants related to these process chains that are running.
Please let me know. Any help is deeply appreciated .
Thanks

Hello Arvind
Here is answer for your queries...
The table RSPCLOGCHAIN would give you the information regarding which chains are running/completed/failed etc.
The table RSPCPROCESSLOG would give you, which process step in the process chain is actually executing.
Once you know the Chain Name, for which you want to get the status, use the following function modules
RSPC_API_CHAIN_GET_STATUS
Gives you if a chain is running/completed/failed.
RSPC_API_CHAIN_GET_LOG
Gives you a detailed log of the process chain(Each steps)
The tables mentioned above would give you the following information
R Ended with errors
G Successfully completed
F Completed
A Active
X Canceled
P Planned
S Skipped at restart
Q Released
Y Ready
Undefined
J Framework Error When Ending (e.g. Subsequent Job Missing)
Thanks
Tripple k

Event is not getting triggered in the process chain

Hi,
We had a process chain which was triggered by an Event, and it was running fine until few days ago. So I removed the chain from schedule and re-scheduled it again with these details:
File load: every 2 hrs
Process chain setting
Immediate tab: start immediately
After event: "event name" and "parameter name" and periodic job: ticked
I activated the chain and scheduled it. But the event is not triggered and the chain does not start. I even tried to trigger the process chain manually in sm64 but the process chain did not start.
Can someone please tell me steps to automate the event triggering and also any setting that should be taken care off in the info package and the process chain.
Thanks In advance.
Ram

Hello Ram, to start your Process Chain by an event, then you need to maintain the Start process of the process chain.
Select "Direct Scheduling".
In the Change Selections, press After Event. Put your event name and parameter (if any). Also click on Periodic job.
Press Save. Then Activate and Schedule your process chain. All your processes should turn green.
To verify, right-click on the Start process and select Displaying Scheduled Job(s).... You should see a job called BI_PROCESS_TRIGGER in a Released status. You can click on the job and look at the start conditions.
When you go to trigger the event, use the same event name and parameter (if any) as in the start condition. Your process chain will then execute. To insure, use RSPC to view your process chain and press the Logs icon (last one at the top).
Does this help?

Process Chain changing start time?

hi guysm i have 76 process chains that run every day in BWD system, so i removed all the timings from the start variant and in the infopackages, but it seems some process chains are still running, i did do the following steps on chnaging the time from a particular time to immediate, Save, Check and activate, i didnt schedule it as i dont want it to load right away .
do i have to hit check , save , schedule once i change the time from a particular time to immediate load or activate will work as well.?
what else could be the cause of process chains still loading even there are no events, or time given to any process chains at all.
i went to sm 37 and i can see the bi process are all running at the time they were orignially set up on.
so any suggestions would help,
is there any way from sm 37 i can tell which process chain is triggered off?
thanks
Dante(devils never cry)

Dante, the start conditions on the infopackages do not affect when they run in process chains. The process chains have their own start job. If you want to change the start time of a process chain, then you need to go to maintain the process chain, right-click on the Start process and select Displaying Scheduled Job(s)... . Here you will see a job called BI_PROCESS_TRIGGER. Change the start conditions of this job.
The start job for all process chains is BI_PROCESS_TRIGGER, so using SM37 may be difficult to identify which BI_PROCESS_TRIGGER job is associated to a particular chain.
Also, to let you know, each process in a process chain has an associated job. All jobs called BI_PROCESS_xxxxx are jobs associated with a process chain.
Eg.
BI_PROCESS_LOADING is an infopackage.
BI_PROCESS_TRIGGER is the start job
Does this help?

PROCESS CHAIN TO BE EXECUTED by SM37

Similar Messages

Maybe you are looking for