Process chain transport in BI7.0 from DEV system to PROD system

Hi experts,
I have to create a process chain of master data loading, and i have created the process chain in DEV system, now i want the same in the production system, can you please suggest me which way i do
1) create the same process chain in Production system directly or,
2) should i transport the same process chain to production system, i created in the development system.
and please tell me that what kind of problems in future i will face by following the above steps when the project will be in support state.
thanks in advance for all your expertise experienced help.

It is always advisable to transport the process chain from DEV to Production. You can just do this by simply gather all the necessary objects for process chain into your transport.
During the support phase, you have to monitor the data load through process chain. That can be done via transaction code rspcm. In case there is any error in the process chain ( various errors can be there, data loading error, delta error). In that case you have to go to the step of the process chain when the error occurs (it will be marked as red) , rectify the error and process the step manually at the point so that the following process finishes.
Hope this is clear now.

Similar Messages

RC 8 error while transporting the query from Dev to Qa - Element missing

Hi All,
I have made a multiprovider by copying one existing one.
I have copies one of the Bex queries using RSZC from the source to Target MP.
While transporting the query from Dev to QA i have got the following error. (I have already moved the Multi Prov in a previous TR)
Has anyone seen similar types before. Any inputs will be highly appreciated.
Start of the after-import method RS_ELEM_AFTER_IMPORT for object type(s) ELEM (Activation Mode)
Error when activating element 4LUSZK561QN74UDBJ7BPU9GFM
Element 4LUSZJXHIS1HM7TVDD9DK7HPU is missing in version M
End of after import methode RS_ELEM_AFTER_IMPORT (Activation Mode) - runtime: 00:00:06
Start of the after-import method RS_ELEM_AFTER_IMPORT for object type(s) ELEM (Delete Mode)
End of after import methode RS_ELEM_AFTER_IMPORT (Delete Mode) - runtime: 00:00:14
Errors occurred during post-handling RS_AFTER_IMPORT for ELEM L
RS_AFTER_IMPORT belongs to package RS
The errors affect the following components:
   BW-WHM (Warehouse Management)
Post-import method RS_AFTER_IMPORT completed for ELEM L, date and time: 20110517070045
Post-import methods of change/transport request BDAK959603 completed
     Start of subsequent processing ... 20110517070025
     End of subsequent processing... 20110517070045
Kind regards,

Hi Jith,
First of all try to consolidate all your objects in a single TR and then move to Q from D.
In this case check for the list of objects that you have in your TRs. If TR 3 have all the Objects that were in TR1, TR2, then transporting TR3 alone will work.
Also, you can find the information related to the elements that were missed in your TR1,TR2 by following process.
1. Go to your transport Logs and then to the entries marked as Error.
2. There you will find the Query Element Ids, copy them
3. Now, go to Table(Se16) RSZELTDIR, there enter those query elements.
Now, you can able to find the elements that you have missed in your TRs. Hope this helps you.

Error while transporting Data sources from DEV to Qual

System : SCM 5.0 (SP 8), BI 7.0 (SP 12)
1) We are trying to transport Data source objects from Development server to Quality server.
2) Data sources of Type R/3 and Web Service.
3) We are able to transport the objects from Dev.
4) Once we import the objects to Quality server, the objects are becoming into INACTIVE stage.
Please help... Thanx in advance..
Regards
Manoj

HI tanu,
could you let me know how you have solved this issue.
which object not active.
i am having the same issue now.
kris

How to transport modified query from Dev to QA??

Hi All,
I have made a few changes to a query that has already been transported to QA from Dev. I have removed an Infoobject and introduced a new Infoobject and other such changes.
Now I would like to transport the "new version" of the same query from Dev to QA again so that all the new changes are reflected in QA environment as well.
What steps or procedures do I need to follow for this please?
Thanks for your time,
Regards,
Reddy

Reddy,
BW reporting objects (query / Workbook / WAS tempalte) change transport system is different than other BW development objects (Infoobjects, cubes, transfer/update rules etc..).
Before you start making changes to any Query objects (which are already transported before), first you need to assign the respective Request in the "Transport Connection" tab (click on the BEX with truck symbol icon) and assign your request with the package name.
hope this helps a little..
Good luck
Mavi

Transporting SLD objects from DEV to PROD

Hi,
I need to move My SLD objects from DEV to PROD. There is no QA. Also SLD is not common across DEV and PROD.
Thanks!!
Regards,
Miten.

Hi,
How to handle SLD for Tranporting Dev to Quality ser
https://service.sap.com/~sapdownload/011000358700001684302005E/HowToSLDandXI.pdf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0fa2c490-0201-0010-61b4-df12869c4753
Transporting XI from DEV to QA
Transporting XI from DEV to QA
using CMS system. in XI
1. /people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
2. /people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
3. /people/sap.india5/blog/2005/11/28/xi-software-logistics-solution-iii-cms
4. /people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi --> Overview of Transition from Dev to QA in XI
5. /people/sravya.talanki2/blog/2005/12/20/inconsistencies-while-transporting-rfc-objects-from-dev-to-qa-150-sp12
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
http://help.sap.com/saphelp_nw2004s/helpdata/en/93/a3a74046033913e10000000a155106/content.htm --> Transporting XI Objects
http://help.sap.com/saphelp_nw04/helpdata/en/ef/a21e3e0987760be10000000a114084/content .htm --> Configuring Groups and Transport Targets
Look into this blog for how to export / improt IR and ID objects,
/people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
Please go through these links which actualy show you how to configure CMS and also gives you all information regarding it.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/43f5d790-0201-0010-2984-ff72d822b109
http://help.sap.com/saphelp_nw04/helpdata/en/de/a4214174abef23e10000000a155106/content.htm
/people/daniel.wirbser/blog/2005/10/27/tcsfilecreateexception--error-while-assembly-of-software-components-in-nwdi
http://help.sap.com/saphelp_nw04/helpdata/en/f6/719a2172f74b67b150612a7cd3b7df/content.htm
http://www.sap-hefte.de/download/dateien/964/074_lesesprobe.pdf
Here are some blogs.
/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
Re: Moving project from Dev to QA
Error while exporting/transporting the Business system from Dev to Quality
Transporting the scenario frm Dev Server to PRD Server
transporting data from Dev to quality using CMS
Regards,
Phani
Reward points if Helpful

Process Chains transport query

Hi Experts,
When we transport a process chain from rsa1, does not all its varients get transported along with it , do we need to collect them separately,
Please help.
Thanks in Advance,
Nitya

Hi Nitya,
You will have to collect each & every process in the process chain. Better way to collect all processes in PC is:
goto RSPC & open your PC--> From the Menu Process Chain --> Transport.
Now all the dependent objects will be opened. Display it as List > Now select all the required Variants like start variant, and any other variants like AND, OR, DSO activation etc & right click only on the required objects> Transport all below.
Hope it helps!
Regards,
Pavan

Error while transporting Dimension Members from Dev to Quality

Hi all,
I am having issue while I am transporting dimension members from dev to QA, The error log is as below; i am not sure what could be wrong;
Start of the after-import method UJT_TLOGO_AFTER_IMPORT for object type(s) AAPS,AMBR ( )
Member formula expanded for imported master data
Start of data checker messages for Appset XXXX
Possible Dead File/Dir:
Possible Dead File/Dir:
Possible Dead File/Dir:
Possible Dead File/Dir:
Error occurs when checking member formula use on other dimensions
No access to environment 'XXXX'
No access to environment 'XXXX'
BPF: Error reading master data
No access to environment 'XXXX'
Errors occurred during post-handling UJT_AFTER_IMPORT for AAPS L
UJT_AFTER_IMPORT belongs to package UJT
The errors affect the following components:
EPM-BPC-NW-TRA (Transport)
please advise.
Thanks.
Ambika

hi Raju,
i tried after giving full access but again same error:-
please see the error log below:-
Start of the after-import method UJT_TLOGO_AFTER_IMPORT for object type(s) AAPS,AMBR ( )
Member formula expanded for imported master data
Start of data checker messages for Appset PETFAS
Possible Dead File/Dir:
Possible Dead File/Dir:
Possible Dead File/Dir:
Possible Dead File/Dir:
Error occurs when checking member formula use on other dimensions
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
InfoObject catalog /CPMB/PETFAS_CHAR is not available in version A
BPF: Error reading master data
No access to environment 'PETFAS'
End of data checker messages for Appset PETFAS
End of after import methode UJT_TLOGO_AFTER_IMPORT (Aktivierungsmodus) - runtime: 00:00:
Starting after import method UJT_TLOGO_AFTER_IMPORT for object type(s) AAPS,AMBR in dele
End of after import methode UJT_TLOGO_AFTER_IMPORT (Löschmodus) - runtime: 00:00:00
Errors occurred during post-handling UJT_AFTER_IMPORT for AAPS L
UJT_AFTER_IMPORT belongs to package UJT
The errors affect the following components:
EPM-BPC-NW-TRA (Transport)
any suggestion..
thanks,
Ambika

What is the best Method to transport KMC from DEV to QA & PROD

We are trying to figure out what is the best method to transport KMC from DEV to QA & PROD. Your help and feedback is greatly appreciated.
David

hi,
Refer this thread.
How to transport KM content and configration?
Regards,
Ganesh N

Problem with a process chain transport

Hi all,
I have a problem with a process chain transport, I transport it but when I see the changes in testing environment I dont see it, I did it four times but nothing happen and I dont have errors.
Can anybody tell me how to transport a process chain.
Thanks.

Hi Federico,
When you tranport Process Chains, initially chains will be available under "Not Asigned" node in RSPC Transaction. The transported chains wont be get highlighted automatically. Manually need to open the chain in update mode and activate it on Quality.
Hope it will help you to resolve the problem.
Regards,
Raji

Transporting a routine from dev to Quality

Hi Frnds,
I have transported a transformation from Dev to Quality. After that i got a requirement, so that i have written routine for a infoobject in Dev. Now i want to transport only that routine to quality.
Here in transport connection i am not able to find out the routine bcoz this transformation having more than 20 routines.Here in transport connection routines are with technical names.
How can I find out my routine technical name?
Or Is there any other way that i can transport this routine only into quality?
Regards,
Sridhar

Hi Sridhar,
Surely you can collect everything and transport it will not impact anything existing. Only if you have made some changes to the transformations in development that are not in quality, will be moved to quality.
Simple way to collect small objects is go to the change mode of the transformation it will ask you for transport request. Give the request number and it is ready for import in quality.
Hope this helps.
Regards,
Viren

Transport using CMS between Dev, Qual and Prod

Hi,
I'm a little bit curios if there are others out there using CMS for transport in a XI production line -
Dev -> Qual -> Prod.
My company is using it, and it seems to me that at consolidation stage, you can only select transports related to a SWCV and NOT select transports individually or related to a namespace?
Anyone?
Our version is XI 3.0 SP14 latest patch.
best regards
Torstein Nesby

Hi Torstein,
I saw your other threads related to this as well as your thoughts on 'Quality Feedback' (which I agree with btw). It sounds like you may have been able to come to a resolution to a problem that continues to cause me issues. Can you review and provide some guidance on the following please?
Current Environment / Setup:
- XI 3.0 system, SP12
- Single SLD with appropriate Group / transport Targets setup
- Single IR Track, Single ID Track
- CMS usage for transports. Successful from Dev to QA, QA to Prod has not yet been attempted.
- SWCV are setup in IR and are specific to tech system / product. For example there is a SWCV for Peoplesoft where all related message / data types for Peoplesoft are located. There is another SWCV for SAP, another for Oracle, etc.
- Message Mappings and Interface Mappings are created in the target SWCV. This means that a single interface will normally consist of 2 SWCV to be migrated.
- Currently migrations are bundled in Transport (export) lists vs change lists when migrated out of the Dev environment
- As an aside, I understand the approach of effectively setting up a SWCV per interface with Usage dependencies across SWCV's for reuse of data / message types, however this is the architecture that was recommended at the start of development for this first release.
What I am attempting:
- In the Assemble tab in the transport Studio I want to be able to use a 'Subset Assembly' option to selectively choose which transport / change lists to allow to go to production.
- Based on reading the SAP Help in the XI system, numerous SDN Posts, the SAP docs "Using CMS for XI 3.0" and "How to Transport XI Content Using CMS" it appears this option should be readily available for both the IR AND ID.
Issue:
- For both the IR and ID when I go to the Assembly tab and get the subsequent popup (after "Assemble Components") the "Subset Assembly" option is not visible. Supposedly when going to this Assembly tab, selecting a specific SWCV (not the default 'All Components' option), and choosing "Assemble Components" generates a popup with a checkbox listed for "Subset Assembly". I get the popup in both the IR and ID but the "Subset Assembly" checkbox is not part of the window.
The docs are somewhat unclear in this area. It alludes to seeing this option after the initial migration to Prod is done (which again we have not done yet), but only mentions this in the context of the ID. Another doc alludes to seeing Emergency Transports created in CONS (QA) as if that may be a pre-req to having that option, but is a weak reference.
Can you advise on:
1) Do you see the "Subset Assembly" option in the popup?
2) If so:
a) Did you see it prior to the inital migration to Prod?
b) Do you see it for both the Directory and Repository in the Transport Studio Assembly?
3) Any other thoughts on why I'm encountering this issue?
Thanks for your help!
Darin

Process chain Transport error in BI7

Hello All,
              We are facing an error while importing a transport request in the BI7 system. The objects collected in the transport request are
InfoPackage
Process chain
Process variants
Table Contents
The error which we are facing is as follows,
Start of the after-import method RS_RSPC_AFTER_IMPORT for object type(s) RSPC (Activation Mode)
Version 'M' of chain LAP_ROM_CS_LOAD_DAILY was saved without checking
Results of check for process     in chain :
Results of check for process     in chain :
Results of check for process LOADING ZPAK_3GBB2YPFIQL01BW1IDLUNON45 in chain LAP_ROM_CS_LOAD_DAILY:
Kindly let us know if you had faced similar problem before.
regards,
Chandran

Hi Chandran,
I think that if you expand the transport/import log further there will be a more detailed error message. Can you
check this? If yes can you let us know what the error message text and error code is? It might be the case that
the note 659160 is relevant for the problem.
Best Regards,
Des.

Error in Process Chain while extracting data from source system

Hi All,
Dail we are facing problem while retrieving the data from source system for the data source 0TB_AMOUNT1 in the process chain, it is giving error "Function module BANK_TMC_API_SIM_GET does not exist Furnction module". when I repeat the step than it is going fine.
Please let me know why this error is coming for first why it is not coming after repeating the step?
Thanks & Regards,
Murali.

Hi Murali,
Hope you are doing good..
Is it a full or Delta load on a daily basis? Did you check if the FM exists in your system?
Did you try debugging the load in source system and check if the extractor is trying to call FM you mention.
If possible please post the exact error message you are receiving so that we could get an idea whats the error and why you are encountering it.
As of now what i can suggest is, go to RSA2 in source system, give the datasource name and check if the extractor code has FM in it.
Regards,
Anil Pragada.

While transporting Key Figures from Dev to Quality system, error occured.

Hello Experts,
While transporting Key Figures from Development to Quality system, I am getting this error : " /BIC/AZPA1R_CT40-/BIC/ZPA1RBA10 (specify reference table AND reference
field)".
Here, I have changed the data type of the key figure from Number type to Amount type. Then I activated them, captured in request and when transported I got the error saying "/BIC/AZPA1R_CT40-/BIC/ZPA1RBAL9 (specify reference table AND reference field)"
These Key Figures are used in ODS.
Is there I am missing something, please tell how can I make these transports successfull.
Thanks Ishdeep.

While transporting Key Figures from Development to Quality system, I am getting this error : " /BIC/AZPA1R_CT40-/BIC/ZPA1RBA10 (specify reference table AND reference
Yes you missed to transport reference object.
Previously key figure data type is number then you have changed to Amount. While changing data type to amount You should maintain reference char like 0currency, Doc_currency......in the Unit/currency tab. ( If you use fixed unit or currency no need to maintain any reference Object).
During transpotation you need to collect this reference char with main key figure and then transport.
With Regards,
Kishore.

Process chain transport

Hi Gurus
i hve created a process chain to load data to cube. All the objects are already in prod. like cube, IP, DTP.
Now the question is --> The DTP which is in the prod. system is not same as in dev. (may be somebody has deleted it)
So should i transport the DTP first in a seperate request or can transport the DTP with the process chain
Thanks
BIT

Hi,
This happens in few scenarios... i'm not sure in which case... this happens ,you can check in your system from DEV to QA there will be change.
@Deepak - Transformations and DTP technical names get change from DEV - QA for clarification on this you can cross check in you system itself.
@Bit_sun - yes you can assume that IP technical names will not change and the DTP n Transformations technical names will change not the descriptions.

Process chain transport in BI7.0 from DEV system to PROD system

Similar Messages

Maybe you are looking for