Process chain transport issue: variant
Hi xperts!
I've an issue regarding incomplete transports of process chain variants.
I've maintained the variant description & the recipient list.
When the request is imported in QAS, I'm missing the details of the variants. QAS-table RSPCVARIANTT is empty regarding type MAIL.
In addition the recipients 've not been imported too.
How can I transport the missing settings?
Pls. give an advice. Txs a lot in advance.
Hermann
Hi,
would suggest you to go by this..
in the RSPC t-code go to the chain you want to transport and activate each step and sub chain if any...firsy and store it in a temporary request ....and then click on the truck button the top.....it will take you to the transport connection and there you can see obnjects are still in temp TR.
delee these TR now refresh the window of transport connection and you will see that it's not present in any TR now.
once done just select the main chain and then again create TR.
this time you can see it contains all the objects.
try to keep only necessary objects and delete all the unwanted objects from that.
Thanks
Similar Messages
-
Process chains transport issue
Hi Friends,
I have transported some Master Data Process chains from Dev>Acc>Qty.
When i release the transports they have gone succesfully to my ACC from there when they are moved to Qty couple of Process chains are comepletely Out of sync. I have retransported them again but its the same no change.
Did anyone come across such a strange problem? if yes how did you solve it, Please guide me with your experienc.
Thanks in adv.
Regards
BNHi Saveen,
Thanks for your quick reply. I checked the log in se01 of my quality system, it shows no everything as succesful Return Code = 0.
Any other idea?.
Regards
BN -
Transportation of process chains with ABAP variants
Hi,
Could you please help me in finding out how to transport process chains with ABAP variants.
I can transport them, however when transporting them, I overwrite the already existing variants, which is very unfortunate...
Could you please advice.
Thank you in advance!
/BrianHi Ramesh,
Option 1:
You can directly create the process chain in Production. Most of the times ppl do have access to create a process chain in Prod. Kindly check whether you have the authorization to do so.
Option 2:-
I did not suggest to delete the old info-packages in QA and Prod. Let them continue to exist but you may not use them once the process chain is in place. You create the process chain, test it and move it up to Prod. I dont' think the new infopackages will hamper your delta load. The delta is not dependent on the infopackage.
If I were you, I would try the second option and if it does not work during testing then go for the first option.
Bye
Dinesh. -
Process Chains transport query
Hi Experts,
When we transport a process chain from rsa1, does not all its varients get transported along with it , do we need to collect them separately,
Please help.
Thanks in Advance,
NityaHi Nitya,
You will have to collect each & every process in the process chain. Better way to collect all processes in PC is:
goto RSPC & open your PC--> From the Menu Process Chain --> Transport.
Now all the dependent objects will be opened. Display it as List > Now select all the required Variants like start variant, and any other variants like AND, OR, DSO activation etc & right click only on the required objects> Transport all below.
Hope it helps!
Regards,
Pavan -
Process Chain Transport import error
Hi
I created a Process chain with Start variant "Start Using Meta Chain or API" and collected all the objects of process chain in a transport request
The Transport import failed with RC 8 error
Error Log:
Start of the after-import method RS_RSPC_AFTER_IMPORT for object type(s) RSPC (Delete Mode)
0 Chains Were Selected
Specifying process chain ID 'XXX, type V2&', and variant '' has resulted in the selection of 0 process chains. The selection has been called without confirmation by the user. This means that the user was unable to make a selection.
Please update me what is the reason of error and how to resolve this
ThanksIt sounds to me like process chain (PC) that's starts up PC that you trying to transport is not present in target system yet ?
Might be that there is a link between them... -
Problem with a process chain transport
Hi all,
I have a problem with a process chain transport, I transport it but when I see the changes in testing environment I dont see it, I did it four times but nothing happen and I dont have errors.
Can anybody tell me how to transport a process chain.
Thanks.Hi Federico,
When you tranport Process Chains, initially chains will be available under "Not Asigned" node in RSPC Transaction. The transported chains wont be get highlighted automatically. Manually need to open the chain in update mode and activate it on Quality.
Hope it will help you to resolve the problem.
Regards,
Raji -
Process chain Transport error in BI7
Hello All,
We are facing an error while importing a transport request in the BI7 system. The objects collected in the transport request are
InfoPackage
Process chain
Process variants
Table Contents
The error which we are facing is as follows,
Start of the after-import method RS_RSPC_AFTER_IMPORT for object type(s) RSPC (Activation Mode)
Version 'M' of chain LAP_ROM_CS_LOAD_DAILY was saved without checking
Results of check for process in chain :
Results of check for process in chain :
Results of check for process LOADING ZPAK_3GBB2YPFIQL01BW1IDLUNON45 in chain LAP_ROM_CS_LOAD_DAILY:
Kindly let us know if you had faced similar problem before.
regards,
ChandranHi Chandran,
I think that if you expand the transport/import log further there will be a more detailed error message. Can you
check this? If yes can you let us know what the error message text and error code is? It might be the case that
the note 659160 is relevant for the problem.
Best Regards,
Des. -
Process chain tranporting issue
Hi,
I have creaeted a process chain and it is working fine in Development.
Now I have created a transport request in Transport connection and collected the relative objects (like Infopacakges, DTPs ,Varients etc)and released it to Quality..
Now in Quality..
I )..I could not see the chain in Display mode.. Once I turn to Change, I can see it.
2) Everything is transported correctly. But there are duplicated in DTPs. Each process has duplicate DTPs..
I dont know where I am wrong. This is my first time transporting Process chains...
Thanks in advance
ManuHi Arun,
... But my client wants to be transported without any changes in Quality and Production. As per the requirement it has to be transported.
also Please write in detail....I did not understaand your first sentence..
my issues are:
1. It is showing 2 DTPs in Quality ..actually it should be one
2. Process chain not visible in Display mode.. only Change mode it is visisble...
Thanks
Manu -
URGENT-Process Chain - transport error
Hi
I am facing a problem in process chains
when I tranport to quality system my chains are not activated after importing it is raising the error as
Error in remote call of destination ABAP Connection
Message no. RSPC051
Diagnosis
The following error occurred during the remote function call for destination ABAP Connection:
Name or password is incorrect (repeat logon)
System Response
A short dump has probably been written in the other system.
Procedure
Look at the short-dump overview in the other system.
I am unable to get the solution!!!!! how to activate the chains in Quality.........It sreally urgenthi,
chk the start variant of ur process chain whether an start immediate is choosen, if so change it to some date in future and try to transport.
Ramesh -
hi .
When scheduling Process chain to run periodically on daily basis we found an issue. If process chain is scheduled to run daily at 00:00:10 from 2/8/07 onwards.It's released the job at 00:00:10 from 3/8/07.
It means it's moving job to next day from schedule date when it is scheduled to run between 00:00:10 to 01:45:00
If we schedule it to run daily at 01:50:00 from 2/8/07 then it's releasing job at same date and time which is correct?
Is it because of any Basis settingHi Rupesch
This happen sometimes when you activate for the first time the chain, I m not sure why, but we had the same issue in our 7.0
Anyway, you can solve that, after you schedule your chain, go to your start variant,/see "all jobs" / and change the job from sm37.
Hope this help you -
Using Planning Sequence in a Process Chain With input variants
Hi,
I have a COPY planning function which has multiple FROM and TO options like (From:Fiscal Year To Fiscal Year, From Version TO Version). In the layout they select the options for which they want to COPY and execute the function.
How can I replicate the same approach in a process chain with the varaints, how can i create the FROM and TO variables in the process chain.
Thanks
Rashmi.Hi.
You can save variable variant for planning sequence in modeler and then use it in process chain.
In process chain you choose "Execute planning sequence" and add planning sequence with variant.
All this if you using IP instead BPS.
Regards. -
Process chain transport in BI7.0 from DEV system to PROD system
Hi experts,
I have to create a process chain of master data loading, and i have created the process chain in DEV system, now i want the same in the production system, can you please suggest me which way i do
1) create the same process chain in Production system directly or,
2) should i transport the same process chain to production system, i created in the development system.
and please tell me that what kind of problems in future i will face by following the above steps when the project will be in support state.
thanks in advance for all your expertise experienced help.It is always advisable to transport the process chain from DEV to Production. You can just do this by simply gather all the necessary objects for process chain into your transport.
During the support phase, you have to monitor the data load through process chain. That can be done via transaction code rspcm. In case there is any error in the process chain ( various errors can be there, data loading error, delta error). In that case you have to go to the step of the process chain when the error occurs (it will be marked as red) , rectify the error and process the step manually at the point so that the following process finishes.
Hope this is clear now. -
Hi Gurus
i hve created a process chain to load data to cube. All the objects are already in prod. like cube, IP, DTP.
Now the question is --> The DTP which is in the prod. system is not same as in dev. (may be somebody has deleted it)
So should i transport the DTP first in a seperate request or can transport the DTP with the process chain
Thanks
BITHi,
This happens in few scenarios... i'm not sure in which case... this happens ,you can check in your system from DEV to QA there will be change.
@Deepak - Transformations and DTP technical names get change from DEV - QA for clarification on this you can cross check in you system itself.
@Bit_sun - yes you can assume that IP technical names will not change and the DTP n Transformations technical names will change not the descriptions. -
PSA Deletion Process in Process Chains Transport Question
BI Guru's
I am working on investigating a method of deleting PSA Requests this will be a stand alone process so no loads will be done in this process chain. My question I cannot use the Object Type of InfoPackage or DTP since these objects wont be in the Process Chain leaving me PSA Table option but since I will be developing this in Dev and transporting through environment into prod how will this be handled since PSA tables change from system to system? Does the system automatically translate it for me or will the value stay the same?Hi Alex,
System will automatically identifies the table in quality and then in Production system. You do not have to worry. I had same question and I tested it with transporting the Process chain from developement to quality. In quality system automatically identified the table corresponding to data target/Master data.
Regards,
Kams -
Process Chain Termination issue.
Hi,
I ran a process chain, its been terminated in the middle.
here is the message from log.
Process Execute InfoPackage , variant WBS Hierarchy has status Ended with
errors (instance REQU_AI8QGHV5KCC7KC1VSNGPRY9VF )
Process chain termination has been confirmed in meta chain
CE0BOS15OV4H1VDIEVZSFDEH8 , destination 'NONE '.
Looking forward to your solution.
Cheers
Senthilwhat is the messege it gives in the display messege screen. if the load is successful how it will get terminated.
chk the details tab of RSMO.
is the load is for ods? then in the details tab chk for subsequent processing is failed? chk the error messege, hope this may be due to invalid records. correct it in PSa and push to ods.
if any thing else pl revert us
Ramesh
Maybe you are looking for
-
ITunes 7 'previous track' glitch
Hello everyone. I've been experiencing a bit of an issue with iTunes with regards to the 'previous track' button. Oftentimes, if I press that button with a few seconds to go in the song, it'll still advance to the next track. Occasionally, when this
-
hi friends , In sapscript i want to draw the 8 horizontal lines and one vertical line like that only i want to display the records in tabular form. but when i put BOX WIDTH '18.5' CM HEIGHT 1 CM FRAME 10 TW INTENSITY 0 BOX WIDTH '18.5' CM HEIGHT '04.
-
After update all PDF files are added to iTunes
After updating to OS X 10.10 iTunes started to add all my PDF documents to its library. Is this happening to anyone else? Does anyone know how I can stop this from happening?
-
Error in Cover Flow mode on Ipod Touch
Since updating to version 2.2 my list of music tracks in List View Mode is correct. However when I hold my Touch in landscape mode and it changes to Cover Flow some of the tracks and artist names are incorrect. I have also found that some album cover
-
How to debug Adobe form attached to Web Dynpro for ABAP
Hi, My developer has created an adobe form and rendered inside a Web Dynpro page in the SAP Portal. It communicates with the Web Dynpro framework in the backend SAP system (Web Dynpro for ABAP). My question is, how would I know what infotype access t