Process chain - Two source system issue

Hi Experts,
I face problem when i transport a process chain from BW DEV to Quality.
I have two source systems in Quality ECI and EXS.EXS is a sandbox server(Source system) which we no longer use.
When i transport the process chain from DEV to QA, i get two DTP's automatically added to Process chain in quality for two source systems ECI and EXS whereas i do not want the data to be loaded from EXS client.
I checked the BW dev system, it has only one DTP in the process chain.
Now I want to elminate the other DTP in the process chain in quality.
Please suggest.
Regards,
Srini

I Dont think so a DTP for EXS system has got created automatically when you transport the PC to QA (which actually doesn't exist in DEV).
Please check you DEV system once again, there might a DTP from EXS system also.. other wise go the Release TR and then check the contents-->iif you find two DTP's there then it is there in the dev system..
Any ways if you want to delete the other DTP from the PC in QA.. you can Delete it directly from the PC itself.. Goto change mode of the PC and then select the DTP which you want to delete-->then right click and hten Click on Remove Process -->then activate the PC..
Note: You might have authorization to edit the PC in QA then only you will be able to do the changes..

Similar Messages

Trigger Process Chain from Source System into Target System

Hello...actually in source system BZD, we have a process chain, in the target system BWD, we have another process chain as well. We want to have a process of combining these two process chain together. When the process chain in source system is completed successfully, the system will sent out some sort of signal to start the process chain in BWD. I am not sure how this can be done, I try to use the function module "BP_EVENT_RAISE" in the BZD and when this module is called, it does not start the process chain in BWD after the process chain in BZD is completed. I just wondering am I using the correct method. If will be good if anyone here can help...thanks alot.

>
FluffyToffee wrote:
> Hello...actually in source system BZD, we have a process chain, in the target system BWD, we have another process chain as well. We want to have a process of combining these two process chain together. When the process chain in source system is completed successfully, the system will sent out some sort of signal to start the process chain in BWD. I am not sure how this can be done, I try to use the function module "BP_EVENT_RAISE" in the BZD and when this module is called, it does not start the process chain in BWD after the process chain in BZD is completed. I just wondering am I using the correct method. If will be good if anyone here can help...thanks alot.
Hi Fluffy,
Check RFC connection between the two sysems.
Try using remote process chain process type in the process chain. the fllowing link may help you.
http://help.sap.com/saphelp_nw70/helpdata/EN/86/6ff03b166c8d66e10000000a11402f/frameset.htm
Regards,
sunmit.

Transporting Process Chain - error Source system does not exist

Hi,
I tried to transport a local PC by itself (not including its main meta chain) since I have only done modifications in the local PC only. In the PC, there are PSA Processing, ODS Processing, ODS Activation, ABAP Program w/ variants and Infocube Rollup.
However, I got the following transport error: Source system does not exist
=======
Diagnosis
Source system is not known.
System Response
The imported data for DataSource was deleted again because the referenced source system does not exist and no mapping is defined in table RSLOGSYSMAP on an existing productive source system.
Procedure
Create the referenced source system in the Data Warehousing Workbench or define mapping to a known source system in table RSLOGSYSMAP.
You get to maintenance using Tools -> Conversion of the logical system names.
============
I have checked at the table RSLOGSYSMAP and all source system mappings are in order.
And the weird thing is, upon checking the PC itself in the transport-to box, I can activate it without any error.
FYI, we are currently upgrading to BI Accelerator. Am not sure if this could be one of the reasons.
Any inputs and tips are highly appreciated and will be rewarded with points accordingly.
Thanks

Hi,
This error is due to the fact that the
mapping table for the after import (RSLOGSYSMAP) is not correct maintained in PB7 system.
You need to maintain table RSLOGSYSMAP in each system
You can find the steps to do it in the attached note 127326:
o Maintain table 'RSLOGSYSMAP' in the target BW with view
   'V_RSLOGSYSMAP' and enter as 'original source system' the logical name of the source system in the source BW and as 'target source system' the logical name of the source system in the target BW.
   This maintenance is required since it allows the correct source system reference of the InfoSources to be transported.
This source system reference in turn is absolutely necessary to activate the transfer structure.
   Example:
   Source BW with source system AAA.
   Target BW with source system BBB where the source system AAA
   corresponds to the source system BBB.
   Entry in RSLOGSYSMAP in the target BW:
   Original source system: AAA, target source system: BBB.
   Give the DDIC user in the source BW in client 000 the
   authorization profile S_RS_ALL to create BW objects.
Cheers
Rajesh

Two source system in RSA1

Hello All,
I have the following scenario.
I have two source system ECDCLNT200 and ECDCLNT230 and one BI system BIDCLNT200. client 200 is used for configuration and client 230 is used for data loading and validation.now firstly i created source system ECDCLNT230 in RSA1 then it comes under SAP menu but when i try to create ECDCLNT200 in SAP Menu it comes automatically under BI menu. i deleted it and tried again but the same problem is there.
if i remain the same configuration means ECDCLNT200 under BI menu then will it create any problem in future ? or if i want to create ECDCLNT200 under SAP menu what is the otheroption ?
I tried both the way. first i rightclick on main node and selected create source system and second time i right click on SAP and select create source system but couldn't create it.
Please let me know the solution.
Regards,
Komik Shah

Thanks vincent,
i got the solution through SAP note.
I have assigned the points.
Thank you again
Regards,
Komik Shah

Creating two source systems

Hi all,
Can I create two source systems in BW (RSA1) for the same R/3 system? I like to have one for FI and CO, and the other for HR and PY.
Thanks a lot,
Regards
Vic

Hi Roberto,
I need them for the same client.
Regards
Vic

Multiple source system issue...

Hi,
We have two source system for BW Development and one source sytem for BWQ and BWP.
My query is: we have added two extra fields 0SOURCESYSTEM, 0FISCVARNT in the key fields to handle data from two different systems.
Do anyone have any more suggestion to handle such a scenario.
Suggestions will be highly appreciated.

Hi,
Incase if you are loading data from two sourcesytem ,you will have two data sources each representing one sourcesytem,then you can assign these to an infosurce with flexible update.
now you can craete two info packages for each source sytem and can load the data to the target
the steps may look something like this
replicate datasource1
replicate datasource2
create infosurce
assign datasource1 and datsource2 to infosurce
maintain transfer rules
under infosource
later create Ip for source1
create Ip for source2
crate target
create updaterules
map the infosoure to update rules
cheers,
Swapna.G

Transfer Rules for two Source System in Production

Hi All,
I have a question.
I have source system ECDCLNT230 (ECC Devlopment) which is connected to BIDCLNT200(BID Devlopment) I have two production source system ECPCLNT410 (ECP Pre Production Client) & ECPCLNT400 (ECP Production Client) which i want to connect with BIPCLNT400. when i transport my content from ECDCLNT230 to ECPCLNT410 and ECPCLNT400 , it works fine. i created 2 source system in BIPCLNT400 and replicated data source in to BIPCLNT400 so all data source has replicated.
Now when i transport the request from BIDCLNT200 to BIPCLNT400, i need two transfer rules, two transformation one for each source system. for that what kind of settings are required.
Thanks is advance.
Regards,
Komik Shah

Hi,
If I understand correctly, in your BW Production system, you want to connect / load data from your ECC Pre Production and Production system.
In this case, to automate the transport needed for changes of transfer rules for both source system, you will need to have two tranfer rules in your BW Dev. You can either create two source system in Dev pointing to the same ECC Dev system, or one to ECC Dev and the second to ECC QA. Use different name for this two source system.
In BW Production, you then then maintain the source system conversion of both source system.
Thanks.

Prod source system issue

Dear All,
I have an issue in production system.
We applied a patch in BI prod and r3 prod for data lineage...but after that all process chains failed when i checked in source system connection ...there was no connection..
Now i want to restore my r3 prod source system in BI system Please tell me how to do that.
regards
shweta

Hello,
First check in SM59 whether the connection for the source system exits. If it does not then contact the BASIS team for connection.
If the connection is fine, then you can right click on the source system in BI and choose restore option.
But beware restoring with set the timestamp for all the datasources for that source system.
It will take time as it will replicate and activate all the datasources.
Regards,
Shashank

How to activate Process Chain in Production System?

Dear all,
We transported the process chain from QA to Production. But in Production they are in hidden mode. Means If i select the process chain, it does not showing any thing. How to I can schedule, activate and how i can see it in change or display mode in production.
Please provide helpful solution ...
Thanks in advance

Hi Shashi,
This should not be a basis issue .
Any how you have to take care of prerequisites like If you use load distribution for your system environment, the server group (logon group) is reduced to one server before debugging commences or if any auth issue.
[Here is all about external debugging |http://help.sap.com/saphelp_erp60_sp/helpdata/en/af/0cb5403fd63426e10000000a1550b0/content.htm]
Regards,
Gagan Deep Kaushal

Bw extraction process starting after a process/job in source system

Hello gurus,
I want to start a extraction process (a chain process) in BW system after a background program (job background process) has finished in the source system (which is an R/3 system).
My solution sound like this: I make a RFC function in BW that start the event XX, and planning the process chain to start at event XX (all this in BW side).
In source system I call the RFC function when the desired background process has finish.
I look for another solution (more simple maybe) for my task, or for any another suggestion.
thanks

Hi,
Refer the note :135637
(1) Create an event in the BW system
Define a system event (for example SAP_BW_TRIGGER) with Transaction SM62.
(2) Create a function module in the BW system
Create a function module (for example Z_BW_EVENT_RAISE) with the help of Transaction SE37. For the source code refer to the attachment of this note.
(3) Use the below code in code of the triggered job in the R/3 System.Here BIMCLNT000 is the logical system name of the BI system. you need to cange it to yours.
parameters: rfcdest like rfcdisplay-rfcdest default 'BIMCLNT000'.
call function 'Z_BW_EVENT_RAISE'
destination rfcdest
exporting
eventid = 'SAP_BW_TRIGGER'.
Regards,
Anil Kumar Sharma .P

Error "Object 'DM' (APCO) of type 'Application' is not available in version 'A'" while transporting process chain to production system.

Hi Gurus,
Whenever I try to transport a process chain ZFI_0FIGL_C10 from dev. to qua. & prod. the error “Object 'DM' (APCO) of type 'Application' is not available in version 'A'” is displayed in the end of creating transport package.
The process chain was created to load data to 0figl_c10 and it works all right on all systems (dev. qua. prod.).
The process chain contains processes for:
- starting the process chain
- executing infopackage (for loading data to 0figl_o10),
- ACR (activate data in 0figl_o10)
- delete index 0figl_c10
- DTP loading data from 0figl_o14 to 0figl_c10
- executing infopackage 80FIGL_O10
- creating index in 0figl_c10
- building DB statistics
- rolling up aggregates in 0figl_c10
- deleting of requests from the changelog 0figl_o10
- deleting of requests from PSA (0fi_gl_10)
How to find what cause that error.
Regards,
Leszek

Hi,
A SAP consultant told me to ignore that error.
Indeed, after creating transport with some new process chains (again I was informed about that error "APCO ...") and transporting it to production everything works all right.
The problem is described in sap note: 883745.
Regards, Leszek

Do we need to create process chain explicitly nor system generates process

Hi all,
Do we need to create process chain explicity in bpc netweaver nor the system generates it internally when we run data managment packages
thanks
Pooja

When you install BPC, there is a set of delivered process chains which are installed as well. You create the data manager packages from the BPC Excel clicent based on these process chains. You can of create custom BPC process chains in NetWeaver and create packages from those as well(for example via a How-To guide). So to answer your question, no, you do not have to create the "standard" process chains, and they are not generated by the system either, they are delivered as part of the BPC installation.
Regards,
Rich Heilman

Source system issues post BW System Copy

Hi Team,
Post BW System Copy, we have observed that the RFC connection has changed.
However the Target Host port is maintained same as the required source system...
While checking the Connection, we are getting the following error messages:
@5C@     Port description contains errors: Incorrect destination MR0CLNT200     RSAR     669
@5C@     BI unknown in source system     RSAR     8
@5C@     BI IDoc type ZSMA002 is not the same as source system IDoc type     RSAR     371
@5C@     The following errors occurred in the source system:     RSAR     374
@5C@     EDI: Partner profile not available     E0     332
@5C@     Entry in inbound table not found     E0     414
@5C@     Entry in outbound table not found     E0     400
@5C@     Entry in outbound table not found     E0     400
@5D@     Destination MP0CLNT200 has incorrect Unicode setting; adjust it to destination     RSAR     673
Please advice.
Thanks & Regards
Sneha
Edited by: Sneha Santhanakrishnan on Mar 23, 2011 2:12 PM
Edited by: Sneha Santhanakrishnan on Mar 23, 2011 3:04 PM

Hi Arun,
Thanks..
Your solution worked for all the datasources except one wherin I am getting a error message while activating the Transformation as "System setting does not allow changes to be made to the object XXXXXXX"
Please note the Transformation is in the ACTIVE but NOT EXECUTABLE state.
Find below the details description on the issue.
Message no. TO128
Diagnosis
The system and namespace change option set for this SAP System does not allow any changes to be made to object RSFO 4L8RD1B5MKEQI3WSPE5S8MR2O.
System Response
Editing is terminated, the object can only be displayed.
Procedure
If you want to edit the object RSFO 4L8RD1B5MKEQI3WSPE5S8MR2O in this SAP System, have your system administator set the SAP System to "modifiable" for this object.
This can affect the modifiability of the namespace &1 or the namespaces that correspond to the pattern &1, as well as the global setting of the system change option.
The system change option is set using the Transport Organizer tools (Transaction SE03). Expand the Administration node and execute the program Set system change option. The options are described there.

New Source System Issue

Hi
We are trying to connect new Source System to BW. It is ECC 5.0.
When I try to activate the Source System, it generates the following error:
<b>EDI: Partner profile not available
Entry in inbound table not found
Entry in outbound table not found
Entry in outbound table not found</b>
I checked WE20, it looks good. This is very similar to the current R/3 System (4.6). I was able to REPLICATE the DATASOURCE with no issues.
Can you please let me know, how this could be resolved.
Regards,
GPK.

Hi Guru's
The OSS note mentioned was a good one. I did check that OSS to ensure we were on track. There was no loop hole i got in regards to this issue.
I cannot say why it worked for me but I could tell what I did.
1. Deleted the source system, I creted.
2. Created the Source System back again.
3. It worked, but the only difference I noted was that, the icon of the source system is like the BW and not like the r/3 icon. I don't know WHY??
Thank you all for your support and advices.
Regards,
GPK.

Creating the New Process Chains in BW System

Hi SDN,
What is the best practice of creating the New Process Chain?
1. Whether to create the Process Chain in BW Development first and trasferring it through transfer request
OR
2. Create directly the Process Chain in the BW Production and schedule it
Please provide the views.........
Kind regards,
Rajesh Giribuwa

hI rAJESH,
Ya,we must create any development in development system and then subsequesntly to test and then production system.
but my exp was differnt in one of my project .
i have developed the pc in dev first and then trasported to test and then prod,
it worked fine in dev and test but in prod it was not running ,due to some system resources.
so i did the change direclty in prod and then it worked .
but it was risk .
hope this is helpful
Jimmy
dont hesitate to move u r cursor towards the max point

Process chain - Two source system issue

Similar Messages

Maybe you are looking for