Process chain Upload of Master Data

I have to create process chains to load the Master data and text.
lets say i have Cost Center master data to be loaded through process chain.
And this CC has 3 Attributes like Org ,Profit Center..
So have i got to do the process chain in sucha way that
I have to load the Org, Profit Center master data and its text first and then set the process chain to load the Cost Center if the above are successful ???
Thanks a lot,
GG

GG,
The loading of master data (attributes) for Org, PC and any other attributes is recommended before loading the cost center data, but not required.
The only thing that could happen is the system has to do extra work in creating master data entries that don't yet exist, on smaller master data loads like cost center, it won't make much of a difference, but master data like 0MAT_PLANT, and not loading 0MATERIAL prior, could take longer.
Texts can be loaded at any time, texts don't slow down system performance and are not required for master data creation.
Hope this helps!
Cheers!
/smw

Similar Messages

Delta and Full process chain for same master data target.

Hi Friends,
Can I do full update and delta update through process chain for same master data target and from same source ?
Regards
shekar reddy

Hi Sriram,
why you want to load full and delta for same master data object?
you can achieve this but make sure that you select repair full option for full load IP.
you have this option in scheduler in menu bar
Regards,
Venkatesh

Error in Process Chain while loading Master data text?

Hello All
Having a Process chain and having 5 infopackages(Master data Attri & text)with FULL LOAD with an processing options as PSA and Infobject.In this one of the infopackage failed and the status is in red colour,and when I right clicked there is no repeat option?Now how to run this process?
Heard that v can restart the process in debug screen?can anyone let me know how to do this?
Many Thanks
balaji

Hi dear,
you don't find the repeat option because this is a full load...I think you can easily restart the entire PC (or loading directly the failed infopackage from RSA1), because full loads for master data don't cause any data duplication !
Hope it helps!
Bye,
Roberto

Failure of Process Chain while loading master data.

Hi Guys
We are using BI 7.0, we have a chain which loads the data to several master data objects having a Write Optimized DSO in between those.
The steps of the chain is like this when new/delta loads are started loadin first it deletes the all existing WO DSO requestes. starting it was running nice but, now it showing error as follow
"Process Complete Deletion of Data Target Contents, variant Delete Contents of WriteOptimized Text DSO has status Ended with errors (instance DELC_D2YPRHNFKWTJ27DGHR825IG9V)"
for your details pls. look below description what job loag shows.
24.03.2008 23:31:52 Job started
24.03.2008 23:31:52 Step 001 started (program RSPROCESS, variant &0000000025223, user ID ALEREMOTE)
24.03.2008 23:31:54 SQL: 24.03.2008 23:31:54 ALEREMOTE
24.03.2008 23:31:54 TRUNCATE TABLE "/BIC/AZCAGSO0100"
24.03.2008 23:31:57 SQL-END: 24.03.2008 23:31:57 00:00:03
24.03.2008 23:31:58 Status transition 8 / 8 to 9 / 9 completed successfully
24.03.2008 23:31:59 Request DTPR_D2YHDA9WBJZHMZR3RNDP84G27 deleted from PSA; RSREQICODS entry also deleted
24.03.2008 23:31:59 Request DTPR_D2YHDA9WBJZHMZR3RNDP84G27 not found in IC ZCAGSO01; RSREQICODS also deleted
24.03.2008 23:31:59 Request DTPR_D2YHDA9WBJZHMZR3RNDP84G27 deleted from PSA; RSREQICODS entry also deleted
24.03.2008 23:31:59 Overall status 'Deleted' (user ALEREMOTE)
24.03.2008 23:31:59 Status transition 8 / 8 to 9 / 9 completed successfully
24.03.2008 23:31:59 Request DTPR_D2YHASHF1RGT3PS7K15O1EC7J deleted from PSA; RSREQICODS entry also deleted
24.03.2008 23:32:00 Request DTPR_D2YHASHF1RGT3PS7K15O1EC7J not found in IC ZCAGSO01; RSREQICODS also deleted
24.03.2008 23:32:00 Request DTPR_D2YHASHF1RGT3PS7K15O1EC7J deleted from PSA; RSREQICODS entry also deleted
24.03.2008 23:32:00 Overall status 'Deleted' (user ALEREMOTE)
24.03.2008 23:32:00 Status transition 8 / 8 to 9 / 9 completed successfully
24.03.2008 23:32:00 Request DTPR_D2YHAST7Z9OI47JWNE6XYISEN deleted from PSA; RSREQICODS entry also deleted
24.03.2008 23:32:00 Request DTPR_D2YHAST7Z9OI47JWNE6XYISEN not found in IC ZCAGSO01; RSREQICODS also deleted
24.03.2008 23:32:00 Request DTPR_D2YHAST7Z9OI47JWNE6XYISEN deleted from PSA; RSREQICODS entry also deleted
24.03.2008 23:32:00 Overall status 'Deleted' (user ALEREMOTE)
24.03.2008 23:32:01 Status transition 8 / 8 to 9 / 9 completed successfully
24.03.2008 23:32:01 Request DTPR_D2YHASHF1QTQL3ZFXU5A0KG27 deleted from PSA; RSREQICODS entry also deleted
24.03.2008 23:32:01 Request DTPR_D2YHASHF1QTQL3ZFXU5A0KG27 not found in IC ZCAGSO01; RSREQICODS also deleted
24.03.2008 23:32:01 Request DTPR_D2YHASHF1QTQL3ZFXU5A0KG27 deleted from PSA; RSREQICODS entry also deleted
24.03.2008 23:32:01 Overall status 'Deleted' (user ALEREMOTE)
24.03.2008 23:32:01 Status transition 8 / 8 to 9 / 9 completed successfully
24.03.2008 23:32:02 Request DTPR_D2YHANE9BAUMXVEZORZKK4W6B deleted from PSA; RSREQICODS entry also deleted
24.03.2008 23:32:02 Request DTPR_D2YHANE9BAUMXVEZORZKK4W6B not found in IC ZCAGSO01; RSREQICODS also deleted
24.03.2008 23:32:02 Request DTPR_D2YHANE9BAUMXVEZORZKK4W6B deleted from PSA; RSREQICODS entry also deleted
24.03.2008 23:32:02 Overall status 'Deleted' (user ALEREMOTE)
24.03.2008 23:32:02 Status transition 8 / 8 to 9 / 9 completed successfully
24.03.2008 23:32:02 Request DTPR_D2YHALZE6E7KDH4I6DFWJBHER deleted from PSA; RSREQICODS entry also deleted
24.03.2008 23:32:02 Request DTPR_D2YHALZE6E7KDH4I6DFWJBHER not found in IC ZCAGSO01; RSREQICODS also deleted
24.03.2008 23:32:03 Request DTPR_D2YHALZE6E7KDH4I6DFWJBHER deleted from PSA; RSREQICODS entry also deleted
24.03.2008 23:32:03 Overall status 'Deleted' (user ALEREMOTE)
24.03.2008 23:32:03 Status transition 8 / 8 to 9 / 9 completed successfully
24.03.2008 23:32:03 Request DTPR_D2YHAKPLWART6KV46SP2B02JN deleted from PSA; RSREQICODS entry also deleted
24.03.2008 23:32:03 Request DTPR_D2YHAKPLWART6KV46SP2B02JN not found in IC ZCAGSO01; RSREQICODS also deleted
24.03.2008 23:32:03 Request DTPR_D2YHAKPLWART6KV46SP2B02JN deleted from PSA; RSREQICODS entry also deleted
24.03.2008 23:32:03 Overall status 'Deleted' (user ALEREMOTE)
24.03.2008 23:32:04 Status transition 8 / 8 to 9 / 9 completed successfully
24.03.2008 23:32:04 Request DTPR_D2YHAKMW13R2CKHMT25HKESIR deleted from PSA; RSREQICODS entry also deleted
24.03.2008 23:32:04 Request DTPR_D2YHAKMW13R2CKHMT25HKESIR not found in IC ZCAGSO01; RSREQICODS also deleted
24.03.2008 23:32:04 Request DTPR_D2YHAKMW13R2CKHMT25HKESIR deleted from PSA; RSREQICODS entry also deleted
24.03.2008 23:32:04 Overall status 'Deleted' (user ALEREMOTE)
24.03.2008 23:32:04 Status transition 8 / 8 to 9 / 9 completed successfully
24.03.2008 23:32:04 Request DTPR_D2YHAJ9TA32EPY74YY9P8ATIB deleted from PSA; RSREQICODS entry also deleted
24.03.2008 23:32:04 Request DTPR_D2YHAJ9TA32EPY74YY9P8ATIB not found in IC ZCAGSO01; RSREQICODS also deleted
24.03.2008 23:32:05 Request DTPR_D2YHAJ9TA32EPY74YY9P8ATIB deleted from PSA; RSREQICODS entry also deleted
24.03.2008 23:32:05 Overall status 'Deleted' (user ALEREMOTE)
24.03.2008 23:32:05 Status transition 8 / 8 to 9 / 9 completed successfully
24.03.2008 23:32:05 Request DTPR_D2YHAJ9IZ7XK8H1KF0JEH9S6B deleted from PSA; RSREQICODS entry also deleted
24.03.2008 23:32:05 Request DTPR_D2YHAJ9IZ7XK8H1KF0JEH9S6B not found in IC ZCAGSO01; RSREQICODS also deleted
24.03.2008 23:32:05 Request DTPR_D2YHAJ9IZ7XK8H1KF0JEH9S6B deleted from PSA; RSREQICODS entry also deleted
24.03.2008 23:32:05 Overall status 'Deleted' (user ALEREMOTE)
24.03.2008 23:32:06 Status transition 8 / 8 to 9 / 9 completed successfully
Hope i can get solutions...
Points are assigned for right ones..
thanks inadvance
peter

Hi Chetan, thanx for your reply. pls. find the exact error below.
1. Error while deleting content of InfoCube/DataStore object
ZDRTSO01
2. Drop Cube Failed In Data Target ZDRTSO01
I am not using ECC, its BI to BI load.
Thanks in advance..
Peter

Process Chain Failed for Master Data

Hi All,
Process Chain has failed for vendor attributes, when i checked the error no message has shown, and when i check the vendor attribute , there request in RED which is loaded on sunday(it got failed on sunday) again failed today.
I repeated the Process Chain again failed, and i deleted the request which in generated yesterday (sunday) and deleted request from PSA (delta) also (which is RED) trying to Load again It is saying that Last delta update was Incorrect There no new update is possible
It seems there is no load in (sunday) that is why it is giving that message.
Could you please let me know how this problem will be solved.
Thank you,
Teena

Hi,
You need to mark the failed request as "red". Then go to the infopackage and rerun. If it still fails, check the error message in the monitor. In the monitor, click on the failed load, go to the status tab and then click on the error message button. It will tell you the exact error.
Most probably, the error is datasource does not support mode R. (Repeat of last delta). In which case, you need to reinitialiize the datasource. Most master data datasources do not support repeat of last deltas. Hence if the delta's fail, then you need to do a reinitialization.
Hope this helps.
Regards.

Process chain for loading master data attributes

Dear Experts,
Can any one explain the steps needed to load master data into info object through process chain.
Thanks in advance
Santhosh
Please search the forum
Edited by: Pravender on Jun 8, 2010 3:06 PM

in bi7 this would be:
start
infopackage
dtp
attribute change run
M.

LSMW Upload vendor master data

I am uploading vendor master data via a batch input in LSMW (program RFBIKR00).
I uploaded all the vendors for 1 company code.
When I try to upload the vendors for another company code, in the step Create Batch Input Session I get the error: Trans. 1 XK01 : Acct already exists; general area not being processed, ... Data in table BLFA1 cannot be processed.
When I try to manually create a vendor for another company code via tcode XK01, I have no problems. But when I create an existing vendor manually for another company code I dont have to add the information which is contained in table lfa1.
Therefore I tried to upload the vendor, which has to be created for the company code, with a / in the data for table lfa1. But this doesnt work.
Has somebody a suggestion to solve this problem?
Thanks

In the similar thread you said:
"If the vendor exists in LFA1 but not LFB1, use XK02 with the structures for LFA1. Then use XK01 with the structures for LFB1."
It is not possible to use XK02 in order to create the vendor for another company code if the vendor already exists with a certain company code. You will get the error "Vendor xxx has not been created for company code yyy".
The problem is that LSMW requires a mapping onto structure LFA1, but when the vendor already exists for a certain company code, LSMW returns in the step "Create Batch Input Session" the error: "Trans. 1 XK01 : Acct already exists; general area not being processed, ... Data in table BLFA1 cannot be processed".

Upload HR master data - Infotype 0005 error!

Hi all,
I want to upload HR master data with FM HR_MAINTAIN_MASTERDATA. I pass the right values and several infotypes are processed correctly.
the only infotype which is giving me problems is infotype 0005.
Every field in this infotype is filled except P0005-UANSP (leave entitlement value).
I tried passing the fieldname as Q0005-UAN01 with value and also P0005-UAN01 with value, but neither work!
It is a table type on the screen that's why we have to use 01 at the end of fieldname. the other data on the line of the table is filled correctly.
Does anyone have any idea on how to solve this?
Thanks in advance.
Marcel

I found during debugging that formroutine CLEAR_P0005 is called in programm MP000500 which clears the fields ending on 01, 02, 03, 04, 05 and 06.
I don't want this clear to be done, so the only option i have is making a modification i guess to avoid this routine to be called in my specific situation.
Problem solved.

Outbond interface programme to upload customer master data.

Hi experts,
i need to develop an outbound interface programme to upload customer
master data,which will be received from sap and posted to web methods using
standard function mudule.can any one help me?

Hi,
Hi,
Primary you should have Message type, Idoc type and Function module or Report to process Outbound interface.
If your's is an Customized Process, then follow this.
1. Create Message type in we81.
2. Create segments in We31
3. Create Idoc Type in WE30.
4. Assign Message type to idoc type in WE82.
5.Create an Partner profile in WE20.
6.If you are creating an function Module create it in SE37.
7. Assign it to process code in WE41.
8. Charactersitics of FM in BD51.
9. Assign FM and IDoc And Message type in WE57.
ALE IDOC
Sending System(Outbound ALE Process)
Tcode SALE ? for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 ? Create Model View
Tcode BD82 ? Generate partner Profiles & Create Ports
Tcode BD64 ? Distribute the Model view
Message Type MATMAS
Tcode BD10 ? Send Material Data
Tcode WE05 ? Idoc List for watching any Errors
Receiving System(Inbound ALE )
Tcode SALE ? for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 ? Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 ? Idoc List for inbound status codes
ALE IDOC Steps
Sending System(Outbound ALE Process)
Tcode SALE ?3 for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 !V Create Model View
Tcode BD82 !V Generate partner Profiles & Create Ports
Tcode BD64 !V Distribute the Model view
This is Receiving system Settings
Receiving System(Inbound ALE )
Tcode SALE ?3 for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 !V Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 !V Idoc List for inbound status codes
Message Type MATMAS
Tcode BD10 !V Send Material Data
Tcode WE05 !V Idoc List for watching any Errors
1)a Goto Tcode SALE
Click on Sending & Receiving Systems-->Select Logical Systems
Here Define Logical Systems---> Click on Execute Button
go for new entries
1) System Name : ERP000
Description : Sending System
2) System Name : ERP800
Description : Receiving System
press Enter & Save
it will ask Request
if you want new request create new Request orpress continue for transfering the objects
B) goto Tcode SALE
Select Assign Client to Logical Systems-->Execute
000--> Double click on this
Give the following Information
Client : ERP 000
City :
Logical System
Currency
Client role
Save this Data
Step 2) For RFC Creation
Goto Tcode SM59-->Select R/3 Connects
Click on Create Button
RFC Destination Name should be same as partner's logical system name and case sensitive to create the ports automatically while generating the partner profiles
give the information for required fields
RFC Destination : ERP800
Connection type: 3
Description
Target Host : ERP000
System No:000
lan : EN
Client : 800
User : Login User Name
Password:
save this & Test it & RemortLogin
3)
Goto Tcode BD64 -- click on Change mode button
click on create moduleview
short text : xxxxxxxxxxxxxx
Technical Neme : MODEL_ALV
save this & Press ok
select your just created modelview Name :'MODEL_ALV'.
goto add message type
Model Name : MODEL_ALV
sender : ERP000
Receiver : ERP800
Message type :MATMAS
save & Press Enter
4) Goto Tcode BD82
Give Model View : MODEL_ALV
Partner system : ERP800
execute this by press F8 Button
it will gives you sending system port No :A000000015(Like)
5) Goto Tcode BD64
seelct the modelview
goto >edit>modelview-->distribute
press ok & Press enter
6)goto Tcode : BD10 for Material sending
Material : mat_001
Message Type : MATMAS
Logical System : ERP800
and Execute
7)goto Tcode : BD11 for Material Receiving
Material : mat_001
Message Type : MATMAS
and Execute --> 1 request idoc created for message type Matmas
press enter
Here Master Idoc set for Messge type MATMAS-->press Enter
1 Communication Idoc generated for Message Type
this is your IDOC
Change Pointers
I know how to change the description of a material using ALE Change Pointers.
I will give the following few steps
1) Tcode BD61---> check the change pointers activated check box
save and goback.
2) Tcode BD50---> check the MATMAS check box save and comeback.
3) Tcode BD51---> goto IDOC_INPUT_MATMAS01 select the checkbox save and comeback.
4) Tcode BD52---> give message type : matmas press ok button.
select all what ever you want and delete remaining fields.
save & come back.
5) 5) go to Tcode MM02 select one material and try to change the description and save it
it will effects the target systems material desciption will also changes
6) goto Tcode SE38 give program Name is : RBDMIDOC and Execute
give Message type : MATMAS and Executte
ALE/IDOC Status Codes/Messages
01 Error --> Idoc Added
30 Error --> Idoc ready for dispatch(ALE Service)
then goto SE38 --> Execute the Program RBDMIDOC
29 Error --> ALE Service Layer
then goto SE38 --> Execute the Program RSEOUT00
03 Error --> Data Passed to Port ok
then goto SE38 --> Execute the Program RBDMOIND
12 Error --> Dispatch ok
Inbound Status Codes
50 Error --> It will go for ALE Service Layer
56 Error --> Idoc with Errors added
51 Error --> Application Document not posted
65 Error --> Error in ALE Service Layer
for 51 or 56 Errors do the following steps
goto WE19 > give the IDOC Number and Execute>
Press on Inbound function Module
for 65 Error --> goto SE38 --> Execute the Program RBDAPP01 then your getting 51 Error
Regards

Error while uploading HR master data from inQuality server

Hi, Expert. While uploading of MAster data from Developement to Quality by BDC. When program starts for Tcode PA40, selecting Hiring Action, it is goining to the Action Screen. Here while taking the position from HR template, it gives error as Position is not in Table T428B. Payroll area on the date (Date of original hiring, of the person) it is taking DM as defalt in place of our created Area and terminating. When i am trying entering the data manually, it is giving same error for Position. I am not able to upload the data. Kindly help me by suggesting me the correct sequence and steps for uploading the data. Correct answer will be provided with STARSSSSSS **. Regds Punit.

Have all your configurations been transported to Quality?
Have you created the positions before initiating BDC for Hiring?
Check Feature ABKRS in Quality. Is this same as in Development?
Is your BDC running OK in Development?
Regards,

Error While Uploading GL Master Data in LSMW

Hello Experts,
I am running into error while uploading GL master data in LSMW, I created recording through FS00, then I mapped the fields, it all went good till 13th step, but last step got stuck(Run Batch Input Session), when I am running batch input session, system is showing this message "Function Code cannot be selected"
Your help would be highly appreciated.
Regards
Muhammad Yousuf Ali
SAP FI Consultant

Hi,
first can you pls check your Hierarchy mode setting in FS00 - before executing Batch input session -
Open FS00 - go to settings - and Do not display navigation tree select radio button and save it
then Now Run fresh LSMW - your issue will resolve
Mahesh

How to upload the master data from legacy to SAP

Hi Frends,
how to upload the master data from legacy system to SAP System once the configuration is over.how to carry forward the open items of vendors and customers while uploading.who will upload functional consultantsor ABAPER.
please clarify me
Regards
Sap Guru

Hi ,
use LSMW or BDC for uploading Master & transaction data.
This work is done by the Respective Functional team.
Chandra

Upload vendor master data from legacy system to internal table tcode xk01

through batch input program how to upload vendor master data from legacy system to internal table and then to SAP R/3 database(transaction XK01) by using recording method.

By learning the basics of BDC recording and the use of GUI_UPLOAD

LSMW Upload vendor master data problem

Hello,
I have to upload vendor master data with LSMW.
I'm using a batch input with the program RFBIKR00.
In the step "Create batch input session", I get the following error:
FB012 Session 1 : Special character for 'empty field' is /
FB007 Session 1 session name VENDOR was opened
FB112 Trans. 1 : No transaction code was transferred
FB016 ... Last header record ...
FB014 ... BLF00-STYPE 1
FB014 ... BLF00-TCODE /
FB014 ... BLF00-LIFNR DETES998
FB014 ... BLF00-BUKRS /
FB014 ... BLF00-EKORG /
FB014 ... BLF00-KTOKK 0001
FB013 ....Editing was terminated
Does anyone know how to solve this error?
Kind regards,
Frank

Hi ,
first up all u r not mentioning the tcode and other mandatory field values...just in the field mapping and conversion step...
click -->Extras -->Layout and select all fields
and give default values to field TCODE,and other fields also and also check whether mapping conversion with regard to source is correct or not...
If still any doubts i can clarify
Regards,
Sridhar Reddy
Message was edited by: sridhar reddy kondam
Message was edited by: sridhar reddy kondam

Error in process chain when running package (data manager)

Hello experts,
I try to run the following how to : "move date between applications using Data Manager ..."
Yon can find the pdf here : http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/b0480970-894f-2d10-f9a5-d4b1160be203
I'm looking after someone who used it successfully, on my side after implementing all steps and running the package I get the message "IMMEDIATE RUN: Request to run the package on the server was successful The package is now running"
When I look the log for the process chain, overall status of the process chain is yellow, and steps "modify dynamically" and "clear BPC Tables" are in error.
I can't get any usefull error messages.
If someone has an idea to have details about those errors, it will be appreciated.
Points will be awarded, thanks in advance.
Guillaume P.

Hello Experts,
I am also facing the same issue with PC failing at Modify_Dynamically step....
This process type is working fine when used in standard delivered process chain to load transaction data.
I tried using this variant in my cutsom chain, but it fails.
Please suggest.....
Thx....D

Process chain Upload of Master Data

Similar Messages

Maybe you are looking for