Process chains Activation
Hi,
I have transported few Process Chains(PC) from DEV -> PROD system.
I am not able to activate the same. All the PCs are in 'Not assigned' Node and are grey.
These PC were running normal in DEV.
Hi,
In general, PC will in inactive status ,eventhough transports are successfully imported.
you can try to activate manually.
Ur second question is ur not ablr to activate the PC?
In production becasue of security resons cross clint will be closed, we can not activate the PC if the cross clint is closed.
Check with the basis team to open cross clint and try to activate.
This just for your info...cross clint will be open via SCC4 transaction...this is secure transaction,use care fully.
Hope this helps you...Let us know if u requre any further info on this.
Best Regards,
Maruthi
Similar Messages
-
Why process chain activation is taking more time?
Hi BW Gurus,
I am going to activate the process chain, but it takes more time to activate the process chain . What may be the reasons ?
Regards,
RajuHi,
Process chain activation becomes slow due to the following reasons.
1)Large no of entities in RSPCCHAIN Table i.e, there is lot of process chains and very large process chains.
2)There is a missing index for the RSPCCHAIN Table.
Solution for this problem is we have to create an index for the following fields of the RSPCCHAIN table.
EVENT_GREEN
EVENT_PGREEN
EVENT_RED
EVENT_PRED
Still if you want further clarification on this , Refer the following sap notes.
906512---Activating process chain is very slow.
Related Notes: 872275, 872273& 872271 .
Regards,
Chendrasekhar -
Error in process chain activation
HI
I am learning on 3.0b,(on my pc) while using process chains, at the time of activating the process chain it is giving the following error "JOB BI_PROCESS_PSAPROCESS COULD NOT BE SCHEDULED, TERMINATION WITH RETURN CODE 8". Why am getting this error, is there anything wrong with my system or software or there any mistake in activating process chain" (what ever may be the process type i use, i am getting this error), plz help me.
thanksHi Ganesh,
The possible reason for that error is the User type of the background user. Please check out OSS note 511475 which talks about this problem and possible solution. I have used this earlier.
You can see this for info on how to make the change:
/message/685940#685940 [original link is broken]
Hope this helps... -
In Process Chain Activation of DSO is falling
Hello Techies,
In the Process chain the activation of DSo is falling but when I go and check the in the Manage DSo.
The Data is activated and available for reporting.
I dont know why in the Process chain the activation of DSO is falling ?
Regards,
QuaraishiHi
It depends on background job resource availability at the time of DSO Activaton. Also check the settings of the variant DSO Activation process for each DSO activation and make it separate with number of processes to 2 for activation.
Save the changes and activate it. Should work correctly now.
Thanks,
Sunil -
Process chain Activation Variant failed
Dear Gurus
In BI7 executed a process chain,in this ods activation is in 4 th step,turned in to red,i repeated and got executed.
Questions:
1.I checked in DSO all data got activated,only in process chain showed red status....how it is possible.
2.Eventhough 4th step turned in to red,below all (5,6,7...th steps) went through,how it happened,if some variants failed means next variant should not get executed?
3.When i did repeat it thrown ABAP debugging screen,i executed and went through well,ods activation variant became green.
When i was trying to see display message,it is empty no error message.
Root cause analysis i should give...pls how and where to do the analysis.....
Thanks and regards
T.GadhatharanHi,
1.I checked in DSO all data got activated,only in process chain showed red status....how it is possible.
In the ODS Activation Process, is there any other ODSs existed for activation?
2.Eventhough 4th step turned in to red,below all (5,6,7...th steps) went through,how it happened,if some variants failed means next variant should not get executed?
After the 4th Step, the further processes executed means, they might have put the settings as Success or failure of the predecessor process it can through the further 5th, 6th and 7th processes.
3.When i did repeat it thrown ABAP debugging screen,i executed and went through well,ods activation variant became green.
Check for short dumps ST22.
Hope it helps.
Veerendra. -
Admin cockpit - Business Content Process chain Activation failure
Hi,
we are working in Admin cockpit in sand box server.
we are activating the Business Content Process chain by taking all variants (begin with 0TCT) but we are getting the error message that Process AND has no predecessor.
Could you kindly suggest any thing to move further.
Thanks & Regards,
Shaliny. M
Edited by: shaliny mega on Mar 19, 2008 7:04 AMHi shaliny,
As mentioned in this post
https://www.sdn.sap.com/irj/sdn/forums.
Have u collected the Source system for which ur collecting the PC when u r activating Business conent?
Collect the source system when u r activating the PC. Give a try.
if it is useful assign points.
Regards,
Senthil -
When a new process is transported to qa or prod it has to be MANUALLY activated one time before the NEW: prefix is removed and the chain can be used by a meta chain.
Is there a configuration setting or some way to have the chain AUTOMATICALLY activated when it is transported to qa or prod?
Thanks,
Mike S.Hi Mike,
Welcome to SDN!!
You would need to do that to enable the schedule the process chain. I did notice an OSS Note or some document which stated the settings usinh which we can avoid this. I dont have access to my documents now. Would search and post.
Meanwhile all the posts discussed here talk about manual activation:
Process chain scheduling in QA
Process Chain Status is new after transport to QA
Also chek this blog:/people/sap.user72/blog/2005/09/05/sap-bw-and-business-content-datasources-in-pursuit-of-the-origins
Bye
Dinesh -
Process chain activation : 0 c hains were selected
Hi all
I have scheduled process chains in production.
Because one of the metachain is showing error while loading infopackage,in the production I have created a new infopackage and added it to the chian.Then activated the metachain.
But when i was trying to activate the main chain it showing message"0 chains were selected"
As a result when i scheduled the chain the old meta chain comes into picture instead of the modified chain.
ERROR MESSAGE
0 Chains Were Selected
Message no. RSPC031
Diagnosis
Specifying process chain ID 'ZN_0MATERIALATTR, type V2&', and variant '' has resulted in the selection of 0 process chains. The selection has been called without confirmation by the user. This means that the user was unable to make a selection.
System Response
The function is terminated.
Procedure
There is porbably an error in the program. Look for corresponding notes.
Please let me know how to solve this issue.
Thanks,
harika.
Edited by: harikag on Nov 9, 2011 6:33 AMHi harika,
Looks like the new meta chain was not in activated state....
Was the meta chain active and scheduled?
Is the meta chain running for the first time?
Also check the scheduling options how the Meta process chain is triggered?
if so , Make sure the event exist in the new meta chain. this may be causing the error.
if you had changed and created a new meta chain try to activate the new meta chain once and schedule it again and check.
Have you transported the PC or created in Production directly?
if transported from dev to prod check the log if there are any errors?
Also check if the below s note helps you
Note 1323015 - Correction: RSPC031 during transport of metachains
Regards
KP
Edited by: prashanthk on Nov 9, 2011 12:16 PM -
Process chain activation error in BI7...
hi gurus,
we are creating process chain for master data for
0PROMOTION_ATTR
0PROMOTION_TEXT
0SALESORG_ATTR
0SALESORG_TEXT
0CUSTOMER_ATTR
0CUSTOMER_TEXT
0VTYPE_TEXT
0DIVISION_TEXT
0SALES_GRP_TEXT
0DISTR_CHAN_TEXT
0CUST_GROUP_TEXT
0SALES_OFF_TEXT
0MATL_GROUP_TEXT.
we have created 1 start process and then execute info packages and DTP'S and used 'OR' conditions to connect to Attribute change run.
while i try to save my process chain its giving warning that 'Add at least one process to the chain before saving' and when i try to activate the chain its giving below error
Chain has no starter. Add a starter.
Message no. RSPC020
Diagnosis
The process chain has no start-process. A process chain always requires exactly one general starter.
System Response
The system is unable to activate the process chain.
Procedure
Add a general starter to the chain, and schedule it as the first process in the chain.
please suggest me how to rectify the problem.
regardsHi Harish,
Will you please goto process chain start varint and give the new varint for that and try to execute it once again..it will work for you...
If you could check once the check button all will be green and you can able to activate the process chain...I hope you are maintained the infoobjects in attr bute change run...problem might be with the start varint ionly...change the start varint and if you could not able to activate please let me know....
Regards
Srini -
Process Chain Activation Error
Hi Experts,
We are Transferring Data from Flat file to Infocube using PROCESS CHAIN..
Process chain Formation:
Start -
>> Infopackage----->>Delete Index--->>DTP--
>>Create Index
While Connecting START Variant with Infopackage i am getting following Error....
Access via 'NULL' object reference not possible.
A Short Dumb Created Contains Following Messages
Error in the ABAP Application Program
The current ABAP program "CL_RSPC_FRONTEND==============CP" had to be terminated because it has come across a statement that unfortunately cannot be executed.
Note :
1. we are also try to drag the start variant with Infopackage it is not connected .
2. Datasource and Infopackage are Delta Enabled.
Need Solution?
ThanksHi ,
We are allready give our file in Transaction Code : AL11 ==> DIR_HOME , But Same Error Coming ?
What is the Problem?
Thanks -
IP: Error in packaged planning sequence in process chain
Hi all,
We run a planning sequence from within a process chain. As the data transferred are quite a lot, we have packaged with setting "automatically" and with 30 packages to be built. Now the function returned (it ran already successfully before!) an error message stating:
Master cannot read return value from subprocess 2
and another error:
An error occurred with the maintenance of the query directory.
Do you have any idea what this could be?
Many thanks in advance,
AndreasHi Rakesh,
It's a BASIS problem. After transport during process chain activation, the background user tries to logon with the password and if it fails the chain will not be activated. The contents will be transported though. You can manually activate the chain. You can request the Basis guys to fix this.
- Ram -
Error while activating Process Chains
Hi all,
while activating the Process Chains, i am getting the following error "Job BI_PROCESS_PSAPROCESS could not be scheduled. Termination with returncode 8"
when i double click on the error msg, i got the following help msg: "
<i>Message no. RSPC065
Diagnosis
Program RSPROCESS is to be scheduled as job BI_PROCESS_PSAPROCESS under user ALEREMOTE.</i>
Can any one please show some way to solve this problem? please do this favor, i have been suffering with error for a long time.
Points will be given
Thanks
GaneshHi,
Just analyze the error message that you get while activating the PC, don't give any server name.If you are trying to run process chain using Flat file, it won't work,
and you should have source system R/3 or you have own datasources in BW system itself at that toime you can use PC to extract data. If your source system is Flat ile, it won't work. other wise you should place your flat file in application server, using AL11 tcode.
<b>OSS : 511475</b>
<b>Symptom</b>
You cannot schedule or perform any batch jobs with the BW or source system background user.
The error RSPC 065 occurs in the process chains:"Job could not be scheduled, termination with return code 8"
<b>Other terms</b>
RSPC065
<b>Reason and Prerequisites</b>
The user type is
"CPIC" up to 4.6B
"Communication" as of 4.6C
This user type may not execute or start any batch jobs, irrespective of the user authorizations.
<b>Solution</b>
Set the type of background user to
"Background" up to 4.6B
"System" as of 4.6C
This user type corresponds to the "Communication" type and may also perform background functions.
Through the Customizing, the BW user is automatically created by mistake as a communication user.Depending on your BW system release, you can solve this problem as follows:
BW 2.0B
Import Support Package 24 for 2.0B (BW2.0B patch24 or SAPKW20B24) into your BW system. The Support Package is available once note 456551 with the short text "SAPBWNews BW 2.0B Support Package 24", which describes this Support Package in more detail, has been released for customers.
BW 2.1C
Import Support Package 16 for 2.1C (BW2.1C patch16 or SAPKW21C16) into your BW system. The Support Package is available once note 456566 with the short text "SAPBWNews BW 2.1C Support Package 16" has been released for customers.
BW 3.0A
Import Support Package 8 for 3.0A (BW3.0A patch08 or SAPKW30A08) into your BW system. The Support Package is available once note 452632 with the short text "SAPBWNews BW 3.0A Support Package 08" has been released for customers.
<b></b> -
"Transfer structure is not yet active" in each variant of a process chain
I run a big process chain in test environment that I had never run before, but find almost every variant of the process chain show the red error, when I right click the red color variant, get the msg at the status bar that says "Transfer structure is not yet active". Is there a way that can do the mass activation of all master data attributes?
ThanksHi I have the same error message
When I intend running the program to Activate Transfer Structures I get the following error messages
@5C\QError@ Activation not possible: Transfer structure contains invalid field LANGU
@5C\QError@ Transfer structure 0MATERIAL_HIER_AB1 NOT activated successfully Activate manually
@5C\QError@ Activation not possible: Transfer structure contains invalid field NODENAME
@5C\QError@ Transfer structure 0MATERIAL_HIER_AB1 NOT activated successfully Activate manually
@5C\QError@ Activation not possible: Transfer structure contains invalid field LANGU
@5C\QError@ Transfer structure 0MATERIAL_HIER_AB1 NOT activated successfully Activate manually
@5C\QError@ Transfer structure 0MATERIAL_HIER_AB1 NOT activated successfully Activate manually
Please Advise on how to fix it . -
Error while activating data in process chain
Hi All,
Am getting following error msgs in process chain while activating the data store object variant
1.Cannot activate request 0000015195(REQU_78CEI406HFCMG85RWNSKW6HW4) of DataStore object RC2SCD10
2.Activation of M records from DataStore object RC2SCD10 terminated.
Any help how to resolve this error.
Regards
Sirisha.
Edited by: sirisha gupta on Dec 29, 2008 10:16 AMhello,
firstly see if the DSO and the transfomration, DTP are all active.
or
This can be due to the incorrect data record in ods
find that record in PSA correct that one and then try to run the load fro PSA to Data target.
or
Uncheck "SID's Generation upon activation" in DSO's settings.
or
you can also try by changing the "Parallel Processing" to "Serial Processing".
In the maintenance screen of DSO, select "Requests" tab:
Click on the "Activate" button at the bottom
Click on the "Activate in Parallel" button
Change the "Number of Processes" to "1" for Serial Processing
Save the setting
You should see the "Activate in Parallel" button with a cross icon now.
Check SAP Notes: 1118205 & 947481
refer:
DataStore object Activation
reg,
dhanya -
Process Chain - Follow on dependencies to DSO Activation
Hi, I have a Data Load Process where the start routine is dependent on DSO data that was just previously activated. For some reason it looks like the the time before the load and the time after the DSO activation are close by just seconds.
The Data Load Routine will drop records if the activated DSO data is not available and this seems like what I am witnessing. I thought there was a way to configure the chain or job to wait until the previous is completely done. or did that go away with 7.0...
Is there a way to make sure the loading process doesn't start until the previous DSO activation is completed and the data is available?
Thanks!Hi,
Interuppt concept :
If a process chain is only processed either in part or in its entirity if more than one start condition is filled, you use this process type to specify the additional conditions.
The chain is started when the condition of the start process is filled. However, the interrupt process will interupt the processing of the chain (as long as its status is "active") up until the point at which the condition of the interrupt process is filled. Should the start process condition be filled again before the interupt process condition is filled, the chain will start again and will only run up until the point of interruption. As soon as the interrupt process condition is filled, the system continues the last run of the chain only. The earlier runs remain unchanged.
The interrupt process schedules an additional background job that starts based on the relevant condition. Therefore the interrupt process is not really active during the interrupt phase; it does not use any resources during this time.
If the interrupt processes are filled before the start process condition, the chain starts as soon as the start condition is filled; the interrupt process no longer interupts the chain because its condition has already been filled. If the interrupt process condition is is filled again before the start condition of the chain is filled, this does not influence the chain. It is not stopped by the interrupt process..
so basically your interrupt will wait for an event like ex:..YABAP_YGTRFCEVENTRAISE_0035 ... so you can raise that event eother by some job or some program..bUt for you i think adding the waiting timw will be better option ..
hope i cleared you ..
Regards,
Shikha
Maybe you are looking for
-
Is buying in the US a good idea?
Hello, I currently live in the Netherlands, a small country next to Germany. In about 2 years I will go to college and will need a laptop. As I'm going to an industrial designers Academy I am going to need a laptop with quite some graphic capabilitie
-
Camera raw 6.5 adjustment brush issue
Hi all I've asked this question over at adobe Ok since I've installed the latest lion update 10.7.2 on my mac bookpro 2.3 intel core i5 memory 8 gig 1333 MHz DDR3 the exposure ajustment brush in Camera raw 6.5 is not working properly it dosen't alway
-
How to transfer stock from sample usage to unrestricted use
Dear sir how to transfer stock from sample usage to unrestricted use
-
Migrating Security from Native to External Authentication mode Servers
Hi All, I am migrating applications from V7, V9 (doesn't use Shared services) to V11 (Shared Services Enabled) Essbase server. I am able to migrate the application definition using the Application Migration Wizard. Take level-0 export from the source
-
2LIS_04_P_MATNR - second setup possible?
Hello, I have 2LIS_04_P_MATNR which is running perfect. Now I have to fill second DSO. Is it possible to fill this second DSO without new set-up from other DSO?