Process chains data load
Can any body help in data scheduling issue
I am able to load data manually the issue is i selected some of the datafields in InfoPackage data selection field and saved .
i put this Ip in the process chain.now the issue is i don't to load data immediately .. say i want to load the data after 3 hours for this i want to set the time .i did set up in the process chain start variant
but it is not working can anybody give me the steps in detail please....
Advance thanks
Kelvin sam
Hi Kelvin,
This should work using the start variant in the chain but of course the infopackage variant will only run if the process
before was successful (depending on your settings with the links joining the processes in the chain).
If you right click on the start variant, select 'maintain variant' , on the next screen make sure 'direct
scheduling' radio button is flagged unless you are using a meta chain as starter process.
Click on 'change selections' button , on the next screen select 'date/Time' option and here
you can set the start date and time. You then need to save this setting , select save
and on the next screen save again. You then need to activate and schedule the
chain again.
If this still does not work can you check if there are errors messages generated in
sm21/st22 or in the process chain log.
Regards,
Des.
Similar Messages
-
Process Chain Data load fail /send email is not woking
Hello Experts,
I have created a process chain for daily data load. And created a message variant to send an email if the data load fials, but it's not working. I am not sure what I am missing. Here are the step I did...
1. Right click on the Info Package in the process chain and select Create Message, select errors radio button and then created new variant.
2. In the variant screen, clicked on Maintain Recipient list and enter the Recipient names and mail options like express mail, send copy etc there and then saved.
Didn't select any under REcip type. Not sure whether it's needed.
I greatly appreciate your help.
Thanks
Ram
Message was edited by: Sri Vani
Solved by myself.
Thanks a lot.
Message was edited by: Sri Vanidid you configure the Basis process to send external emails and the automatic output process?
You could see this in tx SCOT
If there´s any record in tree (SAP SERVER)->INT->SMTP
Here.... if is not configured the automatic output you can manually send the emails.....
If this doesn´t works you need to talk to your basis support for the email basis configuration....
Regards -
Problem in Process chain data loading
Hi Experts,
We have a Process chain in which the lists of jobs are as follows.
1) BI_TRIGGER_PROCESS
2) BI_PROCESS_LOADING
3) BI_PROCESS_ODSACTIVAT
4) BI_PROCESS_DROPINDEX
5) BI_PROCESS_LOADING
6) BI_PROCESS_INDEX
7) BI_PROCESS_ABAP
These jobs trigger the PC and load the data to ODS, activate and delete the index for cube and load data to cube and create the index and then delete the file from the FTP.
The problem is that the Initial job (BI_TRIGGER_PROCESS) is being repeating multiple times because of which the loading is taking place for the same file repeatedly to ODS. one day it was happend repeatedly for 130 times. This is being happening on a randomly basis. We are unable to figure it out the where the problem is. Can anybody help in this regard?
Thanks.Hi Rama,
Following is my understanding of problem.
You have Following steps in process chain
1) BI_TRIGGER_PROCESS
2) BI_PROCESS_LOADING
3) BI_PROCESS_ODSACTIVAT
4) BI_PROCESS_DROPINDEX
5) BI_PROCESS_LOADING
6) BI_PROCESS_INDEX
7) BI_PROCESS_ABAP
Some times only first two steps repeat multiple times i.e
1) BI_TRIGGER_PROCESS
2) BI_PROCESS_LOADING
In such case you should see the log from process chain log view.
I believe you should take your process chain out of schedule and reschedule it.
Also check whether somebody has scheduled the inopackage.
Regards,
Ajinkya -
Infocube/DSO/Process Chain - data load statistics
Hi,
I'm trying to look for the total data records extracted per day and extraction time from ECC into a particular DSO or infocube.
Also the start and end times of the process chain which executes this infocube.
We are trying to do some performance analysis for the volume testing.So ,we can compare the data volume loaded vs the execution times.
I was able to look under the infocube/dso -> right click -> MANAGE -> transfered records/update records , request time,update time
For this, do I need to look at the full update details or the delta update details?
Also under a particular process chain,-> right click on First step ->Display messages to get the start time of the job
Right Click on last Step ->Display mseeages to get the job finished time.
I just wanted to get your thoughts on this, if this is the correct way to get the total records extracted and extraction times along with process chain times.
Thank you.Hi,
Based on the time char like 0calmonth, 0calday you will check the data.
check the jobs in SM37 at ECC and BI system.
select the specific jobs it will give clear picture. how much taking time form source to target.
you use the DB02 and STO5 and RSTT you can do performance analysis.
manage screen you will get either full or delta and which one source system and which type of data source.
Process chains have it will automate the PRD system
Thanks,
Phani. -
Regading Process chains data load monitoring
Hi All,
In my current project, I need to monitor process chains. I am kind of new to this environment as I had not done this before. My tasks are as follows.
1. Process chains are scheduled for a periodic job for every on hour starting at 6 a.m and ending at 12 a.m. After that I need to stop the chain and reschedule it for next day at 6 a.m. How do I do that?
2. Also if a delta process chain fails in one of the processes, I need to stop the chain before the next delta run starts filling the cube. How do I do that?
Also how to see why the process failed?
Please do respond.
Thanks in advance.You can stop your process chain in SM37 tcode. Just select the schedules processes, and here you can see your process chain, just select it, and cancel it for next release.
You can restart it, just by clicking on Execute button. Before executing PC, just cross check by right clicking process chain, and go to change selection option of maiantain variant of start variant. And see if process chain schedule option is starting at 6A.M. or not, and also check it is selected as period job of ` hour or not.
You can see log of process chain by right clicking it, and checking the message. It depends on what option for next process is you selected, like if your next variant connected to failed variant is selected as only if success, then you don;t need to stop ot. It will automatically not go to next process. or right click and you can select stop.
By right clicking on failed process you can see the logs in details. -
Process chains for loading data to target is not functioning
Hi SAPians,
Recently, we have upgraded the firmware on IBM P590 with the help of IBM on Saturday i.e. 06/12/2008 (The firmware of P5-590 was SF235_209. It was upgraded to SF240_XXX) and since then the process chains for loading data to targets are not functioning properly. We have stopped all the SAP services, database services & OS services from our end and services have been rebooted after firmware upgrade.
However, the problem with the process chains that load transaction data and hierarchies is solved but the chains that load master data are still not working as scheduled.
We tried to load the master data manually, by running DTP to load data to an object analysis code (attributes) the request remained YELLOW. After refreshing it several times, the request turned into RED. The error message was - PROCESSING TERMINATED (screenshot 1 attached).
To mitigate this we tried deleting the bad request and it prompted with the below message:
"Cannot lock request DTPR_4C37TCZGDUDX1PXL38LVD9CLJ of table ZANLYSIS for deletion (Message no. RSMPC178)" (screenshot 2 attached)
Please advise us how the bad request should be deleted?
Regards,
SoujanyaHi Sowjanya,
Follow the below procedure to make yellow request to RED:
Use SE37, to execute the function module RSBM_GUI_CHANGE_USTATE
From the next screen, for I_REQUID enter that request ID and execute.
From the next screen, select 'Status Erroneous' radiobutton and continue.
This Function Module, change the status of request from Green / Yellow to RED.
Once it is RED, you can manually delete that request...
Releasing LocK
Gott Transaction Code SM12 and release the lock.
Hope It helps you.
Regardss,
Nagaraju.V -
Process Chain which loads data to a cube
Hi All
Please help me create a process chain in BI 7.0. I have to load the data in to a cube and before that i need to delete the existing request in the Cube. I think i should use " Delete overlapping requests from Infocube". In the maintain variant for this process type what object types i need to add. Do i need to add both Execute infopackage and Data transfer process objects.
Regards
NagaHi Ravi
I am loading the data from PSA to Cube using DTP. Actually my data source is export datasource (8ZHYP- prefix 8). So accroding to your answer i should use DTP object type in the process type delete overlapping request. But when i create a variant for that process type it is getting Indexs > Create Index > Data Transfer Process > Request to delete data in the infocube.
I just want to delete the data in the infocube before i load the data. So can i delete all the remaining processes.
Regards
Naga -
Error in Process Chain while loading Master data text?
Hello All
Having a Process chain and having 5 infopackages(Master data Attri & text)with FULL LOAD with an processing options as PSA and Infobject.In this one of the infopackage failed and the status is in red colour,and when I right clicked there is no <b>repeat</b> option?Now <b>how to run this process</b>?
Heard that v can restart the process in debug screen?can anyone let me know how to do this?
Many Thanks
balajiHi dear,
you don't find the repeat option because this is a full load...I think you can easily restart the entire PC (or loading directly the failed infopackage from RSA1), because full loads for master data don't cause any data duplication !
Hope it helps!
Bye,
Roberto -
Failure of Process Chain while loading master data.
Hi Guys
We are using BI 7.0, we have a chain which loads the data to several master data objects having a Write Optimized DSO in between those.
The steps of the chain is like this when new/delta loads are started loadin first it deletes the all existing WO DSO requestes. starting it was running nice but, now it showing error as follow
"Process Complete Deletion of Data Target Contents, variant Delete Contents of WriteOptimized Text DSO has status Ended with errors (instance DELC_D2YPRHNFKWTJ27DGHR825IG9V)"
for your details pls. look below description what job loag shows.
24.03.2008 23:31:52 Job started
24.03.2008 23:31:52 Step 001 started (program RSPROCESS, variant &0000000025223, user ID ALEREMOTE)
24.03.2008 23:31:54 SQL: 24.03.2008 23:31:54 ALEREMOTE
24.03.2008 23:31:54 TRUNCATE TABLE "/BIC/AZCAGSO0100"
24.03.2008 23:31:57 SQL-END: 24.03.2008 23:31:57 00:00:03
24.03.2008 23:31:58 Status transition 8 / 8 to 9 / 9 completed successfully
24.03.2008 23:31:59 Request DTPR_D2YHDA9WBJZHMZR3RNDP84G27 deleted from PSA; RSREQICODS entry also deleted
24.03.2008 23:31:59 Request DTPR_D2YHDA9WBJZHMZR3RNDP84G27 not found in IC ZCAGSO01; RSREQICODS also deleted
24.03.2008 23:31:59 Request DTPR_D2YHDA9WBJZHMZR3RNDP84G27 deleted from PSA; RSREQICODS entry also deleted
24.03.2008 23:31:59 Overall status 'Deleted' (user ALEREMOTE)
24.03.2008 23:31:59 Status transition 8 / 8 to 9 / 9 completed successfully
24.03.2008 23:31:59 Request DTPR_D2YHASHF1RGT3PS7K15O1EC7J deleted from PSA; RSREQICODS entry also deleted
24.03.2008 23:32:00 Request DTPR_D2YHASHF1RGT3PS7K15O1EC7J not found in IC ZCAGSO01; RSREQICODS also deleted
24.03.2008 23:32:00 Request DTPR_D2YHASHF1RGT3PS7K15O1EC7J deleted from PSA; RSREQICODS entry also deleted
24.03.2008 23:32:00 Overall status 'Deleted' (user ALEREMOTE)
24.03.2008 23:32:00 Status transition 8 / 8 to 9 / 9 completed successfully
24.03.2008 23:32:00 Request DTPR_D2YHAST7Z9OI47JWNE6XYISEN deleted from PSA; RSREQICODS entry also deleted
24.03.2008 23:32:00 Request DTPR_D2YHAST7Z9OI47JWNE6XYISEN not found in IC ZCAGSO01; RSREQICODS also deleted
24.03.2008 23:32:00 Request DTPR_D2YHAST7Z9OI47JWNE6XYISEN deleted from PSA; RSREQICODS entry also deleted
24.03.2008 23:32:00 Overall status 'Deleted' (user ALEREMOTE)
24.03.2008 23:32:01 Status transition 8 / 8 to 9 / 9 completed successfully
24.03.2008 23:32:01 Request DTPR_D2YHASHF1QTQL3ZFXU5A0KG27 deleted from PSA; RSREQICODS entry also deleted
24.03.2008 23:32:01 Request DTPR_D2YHASHF1QTQL3ZFXU5A0KG27 not found in IC ZCAGSO01; RSREQICODS also deleted
24.03.2008 23:32:01 Request DTPR_D2YHASHF1QTQL3ZFXU5A0KG27 deleted from PSA; RSREQICODS entry also deleted
24.03.2008 23:32:01 Overall status 'Deleted' (user ALEREMOTE)
24.03.2008 23:32:01 Status transition 8 / 8 to 9 / 9 completed successfully
24.03.2008 23:32:02 Request DTPR_D2YHANE9BAUMXVEZORZKK4W6B deleted from PSA; RSREQICODS entry also deleted
24.03.2008 23:32:02 Request DTPR_D2YHANE9BAUMXVEZORZKK4W6B not found in IC ZCAGSO01; RSREQICODS also deleted
24.03.2008 23:32:02 Request DTPR_D2YHANE9BAUMXVEZORZKK4W6B deleted from PSA; RSREQICODS entry also deleted
24.03.2008 23:32:02 Overall status 'Deleted' (user ALEREMOTE)
24.03.2008 23:32:02 Status transition 8 / 8 to 9 / 9 completed successfully
24.03.2008 23:32:02 Request DTPR_D2YHALZE6E7KDH4I6DFWJBHER deleted from PSA; RSREQICODS entry also deleted
24.03.2008 23:32:02 Request DTPR_D2YHALZE6E7KDH4I6DFWJBHER not found in IC ZCAGSO01; RSREQICODS also deleted
24.03.2008 23:32:03 Request DTPR_D2YHALZE6E7KDH4I6DFWJBHER deleted from PSA; RSREQICODS entry also deleted
24.03.2008 23:32:03 Overall status 'Deleted' (user ALEREMOTE)
24.03.2008 23:32:03 Status transition 8 / 8 to 9 / 9 completed successfully
24.03.2008 23:32:03 Request DTPR_D2YHAKPLWART6KV46SP2B02JN deleted from PSA; RSREQICODS entry also deleted
24.03.2008 23:32:03 Request DTPR_D2YHAKPLWART6KV46SP2B02JN not found in IC ZCAGSO01; RSREQICODS also deleted
24.03.2008 23:32:03 Request DTPR_D2YHAKPLWART6KV46SP2B02JN deleted from PSA; RSREQICODS entry also deleted
24.03.2008 23:32:03 Overall status 'Deleted' (user ALEREMOTE)
24.03.2008 23:32:04 Status transition 8 / 8 to 9 / 9 completed successfully
24.03.2008 23:32:04 Request DTPR_D2YHAKMW13R2CKHMT25HKESIR deleted from PSA; RSREQICODS entry also deleted
24.03.2008 23:32:04 Request DTPR_D2YHAKMW13R2CKHMT25HKESIR not found in IC ZCAGSO01; RSREQICODS also deleted
24.03.2008 23:32:04 Request DTPR_D2YHAKMW13R2CKHMT25HKESIR deleted from PSA; RSREQICODS entry also deleted
24.03.2008 23:32:04 Overall status 'Deleted' (user ALEREMOTE)
24.03.2008 23:32:04 Status transition 8 / 8 to 9 / 9 completed successfully
24.03.2008 23:32:04 Request DTPR_D2YHAJ9TA32EPY74YY9P8ATIB deleted from PSA; RSREQICODS entry also deleted
24.03.2008 23:32:04 Request DTPR_D2YHAJ9TA32EPY74YY9P8ATIB not found in IC ZCAGSO01; RSREQICODS also deleted
24.03.2008 23:32:05 Request DTPR_D2YHAJ9TA32EPY74YY9P8ATIB deleted from PSA; RSREQICODS entry also deleted
24.03.2008 23:32:05 Overall status 'Deleted' (user ALEREMOTE)
24.03.2008 23:32:05 Status transition 8 / 8 to 9 / 9 completed successfully
24.03.2008 23:32:05 Request DTPR_D2YHAJ9IZ7XK8H1KF0JEH9S6B deleted from PSA; RSREQICODS entry also deleted
24.03.2008 23:32:05 Request DTPR_D2YHAJ9IZ7XK8H1KF0JEH9S6B not found in IC ZCAGSO01; RSREQICODS also deleted
24.03.2008 23:32:05 Request DTPR_D2YHAJ9IZ7XK8H1KF0JEH9S6B deleted from PSA; RSREQICODS entry also deleted
24.03.2008 23:32:05 Overall status 'Deleted' (user ALEREMOTE)
24.03.2008 23:32:06 Status transition 8 / 8 to 9 / 9 completed successfully
Hope i can get solutions...
Points are assigned for right ones..
thanks inadvance
peterHi Chetan, thanx for your reply. pls. find the exact error below.
1. Error while deleting content of InfoCube/DataStore object
ZDRTSO01
2. Drop Cube Failed In Data Target ZDRTSO01
I am not using ECC, its BI to BI load.
Thanks in advance..
Peter -
Creation of Decision in Process Chain to load data to a SPO
Hi,
I have a question regarding adding a Decision type to my Process chain.
I want to load data to a SPO that contains 12 InfoCubes (Jan - Dec) from a DSO, but I do not want to start all 12 DTP's.
Want I am looking for is a way to only start the DTP's that load to the InfoCubes that contain current month, last month and all other data should be loaded to a Infocube (nr 13) that is not a part of the SPO so I would only have 3 DTP's running at the same time and not 13.
E.g. A delta load to the DSO contains 3 records; 1 for 2014.09, 1 for 2014.08 and 1 for 05.2013 triggers the DTP to the January InfoCube, the DTP to the August InfoCube and the DTP to the 13 Infocube.
Is this possible by using a Decision and if so how?
Kind Regards
SteffenI haven't worked with SPOs yet, but I do work frequently with decisions, so here's my 5 cents...
In your case you wish to have your decision based on the data contained in "a delta load to the DSO". I'm assuming you're talking InfoPackage here, because you wish to execute the DTP's afterwards.
So basically you need to determine which "months" are in your incoming data packages. The only way I see that possible is via start/end routine. In your example, you would look the data package and find 3 records each with a different month, being 08.2014, 09.2014 & 05.2013. You could then "convert" these to just numbers ranging from 1 to 13. That makes it relatively "easy" to link the right DTP to the right "number".
Now, how to pass that info (those numbers) back to the "decision" process? By default you base your formula on a "system" field (see basic how to link below). I don't see how this would work in your case. You'll need to somehow export your "numbers" (most likely an internal table or a "range") to memory (or fill it in a [z-]table) and then read it back in with custom code. I haven't done that yet (at least not in the context of decision steps), but I would recommend to have a look at the "experienced" way of working document below. It won't be easy, but I think it could work.
Cheers,
Raf
The official documentation can be found here.
For a "basic" how to on decision step, click here.
For a more "experienced" way of working, click here. -
Process chain for loading master data attributes
Dear Experts,
Can any one explain the steps needed to load master data into info object through process chain.
Thanks in advance
Santhosh
Please search the forum
Edited by: Pravender on Jun 8, 2010 3:06 PMin bi7 this would be:
start
infopackage
dtp
attribute change run
M. -
Process chain while loading data into DataStoreObject
Hai
Im trying to load the data in DataStoreObject by using the process chain . I build the process chain like below
Start Process -> InfoPackage -> DataTransferProcess -> Activate DataStoreobject Data .
When i try to schedule the proces chain then job is going to be cancelled.
Then i looked in St22 . There i got the error says that <b>MESSAGE_TYPE_X</b> .
how can i solve this error . Please let me know
i ll assing the points
kumarHi,
try to activate again the ODS, also try to activate manually by executing the following report from SE38:
RS_TRANSTRU_ACTIVATE_ALL
Insert just the infosource of the ODS and execute it. After this, replicate the datasource and try again to execute the chain.,
Rgs
Antonino -
Is a save step neccessary in a Process Chain when loading hierarchies with an ABAP program?
We are loading hierarchies using the ABAP routine found here in the SDN.
We have come accross the issue where the process chain loads successfully, but does not update the hierarchy (this problem is documented in the SDN). It is not a consistent issue, but it causes problems when it does occur.
OSS note 652856 points out that a SAVE HIERARCHY step is needed after the load and before the Change Attribute run.
We have added the step to the process chain, which leads me to the question.
In using the ABAP program to load hierarchies is the addition of the Save Hierarchy step necessary?
Will that resolve the issue with hierarchies not updating?Hi Bill,
Yes, SAVE HIERARCHY step is required when hierarchies are loaded as part of process chain. This step ensures that the hierarchy data loaded to BW has been saved. Then we have to run ACR so that these hierarchies will be activated and adjusted.
This is the reason why even the hierarchy data loaded using infopackage needs this step. This step is not required if the Infopackage is triggered manually.
This link will help you in better understanding
http://help.sap.com/saphelp_nw04/helpdata/en/3d/320e3d89195c59e10000000a114084/content.htm
Regards
Chandu -
Generic Process-Chain to load many individual files - How?
Hello All,
There is a requirement to extract 5 csv files to a single ODS every week.
The files are individualy named and can appear all at the same time or spread out over 1 week.
Current loading practice is to employ 5 process-chains, one for each file. The Process-Chains are very similar except that each calls a different InfoPackage which points to a specific file.
I would like to be able to perform the load with only 1 process-chain.
Initialy I though I could achieve this by running a script that renames the source files to genericname.csv for example, and then creating an InfoPackage that uses a logical filename. However, for audit purposes, the source file names must remain unchanged.
So, does anyone have any suggestions how to achieve the objective preferably without using OS-level scripting?
Many thanks,Hi,
There is no simple way to achieve this. You can create a master process chain that has the 5 parallel file CSV load including the DTPs and upstream data loads. You can specify the next steps start irrespective of error (versus only if successful which is default ) inside the process chain. Upon successful data load, delete the CSV file so anytime the PC is run again, its not available. You can create an OS command prompt in side the PC at the end to achieve it.
So only the file that needs be extracted is available, eg: if csv1 needs be loaded to DSO1, the csv2-csv5 that load to (DSO2-5 or can be the same DSO) will not be available. So the process step1 will be successful, while the remaining will error, however given that the PC will complete since the next steps aren't dependent on success/failure of each extract.
Alternately
If you have external job scheduling agent like Maestro, is to schedule the individual PC (5 pcs as they exist today, each run by the Maestro scheduler) load from there.
Alternately, if the data is getting loaded from a flat file generated from R/3 or other SAP system, you can trigger the event from RFC which will start the respective process chain.
Hope it helps.
Samir -
How to automate the data load process using data load file & task Scheduler
Hi,
I am doing Automated Process to load the data in Hyperion Planning application with the help of data_Load.bat file & Task Scheduler.
I have created Data_Load.bat file but rest of the process i am unable complete.
So could you help me , how to automate the data load process using Data_load.bat file & task Scheduler or what are the rest of the file is require to achieve this.
ThanksTo follow up on your question are you using the maxl scripts for the dataload?
If so I have seen and issue within the batch (ex: load_data.bat) that if you do not have the full maxl script path with a batch when running it through event task scheduler the task will work but the log and/ or error file will not be created. Meaning the batch claims it ran from the task scheduler although it didn't do what you needed it to.
If you are using maxl use this as the batch
"essmsh C:\data\DataLoad.mxl" Or you can also use the full path for the maxl either way works. The only reason I would think that the maxl may then not work is if you do not have the batch updated to call on all the maxl PATH changes or if you need to update your environment variables to correct the essmsh command to work in a command prompt.
Maybe you are looking for
-
Can't create a new project in Logic pro . Goes straight to a midi file. Do I shut something down before trying to create a new project?
-
Strange icon that won't go away
an icon I don't recagnize has appeared at the top of my screen Its 1xnext to a phone. The phone icon on the screen also has a red atersik on its top left. I have completely cleared my call list and it won't go away. Anybody recognize this?
-
Now I am really confused, and this may be a really silly question. When I first started using iMovie a couple of weeks ago, I guess it was the HD version (5.0.2). I imported some 8 mm video tape yesterday--apparantly into iMovie (version 3.0). What i
-
How do I get rid of Terminal,It is preventing access to pictures
I have an iMac 27in 3.2 ghz 16GB memory running Yosemite 10-10-2.When I try to open "pictures" I get a small window headed "Terminal"and this prevents "pictures" opening,this only occurs on pictures .How do I get rid of Terminal ?
-
Page cannot be found error while connecting application in Workspace
A single user is getting Page cannot be found error when he is trying to connect to application through workspace. It is working fine for everyone else. I checked the network and is fine. Any ideas of what could be the reason? HFM version is 9.3.1.1