Process chains-Error occurred in the data selection-DBIF_RSQL_TABLE_UNKNOWN

Hi All,
The problem occurred in PC which was running smooth until now 
Now I am getting message:
in BI : Error occurred in the data selection
When I went in R/3 it shows DBIF_RSQL_TABLE_UNKNOWN
Probably the only way to eliminate the error is to correct the program.
Please check the entries in the system log (Transaction SM21).
Internal call code.........: "[RSQL/READ/PA0009 ]"
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
DBIF_RSQL_TABLE_UNKN
SAPLXRSA" or "ZXRSAU
EXIT_SAPLRSAP_002"
Can anyone explain..

Hi ,
Check note 950317.
also check the blow forum having same kind of discussion :
Runtime Errors DBIF_RSQL_TABLE_UNKNOWN
Short dump error DBIF_RSQL_TABLE_UNKNOWN
DBIF_RSQL_TABLE_UNKNOWN
thanks,
Deepak

Similar Messages

  • Error occurred in the data selection,If i do Repeat, then it is working fin

    Hi Freinds,
    Here is the error message,
    Error message from the source system
    Diagnosis
    An error occurred in the source system.
    System Response
    Caller 09 contains an error message.
    Further analysis:
    The error occurred in Extractor .
    Refer to the error message.
    Procedure
    How you remove the error depends on the error message.
    Note
    If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
    Details Tab:
    Extraction (messages): Errors occurred
    Error occurred in the data selection ....
    If i do Repeat Delta, then it is working fine.
    As it is a daily load, manually repeating the load from the past 10 days.
    Have tried using program RS_TRANSTRU_ACTIVATE_ALL.
    Any inputs pls.....

    Hi Friends,
    Thanks for your valuable inputs, Problem is solved.
    The Reason is that, there is a time difference in the r/3 system and bi system.
    The tolerable time differene shud be only 60 seconds.
    Basis guys  took down time at the OS level and hav made the timers sync.....
    The problem is on the source system GNP time differences
    persists, which can cause the problem with delta upload .
    Universal Time Coordinated UTC....: 1291187626
    Date and time of database.........: 01.12.2010 12:46:59
    Date and Time of R/3-Kernel.......: 01.12.2010 12:43:46
    Date and Time of ABAP-Processor...: 01.12.2010 12:46:58
    ABAP Time zone Setup ..............: 19800
    Date and Time / local time ........: 01.12.2010 12:43:46
    This leads to an exception of the delta processing, because this
    tolerates a deviation of 60 seconds only (When the repeat is processed,
    the "local time" in the ABAP is higher than the qrfc counter at the time when the delta was processed -> So a repeat works fine).
    Please synchronize the timers like described in attached note 101726 and 741734 to eliminate the time difference .
    With Regards
    Badri Thiriveedhi.

  • Error occured in the data selection while extract data from Source system

    Hello Friends
    i am facing Problem while extracting data to Biw System from SAP R/3 system
    The error mesage is 'Error occured in the data selection '
    i.e. Monitoring - Details tab - Extraction - With error

    Hi
    The delta wil take the Last init selection for loading data in to the BW...
    Did u check the IP at the Update tab is it the correct delta only.. or its a full..
    better to go to the RSA3 and check the extractor in the Delta mode .. if u give ur delta mode it automatically takes the selction options.. so please try in RSA3..
    regards
    CK
    PS: CHECK THE INIT SELECTIONS TOO  or do an init with outdatatransfer and perform the delta...
    Message was edited by:
            BW Star

  • Error message :"Error occurred in the data selection"

    Hi All ,
    When I am exracting a Delta from source I am getting this error mesage Error occurred in the data selection" can any one let me know how to slove  this,
    Thanks in Advance.
    rao

    Praveen,
    In SM 37
    In JobName i have given - *REQU_4683BBF4HXG4XW4ASQOSP6PJG
    where REQU_4683BBF4HXG4XW4ASQOSP6PJG is Request no
    User Name is -- *
    then I had check all these
    sched, Released, ready, active, Finished, cancelled
    then executed
    then i received the message no jobs are matches the selection criteria
    thanks
    prasanna

  • "Error occurred in the data selection" on init delta load ODS- InfoCube

    Hi, gurus and experts!
    I'm trying to do Init delta load from 0FIAR_O03 ODS into 0FIAR_C03 InfoCube in PRD env. by InfoPackage "Initialize with delta transfer (with data transfer)". Immediately after the load was started I got error
    "Error occurred in the data selection"
    with details
    "Job terminated in source system --> Request set to red".
    Where are no any short dumps. There are 1 activated init load in ODS - nearly 6 500 000 records.
    Any ideas about error? And the way I can load data?

    Hi Gediminas Berzanskis,
    I faced the similar error when I tried to load data from an ODS which contained huge amount of data to a Cube. Even in your case the volume of data is more (around 6.5 million records). The error could be due to the table space issue, please contact your Basis team to check if enough table space exist for both the data targets. 
    Meanwhile you may also check the RFC connection of the Myself source system.
    You can replicate the DSO datasource once and then reactivate the transfer rules using the program RS_TRANSTRU_ACTIVATE_ALL.
    Try load with a small amount of data with a Full load option and then with a delta option..
    Hope this Helps,
    Prajeevan (XLNC)

  • Error occurred in the data selection

    Hi Expert,
    I met issue when full loading data from R3 via customized datasource.
    the error message in request monitor is:
    Error message from the source system
    Diagnosis
    An error occurred in the source system.
    System Response
    Caller 09 contains an error message.
    Further analysis:
    The error occurred in Extractor .
    Refer to the error message.
    I checked in RSA3, the data extraction is successful, but in BW, when execute the infopackage with or without data selection, both failed due to the same error.
    I also checked the background job in SM37 in source system, the background BI* completed successfully, and the IDoc in both BW and source system processed successfully.
    I also tried to replicate datasource and activate is using RSDS_DATASOURCE_ACTIVATE_ALL, delete infopackage and recreate it. but seems all this didn't work.
    Could u pls tell me how to solve this issue? Thanks.
    Eileen

    Hello Eileen zhang,
    I have exactly the same error as you,  do you still remember how did you solved this problem?
    Regards,
    Thanks,
    Maria João
    Error message:
    "Error message from the source system
    Diagnosis
    An error occurred in the source system.
    System Response
    Caller 09 contains an error message.
    Further analysis:
    The error occurred in Extractor .
    Refer to the error message.
    Procedure
    How you remove the error depends on the error message.
    Note
    If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request."

  • Error occured in the data selection...urgent

    Hi,
    The master data(full update) is being pulled from R/3 to BW..while pulling it has thrown the error  as below.
    Error message from the source system
    Diagnosis
    An error occurred in the source system.
    System response
    Caller 09 contains an error message.
    Further analysis:
    The error occurred in Service API .
    Refer to the error message.
    Procedure
    How you remove the error depends on the error message.
    Note
    If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the
    when i checked in the error message it is showing as below
    Incomplete control parameter for commmunication with the BW system
    Errors in source system
    The detailed error message is as below..................
    Diagnosis                                                                               
    The control parameters for communication with the BW server are not  
        complete. A BW PlugIn upgrade could be the cause of the problem.                                                                               
    System response                                                                               
    Procedure                                                                               
    Depending on the Release of the BW server, proceed as follows:       
        BW Server Release 1.2B: Source system: Update InfoSource metadata    
        BW Server Release >= 2.0A: Source system: Activate         
    I have spoken with basis they told that they have done Kernel updation for BW..please help me in resolving this ..
    I have reran the infopackage still it is showin the same error..its very urgent
    thanks in advance..points will be assigned..
    regards,
    Manjula

    Hi Manjula,
    May be that this the Partner profile settings problem....
    Please check your partner profile settings in source system...
    Login the sources system > goto Tcode:WE20 select the BW system>
    check the all the settings one by one...
    Thanks
    Regards
    Sathis
    If it is useful assign the points...

  • "Error Occurred in the Data Selection" while excuting InfoPackage for DataSource(ORT_PA_TRAN_CONTROL)

    Hi,
    Can anyone help me out with the data selection error in InfoPackage, while I was trying to extract the DataSource(0RT_PA_TRAN_CONTRL) to BW./
    I've tried with "Init With Data Transfer" and without the use of Conversion Routines.
    Thanks,
    Taehoon.

    Hi,
    Why your using conversion routine at info pack level?
    Actually conversion routine already defined for info object 0MATERIAL, general tab.
    at info pack level, remove conversion routine MATN1 and don't give any selections.
    First try to run data source at source system RSA3. if it works then later you can trigger at info pack level without any selections.
    Thanks

  • Error occured in the data selection ...

    Hi experts,
    I have included a delta info package into a process chain.
    But when i checked the process chain, it was showing an error
    in the data store activation step as follows:
    ============================================
    Diagnosis
    DataSource 8YRTODSON does not have the same status as the source system in the Business Information Warehouse.
    The time stamp in the source system is 06.06.2008 13:34:56.
    The time stamp in the BW system is 12.07.2007 12:33:40.
    I appriciate your help on this.

    Still the same.
    1. i have deleted the bad requests from the cube.
    2. replicated the data source.
    3. activate the transfer structure.
    4. and then loaded the data,
    But still i am getting the same error message.
    Thanks...

  • Extraction Error: ERROR occured in the data selection

    Hello everybody,
    I have made configurations for the BW connectivity. Finally I was able replicate data sources from R/3 to BW. But when I try to extract the data its giving me the error. In monitor details, in extraction node its showing like "Error occured in data selection."
    Its not giving me any more messages. I think the problem is with the BW connectivity configurations. Its my guess only. Is that right? But I am able to replicate my data sources.
    Please help me.
    Thanks in advance.

    Hi:
    1)Try the RSA3 extractor in R/3.
    2)Try simulate load in InfoPackage.
    If RSA3 is good, and infopackage is giving error, then its connectivity.
    Also, create another infopackage and try again just to make sure.
    Ram Chamarthy

  • Error in data loads-Error occured in the data seletion

    Hi,
    We have to do an init load for Period 10 from data source 0EC_PCA_3.
    When the period changes we usually copy the previous infopack and change the fiscal yesr period and do an init load.
    This time we have to change the fiscal period to 010, we created a new info pack but the fiscal year period we forgot to change and was 009 and scheduled a init load.
    The load failed with error mesg  IN EXTRACTION PART:
    1) syntax error in RSCDELTA
    2) Error occured in the data selection -RSM 340
    REQUEST part in monitor screen is green.
    TRANSFER part in monitor screen is green
    EXTRACTION shows:
    Data request received ---green
    Data selection scheduled -
    green
    Error occurred in the data selection -
    RED
    Processing (data packet): No data ---RED
    We deleted the red request in the ods , deleted the init load in scheduled -init for source system --- chnaged the fiscal yesr period to 010 and triggered a new load but again it gives the same error mesg.
    How to rectify this and do loads to the target successfully.
    Please suggest

    Please check the job log in the source system. It will give you the exact reason why extraction is failing. You need to act accordingly.
    Thanks..
    Shambhu

  • Process chains:Errors Occured..

    i have selected my info objects 0CRM_PROD in rsa1 and  i entered CALL MONITOR FOR BI OBJECT and then i got a monitor screen in that succesfull(42) it says...in that i have selected 0PRODUCT  > TODAY DATE>
    I FOUND THAT CR1 LIENT 100
        02:04:56 (4 From 4 Records)i entered twise on this and i got HEADER  STATUS   DETAILS tabs...
    in above DETAILS tab
    we got a red colour in
    Process chains : Error Occured
    MD : Business partner & Product
    like this... can u please suggest me the resolution for this...
    please help me in this regard , thanks

    Hi -
    Please check
    1) Do you have any Red request
    2) Did you run delta twice
    Regards
    Astoria

  • How to solve "error occurred in the data manipulation engine"? 64bit Windows 7

    Hi all
    I'm having quite a testing time here trying to use the new SAP PA 2.0. After installation the software launches, the Automated Analytics seems to work fine but not the Expert Analytics.
    Steps as follows:
    Launch PA
    Choose and launch Expert Analytics
    Choose Try with Samples
    Open the Dairy Wholesaler file
    Error: An error occurred in the data manipulation engine. Check the manipulation parameters. (HDB 01001)
    I also get this same error when I try to create my own New Dataset.
    I’m on 64bit Windows 7 Pro
    Is there anyone who knows how to solve this problem. I've searched the SCN and online and have tried the following:
    1. Uninstall and re-install. Doesn't help
    2. Uninstall and delete old lumira related folders on the C drive e.g. the SAPPA and SAPVI folders on the C drive, then re-install.
    Much appreciated if anyone could shed some light on this. I've previously had Lumira working with no issues. I've since uninstalled Lumira, Predictive Analytics, and Infinite Insights (as PA 2.0 is all of this combined)
    Regards
    Ria

    In case anyone has the same problem, I found the the following helpful (taken from Error after upgrading to 1.18 ). The solution is for Lumira however its the same steps for PA2
    1.  You might want to try a ‘clean’ uninstall / reinstall . After uninstalling, try deleting these folders:
    C:\Users\Public\sapvi
    C:\Users\<user>\AppData\Local\SAP\Lumira
    C:\Users\<user>\AppData\Local\Temp\sapvi
    In this step I searched for every SAP related file in AppData in the Public, User, and my own username folder under \Users\
    2.  Next, to launch the application, explicitly click "Run as Administrator" on the install file

  • Error occurred in the data uploading from Flat File in BPC NW

    Hi,
    I am doing Migration project from BPC MS to NW.
    In this i am loading data from flat file to BPC NW. One error occured in this process that is Record Duplication.
    Total 17000 records in that  7000 recards rejected by the reason of duplication.
    The Information about Package Log
    /CPMB/MODIFY completed in 0 seconds
    /CPMB/CONVERT completed in 2 seconds
    /CPMB/LOAD completed in 7 seconds
    /CPMB/CLEAR completed in 0 seconds
    [Selection]
    FILE= DATAMANAGER\DATAFILES\Aprilmayjun_2011_Budget_V1.CSV
    TRANSFORMATION= DATAMANAGER\TRANSFORMATIONFILES\ZAPRMAYJUN_2011BUDGET.xls
    CLEARDATA= No
    RUNLOGIC= Yes
    CHECKLCK= No
    [Messages]
    Task name CONVERT:
    No 1 Round:
    Record count: 17064
    Accept count: 17064
    Reject count: 0
    Skip count: 0
    Task name LOAD:
    Reject count: 7230
    Submit count: 9834
    Application: CorpBudget Package status: WARNING
    Could you help me in this at the earliest.
    Thanks and Regards
    Krishna

    Hi,
    You cannot send the duplicated with the standard import package. You need to create or add a new package and link to /CPMB/APPEND process chain and do the import. This would consider the duplicate entries also. It looks like you need somehow load all the records including the duplicate ones.
    So on excel go to Manage Data -> Maintain Data management -> organize package list and add a new package and link to the standard BPC process chain /CPMB/APPEND.
    Thanks,
    Sreeni

  • Error occured for the data source 0uc_isu_27

    Error when updating Idocs in Source System
    Diagnosis
    Errors have been reported in Source System during IDoc update:
    Incomplete control parameter for commmunication wi
    Hi everybody,
    At the time of loading data in to the BW side for the datasource i got an error message.Actually in the source system this data source is extracting the data records. But in the BW side it is giving error. Please help me on this issue. Here i am mentioned the error message actually i got...
    System response
    There are IDocs with incorrect status.
    Procedure
    Check the IDocs in Source System . You can get here using the BW Monitor.
    Removing errors:
    How you remove the errors depends on the error message you receive.

    Hi Dinesh,
    I observed at R/3 side it is showing the error
    Error message text:
    Incomplete control parameter for communication with the BW system
    status text:
    Application document not posted
    Coming to BW side it is giving at RSRQST:
    IDOC sent to R/3 system or external program
    Status text:
    IDOC sent to R/3 system or external program
    Thanks
    Satya

Maybe you are looking for